- 25 May, 2017 40 commits
-
-
Ludovic Desroches authored
commit 9cdd31e5 upstream. The voltage reference for the ADC is not 3V but 3.3V since it is connected to VDDANA. Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vladimir Murzin authored
commit 6d805949 upstream. We save/restore registers around v7m_invalidate_l1 to address pointed by r12, which is vector table, so the first eight entries are overwritten with a garbage. We already have stack setup at that stage, so use it to save/restore register. Fixes: 6a8146f4 ("ARM: 8609/1: V7M: Add support for the Cortex-M7 processor") Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Jon Medhurst authored
commit b089c31c upstream. To cope with the variety in ARM architectures and configurations, the pagetable attributes for kernel memory are generated at runtime to match the system the kernel finds itself on. This calculated value is stored in pgprot_kernel. However, when early fixmap support was added for ARM (commit a5f4c561) the attributes used for mappings were hard coded because pgprot_kernel is not set up early enough. Unfortunately, when fixmap is used after early boot this means the memory being mapped can have different attributes to existing mappings, potentially leading to unpredictable behaviour. A specific problem also exists due to the hard coded values not include the 'shareable' attribute which means on systems where this matters (e.g. those with multiple CPU clusters) the cache contents for a memory location can become inconsistent between CPUs. To resolve these issues we change fixmap to use the same memory attributes (from pgprot_kernel) that the rest of the kernel uses. To enable this we need to refactor the initialisation code so build_mem_type_table() is called early enough. Note, that relies on early param parsing for memory type overrides passed via the kernel command line, so we need to make sure this call is still after parse_early_params(). [ardb: keep early_fixmap_init() before param parsing, for earlycon] Fixes: a5f4c561 ("ARM: 8415/1: early fixmap support for earlycon") Tested-by:
afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by:
Jon Medhurst <tixy@linaro.org> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Ard Biesheuvel authored
commit b7ede5a1 upstream. Since commit 35fa91ee ("ARM: kernel: merge core and init PLTs"), the ARM module PLT code allocates all PLT entries in a single core section, since the overhead of having a separate init PLT section is not justified by the small number of PLT entries usually required for init code. However, the core and init module regions are allocated independently, and there is a corner case where the core region may be allocated from the VMALLOC region if the dedicated module region is exhausted, but the init region, being much smaller, can still be allocated from the module region. This puts the PLT entries out of reach of the relocated branch instructions, defeating the whole purpose of PLTs. So split the core and init PLT regions, and name the latter ".init.plt" so it gets allocated along with (and sufficiently close to) the .init sections that it serves. Also, given that init PLT entries may need to be emitted for branches that target the core module, modify the logic that disregards defined symbols to only disregard symbols that are defined in the same section. Fixes: 35fa91ee ("ARM: kernel: merge core and init PLTs") Reported-by:
Angus Clark <angus@angusclark.org> Tested-by:
-
Zhichao Huang authored
commit 661e6b02 upstream. Hardware debugging in guests is not intercepted currently, it means that a malicious guest can bring down the entire machine by writing to the debug registers. This patch enable trapping of all debug registers, preventing the guests to access the debug registers. This includes access to the debug mode(DBGDSCR) in the guest world all the time which could otherwise mess with the host state. Reads return 0 and writes are ignored (RAZ_WI). The result is the guest cannot detect any working hardware based debug support. As debug exceptions are still routed to the guest normal debug using software based breakpoints still works. To support debugging using hardware registers we need to implement a debug register aware world switch as well as special trapping for registers that may affect the host state. Signed-off-by:
Zhichao Huang <zhichao.huang@linaro.org> Signed-off-by:
