- 16 Feb, 2007 40 commits
-
-
Randy Dunlap authored
Fix kernel-doc warnings and in USB core. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
here's a quirklist entry reported by Stephen Murphy. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Oliver Neukum authored
this is Joris' fixes reshuffelled and features renamed as David requested. - acm_set_control is not mandatory, honour that - throtteling is reset upon open - throtteling is read consistently when processing input data Signed-off-by:
Joris van Rantwijk <jorispubl@xs4all.nl> Signed-off-by:
-
Alan Stern authored
Some USB devices do have a configuration 0, in contravention of the USB spec. Normally 0 is supposed to indicate that a device is unconfigured. While we can't change what the device is doing, we can change usbcore. This patch (as852) allows usb_set_configuration() to accept a config value of -1 as indicating that the device should be unconfigured. The request actually sent to the device will still contain 0 as the value. But even if the device does have a configuration 0, dev->actconfig will be set to NULL and dev->state will be set to USB_STATE_ADDRESS. Without some sort of special-case handling like this, there is no way to unconfigure these non-compliant devices. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Pete Zaitcev authored
The status in usb_iso_packet_descriptor should be signed, for the benefit of someone who casts to a long or makes other benign misstep (the principle of least surprise). Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Bryan O'Donoghue authored
A SET_LINE_CODING control request should return a zero length packet as an ACK to the host, during the status phase of a USB transaction. The return value of gs_setup_class() is treated as the number of bytes to write in the status phase of the control request, by gs_setup(). For this case, the value returned by gs_setup_class should be zero for SET_LINE_CODING but, right now, appears to be sizeof(struct usb_cdc_line_coding). However, if after doing the memcpy of the line coding descriptor we set the variable "ret" to be zero, we should return the appropiate ZLP to the host as an ACK in the status phase of the control request. I've tested this out using Linux as both host and slave and confirmed that the following small change fixes the spurious return of sizeof(struct usb_cdc_line_coding)/wLength bytes in the status phase of a USB_CDC_REQ_SET_LINE_CODING request. It's not a huge bug but, it is worth fixing. Signed-off-by:
Bryan O'Donoghue <bodonoghue@codehermit.ie> Signed-off-by:
-
Mike Frysinger authored
Use __u32 rather than u32 in userspace ioctl defines. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Dylan Taft authored
Device will not work as a mass storage device without US_FL_IGNORE_RESIDUE. I bought this mp3 player that takes SD cards here http://www.aiptek.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=AX4&Category_Code=MP3&Store_Code=AS I can provide the errors in dmesg, if necessary, but this flag was determined as necessary by doing a quick google on the errors that were shown in dmesg. Signed-off-by:
Dylan Taft <d13f00l@gmail.com> Signed-off-by:
-
Robert P. J. Day authored
Fix the misspelling of "USBNET_MII" to "USB_USBNET_MII". Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
Zheng XiaoJun authored
Add CIDC USB device to HID blacklist since it is actually a USB token and has its own driver. Signed-off-by:
Zheng XiaoJun <zhengxiaojun@hsic.com.cn> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Adrian Bunk authored
USB_RTL8150 must select MII to avoid link errors. Stolen from a patch by Randy Dunlap. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Oliver Neukum authored
there's a USB mass storage device which exists in two version. One reports the correct size and the other does not. Apart from that they are identical and cannot be told apart. Here's a heuristic based on the empirical finding that drives have even sizes. Signed-off-by:
Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by:
-
Oliver Neukum authored
as the skeleton driver was made ready for autosuspend a race condition was introduced. The reference to get device must be gotten before the autosuspend counter is upped, as this operation may sleep, dropping BKL. Dropping BKL means that the pointer to the device may become invalid. Here's the fix. Signed-off-by:
-
David Hollis authored
The attached patch fixes endian issues in asix_tx_fixup() that prevented AX88772 and AX88178 devices from working on big-endian systems. With the attached patch, all three chips are reported to work on big endian. Signed-off-by:
