- 17 Apr, 2010 1 commit
-
-
Mark Brown authored
-
- 15 Apr, 2010 2 commits
-
-
Sascha Hauer authored
Doing so causes a deadlock, so just signal the timer to stop using an atomic variable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Sascha Hauer authored
Currently the notification of elapsed periods is not very exact. Increase minimum periods to 4 as suggested by Liam Girdwood. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 12 Apr, 2010 2 commits
-
-
Marek Vasut authored
This patch adds support for sound through the WM8750 codec on Zipit Z2. Also, this patch incorporates support for detecting headset jack insertion through the jack detection API. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Bill Gatliff authored
Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 Apr, 2010 1 commit
-
-
Marek Vasut authored
Register the WM8750 as a SPI or I2C device. This patch mostly shuffles code around. Hugely inspired by WM8753 which was already converted. Also, this patch fixes the Jive and Spitz machine. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 08 Apr, 2010 4 commits
-
-
Sascha Hauer authored
Using a regular timer results in poll times < 1 jiffie with small buffers, so we loaded the timer with the actual jiffie value. We can be more accurate using a hrtimer. Also, we have to call snd_pcm_period_elapsed after playing period_bytes and not runtime->period_size (which is in samples and not in bytes). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Sascha Hauer authored
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Sascha Hauer authored
When checking if we are DMA capable we have to check for the IMX_SSI_DMA flag which is already set from platform_data instead of setting it again when we want to do DMA. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@Slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Huang Weiyi authored
Remove unused #include <linux/version.h>('s) in sound/soc/codecs/wm2000.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 Apr, 2010 10 commits
-
-
Mark Brown authored
Conflicts due to context changes next to the backported DMA data change: include/sound/soc.h
-
Mark Brown authored
Support interrupt based microphone bias detection. The WM8994 has two microphone bias supplies, with detection supported on both. Detection using GPIOs together with the standard GPIO based jack framework is already supported via the platform data for the WM8994 core driver. Note that as well as the microphone bias itself the system clock and whichever AIF clock is supplying the system clock will need to be enabled for detection to function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
The WM8994 has an interrupt controller which supports interrupts for both CODEC and GPIO portions of the chip. Support this using genirq, while allowing for systems that do not have an interrupt hooked up. Wrapper functions are provided for the IRQ request and free to simplify the code in consumer drivers when handling cases where IRQs are not set up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
-
Daniel Mack authored
This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. [Note that this is a backported version for 2.6.34. Upstream commit is fd23b7de] Signed-off-by: Daniel Mack <daniel@caiaq.de> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Reported-by: Michael Hirsch <m.hirsch@raumfeld.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Otherwise we may try to power down multiple times when the using idle bias off and the driver is removed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
The DCS_DATAPATH_BUSY bit used to monitor the completion of DC servo operations has been deprecated and with some more recente revisions may perform incorrectly, especially when only analogue bypass paths are in use. Switch to using readback from the DC servo command register instead, which is supported for all devices. Without this unacceptably long timeouts may be observed in some circumstances. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
If we need to offset correct the DC servo then don't use runtime recalibration since that is likely to introduce further offsets which will be evident on powerdown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
More recent Wolfson hubs devices add the ability to read back the DC servo calibration information from the register used to write offsets, and later still ones remove the old readback registers. Add support for the new scheme, and use it for WM8994 device revisions that support it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
If the correction wraps around then a substantial offset would be introduced. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
- 02 Apr, 2010 2 commits
-
-
Janusz Krzysztofik authored
With recent (2.6.34) chnages in PCM handling, capture stopped working on my OMAP1510 based Amstrad Delta videophone. Using 2.6.34-rc2, I was able to correct the problem in 3 different ways: 1. reverting commit 7b3a177b, 2. enabling additional jiffies check with echo 4 >/proc/asound/card0/pcm0c0/xrun_debug 3. applying the patch below. Since I wasn't able to reproduce the problem on my i686 PC, I guess the problem is probably machine specific. The patch reuses the method for software emulation of missing hardware pointer, already implemented for playback on OMAP1510. It's possible that event if a hardware pointer is available for capture on this machine, its behaviour may be not compatible with what upper layer expects. If you think the problem may be more general and should be solved differently, on a higher level, I can try to work more on it if you give me a hint. If the patch gets accepted, I suggest it goes as a fix in the current release cycle. Created and tested against linux-2.6.34-rc2. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Tejun Heo authored
Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 29 Mar, 2010 8 commits
-
-
Mark Brown authored
-
Barry Song authored
The way i've factored out the bus probe and removal functions so that there's no code in the individual I2C and SPI functions means that the register() and unregister() functions could just be squashed into the bus_probe() and bus_remove() functions. Signed-off-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Graham Gower authored
[The issue is an attempt to write the pdata without the AC97 device allocated when using ac97.c - also added a comment in soc-core.c for the special case for ac97. -- broonie] Signed-off-by: Graham Gower <graham.gower@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Merge branch 'topic/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.35
-
Tejun Heo authored
Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Stephen Rothwell authored
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Stephen Rothwell authored
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 26 Mar, 2010 2 commits
-
-
Kuninori Morimoto authored
ARM-SHMOBILE series have FIFO-buffered serial interface 2 (FSI2) device which is advanced version of FSI. This patch add simple support for it. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 24 Mar, 2010 3 commits
-
-
Dan Carpenter authored
Sparse caught that initialize "playback" two times instead of initializing "capture". Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Bit operation for fsi_master should be done inside master lock. But soft-reset/interrupt operation were outside of it. This patch modify this problem. It still allow to INT_ST outside-operation on fsi_interrupt, but it is not problem. Because this register doesn't need the bit operation. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 Mar, 2010 4 commits
-
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Current ak4642 was not able to select pll. This patch add support it. It still expect PLL base input pin is MCKI. see Table 5 "setting of PLL Mode" of datasheet Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
This also adds the first DAI operation for AIF3 so fill out the ID and the ops for that too. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
- 22 Mar, 2010 1 commit
-
-
Mark Brown authored
-