Skip to content

L
linux
Switch branch/tag
  1. 27 Jan, 2013 2 commits
  3. 26 Jan, 2013 3 commits
  5. 23 Jan, 2013 4 commits
    • Timo Teräs's avatar
      r8169: remove the obsolete and incorrect AMD workaround · 5d0feaff
      Timo Teräs authored 
      This was introduced in commit 6dccd16b "r8169: merge with version
6.001.00 of Realtek's r8169 driver". I did not find the version
6.001.00 online, but in 6.002.00 or any later r8169 from Realtek
this hunk is no longer present.

Also commit 05af2142 "r8169: fix Ethernet Hangup for RTL8110SC
rev d" claims to have fixed this issue otherwise.

The magic compare mask of 0xfffe000 is dubious as it masks
parts of the Reserved part, and parts of the VLAN tag. But this
does not make much sense as the VLAN tag parts are perfectly
valid there. In matter of fact this seems to be triggered with
any VLAN tagged packet as RxVlanTag bit is matched. I would
suspect 0xfffe0000 was intended to test reserved part only.

Finally, this hunk is evil as it can cause more packets to be
handled than what was NAPI quota causing net/core/dev.c:
net_rx_action(): WARN_ON_ONCE(work > weight) to trigger, and
mess up the NAPI state causing device to hang.

As result, any system using VLANs and having high receive
traffic (so that NAPI poll budget limits rtl_rx) would result
in device hang.
Signed-off-by: default avatarTimo Teräs <timo.teras@iki.fi>
Acked-by: default avatarFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5d0feaff
    • Jason Wang's avatar
      tuntap: limit the number of flow caches · b8732fb7
      Jason Wang authored 
      We create new flow caches when a new flow is identified by tuntap, This may lead
some issues:

- userspace may produce a huge amount of short live flows to exhaust host memory
- the unlimited number of flow caches may produce a long list which increase the
  time in the linear searching

Solve this by introducing a limit of total number of flow caches.

Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: default avatarJason Wang <jasowang@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b8732fb7
    • Jason Wang's avatar
      tuntap: reduce memory using of queues · edfb6a14
      Jason Wang authored 
      A MAX_TAP_QUEUES(1024) queues of tuntap device is always allocated
unconditionally even userspace only requires a single queue device. This is
unnecessary and will lead a very high order of page allocation when has a high
possibility to fail. Solving this by creating a one queue net device when
userspace only use one queue and also reduce MAX_TAP_QUEUES to
DEFAULT_MAX_NUM_RSS_QUEUES which can guarantee the success of
the allocation.
Reported-by: default avatarDirk Hohndel <dirk@hohndel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: default avatarJason Wang <jasowang@redhat.com>
Acked-by: default avatarMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      edfb6a14
    • Bjørn Mork's avatar
      net: cdc_mbim: send ZLP only for the specific buggy device · 844e88f0
      Bjørn Mork authored 
      Reverting 328d7b8a and instead adding an exception for the
Sierra Wireless MC7710.

commit 328d7b8a (net: cdc_mbim: send ZLP after max sized NTBs)
added a workaround for an issue observed on one specific device.
Concerns were raised that this workaround adds a performance
penalty to all devices based on questionable, if not buggy,
behaviour of a single device:

 "If you add ZLP for NTBs of dwNtbOutMaxSize, you are heavily affecting CPU
  load, increasing interrupt load by factor of 2 in high load traffic
  scenario and possibly decreasing throughput for all other devices
  which behaves correctly."

 "The idea of NCM was to avoid extra ZLPs. If your transfer is exactly
  dwNtbOutMaxSize, it's known, you can submit such request on the receiver
  side and you do not need any EOT indicatation, so the frametime can be
  used for useful data."

Adding a device specific exception to prevent the workaround from
affecting well behaved devices.

The assumption here is that needing a ZLP is truly an *exception*.
We do not yet have enough data to verify this.  The generic
workaround in commit 328d7b8a should be considered acceptable despite
the performance penalty if the exception list becomes a maintainance
hassle.

