- 13 Nov, 2015 40 commits
-
-
Kővágó, Zoltán authored
commit 8a53554e upstream. When multiple GOP devices exists, but none of them implements ConOut, the code should just choose the first GOP (according to the comments). But currently 'fb_base' will refer to the last GOP, while other parameters to the first GOP, which will likely result in a garbled display. I can reliably reproduce this bug using my ASRock Z87M Extreme4 motherboard with CSM and integrated GPU disabled, and two PCIe video cards (NVidia GT640 and GTX980), booting from efi-stub (booting from grub works fine). On the primary display the ASRock logo remains and on the secondary screen it is garbled up completely. Signed-off-by:
Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1444659236-24837-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Christian Zander authored
commit ba2374fd upstream. In preparation for the installation of a large page, any small page tables that may still exist in the target IOV address range are removed. However, if a scatter/gather list entry is large enough to fit more than one large page, the address space for any subsequent large pages is not cleared of conflicting small page tables. This can cause legitimate mapping requests to fail with errors of the form below, potentially followed by a series of IOMMU faults: ERROR: DMA PTE for vPFN 0xfde00 already set (to 7f83a4003 not 7e9e00083) In this example, a 4MiB scatter/gather list entry resulted in the successful installation of a large page @ vPFN 0xfdc00, followed by a failed attempt to install another large page @ vPFN 0xfde00, due to the presence of a pointer to a small page table @ 0x7f83a4000. To address this problem, compute the number of large pages that fit into a given scatter/gather list entry, and use it to derive the last vPFN covered by the large page(s). Signed-off-by:
Christian Zander <christian@nervanasys.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Chris Wilson authored
commit cc917ab4 upstream. Pinning a userptr onto the hardware raises interesting questions about the lifetime of such a surface as the framebuffer extends that life beyond the client's address space. That is the hardware will need to keep scanning out from the backing storage even after the client wants to remap its address space. As the hardware pins the backing storage, the userptr becomes invalid and this raises a WARN when the clients tries to unmap its address space. The situation can be even more complicated when the buffer is passed between processes, between a client and display server, where the lifetime and hardware access is even more confusing. Deny it. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit 8e7a65aa upstream. We accidentally lost the initial DPLL register write in 1c4e0274 drm/i915: Fix DVO 2x clock enable on 830M The "three times for luck" hack probably saved us from a total disaster. But anyway, bring the initial write back so that the code actually makes some sense. Reported-and-tested-by:
Nick Bowler <nbowler@draconx.ca> References: http://mid.gmane.org/CAN_QmVyMaArxYgEcVVsGvsMo7-6ohZr8HmF5VhkkL4i9KOmrhw@mail.gmail.com Cc: Nick Bowler <nbowler@draconx.ca> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Chris Wilson authored
commit 40a24488 upstream. In order to flush the results from in-batch pipecontrol writes (used for example in glQuery) before declaring the batch complete (and so declaring the query results coherent), we need to set the FlushEnable bit in our flushing pipecontrol. The FlushEnable bit "waits until all previous writes of immediate data from post-sync circles are complete before executing the next command". I get GPU hangs on byt without flushing these writes (running ue4). piglit has examples where the flush is required for correct rendering. Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
David Henningsson authored
