- 09 Jul, 2013 4 commits
-
-
Ville Syrjälä authored
I just got confirmation that we're using some old values for the PLL LPF coefficients for DP RBR/HDMI/DAC on VLV. The VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_9 document lists both values by mistake, and apparently we had picked the wrong one. Change the coefficients to the recommended values. Changing the value doesn't appear to destabilize the VGA output picture even with my sensitive HP ZR24w display. Also HDMI output to my TV still works fine. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
v2: Bail out if we hit the WARN_ON to avoid fallout later on. Spotted by Chris Wilson. Suggested-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Daniel Vetter authored
Originally I've thought that this fixes up the reset issues on my gm45, but that was just a red herring due to b0rked testing. Still I much prefer writing the right values (all other fields are reserved) instead of potentially dragging gunk around. Hence also clear the register to 0 after a reset. Note that Cspec is a bit confused and doesn't explicitly say that all the other bits in this register are "reserved, mbz" like usually. Instead they're marked as "r/o, default value = 0" which semantically amounts to the same thing. v2: Stop claiming this fixes anything and return 0 if successful instead of stack garbage. v3: Pimp the commit message to explain exactly why I think the docs allow us to ditch the rmw cycle, spurred by a discussion with Chris. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
Sanity check that the memory region found through the Graphics Base of Stolen Memory is reserved and hidden from the rest of the system through the use of the resource API. v2: "Graphics Stolen Memory" is such a more bodacious name than the lame "i915 stolen", and convert to using devres for automagical cleanup of the resource. (danvet) Signed-off-by:
-
- 08 Jul, 2013 8 commits
-
-
Daniel Vetter authored
At least for the common cases where we only need special file operations. The forcewake file is still rather more special. v2: Fix up the debugfs unregister code. v3: Actually squash in the right fixup. Acked-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Daniel Vetter authored
Section 1.5.4, "DPLL A Control Register" from Bspec about bit 23 "FPA0/A1 P2 Clock Divide": 0 = Divide by 2 1 = Divide by 4. This bit must be set in DVO non-gang mode So copy the current limits (which should be good for i8xx) and create a new set for dvo encoders. Reviewed-by:
Chris Wilson <chris@chris-wilson.oc.uk> Signed-off-by:
-
Daniel Vetter authored
I've missed that intel_dvo_mode_set changes the dpll configuration. Hence when I've reworked the sequence to only enable the dpll in the crtc_enable callback in commit 66e3d5c0 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Jun 16 21:24:16 2013 +0200 drm/i915: move i9xx dpll enabling into crtc enable function that special DVO bit was lost. Some BSpec reading confirms that it's only needed for DVO encoders. Section 1.5.4, "DPLL A Control Register" for bit 30: "2X Clock Enable. When driving In non-gang DVO modes such as a connected flat panel or TV, a 2X" version of the clock is needed. When not using the 2X output it should be disabled. This bit cannot be set when driving the integrated LVDS port on devices such as Montara-GM." Fix this regression up. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66516 Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by:
-
Ben Widawsky authored
Embedding the node in the obj is more natural in the transition to VMAs which will also have embedded nodes. This change also helps transition away from put_block to remove node. Though it's quite an uncommon occurrence, it's somewhat convenient to not fail at bind time because we cannot allocate the node. Though in practice there are other allocations (like the request structure) which would probably make this point not terribly useful. Quoting Daniel: Note that the only difference between put_block and remove_node is that the former fills up the preallocation cache. Which we don't need anyway and hence is just wasted space. v2: Clean up the stolen preallocation code. Rebased on the reserve_node patches renames ggtt_ stuff to gtt_ stuff WARN_ON if the object is already bound (which doesn't mean it's in the bound list, tricky) Signed-off-by:
-
Ben Widawsky authored
With the getters in place from the previous patch this members serves no purpose other than saving one spare pointer chase, which will be killed in the next patch anyway. Moving to VMAs, this members adds unnecessary confusion since an object may exist at different offsets in different VMs. v2: Properly preserve the stolen offset. This code is a bit hacky but it all goes away when we embed the drm_mm_node and removes the need for the incorrect patch I submitted previously: "Use gtt_space->start for stolen reservation" Signed-off-by:
-
Ben Widawsky authored
