- 08 Oct, 2011 9 commits
-
-
Paul Gortmaker authored
Both mt9t001.c and mt9p031.c have two identical issues, those being that they will need module.h inclusion for the upcoming cleanup going on there, and that their dependencies don't limit selection of configs that will fail to compile as follows: The related config options are CONFIG_MEDIA_CONTROLLER and CONFIG_VIDEO_V4L2_SUBDEV_API. Looking at the code, it appears that the driver was never intended to work without these enabled, so add a dependency on CONFIG_VIDEO_V4L2_SUBDEV_API, which in turn already has a dependency on CONFIG_MEDIA_CONTROLLER. Reported-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Allow subdevs to return the detected standards Signed-off-by: -
Mauro Carvalho Chehab authored
As msp3400 allows standards detection, add support for it. That efectivelly means that devices with msp3400 can now implement VIDIOC_QUERYSTD, and it will provide very good detection for the standard, specially if combined with a video decoder detection. Signed-off-by: -
Mauro Carvalho Chehab authored
Reorganize the standards macro and add a few more, that will be used on msp3400 in order to allow it to detect the audio standard. Signed-off-by: -
Mauro Carvalho Chehab authored
Acked-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of using V4L2_STD_ALL when no standard is detected, trust that the maximum allowed standards are already filled by the V4L2 core. It is better this way, as the bridge and/or the audio decoder may have some extra restrictions to some video standards. This also allow other devices like audio and tuners to contribute to standards detection, when they support such feature. Signed-off-by: -
Mauro Carvalho Chehab authored
According with the V4L2 API spec: "When detection is not possible or fails, the set must contain all standards supported by the current video input or output." The V4L2 core has the mask with all supported standards already. So, apply it. Driver and subdevs can then just remove standards from the mask, as they're able of detecting audio, video and frames frequency. Signed-off-by: -
Mauro Carvalho Chehab authored
Acked-by:
-
Mauro Carvalho Chehab authored
There are several bugs at saa7115 standards detection: After the fix, the driver is returning the proper standards, as tested with 3 different broadcast sources: On an invalid channel (without any TV signal): [ 4394.931630] saa7115 15-0021: Status byte 2 (0x1f)=0xe0 [ 4394.931635] saa7115 15-0021: detected std mask = 00ffffff With a PAL/M signal: [ 4410.836855] saa7115 15-0021: Status byte 2 (0x1f)=0xb1 [ 4410.837727] saa7115 15-0021: Status byte 1 (0x1e)=0x82 [ 4410.837731] saa7115 15-0021: detected std mask = 00000900 With a NTSC/M signal: [ 4422.383893] saa7115 15-0021: Status byte 2 (0x1f)=0xb1 [ 4422.384768] saa7115 15-0021: Status byte 1 (0x1e)=0x81 [ 4422.384772] saa7115 15-0021: detected std mask = 0000b000 Tests were done with a WinTV PVR USB2 Model 29xx card. Reviewed-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
- 30 Sep, 2011 2 commits
-
-
Dan Carpenter authored
This lock should be released as well on the error path. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Patrick Boettcher <Patrick.Boettcher@dibcom.fr> Cc: Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by:
-
Dan Carpenter authored
Negate has higher precedence than bitwise AND. I2C_M_RD is 0x1 so the original code is equivelent to just checking if (!msg->flags). Signed-off-by:
-
- 27 Sep, 2011 1 commit
-
-
Jonghun Han authored
When satisfied with the try results, applications can set the active formats by setting the which argument to V4L2_SUBDEV_FORMAT_ACTIVE not V4L2_SUBDEV_FORMAT_TRY. Signed-off-by:
Jonghun Han <jonghun.han@samsung.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 26 Sep, 2011 7 commits
-
-
Mauro Carvalho Chehab authored