Alex Bennée <alex.bennee@linaro.org> Reviewed-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
-
Marc Zyngier authored
commit 3d6e77ad upstream. When an interrupt is injected with the HW bit set (indicating that deactivation should be propagated to the physical distributor), special care must be taken so that we never mark the corresponding LR with the Active+Pending state (as the pending state is kept in the physycal distributor). Fixes: 59529f69 ("KVM: arm/arm64: vgic-new: Add GICv3 world switch backend") Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
-
Marc Zyngier authored
commit ddf42d06 upstream. When an interrupt is injected with the HW bit set (indicating that deactivation should be propagated to the physical distributor), special care must be taken so that we never mark the corresponding LR with the Active+Pending state (as the pending state is kept in the physycal distributor). Fixes: 140b086d ("KVM: arm/arm64: vgic-new: Add GICv2 world switch backend") Signed-off-by:
-
Marc Zyngier authored
commit 501ad27c upstream. We like living dangerously. Nothing explicitely forbids stack-protector to be used in the HYP code, while distributions routinely compile their kernel with it. We're just lucky that no code actually triggers the instrumentation. Let's not try our luck for much longer, and disable stack-protector for code living at HYP. Signed-off-by:
-
Marc Zyngier authored
commit cde13b5d upstream. We like living dangerously. Nothing explicitely forbids stack-protector to be used in the EL2 code, while distributions routinely compile their kernel with it. We're just lucky that no code actually triggers the instrumentation. Let's not try our luck for much longer, and disable stack-protector for code living at EL2. Signed-off-by:
-
Michael Neuling authored
commit f48e91e8 upstream. In commit dc310669 ("powerpc: tm: Always use fp_state and vr_state to store live registers"), a section of code was removed that copied the current state to checkpointed state. That code should not have been removed. When an FP (Floating Point) unavailable is taken inside a transaction, we need to abort the transaction. This is because at the time of the tbegin, the FP state is bogus so the state stored in the checkpointed registers is incorrect. To fix this, we treclaim (to get the checkpointed GPRs) and then copy the thread_struct FP live state into the checkpointed state. We then trecheckpoint so that the FP state is correctly restored into the CPU. The copying of the FP registers from live to checkpointed is what was missing. This simplifies the logic slightly from the original patch. tm_reclaim_thread() will now always write the checkpointed FP state. Either the checkpointed FP state will be written as part of the actual treclaim (in tm.S), or it'll be a copy of the live state. Which one we use is based on MSR[FP] from userspace. Similarly for VMX. Fixes: dc310669 ("powerpc: tm: Always use fp_state and vr_state to store live registers") Signed-off-by:
Michael Neuling <mikey@neuling.org> Reviewed-by: cyrilbur@gmail.com Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
commit bfb9956a upstream. The page table dump code doesn't know about huge pages, so currently it crashes (or walks random memory, usually leading to a crash), if it finds a huge page. On Book3S we only see huge pages in the Linux page tables when we're using the P9 Radix MMU. Teaching the code to properly handle huge pages is a bit more involved, so for now just prevent the crash. Fixes: 8eb07b18 ("powerpc/mm: Dump linux pagetables") Signed-off-by:
-
LiuHailong authored
commit fd615f69 upstream. Debug interrupts can be taken during interrupt entry, since interrupt entry does not automatically turn them off. The kernel will check whether the faulting instruction is between [interrupt_base_book3e, __end_interrupts], and if so clear MSR[DE] and return. However, when the kernel is built with CONFIG_RELOCATABLE, it can't use LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) and LOAD_REG_IMMEDIATE(r15,__end_interrupts), as they ignore relocation. Thus, if the kernel is actually running at a different address than it was built at, the address comparison will fail, and the exception entry code will hang at kernel_dbg_exc. r2(toc) is also not usable here, as r2 still holds data from the interrupted context, so LOAD_REG_ADDR() doesn't work either. So we use the *name@got* to get the EV of two labels directly. Test programs test.c shows as follows: int main(int argc, char *argv[]) { if (access("/proc/sys/kernel/perf_event_paranoid", F_OK) == -1) printf("Kernel doesn't have perf_event support\n"); } Steps to reproduce the bug, for example: 1) ./gdb ./test 2) (gdb) b access 3) (gdb) r 4) (gdb) s Signed-off-by:
Liu Hailong <liu.hailong6@zte.com.cn> Signed-off-by:
Jiang Xuexin <jiang.xuexin@zte.com.cn> Reviewed-by:
Jiang Biao <jiang.biao2@zte.com.cn> Reviewed-by:
Liu Song <liu.song11@zte.com.cn> Reviewed-by:
Huang Jian <huang.jian@zte.com.cn> [scottwood: cleaned up commit message, and specified bad behavior as a hang rather than an oops to correspond to mainline kernel behavior] Fixes: 1cb6e064 ("powerpc/book3e: support CONFIG_RELOCATABLE") Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
Alistair Popple authored
commit 6b3d12a9 upstream. Commit 616badd2 ("powerpc/powernv: Use OPAL call for TCE kill on NVLink2") forced all TCE kills to go via the OPAL call for NVLink2. However the PHB3 implementation of TCE kill was still being called directly from some functions which in some circumstances caused a machine check. This patch adds an equivalent IODA2 version of the function which uses the correct invalidation method depending on PHB model and changes all external callers to use it instead. Fixes: 616badd2 ("powerpc/powernv: Use OPAL call for TCE kill on NVLink2") Signed-off-by:
Alistair Popple <alistair@popple.id.au> Signed-off-by:
-
Alexey Kardashevskiy authored
commit e889e96e upstream. The CMA pages migration code does not support compound pages at the moment so it performs few tests before proceeding to actual page migration. One of the tests - PageTransHuge() - has VM_BUG_ON_PAGE(PageTail()) as it is designed to be called on head pages only. Since we also test for PageCompound(), and it contains PageTail() and PageHead(), we can simplify the check by leaving just PageCompound() and therefore avoid possible VM_BUG_ON_PAGE. Fixes: 2e5bbb54 ("KVM: PPC: Book3S HV: Migrate pinned pages out of CMA") Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Tyrel Datwyler authored
commit e76ca277 upstream. For CPUs present at boot each logical CPU acquires a reference to the associated device node of the core. This happens in register_cpu() which is called by topology_init(). The result of this is that we end up with a reference held by each thread of the core. However, these references are never freed if the CPU core is DLPAR removed. This patch fixes the reference leaks by acquiring and releasing the references in the CPU hotplug callbacks un/register_cpu_online(). With this patch symmetric reference counting is observed with both CPUs present at boot, and those DLPAR added after boot. Fixes: f86e4718 ("driver/core: cpu: initialize of_node in cpu's device struture") Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Tyrel Datwyler authored
commit 68baf692 upstream. Historically struct device_node references were tracked using a kref embedded as a struct field. Commit 75b57ecf ("of: Make device nodes kobjects so they show up in sysfs") (Mar 2014) refactored device_nodes to be kobjects such that the device tree could by more simply exposed to userspace using sysfs. Commit 0829f6d1 ("of: device_node kobject lifecycle fixes") (Mar 2014) followed up these changes to better control the kobject lifecycle and in particular the referecne counting via of_node_get(), of_node_put(), and of_node_init(). A result of this second commit was that it introduced an of_node_put() call when a dynamic node is detached, in of_node_remove(), that removes the initial kobj reference created by of_node_init(). Traditionally as the original dynamic device node user the pseries code had assumed responsibilty for releasing this final reference in its platform specific DLPAR detach code. This patch fixes a refcount underflow introduced by commit 0829f6d1, and recently exposed by the upstreaming of the recount API. Messages like the following are no longer seen in the kernel log with this patch following DLPAR remove operations of cpus and pci devices. rpadlpar_io: slot PHB 72 removed refcount_t: underflow; use-after-free. ------------[ cut here ]------------ WARNING: CPU: 5 PID: 3335 at lib/refcount.c:128 refcount_sub_and_test+0xf4/0x110 Fixes: 0829f6d1 ("of: device_node kobject lifecycle fixes") Signed-off-by:
-
Mahesh Salgaonkar authored
