- 27 Jun, 2019 26 commits
-
-
Igor Russkikh authored
Update datapath by adding logic related to hardware assisted vlan strip/insert behaviour. Tested-by:
Nikita Danilov <ndanilov@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Updating features and vlan_features with vlan HW offload. Added vlan_tag fields to rx/tx ring_buff to track vlan related data. Tested-by:
-
Igor Russkikh authored
Register declaration macros required to work with vlan offload mode. Tested-by:
-
Igor Russkikh authored
It was noticed some files had -or-later, however overall driver has -only license. Clean this up. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Igor Russkikh authored
Aquantia is resposible now for all new features and bugfixes. Reflect that in MAINTAINERS. Signed-off-by:
-
Igor Russkikh authored
Document contains configuration options description, details and examples of driver various settings. Signed-off-by:
-
Igor Russkikh authored
As it was discussed some time previously, driver is better to report kernel version string, as it in a best way identifies the codebase. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2019-06-26 This series contains updates to ixgbe and i40e only. Mauro S. M. Rodrigues update the ixgbe driver to handle transceivers who comply with SFF-8472 but do not implement the Digital Diagnostic Monitoring (DOM) interface. Update the driver to check the necessary bits to see if DOM is implemented before trying to read the additional 256 bytes in the EEPROM for DOM data. Young Xiao fixes a potential divide by zero issue in ixgbe driver. Aleksandr fixes i40e to recognize 2.5 and 5.0 GbE link speeds so that it is not reported as "Unknown bps". Fixes the driver to read the firmware LLDP agent status during DCB initialization, and to properly log the LLDP agent status to help with debugging when DCB fails to initialize. Martyna fixes i40e for the missing supported and advertised link modes information in ethtool. Jake fixes a function header comment that was incorrect for a PTP function in i40e. Maciej fixes an issue for i40e when a XDP program is loaded the descriptor count gets reset to the default value, resolve the issue by making the current descriptor count persistent across resets. Alice corrects a copyright date which she found to be incorrect. Piotr adds a log entry when the traffic class 0 is added or deleted, which was not being logged previously. Gustavo A. R. Silva updates i40e to use struct_size() where possible. ==================== Signed-off-by: -
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2019-06-27 please apply another round of qeth updates for net-next. This completes the conversion of the control path to use dynamically allocated cmd buffers, along with some fine-tuning for the route validation fix that recently went into -net. ==================== Signed-off-by: -
Julian Wiedmann authored
The cast type currently gets selected in .ndo_start_xmit, and is then piped through several layers until it's stored into the HW header. Push the selection down into qeth_l?_fill_header() to (1) reduce the number of xmit-wide parameters, and (2) merge the two route validation checks into just one. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
As follow-up to commit 0cd6783d ("s390/qeth: check dst entry before use"), consolidate the dst_check() logic into a single helper and add a wrapper around the cast type selection. Signed-off-by:
-
Julian Wiedmann authored
Use napi_gro_receive() to pass up all types of packets that a L3 device may receive. 1) For proper L2 packets received by the IQD sniffer, this is the obvious thing to do. 2) For af_iucv (which doesn't provide a GRO assist), the GRO code will transparently fall back to netif_receive_skb(). So there's no need to special-case this traffic in our code. Signed-off-by:
-
Julian Wiedmann authored
De-duplicate the pm callback implementations from the two sub-drivers, replacing them with core helpers that delegate to the .set_online and .set_offline callbacks. Signed-off-by:
-
Julian Wiedmann authored
Apply some cleanups to qeth_snmp_command() and its callback: 1. when accessing the user data, use the proper struct instead of hard-coded offsets. Also copy the request data straight into the allocated cmd, skipping the extra memdup_user() to a tmp buffer. 2. capping the request length is no longer needed, the same check gets applied at a base level in qeth_alloc_cmd(). 3. clean up some duplicated (and misindented) trace statements. Signed-off-by:
-
Julian Wiedmann authored