This reverts commit ea370943. As reported by Stephen Rothwell: After merging the v4l-dvb tree, today's linux-next build (x86_64 allmodconfig) failed like this: ERROR: "sms_dbg" [drivers/media/dvb/siano/smsusb.ko] undefined! ERROR: "sms_dbg" [drivers/media/dvb/siano/smsdvb.ko] undefined! Caused by commit ea370943 ("[media] siano: apply debug flag to module level"). Relevant config: CONFIG_SMS_SIANO_MDTV=m CONFIG_SMS_USB_DRV=m CONFIG_SMS_SDIO_DRV=m Signed-off-by:
-
Michael Olbrich authored
These are necessary to prevent dead-locks e.g. if one thread waits in dqbuf at one end and another tries to queue a buffer at the other end. Signed-off-by:
Michael Olbrich <m.olbrich@pengutronix.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Pawel Osciak <pawel@osciak.com> Acked-by:
Pawel Osciak <pawel@osciak.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Tomasz Stanislawski authored
This patch fixes mbus configuration between Mixer, SDO and HDMI. The SDO accepts only YUV444 on input. The HDMI in DVI mode accepts only RGB888. Now Mixer is choosing proper output format depending on mbus format. Signed-off-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Tomasz Stanislawski authored
Current version of the driver does not support HDMI features not present in DVI standard. Therefore DVI mode is used to keep compatibility with DVI devices. Signed-off-by:
-
Hatim Ali authored
The TVOUT driver requires PM_RUNTIME support for proper clock enabling. Signed-off-by:
Hatim Ali <hatim.rv@samsung.com> Signed-off-by:
-
Chris Rankin authored
Simplifies the locking by moving the em28xx_init_extension() call until em28xx_usb_probe() has finished with the dev->lock mutex. It therefore makes the second and subsequent "plugging" events logically identical to the first "plugging" event when the em28xx-dvb and em28xx-alsa modules must be loaded (i.e. registered). Basically, em28xx_usb_probe() requests that em28xx-dvb be loaded and also triggers udev to initialise the V4L2 devices. These two events are serialised by the dev->lock mutex but the order that they happen in is undefined. But this has always been the case anyway. Signed-off-by:
Chris Rankin <rankincj@yahoo.com> Signed-off-by:
-
Chris Rankin authored
This patch just removes the prototypes for the two functions that I've already deleted in my previous patches. Signed-off-by:
-
- 25 Sep, 2011 5 commits
-
-
Chris Rankin authored
This fixes the deadlock that occurs with either multiple PCTV 290e adapters or when a single PCTV 290e adapter is replugged. For DVB devices, the device lock must now *not* be held when adding/removing either a device or an extension to the respective lists. (Because em28xx_init_dvb() will want to take the lock instead). Conversely, for Audio-Only devices, the device lock *must* be held when adding/removing either a device or an extension to the respective lists. Signed-off-by:
-
Guy Martin authored
Currently, the stv090x driver only set the status bits to SCVYL when there is a lock. This patch set the right bits even if there is no lock. Signed-off-by:
Guy Martin <gmsoft@tuxicoman.be> Signed-off-by:
-
Hans Petter Selasky authored
--HPS >From 18faaafc9cbbe478bb49023bbeae490149048560 Mon Sep 17 00:00:00 2001 Signed-off-by:
Hans Petter Selasky <hselasky@c2i.net> Acked-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Marko Ristola authored
With VDR streaming HDTV into network, generating an interrupt once per 16kb, implemented in this patch, seems to support more robust throughput with HDTV. Fix leaking almost 64kb data from the previous TS after changing the TS. One effect of the old version was, that the DMA transfer and driver's DMA buffer access might happen at the same time - a race condition. Signed-off-by:
Marko M. Ristola <marko.ristola@kolumbus.fi> Reviewed-by:
-
Florent AUDEBERT authored
I noticed a stray 0x00 at init on DiSEqC bus (KNC1 DVB-S2) with a DiSEqC tool analyzer. I removed the register from initialization table and all seem to go well (at least for my KNC board). Signed-off-by:
Florent Audebert <florent.audebert@anevia.com> Acked-by:
-
- 24 Sep, 2011 16 commits
-
-
Chris Rankin authored