Soon we want to gut a lot of our existing assumptions how many address spaces an object can live in, and in doing so, embed the drm_mm_node in the object (and later the VMA). It's possible in the future we'll want to add more getter/setter methods, but for now this is enough to enable the VMAs. v2: Reworked commit message (Ben) Added comments to the main functions (Ben) sed -i "s/i915_gem_obj_set_color/i915_gem_obj_ggtt_set_color/" drivers/gpu/drm/i915/*.[ch] sed -i "s/i915_gem_obj_bound/i915_gem_obj_ggtt_bound/" drivers/gpu/drm/i915/*.[ch] sed -i "s/i915_gem_obj_size/i915_gem_obj_ggtt_size/" drivers/gpu/drm/i915/*.[ch] sed -i "s/i915_gem_obj_offset/i915_gem_obj_ggtt_offset/" drivers/gpu/drm/i915/*.[ch] (Daniel) v3: Rebased on new reserve_node patch Changed DRM_DEBUG_KMS to actually work (will need fixing later) Signed-off-by:
-
Ben Widawsky authored
With the previous patch we no longer actually create a node, we simply find the correct hole and occupy it. This very well could have been squashed with the last patch, but since I already had David's review, I figured it's easiest to keep it distinct. Also update the users in i915. Conveniently this is the only user of the interface. CC: David Airlie <airlied@linux.ie> CC: <dri-devel@lists.freedesktop.org> Signed-off-by:
David Airlie <airlied@linux.ie> Signed-off-by:
-
Ben Widawsky authored
For an upcoming patch where we introduce the i915 VMA, it's ideal to have the drm_mm_node as part of the VMA struct (ie. it's pre-allocated). Part of the conversion to VMAs is to kill off obj->gtt_space. Doing this will break a bunch of code, but amongst them are 2 callers of drm_mm_create_block(), both related to stolen memory. It also allows us to embed the drm_mm_node into the object currently which provides a nice transition over to the new code. v2: Reordered to do before ripping out obj->gtt_offset. Some minor cleanups made available because of reordering. v3: s/continue/break on failed stolen node allocation (David) Set obj->gtt_space on failed node allocation (David) Only unref stolen (fix double free) on failed create_stolen (David) Free node, and NULL it in failed create_stolen (David) Add back accidentally removed newline (David) CC: <dri-devel@lists.freedesktop.org> Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
- 05 Jul, 2013 4 commits
-
-
Daniel Vetter authored
Just to keep the paranoia equal also sprinkle locking asserts over the pipestat interrupt enable/disable functions. Again this results in false positives in the interrupt setup. Add bogo-locking for these and a big comment explaining why it's there and that it's indeed unnecessary. v2: Fix up the spelling fail Paulo spotted in comments. Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Daniel Vetter authored
A magic -1 is a obscure, especially since it's actually passed as an unsigned, so depends upon the magic sign extension rules in C. This has been added in commit 3727d55e Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Wed May 8 10:45:14 2013 -0700 drm/i915: allow stolen, pre-allocated objects to avoid GTT allocation v2 Use a proper #define instead. Spotted while reviewing Ben's drm_mm_create_block changes. v2: Cast the constant to u32 since otherwise we again have a type mismatch. Suggested by Chris Wilson. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
-
Daniel Vetter authored
We only do this on IBX where there's a fixed pch dpll to pipe assignment. Being explicit about it can't really hurt and makes sparse happy. Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Daniel Vetter authored
This makes sparse happy and also makes it a bit more obvious where we pull off this trick - after all we're only allowed to do it eithe as a default or on platforms where there is no disdinction between the pipe and the cpu transcoder. Reviewed-by:
-
- 02 Jul, 2013 2 commits
-
-
Ville Syrjälä authored
Use wait_for() instead of the open coded loop to avoid spreading the same old timeout related bugs. This changes the loop to use msleep(1) instead of udelay(10) when the Punit had not yet completed the frequency change. In practice that doesn't seem to hurt performance as the Punit appears to be ready pretty much always. Also give the status bit a name, instead of using the magic number 1. Signed-off-by:
-
Jesse Barnes authored
This should help on HSW, where we don't currently have a get_clock call. Reported-by:
Paulo Zanoni <przanoni@gmail.com> Signed-off-by:
-
- 01 Jul, 2013 22 commits
-
-
Jesse Barnes authored
Print out the flag that failed and fix up a mismatched paren. Signed-off-by:
-
Mika Kuoppala authored
As getting error state doesn't anymore require big kmallocs, make error state accessible also from sysfs. v2: - error state clearing (Chris Wilson) - user hint, proper access mode bits and name (Daniel Vetter) v3: release resources in proper order (Chris Wilson) Suggested-by:Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
Mika Kuoppala authored
Make function for struct i915_error_state_buf initialization and export it, for sysfs and debugfs. Signed-off-by:
-
Mika Kuoppala authored
In preparation for sysfs error state access, export ref error state ref counting interface. Signed-off-by:
-
Mika Kuoppala authored
In preparation for accessing error state from sysfs, export error state to string conversion function. Also tuck buffer error handling inside the function. Signed-off-by:
-
Jesse Barnes authored
If the crtc is active, we can simply flip a new fb onto it, provided the other mode setting reqs are met. Otherwise, we'll need to do a full mode set to re-enable the crtc. v2: check for crtc active and set mode_changed accordingly v3: add module parameter, i915.fastboot, to control no fb -> fb flip behavior Signed-off-by:
-
Jesse Barnes authored
Need better pfit tracking to do this right. v2: use fastboot param around this hack Signed-off-by:
-
Jesse Barnes authored
We already fetch and track other state into the main CRTC and encoder structs, and for fastboot we need to do the same with the mode and clock data we read out. v2: fix debug print v3: use fastboot param around state copy v4: set clock and flags for crtc here instead of in setup_hw_state v5: rename function to intel_crtc_mode_from_pipe_config for consistency (Chris) Signed-off-by:
-
Jesse Barnes authored
We need this for comparing modes between configuration changes. The tricky part is to allow us to reuse the new get_clock stuff to recover the lvds clock on gen2/3 when neither the vbt has an lvds mode nor the panel a (useful) EDID. v2: try harder to calulate non-simple pixel clocks (Daniel) call get_clock after getting the encoder config, needed for pixel multiply (Jesse) v3: drop get_clock now that the pixel_multiply has been moved into get_pipe_config v4: re-add get_clock; we need to get the pixel multiplier in the encoder, so need to calculate the clock value after the encoder's get_config is called v5: drop hsw clock_get, still needs to be written v6: add fuzzy clock check (Daniel) v7: wrap fuzzy clock check under !IS_HASWELL use port_clock field rather than a new CPU eDP clock field in crtc_config v8: remove stale pixel_multiplier sets (Daniel) multiply by pixel_multiplier in 9xx clock get too (Daniel) v9: make sure we set pixel_multiplier before calling clock_get from mode_get for LVDS (Daniel) Signed-off-by: -
Jesse Barnes authored
Handling all the state properly for fastboot is still not yet done by far, but we need some way to be able to test what we currently have. So hide the not-yet-quite-complete stuff behind a module option. Signed-off-by:
-
Daniel Vetter authored
Now that we painstakingly track the shared pch dplls we can finally implement pixel mutliplier readout support for pch ports, too. v2: Undo the temporary hack to disable the sdvo pixel multiplier cross-checking. Cc: Imre Deak <imre.deak@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
-
Ben Widawsky authored
for file in `ls drivers/gpu/drm/i915/*.c` ; do sed -i "s/mm.gtt_mtrr/gtt.mtrr/" $file; done Signed-off-by:
-
Ben Widawsky authored
Signed-off-by:
-
Ben Widawsky authored
Just for compactness. Signed-off-by:
-
Ben Widawsky authored
The original pte_encode function needed the dev argument so we could do platform specific handling via IS_GENX, etc. With the merging of a pte encoding function there should never been a need to quirk away gen specific details. The patch doesn't do much but makes the upcoming reworks in gtt/ppgtt/mm slightly (albeit, ever so) easier. Reviewed-by:
Kenneth Graunke <kenneth@whitecape.org> Signed-off-by:
-
Ben Widawsky authored
There isn't any special reason to do this other than it makes it obvious that the two members are connected. Signed-off-by:
-
Ben Widawsky authored
A previous patch had set up the ppgtt and ggtt to use the same scratch page, but still kept around both pointers. Kill it, it's not needed and gets in our way for upcoming cleanups. Signed-off-by:
-
Ben Widawsky authored
Nothing outside of i915_gem_gtt.c and more specifically, the relevant gen specific init function should need to know about number of PDEs, or PTEs per PD. Exposing this will only lead to circumventing using the upcoming VM abstraction. To accomplish this, move the defines into the .c file, rename the PDE define to be GEN6, and make the PTE count less of a magic number. The remaining code in the global gtt setup is a bit messy, but an upcoming patch will clean that one up. v2: Don't hardcode number of PDEs (Daniel + Jesse) Reworded commit message to reflect change. Reviewed-by:
-
Ben Widawsky authored
This helps when we have per VM buffer capturing. Signed-off-by:
-
Ben Widawsky authored
Not only was there an extra, but since we now kzalloc the error state, we don't need either. Signed-off-by:
-
Ville Syrjälä authored
The DPLL lock bit, and the DPIO phy status bits are read-only and controlled by the hardware, so they will never be set by the driver. Mask them out when reading the hw state, so that the state comparison won't fail. Signed-off-by:
Jesse Barnes <jbarnes@virtuosugeek.org> [danvet: Jesse asked for a code comment and I wholeheartly agree, so added one.] Signed-off-by:
-
Daniel Vetter authored
i9xx doesn't use pre_enable at all, so we can fold this in now. Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
