- 16 Jul, 2020 33 commits
-
-
Vladimir Oltean authored
Having the users of MSCC_OCELOT_SWITCH_LIB depend on REGMAP_MMIO was a bad idea, since that symbol is not user-selectable. So we should have kept a 'select REGMAP_MMIO'. When we do that, we run into 2 more problems: - By depending on GENERIC_PHY, we are causing a recursive dependency. But it looks like GENERIC_PHY has no other dependencies, and other drivers select it, so we can select it too: drivers/of/Kconfig:69:error: recursive dependency detected! drivers/of/Kconfig:69: symbol OF_IRQ depends on IRQ_DOMAIN kernel/irq/Kconfig:68: symbol IRQ_DOMAIN is selected by REGMAP drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by MSCC_OCELOT_SWITCH_LIB drivers/net/ethernet/mscc/Kconfig:15: symbol MSCC_OCELOT_SWITCH_LIB is selected by MSCC_OCELOT_SWITCH drivers/net/ethernet/mscc/Kconfig:22: symbol MSCC_OCELOT_SWITCH depends on GENERIC_PHY drivers/phy/Kconfig:8: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3 drivers/phy/broadcom/Kconfig:41: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS drivers/net/phy/Kconfig:13: symbol MDIO_BUS depends on MDIO_DEVICE drivers/net/phy/Kconfig:6: symbol MDIO_DEVICE is selected by PHYLIB drivers/net/phy/Kconfig:254: symbol PHYLIB is selected by ARC_EMAC_CORE drivers/net/ethernet/arc/Kconfig:19: symbol ARC_EMAC_CORE is selected by ARC_EMAC drivers/net/ethernet/arc/Kconfig:25: symbol ARC_EMAC depends on OF_IRQ - By depending on PHYLIB, we are causing a recursive dependency. PHYLIB only has a single dependency, "depends on NETDEVICES", which we are already depending on, so we can again hack our way into conformance by turning the PHYLIB dependency into a select. drivers/of/Kconfig:69:error: recursive dependency detected! drivers/of/Kconfig:69: symbol OF_IRQ depends on IRQ_DOMAIN kernel/irq/Kconfig:68: symbol IRQ_DOMAIN is selected by REGMAP drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by MSCC_OCELOT_SWITCH_LIB drivers/net/ethernet/mscc/Kconfig:15: symbol MSCC_OCELOT_SWITCH_LIB is selected by MSCC_OCELOT_SWITCH drivers/net/ethernet/mscc/Kconfig:22: symbol MSCC_OCELOT_SWITCH depends on PHYLIB drivers/net/phy/Kconfig:254: symbol PHYLIB is selected by ARC_EMAC_CORE drivers/net/ethernet/arc/Kconfig:19: symbol ARC_EMAC_CORE is selected by ARC_EMAC drivers/net/ethernet/arc/Kconfig:25: symbol ARC_EMAC depends on OF_IRQ Fixes: f4d0323b ("net: mscc: ocelot: convert MSCC_OCELOT_SWITCH into a library") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
John Ogness authored
A busy-wait loop is used to implement waiting for bits to be copied from the skb to the kernel buffer before retiring a block. This is a problem on PREEMPT_RT because the copying task could be preempted by the busy-waiting task and thus live lock in the busy-wait loop. Replace the busy-wait logic with an rwlock_t. This provides lockdep coverage and makes the code RT ready. Signed-off-by:
John Ogness <john.ogness@linutronix.de> Signed-off-by:
-
Jakub Kicinski authored
Sergey Organov says: ==================== net: fec: a few improvements This is a collection of simple improvements that reduce and/or simplify code. They got developed out of attempt to use DP83640 PTP PHY connected to built-in FEC (that has its own PTP support) of the iMX 6SX micro-controller. The primary bug-fix was now submitted separately, and this is the rest of the changes. NOTE: the patches are developed and tested on 4.9.146, and rebased on top of recent 'net-next/master', where, besides visual inspection, I only tested that they do compile. ==================== Signed-off-by: -
Sergey Organov authored
No need to use snprintf() on a constant string, nor using magic constant in the fixed code was a good idea. Signed-off-by:
Sergey Organov <sorganov@gmail.com> Acked-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Sergey Organov authored
Code of the form "if(x) x = 0" replaced with "x = 0". Code of the form "if(x == a) x = a" removed. Signed-off-by:
-
Sergey Organov authored
Initializing with 0 makes it much easier to identify time stamps from otherwise uninitialized clock. Initialization of PTP clock with current kernel time makes little sense as PTP time scale differs from UTC time scale that kernel time represents. It only leads to confusion when no actual PTP initialization happens, as these time scales differ in a small integer number of seconds (37 at the time of writing.) Signed-off-by:
-
Sergey Organov authored
PPS feature could be useful even when hardware time stamping of network packets is not in use, so remove offending check for this condition from fec_ptp_enable_pps(). Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "by" in a comment. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by:
-
Randy Dunlap authored
Drop doubled words in several comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "the" in a comment. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "to" in a comment. Signed-off-by:
-
Randy Dunlap authored
Drop doubled words "or" and "the" in several comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "not" in a comment. Signed-off-by:
-
Randy Dunlap authored
Drop doubled words in two comments. Fix a spello/typo. Signed-off-by:
-
Randy Dunlap authored
Drop doubled words in several comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "the" in two comments. Signed-off-by:
-
Kieran Bingham authored
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptor -> descriptor Signed-off-by:Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== mlxsw: Offload tc police action This patch set adds support for tc police action in mlxsw. Patches #1-#2 add defines for policer bandwidth limits and resource identifiers (e.g., maximum number of policers). Patch #3 adds a common policer core in mlxsw. Currently it is only used by the policy engine, but future patch sets will use it for trap policers and storm control policers. The common core allows us to share common logic between all policer types and abstract certain details from the various users in mlxsw. Patch #4 exposes the maximum number of supported policers and their current usage to user space via devlink-resource. This provides better visibility and also used for selftests purposes. Patches #5-#7 gradually add support for tc police action in the policy engine by calling into previously mentioned policer core. Patch #8 adds a generic selftest for tc-police that can be used with veth pairs or physical loopbacks. Patches #9-#11 add mlxsw-specific selftests. ==================== Signed-off-by: -
