Skip to content

L
linux
Switch branch/tag
  1. 09 Aug, 2013 7 commits
  3. 07 Aug, 2013 2 commits
    • Linus Torvalds's avatar
      Merge tag 'trace-fixes-3.11-rc3' of... · b7bc9e7d
      Linus Torvalds authored 
      Merge tag 'trace-fixes-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Oleg Nesterov has been working hard in closing all the holes that can
  lead to race conditions between deleting an event and accessing an
  event debugfs file.  This included a fix to the debugfs system (acked
  by Greg Kroah-Hartman).  We think that all the holes have been patched
  and hopefully we don't find more.  I haven't marked all of them for
  stable because I need to examine them more to figure out how far back
  some of the changes need to go.

  Along the way, some other fixes have been made.  Alexander Z Lam fixed
  some logic where the wrong buffer was being modifed.

  Andrew Vagin found a possible corruption for machines that actually
  allocate cpumask, as a reference to one was being zeroed out by
  mistake.

  Dhaval Giani found a bad prototype when tracing is not configured.

  And I not only had some changes to help Oleg, but also finally fixed a
  long standing bug that Dave Jones and others have been hitting, where
  a module unload and reload can cause the function tracing accounting
  to get screwed up"

* tag 'trace-fixes-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix reset of time stamps during trace_clock changes
  tracing: Make TRACE_ITER_STOP_ON_FREE stop the correct buffer
  tracing: Fix trace_dump_stack() proto when CONFIG_TRACING is not set
  tracing: Fix fields of struct trace_iterator that are zeroed by mistake
  tracing/uprobes: Fail to unregister if probe event files are in use
  tracing/kprobes: Fail to unregister if probe event files are in use
  tracing: Add comment to describe special break case in probe_remove_event_call()
  tracing: trace_remove_event_call() should fail if call/file is in use
  debugfs: debugfs_remove_recursive() must not rely on list_empty(d_subdirs)
  ftrace: Check module functions being traced on reload
  ftrace: Consolidate some duplicate code for updating ftrace ops
  tracing: Change remove_event_file_dir() to clear "d_subdirs"->i_private
  tracing: Introduce remove_event_file_dir()
  tracing: Change f_start() to take event_mutex and verify i_private != NULL
  tracing: Change event_filter_read/write to verify i_private != NULL
  tracing: Change event_enable/disable_read() to verify i_private != NULL
  tracing: Turn event/id->i_private into call->event.type
      b7bc9e7d
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 8ef9c292
      Linus Torvalds authored 
      Pull vfs fixes from Al Viro.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: add missing check for __O_TMPFILE in fcntl_init()
  fs: Allow unprivileged linkat(..., AT_EMPTY_PATH) aka flink
  fs: Fix file mode for O_TMPFILE
  reiserfs: fix deadlock in umount
      8ef9c292
  5. 06 Aug, 2013 9 commits
  7. 05 Aug, 2013 7 commits
    • Zheng Liu's avatar
      vfs: add missing check for __O_TMPFILE in fcntl_init() · 3d62c45b
      Zheng Liu authored 
      As comment in include/uapi/asm-generic/fcntl.h described, when
introducing new O_* bits, we need to check its uniqueness in
fcntl_init().  But __O_TMPFILE bit is missing.  So fix it.
Signed-off-by: default avatarZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      3d62c45b
    • Andy Lutomirski's avatar
      fs: Allow unprivileged linkat(..., AT_EMPTY_PATH) aka flink · bb2314b4
      Andy Lutomirski authored 
      Every now and then someone proposes a new flink syscall, and this spawns
a long discussion of whether it would be a security problem.  I think
that this is missing the point: flink is *already* allowed without
privilege as long as /proc is mounted -- it's called AT_SYMLINK_FOLLOW.

Now that O_TMPFILE is here, the ability to create a file with O_TMPFILE,
write it, and link it in is very convenient.  The only problem is that
it requires that /proc be mounted so that you can do:

linkat(AT_FDCWD, "/proc/self/fd/<tmpfd>", dfd, path, AT_SYMLINK_NOFOLLOW)

This sucks -- it's much nicer to do:

linkat(tmpfd, "", dfd, path, AT_EMPTY_PATH)

Let's allow it.

If this turns out to be excessively scary, it we could instead require
that the inode in question be I_LINKABLE, but this seems pointless given
the /proc situation
Signed-off-by: default avatarAndy Lutomirski <luto@amacapital.net>
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      bb2314b4
    • Andy Lutomirski's avatar
      fs: Fix file mode for O_TMPFILE · e305f48b
      Andy Lutomirski authored 
      O_TMPFILE, like O_CREAT, should respect the requested mode and should
create regular files.