commit e8d65a8d upstream. Add the appropriate quirk to indicate the Lenovo G50-80 has a stereo mic input where one channel has reverse polarity. Alsa-info available at: https://launchpadlibrarian.net/220846272/AlsaInfo.txt BugLink: https://bugs.launchpad.net/bugs/1504778Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Alim Akhtar authored
commit b8bb9baa upstream. Since commit 2fad972d ("ARM: dts: Add mclk entry for Peach boards"), sound card detection is broken on peach boards and gives below errors: [ 3.630457] max98090 7-0010: MAX98091 REVID=0x51 [ 3.634233] max98090 7-0010: use default 2.8v micbias [ 3.640985] snow-audio sound: HiFi <-> 3830000.i2s mapping ok [ 3.645307] max98090 7-0010: Invalid master clock frequency [ 3.650824] snow-audio sound: ASoC: Peach-Pi-I2S-MAX98091 late_probe() failed: -22 [ 3.658914] snow-audio sound: snd_soc_register_card failed (-22) [ 3.664366] snow-audio: probe of sound failed with error -22 This patch adds missing assigned-clocks and assigned-clock-parents for pmu_system_controller node which is used as "mclk" for audio codec. Fixes: 2fad972d ("ARM: dts: Add mclk entry for Peach boards") Signed-off-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Kukjin Kim <kgene@kernel.org> Signed-off-by:
-
Alexandre Belloni authored
commit b94e2280 upstream. 0° Kelvin is actually −273.15°C, not -272.15°C. Fix the temperature offset. Also improve the comment explaining the calculation. Reported-by:
Janusz Użycki <j.uzycki@elpromaelectronics.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Cathy Avery authored
commit a54c8f0f upstream. xen-blkfront will crash if the check to talk_to_blkback() in blkback_changed()(XenbusStateInitWait) returns an error. The driver data is freed and info is set to NULL. Later during the close process via talk_to_blkback's call to xenbus_dev_fatal() the null pointer is passed to and dereference in blkfront_closing. Signed-off-by:
Cathy Avery <cathy.avery@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Florian Fainelli authored
commit d836ace6 upstream. DSA expects the host_dev pointer to be the device structure associated with the MDIO bus controller driver. First commit breaking that was c3a07134 ("mv643xx_eth: convert to use the Marvell Orion MDIO driver"), and then, it got completely under the radar for a while. Reported-by:
Frans van de Wiel <fvdw@fvdw.eu> Fixes: c3a07134 ("mv643xx_eth: convert to use the Marvell Orion MDIO driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Arik Nemtsov authored
commit 1a3fe0b2 upstream. During the CT-kill exit flow, the card is powered up and partially initialized to check if the temperature is already low enough. Unfortunately the init bails early because the CT-kill flag is set. Make the code bail early only for HW RF-kill, as was intended by the author. CT-kill is self-imposed and is not really RF-kill. Fixes: 31b8b343 ("iwlwifi: fix RFkill while calibrating") Signed-off-by:
Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Luca Coelho authored
commit f08f6258 upstream. Add 3 new subdevice IDs for the 0x095A device ID and 2 for the 0x095B device ID. Reported-by:
Jeremy <jeremy.bomkamp@gmail.com> Signed-off-by:
-
Johannes Berg authored
commit b5a48134 upstream. The MODULE_FIRMWARE() for 3160 should be using the 7260 version as it's done in the device configuration struct instead of referencing IWL3160_UCODE_API_OK which doesn't even exist. Reported-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Avraham Stern authored
commit e9cb0327 upstream. The csa_countdown flag was not cleared when the AP is stopped. As a result, if the AP was stopped after csa_countdown had started, all the folowing channel switch commands would fail. Fix that by clearing the csa_countdown flag when the AP is stopped. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 2cf5eb3a upstream. The code to send the RX PN data (for each TID) to the firmware has a devastating bug: it overwrites the data for TID 0 with all the TID data, leaving the remaining TIDs zeroed. This will allow replays to actually be accepted by the firmware, which could allow waking up the system. Signed-off-by:
-
Johannes Berg authored
commit 5bd16687 upstream. The code to send the RX PN data (for each TID) to the firmware has a devastating bug: it overwrites the data for TID 0 with all the TID data, leaving the remaining TIDs zeroed. This will allow replays to actually be accepted by the firmware, which could allow waking up the system. Signed-off-by:
-
Dan Carpenter authored
commit eda7d0f3 upstream. "num_read" is in byte units but we are write u16s so we end up write twice as much as intended. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Felix Fietkau authored
commit 029cd037 upstream. ath9k inserts padding between the 802.11 header and the data area (to align it). Since it didn't declare this extra required headroom, this led to some nasty issues like randomly dropped packets in some setups. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arad, Ronen authored
[ Upstream commit db65a3aa ] netlink_dump() allocates skb based on the calculated min_dump_alloc or a per socket max_recvmsg_len. min_alloc_size is maximum space required for any single netdev attributes as calculated by rtnl_calcit(). max_recvmsg_len tracks the user provided buffer to netlink_recvmsg. It is capped at 16KiB. The intention is to avoid small allocations and to minimize the number of calls required to obtain dump information for all net devices. netlink_dump packs as many small messages as could fit within an skb that was sized for the largest single netdev information. The actual space available within an skb is larger than what is requested. It could be much larger and up to near 2x with align to next power of 2 approach. Allowing netlink_dump to use all the space available within the allocated skb increases the buffer size a user has to provide to avoid truncaion (i.e. MSG_TRUNG flag set). It was observed that with many VLANs configured on at least one netdev, a larger buffer of near 64KiB was necessary to avoid "Message truncated" error in "ip link" or "bridge [-c[ompressvlans]] vlan show" when min_alloc_size was only little over 32KiB. This patch trims skb to allocated size in order to allow the user to avoid truncation with more reasonable buffer size. Signed-off-by:
Ronen Arad <ronen.arad@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Joe Perches authored
[ Upstream commit 077cb37f ] It seems that kernel memory can leak into userspace by a kmalloc, ethtool_get_strings, then copy_to_user sequence. Avoid this by using kcalloc to zero fill the copied buffer. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 598c12d0 ] When openvswitch tries allocate memory from offline numa node 0: stats = kmem_cache_alloc_node(flow_stats_cache, GFP_KERNEL | __GFP_ZERO, 0) It catches VM_BUG_ON(nid < 0 || nid >= MAX_NUMNODES || !node_online(nid)) [ replaced with VM_WARN_ON(!node_online(nid)) recently ] in linux/gfp.h This patch disables numa affinity in this case. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit e6740165 ] Since commit 2b018d57 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release"), pppoe_release() calls dev_put(po->pppoe_dev) if sk is in the PPPOX_ZOMBIE state. But pppoe_flush_dev() can set sk->sk_state to PPPOX_ZOMBIE _and_ reset po->pppoe_dev to NULL. This leads to the following oops: [ 570.140800] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e0 [ 570.142931] IP: [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe] [ 570.144601] PGD 3d119067 PUD 3dbc1067 PMD 0 [ 570.144601] Oops: 0000 [#1] SMP [ 570.144601] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pppoe pppox ppp_generic slhc loop crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper acpi_cpufreq evdev serio_raw processor button ext4 crc16 mbcache jbd2 virtio_net