Ido Schimmel authored
Test that policers shared by different tc filters are correctly reference counted by observing policers' occupancy via devlink-resource. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Query the maximum number of supported policers using devlink-resource and test that this number can be reached by configuring tc filters with police action. Test that an error is returned in case the maximum number is exceeded. Signed-off-by:
-
Ido Schimmel authored
Test that upper and lower limits on rate and burst size imposed by the device are rejected by the kernel. Signed-off-by:
-
Ido Schimmel authored
Test tc-police action in various scenarios such as Rx policing, Tx policing, shared policer and police piped to mirred. The test passes with both veth pairs and loopbacked ports. # ./tc_police.sh TEST: police on rx [ OK ] TEST: police on tx [ OK ] TEST: police with shared policer - rx [ OK ] TEST: police with shared policer - tx [ OK ] TEST: police rx and mirror [ OK ] TEST: police tx and mirror [ OK ] Signed-off-by:
-
Ido Schimmel authored
Offload action police when used with a flower classifier. The number of dropped packets is read from the policer and reported to tc. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
-
Ido Schimmel authored
Add core functionality required to support police action in the policy engine. The utilized hardware policers are stored in a hash table keyed by the flow action index. This allows to support policer sharing between multiple ACL rules. Signed-off-by:
-
Ido Schimmel authored
In the policy engine, each ACL rule points to an action block where the ACL actions are stored. Each action block consists of one or more action sets. Each action set holds one or more individual actions, up to a maximum queried from the device. For example: Action set #1 Action set #2 +----------+ +--------------+ +--------------+ | ACL rule +----------> Action #1 | +-----> Action #4 | +----------+ +--------------+ | +--------------+ | Action #2 | | | Action #5 | +--------------+ | +--------------+ | Action #3 +------+ | | +--------------+ +--------------+ <---------+ Action block +-----------------> The hardware has a limitation that prevents a policing action (MLXSW_AFA_POLCNT_CODE when used with a policer, not a counter) from being configured in the same action set with a trap action (i.e., MLXSW_AFA_TRAP_CODE or MLXSW_AFA_TRAPWU_CODE). Note that the latter used to implement multiple actions: 'trap', 'mirred', 'drop'. Work around this limitation by teaching mlxsw_afa_block_append_action() to create a new action set not only when there is no more room left in the current set, but also when there is a conflict between previously mentioned actions. Signed-off-by: -
Ido Schimmel authored
Expose via devlink-resource the maximum number of single-rate policers and their current occupancy. Example: $ devlink resource show pci/0000:01:00.0 ... name global_policers size 1000 unit entry dpipe_tables none resources: name single_rate_policers size 968 occ 0 unit entry dpipe_tables none Signed-off-by: -
Ido Schimmel authored
Add common code to handle all policer-related functionality in mlxsw. Currently, only policer for policy engines are supported, but it in the future more policer families will be added such as CPU (trap) policers and storm control policers. The API allows different modules to add / delete policers and read their drop counter. Signed-off-by:
-
Ido Schimmel authored
Add a resource identifier for maximum global policers so that it could be later used to query the information from firmware. Signed-off-by:
-
Ido Schimmel authored
Add policer bandwidth limits for both rate and burst size so that they could be enforced by a later patch. Signed-off-by:
-
Luo bin authored
add support to update firmware by the devlink flashing API Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
Suraj Upadhyay authored
Remove the unnecessary label from dn_dev_ioctl() and make its error handling simpler to read. Signed-off-by:
Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
The concept of timestamping DSA switches / Ethernet PHYs is becoming more and more popular, however the Linux kernel timestamping code has evolved quite organically and there's layers upon layers of new and old code that need to work together for things to behave as expected. Add this chapter to explain what the overall goals are. Loosely based upon this email discussion plus some more info: https://lkml.org/lkml/2020/7/6/481Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
- 15 Jul, 2020 7 commits
-
-
YueHaibing authored
commit d565b0a1 ("net: Add Generic Receive Offload infrastructure") left behind this, remove it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YueHaibing authored
commit 263e1201 ("mptcp: consolidate synack processing.") left behind this, remove it. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
YueHaibing authored
It is not used since commit 09c75704 ("xfrm: remove flow cache") Signed-off-by:
-
YueHaibing authored
They are not used any more since commit b1edeb10 ("netlabel: Replace protocol/NetLabel linking with refrerence counts") Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== udp_tunnel: NIC RX port offload infrastructure This set of patches converts further drivers to use the new infrastructure to UDP tunnel port offload merged in commit 0ea46047 ("Merge branch 'udp_tunnel-add-NIC-RX-port-offload-infrastructure'"). v3: - fix a W=1 build warning in qede. v2: - fix a W=1 build warning in xgbe, - expand the size of tables for lio. ==================== Signed-off-by:
-
Jakub Kicinski authored
Straightforward conversion to new infra, 1 VxLAN port, handler may sleep. Signed-off-by:
-
Jakub Kicinski authored
Covert to new infra. Looks like this driver was not doing ref counting, and sleeping in the callback. Signed-off-by:
-