commit d93b0ac0 upstream. machine_check_early() gets called in real mode. The very first time when add_taint() is called, it prints a warning which ends up calling opal call (that uses OPAL_CALL wrapper) for writing it to console. If we get a very first machine check while we are in opal we are doomed. OPAL_CALL overwrites the PACASAVEDMSR in r13 and in this case when we are done with MCE handling the original opal call will use this new MSR on it's way back to opal_return. This usually leads to unexpected behaviour or the kernel to panic. Instead move the add_taint() call later in the virtual mode where it is safe to call. This is broken with current FW level. We got lucky so far for not getting very first MCE hit while in OPAL. But easily reproducible on Mambo. Fixes: 27ea2c42 ("powerpc: Set the correct kernel taint on machine check errors.") Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Russell Currey authored
commit daeba295 upstream. eeh_handle_special_event() is called when an EEH event is detected but can't be narrowed down to a specific PE. This function looks through every PE to find one in an erroneous state, then calls the regular event handler eeh_handle_normal_event() once it knows which PE has an error. However, if eeh_handle_normal_event() found that the PE cannot possibly be recovered, it will free it, rendering the passed PE stale. This leads to a use after free in eeh_handle_special_event() as it attempts to clear the "recovering" state on the PE after eeh_handle_normal_event() returns. Thus, make sure the PE is valid when attempting to clear state in eeh_handle_special_event(). Fixes: 8a6b1bc7 ("powerpc/eeh: EEH core to handle special event") Reported-by:
Russell Currey <ruscur@russell.cc> Reviewed-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
David Gibson authored
commit 9765ad13 upstream. powerpc expects IRQs to already be (soft) disabled when switch_mm() is called, as made clear in the commit message of 9c1e1052 ("powerpc: Allow perf_counters to access user memory at interrupt time"). Aside from any race conditions that might exist between switch_mm() and an IRQ, there is also an unconditional hard_irq_disable() in switch_slb(). If that isn't followed at some point by an IRQ enable then interrupts will remain disabled until we return to userspace. It is true that when switch_mm() is called from the scheduler IRQs are off, but not when it's called by use_mm(). Looking closer we see that last year in commit f98db601 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") this was made more explicit by the addition of switch_mm_irqs_off() which is now called by the scheduler, vs switch_mm() which is used by use_mm(). Arguably it is a bug in use_mm() to call switch_mm() in a different context than it expects, but fixing that will take time. This was discovered recently when vhost started throwing warnings such as: BUG: sleeping function called from invalid context at kernel/mutex.c:578 in_atomic(): 0, irqs_disabled(): 1, pid: 10768, name: vhost-10760 no locks held by vhost-10760/10768. irq event stamp: 10 hardirqs last enabled at (9): _raw_spin_unlock_irq+0x40/0x80 hardirqs last disabled at (10): switch_slb+0x2e4/0x490 softirqs last enabled at (0): copy_process+0x5e8/0x1260 softirqs last disabled at (0): (null) Call Trace: show_stack+0x88/0x390 (unreliable) dump_stack+0x30/0x44 __might_sleep+0x1c4/0x2d0 mutex_lock_nested+0x74/0x5c0 cgroup_attach_task_all+0x5c/0x180 vhost_attach_cgroups_work+0x58/0x80 [vhost] vhost_worker+0x24c/0x3d0 [vhost] kthread+0xec/0x100 ret_from_kernel_thread+0x5c/0xd4 Prior to commit 04b96e55 ("vhost: lockless enqueuing") (Aug 2016) the vhost_worker() would do a spin_unlock_irq() not long after calling use_mm(), which had the effect of reenabling IRQs. Since that commit removed the locking in vhost_worker() the body of the vhost_worker() loop now runs with interrupts off causing the warnings. This patch addresses the problem by making the powerpc code mirror the x86 code, ie. we disable interrupts in switch_mm(), and optimise the scheduler case by defining switch_mm_irqs_off(). Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> [mpe: Flesh out/rewrite change log, add stable] Signed-off-by:
-
Johan Hovold authored
commit 0cd273bb upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: e0d3bafd ("V4L/DVB (10954): Add cx231xx USB driver") Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Johan Hovold authored
commit 65f92164 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: e0d3bafd ("V4L/DVB (10954): Add cx231xx USB driver") Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by:
