Enable support for the new hardware that was added in the devicetree.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The OST driver provides a clocksource and sched_clock that are much more
accurate than the default ones.

The PWM driver allows to use the PWM pins on the external header of the
board.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Add support for the face buttons, the ACT8600 PMUC, the LCD panel
with backlight, the rumble, internal/external SD readers, and other
things.

Note that the otg-phy node was dropped in the process as it was neither
useful nor used, and was inside a non-compliant board "bus".
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Add support for the RTC, AIC, CODEC, MMC 0/1/2, ADC, GPU, LCD,
USB OTG, USB PHY controllers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Add the TCU nodes to the JZ4780, JZ4770 and JZ4740 devicetree files.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

If N fields of X cells should be provided, then that's what the
devicetree should represent, instead of having one single field of
(N*X) cells.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The driver requires two cells and not just one.

Since these nodes are both disabled as no hardware currently use them,
this fix does not really requires a Fixes: tag.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Sort the members of enum in alphabetical order is better to avoid
duplicate mistakes (because the list may be grow very large), so
fix it by exchanging the order.
Signed-off-by: Liangliang Huang <huangll@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Read the address of host bridge configuration space to get the vendor ID
and device ID of host bridge, and then we can distinguish various types
of host bridge such as LS7A or RS780E.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Fix the following coccicheck warning:

arch/mips/oprofile/common.c:113:2-3: Unneeded semicolon
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Loongson-2K (Loongson64 Reduced) is a family of SoC shipped with
gs264e core.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

In order to use perf tool on the Loongson platform, we should enable kernel
support for various performance events provided by software and hardware,
so add CONFIG_PERF_EVENTS=y to loongson3_defconfig.

E.g. without this patch:

[loongson@localhost perf]$ ./perf list

List of pre-defined events (to be used in -e):

  duration_time                                      [Tool event]

  rNNN                                               [Raw hardware event descriptor]
  cpu/t1=v1[,t2=v2,t3 ...]/modifier                  [Raw hardware event descriptor]
   (see 'man perf-list' on how to encode it)

  mem:<addr>[/len][:access]                          [Hardware breakpoint]

With this patch:

[loongson@localhost perf]$ ./perf list

List of pre-defined events (to be used in -e):

  branch-instructions OR branches                    [Hardware event]
  branch-misses                                      [Hardware event]
  cpu-cycles OR cycles                               [Hardware event]
  instructions                                       [Hardware event]

  alignment-faults                                   [Software event]
  bpf-output                                         [Software event]
  context-switches OR cs                             [Software event]
  cpu-clock                                          [Software event]
  cpu-migrations OR migrations                       [Software event]
  dummy                                              [Software event]
  emulation-faults                                   [Software event]
  major-faults                                       [Software event]
  minor-faults                                       [Software event]
  page-faults OR faults                              [Software event]
  task-clock                                         [Software event]

  duration_time                                      [Tool event]

  L1-dcache-load-misses                              [Hardware cache event]
  L1-dcache-store-misses                             [Hardware cache event]
  L1-icache-load-misses                              [Hardware cache event]
  branch-load-misses                                 [Hardware cache event]
  branch-loads                                       [Hardware cache event]
  dTLB-load-misses                                   [Hardware cache event]
  dTLB-store-misses                                  [Hardware cache event]
  iTLB-load-misses                                   [Hardware cache event]

  rNNN                                               [Raw hardware event descriptor]
  cpu/t1=v1[,t2=v2,t3 ...]/modifier                  [Raw hardware event descriptor]
   (see 'man perf-list' on how to encode it)

  mem:<addr>[/len][:access]                          [Hardware breakpoint]
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

MIPS define a "Fill" macro as a cache operation in cacheops.h, this
will cause build failure under some special configurations because in
seq_file.c there is a "Fill" label. To avoid this failure we rename the
"Fill" macro to "Fill_I" which has the same coding style as other cache
operations in cacheops.h (we think renaming the "Fill" macro is more
reasonable than renaming the "Fill" label).

Callers of "Fill" macro is also updated.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

XContext might be dirty at boot time. We need to clear it
to ensure early stackframe is safe.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Use mp_ops->send_ipi_single() instead of mp_ops->send_ipi_mask() in
arch_send_call_function_single_ipi(). send_ipi_single() can send
IPI signal to a special cpu more efficiently.
Signed-off-by: Liangliang Huang <huangll@lemote.com>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

1, Add unaligned gslq, gssq, gslqc1, gssqc1 emulation;
2, Add unaligned gsl{h, w, d}x, gss{h, w, d}x emulation;
3, Add unaligned gslwxc1, gsswxc1, gsldxc1, gssdxc1 emulation.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Pei Huang <huangpei@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Move unaligned load/store helpers from unaligned.c to inst.h, then
other parts of the kernel can use these helpers.

Use __ASSEMBLY__ to guard the definition of "LONG" in asm.h to avoid
build error on IPxx platforms.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Pei Huang <huangpei@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

mm_isBranchInstr() is declared both in branch.h and in fpu_emulator.h
but the two declarations are conflict. If both of them are included by
a same file, they will cause a build error:

./arch/mips/include/asm/branch.h:33:19: error: static declaration of 'mm_isBranchInstr' follows non-static declaration
 static inline int mm_isBranchInstr(struct pt_regs *regs,
                   ^
./arch/mips/include/asm/fpu_emulator.h:177:5: note: previous declaration of 'mm_isBranchInstr' was here
 int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,

Fix this error by removing both isBranchInstr() and mm_isBranchInstr()
in fpu_emulator.h, and declaring both of them in branch.h.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Looks like I misread the Kconfig magic and this driver can be compiled
into 32-bit kernels.  Add back the hack to extent the range of the
resource_size_t, and include the header with the txx9-specific ioremap
magic for that.