This fixes two bugs: O_TMPFILE required privilege (because the mode
ended up as 000) and it produced bogus inodes with no type.
Signed-off-by: default avatarAndy Lutomirski <luto@amacapital.net>
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      e305f48b
    • Al Viro's avatar
      reiserfs: fix deadlock in umount · 672fe15d
      Al Viro authored 
      Since remove_proc_entry() started to wait for IO in progress (i.e.
since 2007 or so), the locking in fs/reiserfs/proc.c became wrong;
if procfs read happens between the moment when umount() locks the
victim superblock and removal of /proc/fs/reiserfs/<device>/*,
we'll get a deadlock - read will wait for s_umount (in sget(),
called by r_start()), while umount will wait in remove_proc_entry()
for that read to finish, holding s_umount all along.

Fortunately, the same change allows a much simpler race avoidance -
all we need to do is remove the procfs entries in the very beginning
of reiserfs ->kill_sb(); that'll guarantee that pointer to superblock
will remain valid for the duration for procfs IO, so we don't need
sget() to keep the sucker alive.  As the matter of fact, we can
get rid of the home-grown iterator completely, and use single_open()
instead.
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      672fe15d
    • Florian Fainelli's avatar
      MIPS: BMIPS: fix hardware interrupt routing for boot CPU != 0 · fcfa66de
      Florian Fainelli authored 
      The hardware interrupt routing for boot CPU != 0 is wrong because it
will route all the hardware interrupts to TP0 which is not the one we
booted from. Fix this by properly checking which boot CPU we are booting
from and updating the right interrupt mask for the boot CPU. This fixes
booting on BCM3368 with bmips_smp_emabled = 0.
Signed-off-by: default avatarFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/5650/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      fcfa66de
    • Ralf Baechle's avatar
      MIPS: oprofile: Fix BUG due to smp_processor_id() in preemptible code. · cf5b2d23
      Ralf Baechle authored 
      current_cpu_type() is not preemption-safe.
If CONFIG_PREEMPT is enabled then mipsxx_reg_setup() can be called from preemptible state.
Added get_cpu()/put_cpu() pair to make it preemption-safe.

This was found while testing oprofile with CONFIG_DEBUG_PREEMPT enable.

/usr/zntestsuite # opcontrol --init
/usr/zntestsuite # opcontrol --setup --event=L2_CACHE_ACCESSES:500 --event=L2_CACHE_MISSES:500 --no-vmlinux
/usr/zntestsuite # opcontrol --start
Using 2.6+ OProfile kernel interface.
BUG: using smp_processor_id() in preemptible [00000000] code: oprofiled/1362
caller is mipsxx_reg_setup+0x11c/0x164
CPU: 0 PID: 1362 Comm: oprofiled Not tainted 3.10.4 #18
Stack : 00000006 70757465 00000000 00000000 00000000 00000000 80b173f6 00000037
          80b10000 00000000 80b21614 88f5a220 00000000 00000000 00000000 00000000
          00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
          00000000 00000000 00000000 89c49c00 89c49c2c 80721254 807b7927 8012c1d0
          80b10000 80721254 00000000 00000552 88f5a220 80b1335c 807b78e6 89c49ba8
          ...
Call Trace:
[<801099a4>] show_stack+0x64/0x7c
[<80665520>] dump_stack+0x20/0x2c
[<803a2250>] debug_smp_processor_id+0xe0/0xf0
[<8052df24>] mipsxx_reg_setup+0x11c/0x164
[<8052cd70>] op_mips_setup+0x24/0x4c
[<80529cfc>] oprofile_setup+0x5c/0x12c
[<8052b9f8>] event_buffer_open+0x78/0xf8
[<801c3150>] do_dentry_open.isra.15+0x2b8/0x3b0
[<801c3270>] finish_open+0x28/0x4c
[<801d49b8>] do_last.isra.41+0x2cc/0xd00
[<801d54a0>] path_openat+0xb4/0x4c4
[<801d5c44>] do_filp_open+0x3c/0xac
[<801c4744>] do_sys_open+0x110/0x1f4
[<8010f47c>] stack_done+0x20/0x44

Bug reported and original patch by Jerin Jacob <jerinjacobk@gmail.com>.
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
Acked-by: default avatarJerin Jacob <jerinjacobk@gmail.com>
      cf5b2d23
    • Markos Chandras's avatar
      MIPS: PNX833x: PNX8335_PCI_ETHERNET_INT depends on CONFIG_SOC_PNX8335 · 3ac3bcb9
      Markos Chandras authored 
      The PNX8335_PCI_ETHERNET_INT macro is defined in
arch/mips/include/asm/mach-pnx833x/irq-mapping.h
only if CONFIG_SOC_PNX8335 is selected.

Fixes the following randconfig problem:
arch/mips/pnx833x/common/platform.c:210:12:
error: 'PNX8335_PIC_ETHERNET_INT' undeclared here
(not in a function)
Signed-off-by: default avatarMarkos Chandras <markos.chandras@imgtec.com>
Acked-by: default avatarSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5585/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      3ac3bcb9
  9. 04 Aug, 2013 6 commits
  11. 03 Aug, 2013 9 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7