-
Johan Hovold authored
commit fff1abc4 upstream. Make sure to release the snd_card also on a late allocation error. Fixes: e0d3bafd ("V4L/DVB (10954): Add cx231xx USB driver") Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by:
-
Alyssa Milburn authored
commit 950e252c upstream. Otherwise the i2c transfer functions can read or write beyond the end of stack or heap buffers. Signed-off-by:
Alyssa Milburn <amilburn@zall.org> Signed-off-by:
-
Alyssa Milburn authored
commit 821117dc upstream. Return an error rather than memcpy()ing beyond the end of the buffer. Internal callers use appropriate sizes, but digitv_i2c_xfer may not. Signed-off-by:
-
Daniel Scheller authored
commit 158f0328 upstream. Fixes "w_scan -f c" complaining with This dvb driver is *buggy*: the symbol rate limits are undefined - please report to linuxtv.org) Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Acked-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Alyssa Milburn authored
commit ee0fe833 upstream. This code copies actual_length-128 bytes from the header, which will underflow if the received buffer is too small. Signed-off-by:
-
Johan Hovold authored
commit d5823511 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: c4018fa2 ("[media] dib0700: fix RC support on Hauppauge Nova-TD") Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Marek Szyprowski authored
commit a5cb00eb upstream. Clock should be turned off after calling s5p_mfc_init_hw() from the watchdog worker, like it is already done in the s5p_mfc_open() which also calls this function. Fixes: af935746 ("[media] MFC: Add MFC 5.1 V4L2 driver") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Johan Hovold authored
commit aa58fedb upstream. Make sure to check the number of endpoints to avoid accessing memory beyond the endpoint array should a device lack the expected endpoints. Note that, as far as I can tell, the gspca framework has already made sure there is at least one endpoint in the current alternate setting so there should be no risk for a NULL-pointer dereference here. Fixes: b517af72 ("V4L/DVB: gspca_konica: New gspca subdriver for konica chipset using cams") Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Marek Szyprowski authored
commit 0c32b8ec upstream. Interrupt routine must wake process waiting for given interrupt AFTER updating driver's internal structures and contexts. Doing it in-between is a serious bug. This patch moves all calls to the wake() function to the end of the interrupt processing block to avoid potential and real races, especially on multi-core platforms. This also fixes following issue reported from clock core (clocks were disabled in interrupt after being unprepared from the other place in the driver, the stack trace however points to the different place than s5p_mfc driver because of the race): WARNING: CPU: 1 PID: 18 at drivers/clk/clk.c:544 clk_core_unprepare+0xc8/0x108 Modules linked in: CPU: 1 PID: 18 Comm: kworker/1:0 Not tainted 4.10.0-next-20170223-00070-g04e18bc99ab9-dirty #2154 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: pm pm_runtime_work [<c010d8b0>] (unwind_backtrace) from [<c010a534>] (show_stack+0x10/0x14) [<c010a534>] (show_stack) from [<c033292c>] (dump_stack+0x74/0x94) [<c033292c>] (dump_stack) from [<c011cef4>] (__warn+0xd4/0x100) [<c011cef4>] (__warn) from [<c011cf40>] (warn_slowpath_null+0x20/0x28) [<c011cf40>] (warn_slowpath_null) from [<c0387a84>] (clk_core_unprepare+0xc8/0x108) [<c0387a84>] (clk_core_unprepare) from [<c0389d84>] (clk_unprepare+0x24/0x2c) [<c0389d84>] (clk_unprepare) from [<c03d4660>] (exynos_sysmmu_suspend+0x48/0x60) [<c03d4660>] (exynos_sysmmu_suspend) from [<c042b9b0>] (pm_generic_runtime_suspend+0x2c/0x38) [<c042b9b0>] (pm_generic_runtime_suspend) from [<c0437580>] (genpd_runtime_suspend+0x94/0x220) [<c0437580>] (genpd_runtime_suspend) from [<c042e240>] (__rpm_callback+0x134/0x208) [<c042e240>] (__rpm_callback) from [<c042e334>] (rpm_callback+0x20/0x80) [<c042e334>] (rpm_callback) from [<c042d3b8>] (rpm_suspend+0xdc/0x458) [<c042d3b8>] (rpm_suspend) from [<c042ea24>] (pm_runtime_work+0x80/0x90) [<c042ea24>] (pm_runtime_work) from [<c01322c4>] (process_one_work+0x120/0x318) [<c01322c4>] (process_one_work) from [<c0132520>] (worker_thread+0x2c/0x4ac) [<c0132520>] (worker_thread) from [<c0137ab0>] (kthread+0xfc/0x134) [<c0137ab0>] (kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c) ---[ end trace 1ead49a7bb83f0d8 ]--- Fixes: af935746 ("[media] MFC: Add MFC 5.1 V4L2 driver") Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Lee Jones authored
