- 20 Nov, 2019 40 commits
-
-
Chao Yu authored
[ Upstream commit 0b2103e8 ] It needs to release memory allocated for sbi->write_io in error path, otherwise, it will cause memory leak. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric W. Biederman authored
[ Upstream commit 4a63c1ff ] For userspace to tell the difference between an random signal and an exception, the exception must include siginfo information. Using SEND_SIG_FORCED for SIGSEGV is thus wrong, and it will result in userspace seeing si_code == SI_USER (like a random signal) instead of si_code == SI_KERNEL or a more specific si_code as all exceptions deliver. Therefore replace force_sig_info(SIGSEGV, SEND_SIG_FORCE, current) with force_sig(SIG_SEGV, current) which gets this right and is shorter and easier to type. Fixes: 791eca10 ("uretprobes/x86: Hijack return address") Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 55a3235f ] For userspace to tell the difference between a random signal and an exception, the exception must include siginfo information. Using SEND_SIG_FORCED for SIGILL is thus wrong, and it will result in userspace seeing si_code == SI_USER (like a random signal) instead of si_code == SI_KERNEL or a more specific si_code as all exceptions deliver. Therefore replace force_sig_info(SIGILL, SEND_SIG_FORCE, current) with force_sig(SIG_ILL, current) which gets this right and is shorter and easier to type. Fixes: 014940ba ("uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails") Fixes: 0b5256c7 ("uprobes: Send SIGILL if handle_trampoline() fails") Reviewed-by:
-
Eric W. Biederman authored
[ Upstream commit 86989c41 ] If the first process started (aka /sbin/init) receives a SIGKILL it will panic the system if it is delivered. Making the system unusable and undebugable. It isn't much better if the first process started receives SIGSTOP. So always ignore SIGSTOP and SIGKILL sent to init. This is done in a separate clause in sig_task_ignored as force_sig_info can clear SIG_UNKILLABLE and this protection should work even then. Reviewed-by:
-
Michael J. Ruhl authored
[ Upstream commit 2bf4b33f ] If the set_txreq_header_agh() function returns an error, the exit path is chosen. In this path, the code fails to set the return value. This will cause the caller to not realize an error has occurred. Set the return value correctly in the error path. Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit f1a31542 ] The error code isn't set on this path. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 0b515abb ] We switched this code from spin_lock_bh() to vanilla spin_lock() but there was one stray spin_unlock_bh() that was overlooked. This patch converts it to spin_unlock() as well. Fixes: d8570d01 ("dmaengine: at_xdmac: move spin_lock_bh to spin_lock in tasklet") Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 6df0580b ] Various documented examples on how to set up tx99 with ath9k rely on setting up a regular monitor interface for setting the channel. My previous patch "ath9k: fix tx99 with monitor mode interface" made it possible to set it up this way again. However, it was removing support for using an active monitor interface, which is required for controlling the bitrate as well, since the bitrate is not passed down with a regular monitor interface. This patch partially reverts the previous one, but keeps support for using a regular monitor interface to keep documented steps working in cases where the bitrate does not matter Fixes: d9c52fd1 ("ath9k: fix tx99 with monitor mode interface") Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit c778ec85 ] The IRQ is requested before the struct rtc is allocated and registered, but this struct is used in the IRQ handler. This may lead to a NULL pointer dereference. Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc before requesting the IRQ. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit babab2f8 ] The IRQ is requested before the struct rtc is allocated and registered, but this struct is used in the IRQ handler. This may lead to a NULL pointer dereference. Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc before requesting the IRQ. Acked-by:
Eddie Huang <eddie.huang@mediatek.com> Signed-off-by:
-
Qiuxu Zhuo authored
[ Upstream commit dcc960b2 ] Users of the mce_register_decode_chain() are called for every logged error. EDAC drivers should check: 1) Is this a memory error? [bit 7 in status register] 2) Is there a valid address? [bit 58 in status register] 3) Is the address a system address? [bitfield 8:6 in misc register] The sb_edac driver performed test "1" twice. Waited far too long to perform check "2". Didn't do check "3" at all. Fix it by moving the test for valid address from sbridge_mce_output_error() into sbridge_mce_check_error() and add a test for the type immediately after. Delete the redundant check for the type of the error from sbridge_mce_output_error(). Signed-off-by:
Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180907230828.13901-2-tony.luck@intel.com [ Re-word commit message. ] Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Daniel Silsby authored
