1. 03 Jan, 2015 3 commits
  2. 02 Jan, 2015 21 commits
  3. 01 Jan, 2015 7 commits
  4. 31 Dec, 2014 9 commits
    • David S. Miller's avatar
    • David S. Miller's avatar
    • David S. Miller's avatar
      Merge branch 'fib_trie-next' · e495f78d
      David S. Miller authored
      Alexander Duyck says:
      
      ====================
      fib_trie: Reduce time spent in fib_table_lookup by 35 to 75%
      
      These patches are meant to address several performance issues I have seen
      in the fib_trie implementation, and fib_table_lookup specifically.  With
      these changes in place I have seen a reduction of up to 35 to 75% for the
      total time spent in fib_table_lookup depending on the type of search being
      performed.
      
      On a VM running in my Corei7-4930K system with a trie of maximum depth of 7
      this resulted in a reduction of over 370ns per packet in the total time to
      process packets received from an ixgbe interface and route them to a dummy
      interface.  This represents a failed lookup in the local trie followed by
      a successful search in the main trie.
      
      				Baseline	Refactor
        ixgbe->dummy routing		1.20Mpps	2.21Mpps
        ------------------------------------------------------------
        processing time per packet		835ns		453ns
        fib_table_lookup		50.1%	418ns	25.0%	113ns
        check_leaf.isra.9		 7.9%	 66ns	   --	 --
        ixgbe_clean_rx_irq		 5.3%	 44ns	 9.8%	 44ns
        ip_route_input_noref		 2.9%	 25ns	 4.6%	 21ns
        pvclock_clocksource_read	 2.6%	 21ns	 4.6%	 21ns
        ip_rcv			 2.6%	 22ns	 4.0%	 18ns
      
      In the simple case of receiving a frame and dropping it before it can reach
      the socket layer I saw a reduction of 40ns per packet.  This represents a
      trip through the local trie with the correct leaf found with no need for
      any backtracing.
      
      				Baseline	Refactor
        ixgbe->local receive		2.65Mpps	2.96Mpps
        ------------------------------------------------------------
        processing time per packet		377ns		337ns
        fib_table_lookup		25.1%	 95ns	25.8%	 87ns
        ixgbe_clean_rx_irq		 8.7%	 33ns	 9.0%	 30ns
        check_leaf.isra.9		 7.2%	 27ns	   --	 --
        ip_rcv			 5.7%	 21ns	 6.5%	 22ns
      
      These changes have resulted in several functions being inlined such as
      check_leaf and fib_find_node, but due to the code simplification the
      overall size of the code has been reduced.
      
         text	   data	    bss	    dec	    hex	filename
        16932	    376	     16	  17324	   43ac	net/ipv4/fib_trie.o - before
        15259	    376	      8	  15643	   3d1b	net/ipv4/fib_trie.o - after
      
      Changes since RFC:
        Replaced this_cpu_ptr with correct call to this_cpu_inc in patch 1
        Changed test for leaf_info mismatch to (key ^ n->key) & li->mask_plen in patch 10
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e495f78d
    • Alexander Duyck's avatar
      fib_trie: Add tracking value for suffix length · 5405afd1
      Alexander Duyck authored
      This change adds a tracking value for the maximum suffix length of all
      prefixes stored in any given tnode.  With this value we can determine if we
      need to backtrace or not based on if the suffix is greater than the pos
      value.
      
      By doing this we can reduce the CPU overhead for lookups in the local table
      as many of the prefixes there are 32b long and have a suffix length of 0
      meaning we can immediately backtrace to the root node without needing to
      test any of the nodes between it and where we ended up.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5405afd1
    • Alexander Duyck's avatar
      fib_trie: Remove checks for index >= tnode_child_length from tnode_get_child · 21d1f11d
      Alexander Duyck authored
      For some reason the compiler doesn't seem to understand that when we are in
      a loop that runs from tnode_child_length - 1 to 0 we don't expect the value
      of tn->bits to change.  As such every call to tnode_get_child was rerunning
      tnode_chile_length which ended up consuming quite a bit of space in the
      resultant assembly code.
      
      I have gone though and verified that in all cases where tnode_get_child
      is used we are either winding though a fixed loop from tnode_child_length -
      1 to 0, or are in a fastpath case where we are verifying the value by
      either checking for any remaining bits after shifting index by bits and
      testing for leaf, or by using tnode_child_length.
      
      size net/ipv4/fib_trie.o
      Before:
         text	   data	    bss	    dec	    hex	filename
        15506	    376	      8	  15890	   3e12	net/ipv4/fib_trie.o
      
      After:
         text	   data	    bss	    dec	    hex	filename
        14827	    376	      8	  15211	   3b6b	net/ipv4/fib_trie.o
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      21d1f11d
    • Alexander Duyck's avatar
      fib_trie: inflate/halve nodes in a more RCU friendly way · 12c081a5
      Alexander Duyck authored
      This change pulls the node_set_parent functionality out of put_child_reorg
      and instead leaves that to the function to take care of as well.  By doing
      this we can fully construct the new cluster of tnodes and all of the
      pointers out of it before we start routing pointers into it.
      
      I am suspecting this will likely fix some concurency issues though I don't
      have a good test to show as such.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      12c081a5
    • Alexander Duyck's avatar
      fib_trie: Push tnode flushing down to inflate/halve · fc86a93b
      Alexander Duyck authored
      This change pushes the tnode freeing down into the inflate and halve
      functions.  It makes more sense here as we have a better grasp of what is
      going on and when a given cluster of nodes is ready to be freed.
      
      I believe this may address a bug in the freeing logic as well.  For some
      reason if the freelist got to a certain size we would call
      synchronize_rcu().  I'm assuming that what they meant to do is call
      synchronize_rcu() after they had handed off that much memory via
      call_rcu().  As such that is what I have updated the behavior to be.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fc86a93b
    • Alexander Duyck's avatar
      fib_trie: Push assignment of child to parent down into inflate/halve · ff181ed8
      Alexander Duyck authored
      This change makes it so that the assignment of the tnode to the parent is
      handled directly within whatever function is currently handling the node be
      it inflate, halve, or resize.  By doing this we can avoid some of the need
      to set NULL pointers in the tree while we are resizing the subnodes.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ff181ed8
    • Alexander Duyck's avatar
      fib_trie: Add functions should_inflate and should_halve · f05a4819
      Alexander Duyck authored
      This change pulls the logic for if we should inflate/halve the nodes out
      into separate functions.  It also addresses what I believe is a bug where 1
      full node is all that is needed to keep a node from ever being halved.
      
      Simple script to reproduce the issue:
      	modprobe dummy;	ifconfig dummy0 up
      	for i in `seq 0 255`; do ifconfig dummy0:$i 10.0.${i}.1/24 up; done
      	ifconfig dummy0:256 10.0.255.33/16 up
      	for i in `seq 0 254`; do ifconfig dummy0:$i down; done
      
      Results from /proc/net/fib_triestat
      Before:
      	Local:
      		Aver depth:     3.00
      		Max depth:      4
      		Leaves:         17
      		Prefixes:       18
      		Internal nodes: 11
      		  1: 8  2: 2  10: 1
      		Pointers: 1048
      	Null ptrs: 1021
      	Total size: 11  kB
      After:
      	Local:
      		Aver depth:     3.41
      		Max depth:      5
      		Leaves:         17
      		Prefixes:       18
      		Internal nodes: 12
      		  1: 8  2: 3  3: 1
      		Pointers: 36
      	Null ptrs: 8
      	Total size: 3  kB
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f05a4819