- 22 Aug, 2011 5 commits
-
-
David Woodhouse authored
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Senthil Balasubramanian authored
Due to some recent optimization done in the way the mac address bytes are written into the OTP memory, some AR9485 chipsets were forced to use the first byte from the eeprom template and the remaining bytes are read from OTP. AR9485 happens to use generic eeprom template which has 0x1 as the first byte causes issues in bringing up the card. So fixed the eeprom template accordingly to address the issue. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
When hibernating ->resume may not be called by usb core, but disconnect and probe instead, so we do not increase the counter after decreasing it in ->supend. As a result we free memory early, and get crash when unplugging usb dongle. BUG: unable to handle kernel paging request at 6b6b6b9f IP: [<c06909b0>] driver_sysfs_remove+0x10/0x30 *pdpt = 0000000034f21001 *pde = 0000000000000000 Pid: 20, comm: khubd Not tainted 3.1.0-rc1-wl+ #20 LENOVO 6369CTO/6369CTO EIP: 0060:[<c06909b0>] EFLAGS: 00010202 CPU: 1 EIP is at driver_sysfs_remove+0x10/0x30 EAX: 6b6b6b6b EBX: f52bba34 ECX: 00000000 EDX: 6b6b6b6b ESI: 6b6b6b6b EDI: c0a0ea20 EBP: f61c9e68 ESP: f61c9e64 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process khubd (pid: 20, ti=f61c8000 task=f6138270 task.ti=f61c8000) Call Trace: [<c06909ef>] __device_release_driver+0x1f/0xa0 [<c0690b20>] device_release_driver+0x20/0x40 [<c068fd64>] bus_remove_device+0x84/0xe0 [<c068e12a>] ? device_remove_attrs+0x2a/0x80 [<c068e267>] device_del+0xe7/0x170 [<c06d93d4>] usb_disconnect+0xd4/0x180 [<c06d9d61>] hub_thread+0x691/0x1600 [<c0473260>] ? wake_up_bit+0x30/0x30 [<c0442a39>] ? complete+0x49/0x60 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0 [<c0472eb4>] kthread+0x74/0x80 [<c0472e40>] ? kthread_worker_fn+0x150/0x150 [<c0809b3e>] kernel_thread_helper+0x6/0x10 Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
Do not call ->suspend, ->resume methods after we unregister wiphy. Also delete sta_clanup timer after we finish wiphy unregister to avoid this: WARNING: at lib/debugobjects.c:262 debug_print_object+0x85/0xa0() Hardware name: 6369CTO ODEBUG: free active (active state 0) object type: timer_list hint: sta_info_cleanup+0x0/0x180 [mac80211] Modules linked in: aes_i586 aes_generic fuse bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq mperf ext2 dm_mod uinput thinkpad_acpi hwmon sg arc4 rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac80211 cfg80211 i2c_i801 iTCO_wdt iTCO_vendor_support e1000e ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom yenta_socket ahci libahci pata_acpi ata_generic ata_piix i915 drm_kms_helper drm i2c_algo_bit video [last unloaded: microcode] Pid: 5663, comm: pm-hibernate Not tainted 3.1.0-rc1-wl+ #19 Call Trace: [<c0454cfd>] warn_slowpath_common+0x6d/0xa0 [<c05e05e5>] ? debug_print_object+0x85/0xa0 [<c05e05e5>] ? debug_print_object+0x85/0xa0 [<c0454dae>] warn_slowpath_fmt+0x2e/0x30 [<c05e05e5>] debug_print_object+0x85/0xa0 [<f8a808e0>] ? sta_info_alloc+0x1a0/0x1a0 [mac80211] [<c05e0bd2>] debug_check_no_obj_freed+0xe2/0x180 [<c051175b>] kfree+0x8b/0x150 [<f8a126ae>] cfg80211_dev_free+0x7e/0x90 [cfg80211] [<f8a13afd>] wiphy_dev_release+0xd/0x10 [cfg80211] [<c068d959>] device_release+0x19/0x80 [<c05d06ba>] kobject_release+0x7a/0x1c0 [<c07646a8>] ? rtnl_unlock+0x8/0x10 [<f8a13adb>] ? wiphy_resume+0x6b/0x80 [cfg80211] [<c05d0640>] ? kobject_del+0x30/0x30 [<c05d1a6d>] kref_put+0x2d/0x60 [<c05d056d>] kobject_put+0x1d/0x50 [<c08015f4>] ? mutex_lock+0x14/0x40 [<c068d60f>] put_device+0xf/0x20 [<c069716a>] dpm_resume+0xca/0x160 [<c04912bd>] hibernation_snapshot+0xcd/0x260 [<c04903df>] ? freeze_processes+0x3f/0x90 [<c049151b>] hibernate+0xcb/0x1e0 [<c048fdc0>] ? pm_async_store+0x40/0x40 [<c048fe60>] state_store+0xa0/0xb0 [<c048fdc0>] ? pm_async_store+0x40/0x40 [<c05d0200>] kobj_attr_store+0x20/0x30 [<c0575ea4>] sysfs_write_file+0x94/0xf0 [<c051e26a>] vfs_write+0x9a/0x160 [<c0575e10>] ? sysfs_open_file+0x200/0x200 [<c051e3fd>] sys_write+0x3d/0x70 [<c080959f>] sysenter_do_call+0x12/0x28 Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