Fixes: acfaaf52 ("ASoC: txx9: don't work around too small resource_size_t")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

In the current code, if CONFIG_SWIOTLB is set, when failed to get IO TLB
memory from the low pages by plat_swiotlb_setup(), it may lead to the boot
process failed with kernel panic.

(1) On the Loongson and SiByte platform
arch/mips/loongson64/dma.c
arch/mips/sibyte/common/dma.c
void __init plat_swiotlb_setup(void)
{
	swiotlb_init(1);
}

kernel/dma/swiotlb.c
void  __init
swiotlb_init(int verbose)
{
...
	vstart = memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
	if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose))
		return;
...
	pr_warn("Cannot allocate buffer");
	no_iotlb_memory = true;
}

phys_addr_t swiotlb_tbl_map_single()
{
...
	if (no_iotlb_memory)
		panic("Can not allocate SWIOTLB buffer earlier ...");
...
}

(2) On the Cavium OCTEON platform
arch/mips/cavium-octeon/dma-octeon.c
void __init plat_swiotlb_setup(void)
{
...
	octeon_swiotlb = memblock_alloc_low(swiotlbsize, PAGE_SIZE);
	if (!octeon_swiotlb)
		panic("%s: Failed to allocate %zu bytes align=%lx\n",
		      __func__, swiotlbsize, PAGE_SIZE);
...
}

Because IO_TLB_DEFAULT_SIZE is 64M, if the rest size of low memory is less
than 64M when call plat_swiotlb_setup(), we can easily reproduce the panic
case.

In order to reduce the possibility of kernel panic when failed to get IO
TLB memory under CONFIG_SWIOTLB, it is better to allocate low memory as
small as possible before plat_swiotlb_setup(), so make sparse_init() using
top-down allocation.
Reported-by: Juxin Gao <gaojuxin@loongson.cn>
Co-developed-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

In the current code, plat_mem_setup() is called by arch_mem_init() instead
of setup_arch() and has been declared in asm/bootinfo.h, so modify the code
comment to reflect the reality and remove the useless duplicate declartion
in arch/mips/kernel/setup.c.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Fix the following checkpatch error:

ERROR: do not initialise globals to 0
#834: FILE: arch/mips/kernel/setup.c:834:
+int hw_coherentio = 0;	/* Actual hardware supported DMA coherency setting. */
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This driver is using some dangerous hack to set MMIO address for HPET,
which might break systems with other kinds of PCH.

Also, as Loongson-3 cpufreq driver never appeared in mainline,
this driver rarely got used.

So we temporarily mark it as broken until we find a better solution.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Add ACPI Controller Node for RS780E PCH to fit newly added driver.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This controller is attached under ISA Bus and can be found
in Loongson-3 systems with RS780E PCH.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Make RS780E ACPI as a platform driver so we can enable it
by DeviceTree selectively.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

RTC is now enabled by devicetree. So platform code is
no longer needed.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

IOremap changes caused following build error:

arch/mips/alchemy/common/setup.c:99:9: error: implicit declaration of function
+‘remap_pfn_range’; did you mean ‘io_remap_pfn_range’?
+[-Werror=implicit-function-declaration]

Fixed my including linux/mm.h

Fixes: d3991572 ("MIPS: cleanup fixup_bigphys_addr handling")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

There is a unique MAC address programmed into the eFuses
of the JZ4780 chip in the CI20 factory. By using this
for initializing the DM9000 Ethernet controller, every
CI20 board has an individual - but stable - MAC address
and DHCP can assign stable IP addresses.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This patch brings support for the JZ4780 efuse. Currently it only exposes
a read only access to the entire 8K bits efuse memory and the
ethernet mac address for the davicom dm9000 chip on the CI20 board.

It also changes the nemc ranges definition to give the driver
access to the efuse registers, which are in the middle of the
nemc reg range.
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Use the generic ioremap_page_range helper instead of reimplementing it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Neither of these interfaces is anywhere near the fast path.  Move them
out of line and avoid exposing implementation details to the drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Split out the mips64 ioremap implementation entirely, as it will never use
page table based remapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

There is no reason to have two ioremap with flags interfaces.  Merge
the historic mips __ioremap_mode into ioremap_prot which is a generic
kernel interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

fixup_bigphys_addr is only provided by the alchemy platform.  Remove
all the stubs, and ensure we only call it if it is actually implemented.

Also don't bother implementing io_remap_pfn_range if we don't have to,
and move the remaining implementation to alchemy platform code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This macro is identical to CONFIG_64BIT, and using a Kconfig variable
for the only places that checks them (the ioremap implementation) will
simplify later patches in this series.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The txx9 sound driver deends on HAS_TXX9_ACLC, which is only set for
three tx49xx SOCs, and thus always has a 64-bit phys_addr_t and
resource_size_t.  Instead of poking into ioremap internals to work
around a potentially too small resource_size_t just add a BUILD_BUG_ON
to catch such a case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Fix the following coccicheck warning:

arch/mips/netlogic/xlr/fmn.c:106:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

As platforms are moving to COMMON_CLK in general, loongson2ef
stuck out as something that has a private implementation but
does not actually use it except for setting the frequency of
the CPU itself from the loongson2_cpufreq driver.

Change that driver to call the register setting function directly
and remove the rest of the stub implementation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

There is typo for macro user_ld if __ASSEMBLY__ is declared, this
patch fixes this issue.
Signed-off-by: bibo mao <maobibo@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>