Merge tag 'at91-dt3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Merge "Third batch of DT changes for 4.2" from Nicolas Ferre:

- USB host clock refine following changes in drivers
- one little fix for usart pinctrl

* tag 'at91-dt3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: remove useless usb clock
  ARM: at91/dt: remove useless uhpck clock references from ehci defintions
  USB: atmel: update DT bindings documentation
  ARM: at91/dt: at91sam9x5: fix usart1 sck pin definition

Merge tag 'v4.2-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "ARM: rockchip: dts relicensing for 4.2" from Heiko Stuebner:

Relicense all Rockchip-related devicetree files to the GPL2/X11 combo.
I've now finally aquired necessary Acks from all contributors.

* tag 'v4.2-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: relicense rk3288-evb* under GPLv2/X11
  ARM: dts: rockchip: relicense rk3288.dtsi under GPLv2/X11
  ARM: dts: rockchip: relicense rk3188-radxarock.dts under GPLv2/X11
  ARM: dts: rockchip: relicense rk3066a-bqcurie2.dts under GPLv2/X11
  ARM: dts: rockchip: relicense rk3288-thermal.dtsi under GPLv2/X11
  ARM: dts: rockchip: relicense rk3188.dtsi under GPLv2/X11
  ARM: dts: rockchip: relicense rk3066a.dtsi under GPLv2/X11
  ARM: dts: rockchip: relicense rk3xxx.dtsi under GPLv2/X11

The ohci driver now calls clk_set_rate on the uhpck clock (which forwards
set_rate requests to its parent: the usb clock).
Remove useless references to usb clocks from ohci definitions.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

The uhpck is useless for High-Speed communications, remove the reference
to this clock in all ehci definitions.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add documentation for the missing clocks, clock-names, reg and interrupts
properties.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This adds an initial device tree to run Linux on the Cortex-M4 on
the Vybrid based Colibri VF61 module.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "Berlin DT changes for v4.2" from Sebastian Hesselbarth:
- GPLv2/X11 dual licensing
- Mark Berlin DT bindings as unstable
- Updated binding documentation for reworked
  chip/system ctrl nodes

* tag 'berlin-dt-4.2-1' of git://git.infradead.org/users/hesselba/linux-berlin:
  Documentation: bindings: update the berlin chip and system ctrl doc
  Documentation: bindings: move the Berlin clock documentation
  Documentation: bindings: move the Berlin pinctrl documentation
  Documentation: bindings: move the Berlin reset documentation
  Documentation: bindings: update the Berlin controllers documentation
  Documentation: bindings: berlin: consider our dt bindings as unstable
  ARM: dts: berlin: relicense the BG2CD Google Chromecast dts under GPLv2/X11
  ARM: dts: berlin: relicense the berlin2cd dtsi under GPLv2/X11
  ARM: dts: berlin: relicense the BG2 Sony NSZ-GS7 dts under GPLv2/X11
  ARM: dts: berlin: relicense the berlin2 dtsi under GPLv2/X11
  ARM: dts: berlin: relicense the BG2Q Marvell DMP dts under GPLv2/X11
  ARM: dts: berlin: relicense the berlin2q dtsi under GPLv2/X11

Merge tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Merge "Second batch of DT changes for 4.2:" from Nicolas Ferre:
- sama5d4: more peripherals: usarts, uarts, spi, pioD access
- sama5d3: phy address for gmac
- change NFC register map
- regulator additions for the sd/mmc

* tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: sama5d4 xplained: add regulators for v(q)mmc1 supplies
  ARM: at91/dt: sama5d3 xplained: add fixed regulator for vmmc0
  ARM: at91/dt: sama5d3 xplained: add mmc0 vqmmc entry
  ARM: at91/dt: sama5d3 xplained: fill in mmc1 and set it to disabled
  ARM: at91/dt: sama5: reduce the NFC command register map
  ARM: at91/dt: sama5d4: update pinctrl ranges
  ARM: at91/dt: sama5d3 xplained: add phy address for macb0
  ARM: at91/dt: sama5d4 xplained: add spi1 on j14 connector
  ARM: at91/dt: sama5d4: add spi1, spi2 dt nodes
  ARM: at91/dt: sama5d4: add uart0, uart1 dt nodes
  ARM: at91/dt: sama5d4: add usart0, usart1 dt nodes