Now that all cmds are dynamically allocated, the code for static cmd buffers can go away entirely. Resulting in a nice reduction of code/data size & complexity, while removing the risk that qeth_clear_cmd_buffers() releases cmds that are still in-flight. Signed-off-by:
-
Julian Wiedmann authored
The base MPC cmds are the last remaining user of the static cmd buffers. Port them over to use dynamic allocation, and stop backing the write channel's cmd buffers with pages. Signed-off-by:
-
Julian Wiedmann authored
The VNICC code is somewhat quirky in that it defers the whole cmd setup to a common helper qeth_l2_vnicc_request(). Some of the cmd specifics are then passed in via parameter, while others are simply hard-coded. Split the whole machinery up into the usual format: one helper that allocates the cmd & fills in the common fields, while all the cmd originators take care of their sub-cmd type specific work. This makes it much easier to calculate the cmd's precise length, and reduces code complexity. Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Add a new wrapper that allocates DIAG cmds of the right size, and fills in the common fields. Signed-off-by:
-
Julian Wiedmann authored
This patch converts the adapter, assist and bridgeport cmd paths to dynamic allocation. Most of the work is about re-organizing the cmd headers, calculating the correct cmd length, and filling in the right value in the sub-cmd's length field. Since we now also set the correct length for cmds that are not reflected by a fixed struct (ie SNMP), we can remove the work-around from qeth_snmp_command(). Signed-off-by:
-
Julian Wiedmann authored
For code that uses qeth_send_simple_setassparms_prot(), we currently can't differentiate whether the cmd should contain (1) no parameter, or (2) a 4-byte parameter with value 0. At the moment this doesn't cause any trouble. But when using dynamically allocated cmds, we need to know whether to allocate & transmit an additional 4 bytes of zeroes. So instead of the raw parameter value, pass a parameter pointer (or NULL) to qeth_send_simple_setassparms_prot(). Signed-off-by:
-
Julian Wiedmann authored
This patch reduces the usage of the write channel's static cmd buffers, by dynamically allocating all simple IPA cmds (eg. STARTLAN, SETVMAC). It also converts the OSN path. Doing so requires some changes to how we calculate the cmd length. Currently when building IPA cmds, we're quite generous in how much data we send down to the device (basically the size of the biggest cmd we know). This is no real concern at the moment, since the static cmd buffers are backed with zeroed pages. But for dynamic allocations, the exact length matters. So this patch also adds the needed length calculations to each cmd path. Commands that have multiple subtypes (eg. SETADP) of differing length will be converted with follow-up patches. Signed-off-by:
-
Ursula Braun authored
There are common steps when releasing an accepted or unaccepted socket. Move this code into a common routine. Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Florian Westphal says: ==================== net: ipv4: fix circular-list infinite loop Tariq and Ran reported a regression caused by net-next commit 2638eb8b ("net: ipv4: provide __rcu annotation for ifa_list"). This happens when net.ipv4.conf.$dev.promote_secondaries sysctl is enabled -- we can arrange for ifa->next to point at ifa, so next process that tries to walk the list loops forever. Fix this and extend rtnetlink.sh with a small test case for this. ==================== Signed-off-by:
-
Florian Westphal authored
This exercises the 'promote_secondaries' code path. Without previous fix, this triggers infinite loop/soft lockup: ifconfig process spinning at 100%, never to return. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
secondary address promotion causes infinite loop -- it arranges for ifa->ifa_next to point back to itself. Problem is that 'prev_prom' and 'last_prim' might point at the same entry, so 'last_sec' pointer must be obtained after prev_prom->next update. Fixes: 2638eb8b ("net: ipv4: provide __rcu annotation for ifa_list") Reported-by:
Ran Rozenstein <ranro@mellanox.com> Reported-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Maxime Chevallier authored
When parsing an ethtool_rx_flow_spec, users can specify an ethernet flow which could contain matches based on the ethernet header, such as the MAC address, the VLAN tag or the ethertype. ETHER_FLOW uses the src and dst ethernet addresses, along with the ethertype as keys. Matches based on the vlan tag are also possible, but they are specified using the special FLOW_EXT flag. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Acked-by:
Pablo Neira Ayuso <pablo@gnumonks.org> Signed-off-by:
-
- 26 Jun, 2019 14 commits
-
-
David S. Miller authored
Palmer Dabbelt says: ==================== net: macb: Fix compilation on systems without COMMON_CLK, v2 Our patch to add support for the FU540-C000 broke compilation on at least powerpc allyesconfig, which was found as part of the linux-next build regression tests. This must have somehow slipped through the cracks, as the patch has been reverted in linux-next for a while now. This patch applies on top of the offending commit, which is the only one I've even tried it on as I'm not sure how this subsystem makes it to Linus. This patch set fixes the issue by adding a dependency of COMMON_CLK to the MACB Kconfig entry, which avoids the build failure by disabling MACB on systems where it wouldn't compile. All known users of MACB have COMMON_CLK, so this shouldn't cause any issues. This is a significantly simpler approach than disabling just the FU540-C000 support. I've also included a second patch to indicate this is a driver for a Cadence device that was originally written by an engineer at Atmel. The only relation is that I stumbled across it when writing the first patch. Changes since v1 <20190624061603.1704-1-palmer@sifive.com>: * Disable MACB on systems without COMMON_CLK, instead of just disabling the FU540-C000 support on these systems. * Update the commit message to reflect the driver was written by Atmel. ==================== Signed-off-by: -
Palmer Dabbelt authored
The help text makes it look like NET_VENDOR_CADENCE enables support for Atmel devices, when in reality it's a driver written by Atmel that supports Cadence devices. This may confuse users that have this device on a non-Atmel SoC. The fix is just s/Atmel/Cadence/, but I did go and re-wrap the Kconfig help text as that change caused it to go over 80 characters. Signed-off-by:
Palmer Dabbelt <palmer@sifive.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Palmer Dabbelt authored
commit c218ad55 ("macb: Add support for SiFive FU540-C000") added a dependency on the common clock framework to the macb driver, but didn't express that dependency in Kconfig. As a result macb now fails to compile on systems without COMMON_CLK, which specifically causes a build failure on powerpc allyesconfig. This patch adds the dependency, which results in the macb driver no longer being selectable on systems without the common clock framework. All known systems that have this device already support the common clock framework, so this should not cause trouble for any uses. Supporting both the FU540-C000 and systems without COMMON_CLK is quite ugly. I've build tested this on powerpc allyesconfig and RISC-V defconfig (which selects MACB), but I have not even booted the resulting kernels. Fixes: c218ad55 ("macb: Add support for SiFive FU540-C000") Signed-off-by:
-
Dave Taht authored
The longstanding prohibition against using 0.0.0.0/8 dates back to two issues with the early internet. There was an interoperability problem with BSD 4.2 in 1984, fixed in BSD 4.3 in 1986. BSD 4.2 has long since been retired. Secondly, addresses of the form 0.x.y.z were initially defined only as a source address in an ICMP datagram, indicating "node number x.y.z on this IPv4 network", by nodes that know their address on their local network, but do not yet know their network prefix, in RFC0792 (page 19). This usage of 0.x.y.z was later repealed in RFC1122 (section 3.2.2.7), because the original ICMP-based mechanism for learning the network prefix was unworkable on many networks such as Ethernet (which have longer addresses that would not fit into the 24 "node number" bits). Modern networks use reverse ARP (RFC0903) or BOOTP (RFC0951) or DHCP (RFC2131) to find their full 32-bit address and CIDR netmask (and other parameters such as default gateways). 0.x.y.z has had 16,777,215 addresses in 0.0.0.0/8 space left unused and reserved for future use, since 1989. This patch allows for these 16m new IPv4 addresses to appear within a box or on the wire. Layer 2 switches don't care. 0.0.0.0/32 is still prohibited, of course. Signed-off-by:
Dave Taht <dave.taht@gmail.com> Signed-off-by:
John Gilmore <gnu@toad.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
David Ahern authored
dst_default_metrics has all of the metrics initialized to 0, so nothing will be added to the skb in rtnetlink_put_metrics. Avoid the loop if metrics is from dst_default_metrics. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David S. Miller authored