virtio_blk virtio_pci virtio_ring virtio [ 570.144601] CPU: 1 PID: 15738 Comm: ppp-apitest Not tainted 4.2.0 #1 [ 570.144601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 570.144601] task: ffff88003d30d600 ti: ffff880036b60000 task.ti: ffff880036b60000 [ 570.144601] RIP: 0010:[<ffffffffa018c701>] [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe] [ 570.144601] RSP: 0018:ffff880036b63e08 EFLAGS: 00010202 [ 570.144601] RAX: 0000000000000000 RBX: ffff880034340000 RCX: 0000000000000206 [ 570.144601] RDX: 0000000000000006 RSI: ffff88003d30dd20 RDI: ffff88003d30dd20 [ 570.144601] RBP: ffff880036b63e28 R08: 0000000000000001 R09: 0000000000000000 [ 570.144601] R10: 00007ffee9b50420 R11: ffff880034340078 R12: ffff8800387ec780 [ 570.144601] R13: ffff8800387ec7b0 R14: ffff88003e222aa0 R15: ffff8800387ec7b0 [ 570.144601] FS: 00007f5672f48700(0000) GS:ffff88003fc80000(0000) knlGS:0000000000000000 [ 570.144601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 570.144601] CR2: 00000000000004e0 CR3: 0000000037f7e000 CR4: 00000000000406a0 [ 570.144601] Stack: [ 570.144601] ffffffffa018f240 ffff8800387ec780 ffffffffa018f240 ffff8800387ec7b0 [ 570.144601] ffff880036b63e48 ffffffff812caabe ffff880039e4e000 0000000000000008 [ 570.144601] ffff880036b63e58 ffffffff812cabad ffff880036b63ea8 ffffffff811347f5 [ 570.144601] Call Trace: [ 570.144601] [<ffffffff812caabe>] sock_release+0x1a/0x75 [ 570.144601] [<ffffffff812cabad>] sock_close+0xd/0x11 [ 570.144601] [<ffffffff811347f5>] __fput+0xff/0x1a5 [ 570.144601] [<ffffffff811348cb>] ____fput+0x9/0xb [ 570.144601] [<ffffffff81056682>] task_work_run+0x66/0x90 [ 570.144601] [<ffffffff8100189e>] prepare_exit_to_usermode+0x8c/0xa7 [ 570.144601] [<ffffffff81001a26>] syscall_return_slowpath+0x16d/0x19b [ 570.144601] [<ffffffff813babb1>] int_ret_from_sys_call+0x25/0x9f [ 570.144601] Code: 48 8b 83 c8 01 00 00 a8 01 74 12 48 89 df e8 8b 27 14 e1 b8 f7 ff ff ff e9 b7 00 00 00 8a 43 12 a8 0b 74 1c 48 8b 83 a8 04 00 00 <48> 8b 80 e0 04 00 00 65 ff 08 48 c7 83 a8 04 00 00 00 00 00 00 [ 570.144601] RIP [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe] [ 570.144601] RSP <ffff880036b63e08> [ 570.144601] CR2: 00000000000004e0 [ 570.200518] ---[ end trace 46956baf17349563 ]--- pppoe_flush_dev() has no reason to override sk->sk_state with PPPOX_ZOMBIE. pppox_unbind_sock() already sets sk->sk_state to PPPOX_DEAD, which is the correct state given that sk is unbound and po->pppoe_dev is NULL. Fixes: 2b018d57 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release") Tested-by:
Oleksii Berezhniak <core@irc.lg.ua> Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c7c49b8f ] Greg reported crashes hitting the following check in __sk_backlog_rcv() BUG_ON(!sock_flag(sk, SOCK_MEMALLOC)); The pfmemalloc bit is currently checked in sk_filter(). This works correctly for TCP, because sk_filter() is ran in tcp_v[46]_rcv() before hitting the prequeue or backlog checks. For UDP or other protocols, this does not work, because the sk_filter() is ran from sock_queue_rcv_skb(), which might be called _after_ backlog queuing if socket is owned by user by the time packet is processed by softirq handler. Fixes: b4b9e355 ("netvm: set PF_MEMALLOC as appropriate during SKB processing") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Greg Thelen <gthelen@google.com> Signed-off-by:
-
Pravin B Shelar authored
[ Upstream commit 31b33dfb ] Earlier patch 6ae459bd tried to detect void ckecksum partial skb by comparing pull length to checksum offset. But it does not work for all cases since checksum-offset depends on updates to skb->data. Following patch fixes it by validating checksum start offset after skb-data pointer is updated. Negative value of checksum offset start means there is no need to checksum. Fixes: 6ae459bd ("skbuff: Fix skb checksum flag on skb pull") Reported-by:
Andrew Vagin <avagin@odin.com> Signed-off-by:
-
Pravin B Shelar authored