SCK1 pin is pioC 29. Comment was okay.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add vcc_mmc1 fixed regulator to remove the 'no vmmc regulator found' warning
when probing the mmc1 device.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add fixed regulator for vmmc0 and attach the vmmc for it to the mmc0
node on the SAM5D3 Xplained board. This will remove the following
warning from the kernel:

atmel_mci f0000000.mmc: No vmmc regulator found

Note, atmel_defconfig will need fixed regulator support enabled if this
is to be used properly.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[use a fixed regulator instead of gpio one]
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

The SAM5D3 Xplained device tree is missing the vqmmc node which is
tied to 3.3V on the board. Add this to avoid the kernel warning that
there is no vqmmc node.

atmel_mci f0000000.mmc: No vqmmc regulator found
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

The mmc1 channel is not populated on the SAM5D3 Xplained board, however
it is enabled and therefore the driver is attaching to it.

The node configuration for mmc1 is missing, so add an mmc1 node in the
device tree and set its status to disabled. Also add the vmmc and the
necessary slot configuration if this node were enabled to avoid the following
warnings from the driver:

atmel_mci f8000000.mmc: No vmmc regulator found
atmel_mci f8000000.mmc: No vqmmc regulator found
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

commit 111573cc ("mtd: atmel_nand: check NFC busy flag by HSMC_SR
instead of NFC cmd regs")
check NFC busy by nfc SR instead of NFC cmd regs. So we don't need to
map NFC cmd registers to include NFCBUSY bit.
That means we only need map 0x08000000 instead of 0x10000000 for NFC
cmd regs.

This patch reduce the NFC cmd regs map for sama5d3 & sama5d4.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Update the pinctrl ranges property to support pioD controller whose
mapping is not contiguous with other pio controllers. Without this
update, getting resource will fail, then pinctrl probe will fail too
because there is a missing pio controller.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Specify the phy address on macb0 node aka GEM.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Route SPI1 on the Arduino "in the middle" spi connector.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add sama5d4 spi1, spi2 dt nodes & pinctrl.
Signed-off-by: Suchang Ko <suchangko@samul.kr>
[nicolas.ferre@atmel.com: split patch, reorder & whitespace fixes]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Now that the rework to have one sub-node per device in the chip and
system controllers is done, their dedicated compatible can be removed.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

The Berlin clock documentation was part of the Marvell Berlin SoC
documentation because the Berlin clock configuration was inside the
chip controller. With the recent rework of the chip and system
controller handling (now all sub-devices of the soc and system
controller nodes are registred with simple-mfd, and each device has its
own sub-node), the documentation of the Berlin clock driver can be moved
to the generic clock documentation directory.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

The Berlin pinctrl documentation was part of the Marvell Berlin SoC
documentation because the Berlin pinctrl configuration was inside the
chip and the system controllers. With the recent rework of the chip and
system controller handling (now an MFD driver registers all sub-devices
of the two soc and system controller nodes and each device has its own
sub-node), the documentation of the Berlin pinctrl driver can be moved
to the generic pinctrl documentation directory.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

The Berlin reset documentation was part of the Marvell Berlin SoC
documentation because the Berlin reset configuration was inside the chip
controller. With the recent rework of the chip and system controller
handling (now an MFD driver registers all sub-devices of the two soc and
system controller nodes and each device has its own sub-node), the
documentation of the Berlin reset driver can be moved to the generic
reset documentation directory.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

We're moving from a single node for multiple devices to a node with one
sub-node per sub-device, registered by simple-mfd. Update the
documentation to reflect the changes.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

Because the support of Marvell Berlin SoCs is still a work in progress,
add a statement to explicitly consider our device tree files and
bindings as unstable.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

The current GPLv2 only licensing on this dts makes it very impractical
for other software components licensed under another license.