Puranjay Mohan says: ==================== net: fddi: skfp: Use PCI generic definitions instead of private duplicates This patch series removes the private duplicates of PCI definitions in favour of generic definitions defined in pci_regs.h. This driver only uses some of the generic PCI definitons, which are included from pci_regs.h and thier private versions are removed from skfbi.h with all other private defines. The skfbi.h defines PCI_REV_ID and other private defines with different names, these are renamed to Generic PCI names to make them compatible with defines in pci_regs.h. All unused defines are removed from skfbi.h. Changes in v5: Removed unused PCI definitions which were left in v4 Changes in v4: Removed unused PCI definitions which were left in v3 Changes in v3: Renamed all local PCI definitions to Generic names. Corrected coding style mistakes. Changes in v2: Converted individual patches to a series. Made sure that individual patches build correctly ==================== Signed-off-by: -
Puranjay Mohan authored
Remove unused private PCI definitions from skfbi.h because generic PCI symbols are already included from pci_regs.h. Signed-off-by:
Puranjay Mohan <puranjay12@gmail.com> Signed-off-by:
-
Puranjay Mohan authored
Include the uapi/linux/pci_regs.h header file which contains the generic PCI defines. Signed-off-by:
-
Puranjay Mohan authored
Rename the PCI_REV_ID and other local defines to Generic PCI define names in skfbi.h and drvfbi.c to make it compatible with the pci_regs.h. Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2019-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valu says: ==================== wireless-drivers-next patches for 5.3 First set of patches for 5.3, but not that many patches this time. This pull request fails to compile with the tip tree due to ktime_get_boot_ns() API changes there. It should be easy for Linus to fix it in p54 driver once he pulls this, an example resolution here: https://lkml.kernel.org/r/20190625160432.533aa140@canb.auug.org.au Major changes: airo * switch to use skcipher interface p54 * support boottime in scan results rtw88 * add fast xmit support * add random mac address on scan support rt2x00 * add software watchdog to detect hangs, it's disabled by default ==================== Signed-off-by:
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct virtchnl_iwarp_qvlist_info { ... struct virtchnl_iwarp_qv_info qv_info[1]; }; size = sizeof(struct virtchnl_iwarp_qvlist_info) + (sizeof(struct virtchnl_iwarp_qv_info) * count; instance = kzalloc(size, GFP_KERNEL); and struct virtchnl_vf_resource { ... struct virtchnl_vsi_resource vsi_res[1]; }; size = sizeof(struct virtchnl_vf_resource) + sizeof(struct virtchnl_vsi_resource) * count; instance = kzalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, qv_info, count), GFP_KERNEL); and instance = kzalloc(struct_size(instance, vsi_res, count), GFP_KERNEL); Notice that, in the first case above, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by:"Gustavo A. R. Silva" <gustavo@embeddedor.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alice Michael authored
It was found that the string that prints our copyright was not up to date. Updating to reflect our copyright. Signed-off-by:
Alice Michael <alice.michael@intel.com> Tested-by:
-
Maciej Fijalkowski authored
Changing descriptor count via 'ethtool -G' is not persistent across resets. When PF reset occurs, we roll back to the default value of vsi->num_desc, which is used then in i40e_alloc_rings to set descriptor count. XDP does a PF reset so when user has changed the descriptor count and load XDP program, the default count will be back there. To fix this: * introduce new VSI members - num_tx_desc and num_rx_desc in favour of num_desc * set them in i40e_set_ringparam to user's values * set them to default values in i40e_set_num_rings_in_vsi only when they don't have previous values Signed-off-by:Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by:
-
Aleksandr Loktionov authored
This patch fixes reading f/w LLDP agent status at DCB init time. It's done by removing direct NVM reading in i40e_update_dcb_config() and checking whether f/w LLDP agent is disabled via I40E_FLAG_DISABLE_FW_LLDP flag in i40e_init_pf_dcb(). The function i40e_update_dcb_config() in i40e_main.c is a temporary solution which will be later renamed to i40e_init_dcb() in the i40e_dcb module. Also logging was extended to make visible if f/w LLDP agent is running or not and always log a message when DCB was not initialized. Without this patch for new f/w versions f/w LLDP agent status was always read from NVM as disabled and DCB initialization failed without clear reason in logs. Signed-off-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by:
-