[ Upstream commit 6ae459bd ] VXLAN device can receive skb with checksum partial. But the checksum offset could be in outer header which is pulled on receive. This results in negative checksum offset for the skb. Such skb can cause the assert failure in skb_checksum_help(). Following patch fixes the bug by setting checksum-none while pulling outer header. Following is the kernel panic msg from old kernel hitting the bug. ------------[ cut here ]------------ kernel BUG at net/core/dev.c:1906! RIP: 0010:[<ffffffff81518034>] skb_checksum_help+0x144/0x150 Call Trace: <IRQ> [<ffffffffa0164c28>] queue_userspace_packet+0x408/0x470 [openvswitch] [<ffffffffa016614d>] ovs_dp_upcall+0x5d/0x60 [openvswitch] [<ffffffffa0166236>] ovs_dp_process_packet_with_key+0xe6/0x100 [openvswitch] [<ffffffffa016629b>] ovs_dp_process_received_packet+0x4b/0x80 [openvswitch] [<ffffffffa016c51a>] ovs_vport_receive+0x2a/0x30 [openvswitch] [<ffffffffa0171383>] vxlan_rcv+0x53/0x60 [openvswitch] [<ffffffffa01734cb>] vxlan_udp_encap_recv+0x8b/0xf0 [openvswitch] [<ffffffff8157addc>] udp_queue_rcv_skb+0x2dc/0x3b0 [<ffffffff8157b56f>] __udp4_lib_rcv+0x1cf/0x6c0 [<ffffffff8157ba7a>] udp_rcv+0x1a/0x20 [<ffffffff8154fdbd>] ip_local_deliver_finish+0xdd/0x280 [<ffffffff81550128>] ip_local_deliver+0x88/0x90 [<ffffffff8154fa7d>] ip_rcv_finish+0x10d/0x370 [<ffffffff81550365>] ip_rcv+0x235/0x300 [<ffffffff8151ba1d>] __netif_receive_skb+0x55d/0x620 [<ffffffff8151c360>] netif_receive_skb+0x80/0x90 [<ffffffff81459935>] virtnet_poll+0x555/0x6f0 [<ffffffff8151cd04>] net_rx_action+0x134/0x290 [<ffffffff810683d8>] __do_softirq+0xa8/0x210 [<ffffffff8162fe6c>] call_softirq+0x1c/0x30 [<ffffffff810161a5>] do_softirq+0x65/0xa0 [<ffffffff810687be>] irq_exit+0x8e/0xb0 [<ffffffff81630733>] do_IRQ+0x63/0xe0 [<ffffffff81625f2e>] common_interrupt+0x6e/0x6e Reported-by:
Anupam Chanda <achanda@vmware.com> Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Andrey Vagin authored
[ Upstream commit e9193d60 ] Now send with MSG_PEEK can return data from multiple SKBs. Unfortunately we take into account the peek offset for each skb, that is wrong. We need to apply the peek offset only once. In addition, the peek offset should be used only if MSG_PEEK is set. Cc: "David S. Miller" <davem@davemloft.net> (maintainer:NETWORKING Cc: Eric Dumazet <edumazet@google.com> (commit_signer:1/14=7%) Cc: Aaron Conole <aconole@bytheb.org> Fixes: 9f389e35 ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag") Signed-off-by:
Andrey Vagin <avagin@openvz.org> Tested-by:
Aaron Conole <aconole@bytheb.org> Signed-off-by:
-
Aaron Conole authored
[ Upstream commit 9f389e35 ] AF_UNIX sockets now return multiple skbs from recv() when MSG_PEEK flag is set. This is referenced in kernel bugzilla #12323 @ https://bugzilla.kernel.org/show_bug.cgi?id=12323 As described both in the BZ and lkml thread @ http://lkml.org/lkml/2008/1/8/444 calling recv() with MSG_PEEK on an AF_UNIX socket only reads a single skb, where the desired effect is to return as much skb data has been queued, until hitting the recv buffer size (whichever comes first). The modified MSG_PEEK path will now move to the next skb in the tree and jump to the again: label, rather than following the natural loop structure. This requires duplicating some of the loop head actions. This was tested using the python socketpair python code attached to the bugzilla issue. Signed-off-by:
-
Aaron Conole authored
[ Upstream commit 4613012d ] As suggested by Eric Dumazet this change replaces the #define with a static inline function to enjoy complaints by the compiler when misusing the API. Signed-off-by:
-
Alexander Couzens authored
[ Upstream commit 06a15f51 ] There is a small chance that tunnel_free() is called before tunnel->del_work scheduled resulting in a zero pointer dereference. Signed-off-by:
Alexander Couzens <lynxis@fe80.eu> Acked-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Uwe Kleine-König authored