-
- 13 Aug, 2011 2 commits
-
-
Emmanuel Grumbach authored
This bug has been introduced by: d5934110 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Mon Jul 11 10:48:51 2011 +0300 iwlagn: simplify the bus architecture Revert part of the buggy patch: dev_get_drvdata will now return iwl_priv as it did before the patch. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Emmanuel Grumbach authored
This reverts commit cc1a93e6. This fix introduced a bug: bad pointer in unload. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 12 Aug, 2011 1 commit
-
-
Julia Lawall authored
In each case, the freed data should be freed in the error handling code as well. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 11 Aug, 2011 23 commits
-
-
Peter Hurley authored
Once the session thread is running, cleanup must be handled by the session thread only. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
When an hidp connection is added for a boot protocol input device, don't release a device reference that was never acquired. The device reference is acquired when the session is linked to the session list (which hasn't happened yet when hidp_setup_input is called). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
When an hidp connection is added for a boot protocol input device, only free the allocated device if device registration fails. Subsequent failures should only unregister the device (the input device api documents that unregister will also free the allocated device). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
Free the cached HID report descriptor on thread terminate. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
Once the session thread is running, cleanup must be handled by the session thread only. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
Commit fada4ac3 introduced the usage of kthread API. kthread_stop is a blocking function which returns only when the thread exits. In this case, the thread can't exit because it's waiting for the write lock, which is being held by cmtp_del_connection() which is waiting for the thread to exit -- deadlock. Revert cmtp_reset_ctr to its original behavior: non-blocking signalling for the session to terminate. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
Commit f4d7cd4a introduced the usage of kthread API. kthread_stop is a blocking function which returns only when the thread exits. In this case, the thread can't exit because it's waiting for the write lock, which is being held by bnep_del_connection() which is waiting for the thread to exit -- deadlock. Use atomic_t/wake_up_process instead to signal to the thread to exit. Signed-off-by: Jaikumar Ganesh <jaikumar@google.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Szymon Janc authored
No command should be send before Command Complete event for HCI reset is received. This fix regression introduced by commit 6bd32326(Bluetooth: Use proper timer for hci command timout) for chips whose reset command takes longer to complete (e.g. CSR) resulting in next command being send before HCI reset completed. Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Chen Ganir authored
L2CAP connection timeout needs to be assigned as miliseconds and not as jiffies. Signed-off-by: Chen Ganir <chen.ganir@ti.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
Fix race condition which can result in missing wakeup during l2cap socket shutdown. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
Fix race condition which can result in missing the wakeup intended to stop the session thread. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
Fix race condition which can result in missing the wakeup intended to stop the session thread. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
Fix race conditions which can cause lost wakeups (or missed signals) while waiting to accept a sco socket connection. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