[ Upstream commit 83ef4fb7 ] Func jz4780_dma_desc_residue() expects the index to the next hw descriptor as its last parameter. Caller func jz4780_dma_tx_status(), however, applied modulus before passing it. When the current hw descriptor was last in the list, the index passed became zero. The resulting excess of reported residue especially caused problems with cyclic DMA transfer clients, i.e. ALSA AIC audio output, which rely on this for determining current DMA location within buffer. Combined with the recent and related residue-reporting fixes, spurious ALSA audio underruns on jz4770 hardware are now fixed. Signed-off-by:
Daniel Silsby <dansilsby@gmail.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Tested-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
Paul Cercueil authored
[ Upstream commit c558ecd2 ] If we make this driver depend on MACH_JZ4780, that means it can be enabled only if we're building a kernel specially crafted for a JZ4780-based board, while most GNU/Linux distributions will want one generic MIPS kernel that works on multiple boards. Signed-off-by:
-
Chunfeng Yun authored
[ Upstream commit 0eae4958 ] The vbus rise & fall interrupts are used to enable and disable U3 function of device automatically, this cause some issues when class driver is initialized as deactivated, and will skip over software-controlled connect by pullup(), but UDC wants to keep disconnect until usb_gadget_activate() is called which calls pullup() if needed. So we disable vbus rise & fall interrupts and just use pullup() to enable & disable U3 function, and reset mtu3 state when disconnect instead when vbus fall. Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 62623718 ] S2MPS14 PMIC interrupt line on Exynos3250-based Artik5 evaluation board has external pull-up resistors, so disable any pull control for it in controller node. This fixes support for S2MPS14 PMIC interrupts and enables operation of wakeup from S2MPS14 RTC alarm. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Vicente Bergas authored
[ Upstream commit bcdb578a ] The pin is GPIO4-D1 not GPIO1-D1, see schematic, page 15 for reference. Signed-off-by:
Vicente Bergas <vicencb@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Sudeep Holla authored
[ Upstream commit ca64b719 ] Replace all the memcpy() for copying name strings from the firmware with strlcpy() to make sure we are bounded by the source buffer size and we also always have NULL-terminated strings. This is needed to avoid out of bounds accesses if the firmware returns a non-terminated string. Reported-by:
Olof Johansson <olof@lixom.net> Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Uwe Kleine-König authored
[ Upstream commit ff28915f ] include/trace/events/sched.h includes <linux/sched.h> (via <linux/sched/numa_balancing.h>) and so knows about the TASK_* constants used to interpret .prev_state. So instead of duplicating the magic numbers make use of the defined macros to ease understanding the mapping from state bits to letters which isn't completely intuitive for an outsider. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel@pengutronix.de Link: http://lkml.kernel.org/r/20180905093636.24068-1-u.kleine-koenig@pengutronix.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 7e6f4c5d ] LLVM has a warning that tags expressions like: if (foo && non-bool-const) This pattern triggers for CONFIG_SCHED_DEBUG=n where sched_feat() ends up being whatever bit we select. Avoid the warning with an explicit cast to bool. Reported-by:
Philipp Klocke <philipp97kl@gmail.com> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 09317da3 ] if failover_register failed, 'err' code should be set correctly Fixes: cfc80d9a ("net: Introduce net_failover driver") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jaegeuk Kim authored
[ Upstream commit 5ce80586 ] Sometimes, some merged IOs could get a chance to be submitted, resulting in system hang in shutdown test. This issues IOs all the time after shutdown. Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit 1ae00833 ] This is needed to make the display and venc work properly. Compare to omap3-beagle.dts. Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit fa99c21e ] Vendor defined U-Boot has changed the partition scheme a while ago: * kernel partition 6MB * file system partition uses the remainder up to end of the NAND * increased size of the environment partition (to get an OneNAND compatible base address) * shrink the U-Boot partition Let's be compatible (e.g. Debian kernel built from upstream). Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit 7384a242 ] we fix penirq polarity, add penirq pinmux and touchscreen properties. Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit 8905592b ] The omap dss susbystem takes the display aliases to find out which displays exist. To enable tv-out we must define an alias. Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit f6591391 ] * fix connector compatibility (composite) * add comment for gpio1 23 * add proper #address-cells * we use only one venc_out channel for composite Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit fa0d7dc3 ] needed for device variants based on GTA04 board but with different display panel (driver). Signed-off-by:
-
Rob Herring authored
[ Upstream commit f6707fd6 ] Cache nodes under the cpu node(s) is PowerMac specific according to the comment above, so make the code enforce that. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Suman Tripathi authored
[ Upstream commit 20bdc376 ] Due to hardware errata, Ampere Computing eMAG SATA can't support AHCI ALPM feature. This patch disables the AHCI ALPM feature for eMAG SATA. Signed-off-by:
Suman Trpathi <stripathi@amperecomputing.com> Signed-off-by:
Rameshwar Prasad Sahu <rameshwar.sahu@amperecomputing.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Yong Zhi authored
[ Upstream commit 3b857472 ] Playback of 44.1Khz contents with HDMI plugged returns "Invalid pipe config" because HDMI paths in the FW topology are configured to operate at 48Khz. This patch filters out sampling rates not supported at hdac_hdmi_create_dais() to let user space SRC to do the converting. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit fc269c03 ] Commit 4a75aae1 ("ASoC: dapm: Add support for multi-CODEC CODEC to CODEC links") adds loops that iterate over multiple CODECs in snd_soc_dai_link_event. This also introduced a compiler warning for a potentially uninitialised variable in the case no CODECs are present. This should never be the case as the DAI link must by definition contain at least 1 CODEC however probably best to avoid the compiler warning by initialising ret to zero. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Jan Kara authored
[ Upstream commit b085fbe2 ] Fix a crash during an attempt to mount a filesystem that has both Unallocated Space Table and Unallocated Space Bitmap. Such filesystem actually violates the UDF standard so we just have to properly detect such situation and refuse to mount such filesystem read-write. When we are at it, verify also other constraints on the allocation information mandated by the standard. Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Ding Xiang authored
[ Upstream commit c6e1241a ] if device_register return error, iounmap should be called, also iounmap need to call before put_device. Signed-off-by:
Ding Xiang <dingxiang@cmss.chinamobile.com> Reviewed-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20476/ Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Parav Pandit authored
[ Upstream commit c715a395 ] During register_device() init sequence is, (a) register with rdma cgroup followed by (b) register with sysfs Therefore, unregister_device() sequence should follow the reverse order. Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Parav Pandit authored
[ Upstream commit f9d08f1e ] While registering a mad agent, a user space can trigger various errors and flood the logs. Therefore, decrease verbosity and rate limit such error messages. While we are at it, use __func__ to print function name. Signed-off-by:
-
Muhammad Sammar authored
[ Upstream commit 142a9c28 ] It is illegal to change MTU to a value lower than the minimum MTU stated in ethernet spec. In addition to that we need to add 4 bytes for encapsulation header (IPOIB_ENCAP_LEN). Before "ifconfig ib0 mtu 0" command, succeeds while it obviously shouldn't. Signed-off-by:
Muhammad Sammar <muhammads@mellanox.com> Reviewed-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
-
Parav Pandit authored
[ Upstream commit 6c75520f ] mdev->state device state is not protected by the QP for which WRs are being processed. Therefore, there is no need to hold spin lock while checking mdev state. Given that device fatal error is unlikely situation, wrap the condition check with unlikely(). Additionally, kernel QP1 is also a kernel ULP for which soft CQEs needs to be generated. Therefore, check for device fatal error before processing QP1 work requests. Fixes: 89ea94a7 ("IB/mlx5: Reset flow support for IB kernel ULPs") Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Jun Gao authored
[ Upstream commit fc66b39f ] DMA mode will always be used in i2c transactions, try to allocate a DMA safe buffer if the buf of struct i2c_msg used is not DMA safe. Signed-off-by:
Jun Gao <jun.gao@mediatek.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Erik Stromdahl authored
[ Upstream commit 37f62c0d ] This is done in order not to trig the below warning in ieee80211_rx_napi: WARN_ON_ONCE(softirq_count() == 0); ieee80211_rx_napi requires that softirq's are disabled during execution. The High latency bus drivers (SDIO and USB) sometimes call the wmi ep_rx_complete callback from non softirq context, resulting in a trigger of the above warning. Calling ieee80211_rx_ni with softirq's already disabled (e.g., from softirq context) should be safe as the local_bh_disable and local_bh_enable functions (called from ieee80211_rx_ni) are fully reentrant. Signed-off-by:
Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit ef2ecab9 ] S5M8767 PMIC interrupt line on Exynos5250-based Arndale board has external pull-up resistors, so disable any pull control for it in in controller node. This fixes support for S5M8767 interrupts and enables operation of wakeup from S5M8767 RTC alarm. Signed-off-by:
-
