- 02 Aug, 2010 40 commits
-
-
Daniel Mack authored
Propagte correct error values instead of returning -1 which just means -EPERM ("Permission denied") Signed-off-by:Daniel Mack <daniel@caiaq.de> Signed-off-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Julia Lawall authored
Add a mutex_unlock missing on the error path. In the other functions in the same file the locks and unlocks of this mutex appear to be balanced, so it would seem that the same should hold in this case. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1; @@ * mutex_lock(E1,...); <+... when != E1 if (...) { ... when != E1 * return ...; } ...+> * mutex_unlock(E1,...); // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Randy Dunlap authored
My previous patch to depend on FONTS was not sufficient since FONTS is boolean. VIDEO_VIVI needs to depend on a tristate so that it won't be enabled as =y when framebuffer is built as modular, so modify it to depend on the same symbols that FONTS depends on, which are FRAMEBUFFER_CONSOLE || STI_CONSOLE. Fixes this build error when VIDEO_VIVI=y and FRAMEBUFFER_CONSOLE=m: vivi.c:(.init.text+0x7205): undefined reference to `find_font' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Jarod Wilson authored
mchehab: merged with IR/mceusb: userspace buffer copy moved out of driver Userspace buffer copy moved out of driver and into lirc bridge driver [mchehab@redhat.com: merged the patch to avoid compilation errors with allyesconfig ] Signed-off-by:Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
I have pinnacle hardware now. None of this pinnacle-specific crap is at all necessary (in fact, some of it needed to be removed to actually make it work). The only thing unique about this device is that it often transfers inbound data w/a header of 0x90, meaning 16 bytes of IR data following it, so I had to make adjustments for that, and now its working perfectly fine. Signed-off-by:
-
Jarod Wilson authored
The first-gen mceusb device init code, while mostly functional, had a few issues in it. This patch does the following: 1) removes use of magic numbers 2) eliminates mapping of memory from stack 3) makes debug spew translator functional Additionally, this clean-up revealed that we cannot read the proper default tx blaster bitmask from the device, we do actually have to initialize it ourselves, which requires use of a somewhat gross list-based mask inversion check. This patch also removes the entirely unnecessary use of struct ir_input_state. Also supersedes two earlier patches that also touched on first-gen cleanup, but were partially botched. This one actually compiles, works, etc., I swear. ;) Signed-off-by:
-
Jarod Wilson authored
Was using input_unregister_device directly, instead of using ir_input_unregister, which tears down a bunch of other things in addition to eventually calling input_unregister_device. Signed-off-by:
-
Jarod Wilson authored
Was using input_unregister_device directly, instead of using ir_input_unregister, which tears down a bunch of other things in addition to eventually calling input_unregister_device. Signed-off-by:
-
Randy Dunlap authored
Fix ir-nec-decoder build: it uses bitrev library code, so select BITREVERSE in its Kconfig. ir-nec-decoder.c:(.text+0x1a2517): undefined reference to `byte_rev_table' ir-nec-decoder.c:(.text+0x1a2526): undefined reference to `byte_rev_table' ir-nec-decoder.c:(.text+0x1a2530): undefined reference to `byte_rev_table' ir-nec-decoder.c:(.text+0x1a2539): undefined reference to `byte_rev_table' Signed-off-by:
-
David Härdeman authored
This patch moves the state from each raw decoder into the ir_raw_event_ctrl struct. This allows the removal of code like this: spin_lock(&decoder_lock); list_for_each_entry(data, &decoder_list, list) { if (data->ir_dev == ir_dev) break; } spin_unlock(&decoder_lock); return data; which is currently run for each decoder on each event in order to get the client-specific decoding state data. In addition, ir decoding modules and ir driver module load order is now independent. Centralizing the data also allows for a nice code reduction of about 30% per raw decoder as client lists and client registration callbacks are no longer necessary (but still kept around for the benefit of the lirc decoder). Out-of-tree modules can still use a similar trick to what the raw decoders did before this patch until they are merged. Signed-off-by:David Härdeman <david@hardeman.nu> Acked-by:
-
Mauro Carvalho Chehab authored
With this change, it is now possible to do something like: su -c 'echo "none +rc-5 +nec" > /sys/class/rc/rc1/protocols' This prevents the need of multiple opens, one for each protocol change, and makes userspace application easier. Signed-off-by: -
Mauro Carvalho Chehab authored
Writing "none" to /dev/class/rc/rc*/protocols will disable all protocols. This allows an easier setup, from userspace, as userspace applications don't need to disable protocol per protocol, before enabling a different set of protocols. Signed-off-by: -
Mauro Carvalho Chehab authored