David Hollis <dhollis@davehollis.com> Signed-off-by:
-
Alan Stern authored
This patch (as849) fixes a bug in the USB hub driver. A single pre-allocated buffer is used for all port status reads, but nothing guarantees exclusive use of the buffer. A mutex is added to provide this guarantee. Signed-off-by:
-
Pete Zaitcev authored
Fix up the error processing path: in usb_submit_urb failed, we forgot to free buffers. Also, don't free buffers in read callback: less error prone, 21 LOC less, no need to comment so much. N.B. write path is ok to do kfree. Signed-off-by:
-
Inaky Perez-Gonzalez authored
usb: descriptor structures have to be packed Many of the Wireless USB decriptors added to usb_ch9.h don't have the __attribute__((packed)) tag, and thus, they don't reflect the wire size. This patch fixes that. Signed-off-by:
Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Alan Stern authored
This patch (as848) adds a useful little debugging message to let us know when ehci-hcd's bus_suspend method runs. The other HCDs have similar messages; now ehci-hcd doesn't need to feel left out. Signed-off-by:
-
Alan Stern authored
This patch (as847) makes some small changes to the hub driver's suspend method: For root hubs, the status URB should be unlinked and other activity stopped _before_ the bus_suspend method is called. The test for hdev->bus being NULL has been removed, since it can never succeed. Signed-off-by:
-
Robert P. J. Day authored
Replace the apparent typo CONFIG_USB_CDCETHER with CONFIG_USB_NET_CDCETHER. Signed-off-by:
-
Joris van Rantwijk authored
I added two fields to struct usb_serial_port to keep track of the throttle state. Other usb-serial drivers typically use private data for such things, but the generic driver can not really do that because some of its code is also used by other drivers (which may have their own private data needs). As it is, I am not sure that this patch is useful in all scenarios. It is certainly helpful for low-bandwidth devices that can hold their data in response to throttling. But for devices that pump data in real-time as fast as possible (webcam, A/D converter, etc), throttling may actually cause more data loss. From: Joris van Rantwijk <jorispubl@xs4all.nl> Signed-off-by: -
Alan Stern authored
This patch (as846) adds the IGNORE_RESIDUE flag to the unusual_devs entry for Sony-Ericsson's P990i phone. Signed-off-by:
Phil Dibowitz <phil@ipom.com> Signed-off-by:
-
Thomas Bächler authored
Hi, one of my users has two USB hard drives that need the following patch, otherwise there are I/O errors similar to those here: http://bugme.osdl.org/show_bug.cgi?id=3223Signed-off-by:
-
YOSHIFUJI Hideaki authored
Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Oliver Neukum authored
in devices.c we have a piece of code for dealing with losing in a race. If we indeed lose the race we don't care whether our own memory allocation worked. The check for that is so early that we return early even if we don't have to. Signed-off-by:
-
Josh Triplett authored
init_endpoint_class calls class_create, and checks the result for an error with IS_ERR; however, if true, it then returns the result of IS_ERR (a boolean) rather than PTR_ERR (the actual errno). Signed-off-by:
Josh Triplett <josh@kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
A simple driver to turn on the charging capability of a USB BlackBerry device when it is plugged into the machine. It does not bind to the device, so all userspace programs can still sync properly with it. Note, if CONFIG_USB_SUSPEND is enabled, it can play havoc with this device as the power to the port will be shut down. This device id will have to be added to the global blacklist table when it is created. Signed-off-by: -
Alan Stern authored
This patch (as850b) disables remote wakeup (and everything else!) on all EHCI ports when the shutdown() method is called. If remote wakeup is left active then some systems will reboot instead of powering off. This fixes Bugzilla #7828. Signed-off-by:
-
git://www.atmel.no/~hskinnemoen/linux/kernel/avr32Linus Torvalds authored
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: [AVR32] Use per-controller spi_board_info structures [AVR32] Warn, don't BUG if clk_disable is called too many times [AVR32] Make sure all genclocks have a parent [AVR32] Remove unnecessary sys_nfsservctl conditional [AVR32] Wire up the SysV IPC calls properly [AVR32] Define ioremap_nocache, ioport_map and ioport_unmap [AVR32] Fix prototypes for __raw_writesb and friends