commit 43c0c039 upstream. Currently when the RC Core is enabled (reachable) core code located in cec_register_adapter() attempts to populate the RC structure with a pointer to the 'parent' passed in by the caller. Unfortunately if the caller did not specify RC capability when calling cec_allocate_adapter(), then there will be no RC structure to populate. This causes a "NULL pointer dereference" error. Fixes: f51e8080 ("[media] cec: pass parent device in register(), not allocate()") Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Srinivas Pandruvada authored
commit 5d9854ea upstream. This change undo the change done by 'commit 3bec2474 ("iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3")' as this breaks some USB/i2c sensor hubs. Instead of relying on HW for restoring poll and hysteresis, driver stores and restores on resume (S3). In this way user space modified settings are not lost for any kind of sensor hub behavior. In this change, whenever user space modifies sampling frequency or hysteresis driver will get the feature value from the hub and store in the per device hid_sensor_common data structure. On resume callback from S3, system will set the feature to sensor hub, if user space ever modified the feature value. Fixes: 3bec2474 ("iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3") Reported-by:
Ritesh Raj Sarraf <rrs@researchut.com> Tested-by:
Song, Hongyan <hongyan.song@intel.com> Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Matt Ranostay authored
commit 84ca8e36 upstream. AS3935_WRITE_DATA macro bit is incorrect and the actual write sequence is two leading zeros. Cc: George McCollister <george.mccollister@gmail.com> Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Dan Carpenter authored
commit ee0d8d84 upstream. We should call ipxitf_put() if the copy_to_user() fails. Reported-by:
李强 <liqiang6-s@360.cn> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Johan Hovold authored
commit bec444cd upstream. Add missing sanity check on the non-SuperSpeed hub-descriptor length in order to avoid parsing and leaking two bytes of uninitialised slab data through sysfs removable-attributes (or a compound-device debug statement). Note that we only make sure that the DeviceRemovable field is always present (and specifically ignore the unused PortPwrCtrlMask field) in order to continue support any hubs with non-compliant descriptors. As a further safeguard, the descriptor buffer is also cleared. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Johan Hovold authored
commit 2c25a2c8 upstream. A SuperSpeed hub descriptor does not have any variable-length fields so bail out when reading a short descriptor. This avoids parsing and leaking two bytes of uninitialised slab data through sysfs removable-attributes. Fixes: dbe79bbe ("USB 3.0 Hub Changes") Cc: John Youn <John.Youn@synopsys.com> Acked-by:
-
Johan Hovold authored
commit 6aeb75e6 upstream. Fix a division-by-zero in set_termios when debugging is enabled and a high-enough speed has been requested so that the divisor value becomes zero. Instead of just fixing the offending debug statement, cap the baud rate at the base as a zero divisor value also appears to crash the firmware. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Johan Hovold authored
commit 26cede34 upstream. Drop erroneous cpu_to_le32 when setting the baud rate, something which corrupted the divisor on big-endian hosts. Found using sparse: warning: incorrect type in argument 1 (different base types) expected unsigned int [unsigned] [usertype] val got restricted __le32 [usertype] <noident> Fixes: af2ac1a0 ("USB: serial mct_usb232: move DMA buffers to heap") Reviewed-by:
Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by:
-
Bjørn Mork authored
commit 8d7a10dd upstream. In their infinite wisdom, and never ending quest for end user frustration, Lenovo has decided to use new USB device IDs for the wwan modules in their 2017 laptops. The actual hardware is still the Sierra Wireless EM7455 or EM7430, depending on region. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Daniele Palmas authored
commit 40dd4604 upstream. This patch adds support for Telit ME910 PID 0x1100. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