While rc-5 and rc-6 protocols are generally abreviated as "rc5" and "rc6", previous sysfs nodes uses rc-5 and rc-6 for the Philips protocols. This is consistent with the protocol nomenclature given by the original Philips spec: "Remote control system RC-5" (doc. Nr. 9398 706 23011). Also, rc5 is the name of a widely known cryptography protocol. So, the better is to keep referring to those protocols as "rc-5" and "rc-6". Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of using "magic" sizes for protocol names, replace them by an array, and use strlen(). No functional changes. Signed-off-by: -
David Härdeman authored
With the current logic, each raw decoder needs to add a copy of the exact same sysfs code. This is both unnecessary and also means that (re)loading an IR driver after raw decoder modules have been loaded won't work as expected. This patch moves that logic into ir-raw-event and adds a single sysfs file per device. Reading that file returns something like: "rc5 [rc6] nec jvc [sony]" (with enabled protocols in [] brackets) Writing either "+protocol" or "-protocol" to that file will enable or disable the according protocol decoder. An additional benefit is that the disabling of a decoder will be remembered across module removal/insertion so a previously disabled decoder won't suddenly be activated again. The default setting is to enable all decoders. This is also necessary for the next patch which moves even more decoder state into the central raw decoding structs. Signed-off-by:
-
David Härdeman authored
Partially convert drivers/media/video/ir-kbd-i2c.c to not use ir-functions.c Signed-off-by:
-
David Härdeman authored
Partially convert drivers/media/video/cx88/cx88-input.c to not use ir-functions.c Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of generating one printk for every IR read, prints it only when count is different from the last count. While here, as this code is called on every 100ms during the runtime lifetime, do some performance optimization, assuming that, under normal circumstances, it is unlikely that the driver would get a new key/key repeat on every poll. Signed-off-by: -
David Härdeman authored
Convert drivers/media/video/em28xx/em28xx-input.c to not use ir-functions.c Signed-off-by:
-
David Härdeman authored
Convert drivers/media/dvb/mantis/mantis_input.c to not use ir-functions.c Signed-off-by:
-
Abylay Ospan authored
Signed-off-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Márton Németh authored
Add Genius iSlim 310 webcam to the supported list of the PAC7302 driver. For more information see http://linuxtv.org/wiki/index.php/PixArt_PAC7301/PAC7302 . Signed-off-by:
Márton Németh <nm127@freemail.hu> Signed-off-by:
-
Olivier Lorin authored
- Extra spaces to align some variable names and a defined value Signed-off-by:
Olivier Lorin <o.lorin@laposte.net> Signed-off-by:
-
Olivier Lorin authored
Signed-off-by:
-
Olivier Lorin authored
- Change of rounded image resolutions to the real ones for MI2020 sensor in order to discard 2 random lines in the bottom of images Signed-off-by:
-
Olivier Lorin authored
- Setting changes applied after an end of image marker reception This is the way MI2020 sensor works. It seems to be logical to wait for a complete image before to change a setting. Signed-off-by:
-
Olivier Lorin authored
- 1 ms "msleep" applied to each sensor after USB control data exchange This was done for two sensors because these exchanges were known to be too quick depending on laptop model. It is fairly logical to apply this delay to each sensor in order to prevent from having errors with untested hardwares. Signed-off-by:
-
Olivier Lorin authored
- new MI2020 driver version made from a webcam gift - all previous flavors of this driver removed Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Devin Heitmueller authored
This patch address an arithmetic error for the case where the only remaining content in the USB packet was the "225Axxxx" start of active video. In cases where that happened to be at the end of the frame, we would inject it into the videobuf (which is incorrect). This caused fields to be intermittently rendered off by two pixels. Thanks to Eugeniy Meshcheryakov for bringing this issue to my attention Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Devin Heitmueller authored
Add NTSC closed captioning support for au0828 based products. Note that this also required reworking the locking to support streaming on both the video and VBI devices (the logic for which I copied from my changes made to the em28xx several months ago). This work was sponsored by GetWellNetwork Inc. Signed-off-by:
-
Michael Krufky authored
Fix error detection of failures during initialization of first instance: Dont pass a function into the tda_fail macro. Instead, save the function return value and pass that into the tda_fail macro. This prevents the function from being called twice in cases of failure, for example: [19026.074070] tuner 4-0060: chip found @ 0xc0 (device #0) [19026.087755] tda18271 4-0060: creating new instance [19026.089965] Unknown device detected @ 4-0060, device not supported. [19026.092233] Unknown device detected @ 4-0060, device not supported. [19026.092241] tda18271_attach: [4-0060|M] error -22 on line 1275 [19026.092327] tda18271 4-0060: destroying instance Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Signed-off-by:
-
Andy Walls authored
Signed-off-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