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] allow drm populated agp memory types cleanups [AGPGART] intel-agp: Use ARRAY_SIZE macro when appropriate [AGPGART] Add agp-type-to-mask-type method missing from some drivers. [AGPGART] Don't try to remap i810 registers on resume. [AGPGART] Allow drm-populated agp memory types [AGPGART] compat ioctl
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Longhaul - Redo Longhaul ver. 2 [CPUFREQ] EPS - Correct 2nd brand test [CPUFREQ] Longhaul - Separate frequency and voltage transition [CPUFREQ] Longhaul - Models of Nehemiah [CPUFREQ] Whitespace fixup [CPUFREQ] Longhaul - Simplier minmult [CPUFREQ] CPU_FREQ_TABLE shouldn't be a def_tristate [CPUFREQ] ondemand governor use new cpufreq rwsem locking in work callback [CPUFREQ] ondemand governor restructure the work callback [CPUFREQ] Rewrite lock in cpufreq to eliminate cpufreq/hotplug related issues [CPUFREQ] Remove hotplug cpu crap [CPUFREQ] Enhanced PowerSaver driver [CPUFREQ] Longhaul - Add VT8235 support [CPUFREQ] Longhaul - Fix guess_fsb function [CPUFREQ] Longhaul - Remove duplicate tables [CPUFREQ] Longhaul - Introduce Nehemiah C [CPUFREQ] fix cpuinfo_cur_freq for CPU_HW_PSTATE [CPUFREQ] Longhaul - Remove "ignore_latency" option
-
Ben Dooks authored
The current driver is not setting the dev field in the private data structure, which can lead to an OOPS if the driver tries to report an error. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Hisch authored
Add format specifier %d for uid in ecryptfs_printk Signed-off-by:
Thomas Hisch <t.hisch@gmail.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Michael Halcrow authored
eCryptfs is gobbling a lot of stack in ecryptfs_generate_key_packet_set() because it allocates a temporary memory-hungry ecryptfs_key_record struct. This patch introduces a new kmem_cache for that struct and converts ecryptfs_generate_key_packet_set() to use it. Signed-off-by:
Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
NeilBrown authored
When NFSD receives a write request, the data is typically in a number of 1448 byte segments and writev is used to collect them together. Unfortunately, generic_file_buffered_write passes these to the filesystem one at a time, so an e.g. 32K over-write becomes a series of partial-page writes to each page, causing the filesystem to have to pre-read those pages - wasted effort. generic_file_buffered_write handles one segment of the vector at a time as it has to pre-fault in each segment to avoid deadlocks. When writing from kernel-space (and nfsd does) this is not an issue, so generic_file_buffered_write does not need to break and iovec from nfsd into little pieces. This patch avoids the splitting when get_fs is KERNEL_DS as it is from NFSd. This issue was introduced by commit 6527c2bdAcked-by:
Nick Piggin <nickpiggin@yahoo.com.au> Cc: Norman Weathers <norman.r.weathers@conocophillips.com> Cc: Vladimir V. Saveliev <vs@namesys.com> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
J. Bruce Fields authored
When setting an ACL that lacks inheritable ACEs on a directory, we should set a default ACL of zero length, not a default ACL with all bits denied. Signed-off-by:
"J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by:
-
J. Bruce Fields authored
We're inserting deny's between some ACEs in order to enforce posix draft acl semantics which prevent permissions from accumulating across entries in an acl. That's fine, but we're doing that by inserting a deny after *every* allow, which is overkill. We shouldn't be adding them in places where they actually make no difference. Also replaced some helper functions for creating acl entries; I prefer just assigning directly to the struct fields--it takes a few more lines, but the field names provide some documentation that I think makes the result easier understand. Signed-off-by:
-
J. Bruce Fields authored
Return just the effective permissions, and forget about the mask. It isn't worth the complexity. WARNING: This breaks backwards compatibility with overly-picky nfsv4->posix acl translation, as may has been included in some patched versions of libacl. To our knowledge no such version was every distributed by anyone outside citi. Signed-off-by:
-
J. Bruce Fields authored
We should be returning ATTRNOTSUPP, not NOTSUPP, when acls are unsupported. Also fix a comment. Signed-off-by:
-
J. Bruce Fields authored
The wrong pointer is being kfree'd in savemem() when defer_free returns with an error. Signed-off-by:
Benny Halevy <bhalevy@panasas.com> Signed-off-by:
-