In order to make it easier for them to reuse our device trees, relicense
this dts under a GPLv2/X11 dual-license.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

The current GPLv2 only licensing on this dtsi makes it very impractical
for other software components licensed under another license.

In order to make it easier for them to reuse our device trees, relicense
this dtsi under a GPLv2/X11 dual-license.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

The current GPLv2 only licensing on this dts makes it very impractical
for other software components licensed under another license.

In order to make it easier for them to reuse our device trees, relicense
this dts under a GPLv2/X11 dual-license.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

The current GPLv2 only licensing on this dtsi makes it very impractical
for other software components licensed under another license.

In order to make it easier for them to reuse our device trees, relicense
this dtsi under a GPLv2/X11 dual-license.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

The current GPLv2 only licensing on this dts makes it very impractical
for other software components licensed under another license.

In order to make it easier for them to reuse our device trees, relicense
this dts under a GPLv2/X11 dual-license.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

The current GPLv2 only licensing on this dtsi makes it very impractical
for other software components licensed under another license.

In order to make it easier for them to reuse our device trees, relicense
this dtsi under a GPLv2/X11 dual-license.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

Add basic support for Hitex LPC4350 Evaluation Board. Board
features a LPC4350 Soc, 8 MB SDRAM, 8 MB SPI Flash, USB and
Ethernet.

More information can be found on:
http://www.hitex.com/index.php?id=3212Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@gmail.com>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Adds basic support for Embedded Artists' LPC4357 Developer's Kit. Board
features a LPC4357 Soc, 32 MB SDRAM, 128 MB NAND Flash, 16 MB SPI
Flash, USB and Ethernet.

More information can be found on:
http://www.embeddedartists.com/products/kits/lpc4357_kit.phpSigned-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

NXP LPC18xx/43xx SoCs are very similar devices and should be able to
share a common base (lpc18xx.dtsi). Diffences between the devices are
put in a dtsi which is specific to that device.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "mvebu dt changes for v4.2 (part #1)" from Gregory CLEMENT:

- A series adding support for the Compulab CM-A510
- Add alias for mdio on Armada 38x

* tag 'mvebu-dt-4.2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: add alias for mdio on Armada 38x
  ARM: dts: dove: Add Compulab SBC-A510 to Makefile
  ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510
  ARM: dts: dove: Remove Compulab CM-A510 from Makefile
  ARM: dts: dove: Add internal i2c multiplexer node

Merge tag 'sti-dt-for-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/dt

Merge "STi DT updates for v4.2, round 2." from Maxime Coquelin:

Highlights:
-----------
 - Add USB3 support to STiH410 & STiH418
 - Add PWM support to STiH416 & STiH407 family
 - Add restart support to STiH416 & STiH407 family
 - Add PMU support to STiH416 & STiH407 family
 - Reorder includes in STiH407 DT files

* tag 'sti-dt-for-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti:
  ARM: STi: DT: STih407: Re-order #include <*.dtsi> files
  ARM: STi: Ensure requested STi's SysCfg Controlled IRQs are enabled at boot
  ARM: STi: STiH407: Enable PMU IRQs
  ARM: STi: STiH407: Enable Cortex-A9 PMU support
  ARM: STi: STiH416: Enable PMU IRQs
  ARM: STi: STiH416: Enable Cortex-A9 PMU support
  ARM: STi: STiH416: Add Restart support for STiH416
  ARM: STi: STiH407: Add Restart support for STiH407
  ARM: STi: STiH416-b2020e: Enable PWM on the B2020 Rev-E
  ARM: STi: STiH416: Add DT nodes for PWM
  ARM: STi: STiH416: Add Pinctrl settings for PWM
  ARM: STi: STiH407: Add DT nodes for for PWM
  ARM: DT: STi: STiH418: Enable USB3 port on stih418-b2199.
  ARM: DT: STi: STiH418: Add miphy28lp optional oscillator clock properties
  ARM: DT: STi: stihxxx-b2120: Enable USB3 port on stih407-b2120 and stih410-b2120
  ARM: DT: STi: STiH407: Add dwc3 usb3 DT node.
  ARM: DT: STi: STiH407: Update picophyreset for the usb3 controllers usb2 phy