Cc: Alexey ORISHKO <alexey.orishko@stericsson.com>
Cc: Yauheni Kaliuta <y.kaliuta@gmail.com>
Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      844e88f0
  7. 22 Jan, 2013 4 commits
    • Steffen Klassert's avatar
      ipv4: Fix route refcount on pmtu discovery · b44108db
      Steffen Klassert authored 
      git commit 9cb3a50c (ipv4: Invalidate the socket cached route on
pmtu events if possible) introduced a refcount problem. We don't
get a refcount on the route if we get it from__sk_dst_get(), but
we need one if we want to reuse this route because __sk_dst_set()
releases the refcount of the old route. This patch adds proper
refcount handling for that case. We introduce a 'new' flag to
indicate that we are going to use a new route and we release the
old route only if we replace it by a new one.
Reported-by: default avatarJulian Anastasov <ja@ssi.bg>
Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b44108db
    • David S. Miller's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec · 0c8729c9
      David S. Miller authored 
      Steffen Klassert says:

====================
1) The transport header did not point to the right place after
   esp/ah processing on tunnel mode in the receive path. As a
   result, the ECN field of the inner header was not set correctly,
   fixes from Li RongQing.

2) We did a null check too late in one of the xfrm_replay advance
   functions. This can lead to a division by zero, fix from
   Nickolai Zeldovich.

3) The size calculation of the hash table missed the muiltplication
   with the actual struct size when the hash table is freed.
   We might call the wrong free function, fix from Michal Kubecek.

4) On IPsec pmtu events we can't access the transport headers of
   the original packet, so force a relookup for all routes
   to notify about the pmtu event.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0c8729c9
    • Daniel Wagner's avatar
      net: net_cls: fd passed in SCM_RIGHTS datagram not set correctly · d8429506
      Daniel Wagner authored 
      Commit 6a328d8c changed the update
logic for the socket but it does not update the SCM_RIGHTS update
as well. This patch is based on the net_prio fix commit

48a87cc2

    net: netprio: fd passed in SCM_RIGHTS datagram not set correctly

    A socket fd passed in a SCM_RIGHTS datagram was not getting
    updated with the new tasks cgrp prioidx. This leaves IO on
    the socket tagged with the old tasks priority.

    To fix this add a check in the scm recvmsg path to update the
    sock cgrp prioidx with the new tasks value.

Let's apply the same fix for net_cls.
Signed-off-by: default avatarDaniel Wagner <daniel.wagner@bmw-carit.de>
Reported-by: default avatarLi Zefan <lizefan@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: netdev@vger.kernel.org
Cc: cgroups@vger.kernel.org
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d8429506
    • Eric Dumazet's avatar
      netxen: fix off by one bug in netxen_release_tx_buffer() · a05948f2
      Eric Dumazet authored 
      Christoph Paasch found netxen could trigger a BUG in its dismantle
phase, in netxen_release_tx_buffer(), using full size TSO packets.

cmd_buf->frag_count includes the skb->data part, so the loop must
start at index 1 instead of 0, or else we can make an out
of bound access to cmd_buff->frag_array[MAX_SKB_FRAGS + 2]

Christoph provided the fixes in netxen_map_tx_skb() function.
In case of a dma mapping error, its better to clear the dma fields
so that we don't try to unmap them again in netxen_release_tx_buffer()
Reported-by: default avatarChristoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Tested-by: default avatarChristoph Paasch <christoph.paasch@uclouvain.be>
Cc: Sony Chacko <sony.chacko@qlogic.com>
Cc: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: default avatarChristoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a05948f2
  9. 21 Jan, 2013 13 commits
  11. 20 Jan, 2013 1 commit
  13. 19 Jan, 2013 2 commits
  15. 18 Jan, 2013 5 commits
  17. 17 Jan, 2013 6 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7