Fix race conditions which can cause lost wakeups (or misssed signals) while waiting to accept an l2cap socket connection. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
Fix race conditions which can cause lost wakeups while waiting for sock state to change. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
Fix race conditions which can cause lost wakeups (or missed signals) while waiting to accept an rfcomm socket connection. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Peter Hurley authored
Removed superfluous event handling which was used to signal that the rfcomm kthread had been woken. This appears to have been used to prevent lost wakeups. Correctly ordering when the task state is set to TASK_INTERRUPTIBLE is sufficient to prevent lost wakeups. To prevent wakeups which occurred prior to initially setting TASK_INTERRUPTIBLE from being lost, the main work of the thread loop - rfcomm_process_sessions() - is performed prior to sleeping. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Ricardo Mendoza authored
Blacklist Toshiba-branded AR3011 based AR5B195 [0930:0215] and add to ath3k.c for firmware loading. Signed-off-by: Ricardo Mendoza <ricmm@gentoo.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Paul Bolle authored
Disabling the bluetooth usb device embedded in (some) ThinkPads tends to lead to errors like these: btusb_bulk_complete: hci0 urb ffff88011b9bfd68 failed to resubmit (19) btusb_intr_complete: hci0 urb ffff88011b46a318 failed to resubmit (19) btusb_bulk_complete: hci0 urb ffff88011b46a000 failed to resubmit (19) That is because usb_disconnect() doesn't "quiesces" pending urbs. Disconnecting a device is a normal thing to happen so it's no big deal that usb_submit_urb() returns -ENODEV. The simplest way to get rid of these errors is to stop treating that return as an error. Trivial, actually. While we're at it, add comments to be explicit about the reasons we're not complaining about -EPERM and -ENODEV. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Dan Carpenter authored
There was a small typo here so we never actually hit the goto which would call hci_dev_unlock_bh(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Stanislaw Gruszka authored
Patch should fix this oops: BUG: unable to handle kernel NULL pointer dereference at 000000a0 IP: [<f81b30c9>] rt2800usb_get_txwi+0x19/0x70 [rt2800usb] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 Oops: 0000 [#1] SMP Pid: 198, comm: kworker/u:3 Tainted: G W 3.0.0-wl+ #9 LENOVO 6369CTO/6369CTO EIP: 0060:[<f81b30c9>] EFLAGS: 00010283 CPU: 1 EIP is at rt2800usb_get_txwi+0x19/0x70 [rt2800usb] EAX: 00000000 EBX: f465e140 ECX: f4494960 EDX: ef24c5f8 ESI: 810f21f5 EDI: f1da9960 EBP: f4581e80 ESP: f4581e70 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process kworker/u:3 (pid: 198, ti=f4580000 task=f4494960 task.ti=f4580000) Call Trace: [<f804790f>] rt2800_txdone_entry+0x2f/0xf0 [rt2800lib] [<c045110d>] ? warn_slowpath_common+0x7d/0xa0 [<f81b3a38>] ? rt2800usb_work_txdone+0x288/0x360 [rt2800usb] [<f81b3a38>] ? rt2800usb_work_txdone+0x288/0x360 [rt2800usb] [<f81b3a13>] rt2800usb_work_txdone+0x263/0x360 [rt2800usb] [<c046a8d6>] process_one_work+0x186/0x440 [<c046a85a>] ? process_one_work+0x10a/0x440 [<f81b37b0>] ? rt2800usb_probe_hw+0x120/0x120 [rt2800usb] [<c046c283>] worker_thread+0x133/0x310 [<c04885db>] ? trace_hardirqs_on+0xb/0x10 [<c046c150>] ? manage_workers+0x1e0/0x1e0 [<c047054c>] kthread+0x7c/0x90 [<c04704d0>] ? __init_kthread_worker+0x60/0x60 [<c0826b42>] kernel_thread_helper+0x6/0x1 Oops might happen because we check rt2x00queue_empty(queue) twice, but this condition can change and we can process entry in rt2800_txdone_entry(), which was already processed by rt2800usb_txdone_entry_check() -> rt2x00lib_txdone_noinfo() and has nullify entry->skb . Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
In rt2800usb_work_txdone we check flags in order: - ENTRY_OWNER_DEVICE_DATA - ENTRY_DATA_STATUS_PENDING - ENTRY_DATA_IO_FAILED Modify flags in separate order in rt2x00usb_interrupt_txdone, to avoid processing entries in _txdone with wrong flags or skip processing ready entries. Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