This patch closes the race on the device and extension lists at USB disconnect time. Previously, the device was removed from the device list during em28xx_release_resources(), and then passed to the em28xx_close_extension() function so that all extensions could run their fini() operations. However, this left a (brief, theoretical, highly unlikely ;-)) window between these two calls during which a new module could call em28xx_register_extension(). The result would have been that the em28xx_usb_disconnect() function would also have passed the device to the new extension's fini() function, despite never having called the extension's init() function. This patch also restores em28xx_close_extension()'s symmetry with em28xx_init_extension(), and establishes the property that every device in the device list must have been initialised for every extension in the extension list. Signed-off-by:
-
Andy Walls authored
(Resending because Mauro reported losing some emails on IRC) Provide CX2388[578] IR receive timeout (RTO) reports in the final space raw event sent up the chain to the raw IR pulse decoders. This should allow the lirc decoder to actually measure the inter-transmission gap properly. Signed-off-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Sylwester Nawrocki authored
There is no need to put the IRQ number in driver's private platform data structure as this can also be passed in struct i2c_lient.irq. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Switch to generic media bus signal polarity flags and allow configuring the FIELD signal polarity. Signed-off-by:
-
Sylwester Nawrocki authored
FIELD signal is used for indicating frame field type to the frame grabber in interlaced scan mode, as specified in ITU-R BT.601 standard. In normal operation mode FIELD = 0 selects Field1 (odd) and FIELD = 1 selects Field2 (even). When the FIELD signal is inverted it's the other way around. Add corresponding flags for configuring the FIELD signal polarity, V4L2_MBUS_FIELD_EVEN_HIGH for the standard (non-inverted) case and V4L2_MBUS_FIELD_EVEN_LOW for inverted case. Also add a comment about usage of V4L2_MBUS_[HV]SYNC* flags for the hardware that uses [HV]REF signals. Signed-off-by:
-
Igor M. Liplianin authored
Signed-off-by:
Igor M. Liplianin <liplianin@me.by> Signed-off-by:
-
Pekka Enberg authored
This patch converts some ifdef'd wrapper functions from macros to static inline functions to kill the following warnings issued by GCC: CC [M] drivers/media/rc/ir-raw.o drivers/media/rc/ir-raw.c: In function ‘init_decoders’: drivers/media/rc/ir-raw.c:353:2: warning: statement with no effect [-Wunused-value] drivers/media/rc/ir-raw.c:354:2: warning: statement with no effect [-Wunused-value] drivers/media/rc/ir-raw.c:355:2: warning: statement with no effect [-Wunused-value] drivers/media/rc/ir-raw.c:356:2: warning: statement with no effect [-Wunused-value] drivers/media/rc/ir-raw.c:357:2: warning: statement with no effect [-Wunused-value] drivers/media/rc/ir-raw.c:359:2: warning: statement with no effect [-Wunused-value] Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Jarod Wilson <jarod@redhat.com> Cc: <linux-media@vger.kernel.org> Signed-off-by:Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Frank Schaefer authored
Tested with webcam "SilverCrest WC2130". Signed-off-by:
Frank Schaefer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Jean-François Moine authored
As the choice of the alternate setting has been enhanced in the gspca main, forcing its number here is no more useful. Signed-off-by:
-
Jean-François Moine authored
The JPEG quality was guessed as around 82%. Information in ms-win drivers says it should be 85%. Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Some webcams ask for a greater time to start. This patch increases the delay before timeout error on capture start. Signed-off-by:
-
Jean-François Moine authored
This driver is based on Anders Blomdell's source proposed in april 2009. It has been extended to handle the tp6810 bridge and the soi763a sensor. Signed-off-by:
-