Merge tag 'rpi-dt-for-armsoc-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi into next/dt

Merge "RaspberryPi Device Tree changes due for v4.2" from Lee Jones:

* tag 'rpi-dt-for-armsoc-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi:
  ARM: bcm2835: dt: Use 0x4 prefix for DMA bus addresses to SDRAM.
  ARM: bcm2835: dt: Add the mailbox to the device tree
  ARM: bcm2835: dt: Fix i2c0 node name
  ARM: bcm2835: dt: Use pinctrl header
  ARM: bcm2835: dt: Add header file for pinctrl constants
  ARM: bcm2835: dt: Add root properties for Raspberry Pi
  ARM: bcm2835: dt: Add vendor prefix for Raspberry Pi

The Ux500 like other Cortex-A9 SoC's has a Snoop Control
Unit (SCU) and a Watchdog in the same address range as
the local timers. Add these to the SoC device tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC DT Updates for v4.2" from Simon Horman:

* Enable DMA for HSUSB on r8a7790 and r8a7791 SoCs
* Configure the HOME key as wake-up source on kzm9g board
* Use generic names for device nodes on SH Mobile SoCs and boards
* Add "nor-jedec" compatible value to SH Mobile boards
* Add IRQC clock to r8a73a4, r8a779* SoCs
* Remove MSIOF address from r8a7790 and r8a7791 SoCs

* tag 'renesas-dt-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (31 commits)
  ARM: shmobile: r8a7791: Enable DMA for HSUSB
  ARM: shmobile: r8a7791: add USB-DMAC device nodes
  ARM: shmobile: r8a7790: Enable DMA for HSUSB
  ARM: shmobile: r8a7790: add USB-DMAC device nodes
  ARM: shmobile: kzm9g dts: Configure the HOME key as wake-up source
  ARM: shmobile: koelsch dts: Use generic names for device nodes
  ARM: shmobile: lager dts: Use generic names for device nodes
  ARM: shmobile: bockw dts: Use generic names for device nodes
  ARM: shmobile: koelsch dts: Add "nor-jedec" compatible value
  ARM: shmobile: bockw dts: Add "nor-jedec" compatible value
  ARM: shmobile: lager dts: Add "nor-jedec" compatible value
  ARM: shmobile: bockw-reference dts: Add "nor-jedec" compatible value
  ARM: shmobile: henninger dts: Add "nor-jedec" compatible value
  ARM: shmobile: armadillo800eva dts: Use generic names for device nodes
  ARM: shmobile: marzen dts: Use generic names for device nodes
  ARM: shmobile: kzm9d dts: Use generic names for device nodes
  ARM: shmobile: ape6evm dts: Use generic names for device nodes
  ARM: shmobile: sh73a0 dtsi: Use generic names for device nodes
  ARM: shmobile: r8a7791 dtsi: Use generic names for device nodes
  ARM: shmobile: r8a7790 dtsi: Use generic names for device nodes
  ...

Merge "device-tree pxa update" from Robert Jarzmik:

 - clocks descriptions (pxa27x, pxa3xx)
 - timer descriptions (pxa27x, pxa3xx)
 - IPs which are embedded on the SoC
   - keypad
   - udc (USB client)
   - power I2C

These are amongst the building blocks for future pxa device-tree board
description.

* tag 'pxa-dt-4.2' of https://github.com/rjarzmik/linux:
  ARM: dts: pxa: add pxa-timer to pxa27x and pxa3xx
  ARM: dts: pxa: add pxa27x-keypad to pxa27x
  ARM: dts: pxa: add pxa27x-udc to pxa27x
  ARM: dts: pxa: add clocks
  ARM: dts: pxa: add pwri2c to pxa device-tree