Patch should fix this oops: BUG: unable to handle kernel NULL pointer dereference at 000000a0 IP: [<f8e06078>] rt2800usb_write_tx_desc+0x18/0xc0 [rt2800usb] *pdpt = 000000002408c001 *pde = 0000000024079067 *pte = 0000000000000000 Oops: 0000 [#1] SMP EIP: 0060:[<f8e06078>] EFLAGS: 00010282 CPU: 0 EIP is at rt2800usb_write_tx_desc+0x18/0xc0 [rt2800usb] EAX: 00000035 EBX: ef2bef10 ECX: 00000000 EDX: d40958a0 ESI: ef1865f8 EDI: ef1865f8 EBP: d4095878 ESP: d409585c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Call Trace: [<f8da5e85>] rt2x00queue_write_tx_frame+0x155/0x300 [rt2x00lib] [<f8da424c>] rt2x00mac_tx+0x7c/0x370 [rt2x00lib] [<c04882b2>] ? mark_held_locks+0x62/0x90 [<c081f645>] ? _raw_spin_unlock_irqrestore+0x35/0x60 [<c04884ba>] ? trace_hardirqs_on_caller+0x5a/0x170 [<c04885db>] ? trace_hardirqs_on+0xb/0x10 [<f8d618ac>] __ieee80211_tx+0x5c/0x1e0 [mac80211] [<f8d631fc>] ieee80211_tx+0xbc/0xe0 [mac80211] [<f8d63163>] ? ieee80211_tx+0x23/0xe0 [mac80211] [<f8d632e1>] ieee80211_xmit+0xc1/0x200 [mac80211] [<f8d63220>] ? ieee80211_tx+0xe0/0xe0 [mac80211] [<c0487d45>] ? lock_release_holdtime+0x35/0x1b0 [<f8d63986>] ? ieee80211_subif_start_xmit+0x446/0x5f0 [mac80211] [<f8d637dd>] ieee80211_subif_start_xmit+0x29d/0x5f0 [mac80211] [<f8d63924>] ? ieee80211_subif_start_xmit+0x3e4/0x5f0 [mac80211] [<c0760188>] ? sock_setsockopt+0x6a8/0x6f0 [<c0760000>] ? sock_setsockopt+0x520/0x6f0 [<c076daef>] dev_hard_start_xmit+0x2ef/0x650 Oops might happen because we perform parallel putting new entries in a queue (rt2x00queue_write_tx_frame()) and removing entries after finishing transmitting (rt2800usb_work_txdone()). There are cases when _txdone may process an entry that was not fully send and nullify entry->skb . To fix check in _txdone if entry has flags that indicate pending transmission and wait until flags get cleared. Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 10 Aug, 2011 1 commit
-
-
Julia Lawall authored
In each case, the kfree already at the end of the function is also needed in the error case. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 09 Aug, 2011 8 commits
-
-
Bob Copeland authored
This cleans up error handling for the beacon in case of dma mapping failure. We need to free the skb when dma mapping fails instead of nulling and leaking the pointer, and we should bail out to avoid giving the hardware the bad descriptor. Finally, we need to perform the null check after trying to update the beacon, or else beacons will never be sent after a single mapping failure. Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Anthony Bourguignon authored
This patch add a device id for the wifi usb keys shiped by DVICO with some of their tvix hardware. Signed-off-by: Anthony Bourguignon <contact+kernel@toniob.net> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Alex Hacker authored
This patch addresses an issue with incorrect HW register AR_PHY_TX_IQCAL_CORR_COEFF_B1 definition which leads to incorrect clibration. Cc: stable@kernel.org Signed-off-by: Alex Hacker <hacker@epn.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ivo van Doorn authored
Reported-by: Maik-Holger Freudenberg <hhfeuer@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
This patch fixes several problems in the USB_DEVICE table, including missing IDs, reversed vendor/product codes, and a duplicate ID. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
The commit ebefce3d failed to set proper PMU value to address ripple issue for AR9485. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
CTL power data incorrect in ctlPowerData_2G field of ar9300_eeprom. Setting incorrect CTL power in calibration is causing lower tx power. Tx power was reported as 3dBm while operating in channel 6 HT40+/ in channel 11 HT40- due to CTL powers in the calibration is set to zero. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This causes an databus error on a Broadcom SoC using bcma. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-