commit 9911a2d5 upstream. The code in pinctrl-imx.c only works correctly if in the imx_pinctrl_soc_info passed to imx_pinctrl_probe we have: info->pins[i].number = i conf_reg(info->pins[i]) = 4 * i (which conf_reg(pin) being the offset of the pin's configuration register). When the imx25 specific part was introduced in b4a87c9b ("pinctrl: pinctrl-imx: add imx25 pinctrl driver") we had: info->pins[i].number = i + 1 conf_reg(info->pins[i]) = 4 * i . Commit 34027ca2 ("pinctrl: imx25: fix numbering for pins") tried to fix that but made the situation: info->pins[i-1].number = i conf_reg(info->pins[i-1]) = 4 * i which is hardly better but fixed the error seen back then. So insert another reserved entry in the array to finally yield: info->pins[i].number = i conf_reg(info->pins[i]) = 4 * i Fixes: 34027ca2 ("pinctrl: imx25: fix numbering for pins") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Mika Westerberg authored
commit 56d4b8a2 upstream. ACPI SSCN/FMCN methods were originally added because then the platform can provide the most accurate HCNT/LCNT values to the driver. However, this seems not to be true for Dell Inspiron 7348 where using these causes the touchpad to fail in boot: i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: controller timed out The values received from ACPI are (in fast mode): HCNT: 72 LCNT: 160 this translates to following timings (input clock is 100MHz on Broadwell): tHIGH: 720 ns (spec min 600 ns) tLOW: 1600 ns (spec min 1300 ns) Bus period: 2920 ns (assuming 300 ns tf and tr) Bus speed: 342.5 kHz Both tHIGH and tLOW are within the I2C specification. The calculated values when ACPI parameters are not used are (in fast mode): HCNT: 87 LCNT: 159 which translates to: tHIGH: 870 ns (spec min 600 ns) tLOW: 1590 ns (spec min 1300 ns) Bus period 3060 ns (assuming 300 ns tf and tr) Bus speed 326.8 kHz These values are also within the I2C specification. Since both ACPI and calculated values meet the I2C specification timing requirements it is hard to say why the touchpad does not function properly with the ACPI values except that the bus speed is higher in this case (but still well below the max 400kHz). Solve this by adding DMI quirk to the driver that disables using ACPI parameters on this particulare machine. Reported-by:
Pavel Roskin <plroskin@gmail.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Shaohua Li authored
commit 424cdc14 upstream. page_counter_memparse() returns pages for the threshold, while mem_cgroup_usage() returns bytes for memory usage. Convert the threshold to bytes. Fixes: 3e32cb2e ("memcg: rename cgroup_event to mem_cgroup_event"). Signed-off-by:
Shaohua Li <shli@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Wolfram Sang authored
commit 36d48fb5 upstream. The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Wolfram Sang authored
commit eadd709f upstream. The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Signed-off-by:
-
Wolfram Sang authored
commit 4f7effdd upstream. The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Dave Airlie authored
commit ae491542 upstream. This zeroes the msg so no random stack data ends up getting sent, it also limits the function to not accepting > 4 i2c msgs. Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Chris Mason authored
commit dc6c5fb3 upstream. The code for btrfs inode-resolve has never worked properly for files with enough hard links to trigger extrefs. It was trying to get the leaf out of a path after freeing the path: btrfs_release_path(path); leaf = path->nodes[0]; item_size = btrfs_item_size_nr(leaf, slot); The fix here is to use the extent buffer we cloned just a little higher up to avoid deadlocks caused by using the leaf in the path. Signed-off-by:
Chris Mason <clm@fb.com> cc: Mark Fasheh <mfasheh@suse.de> Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
-
David Sterba authored
commit 8eb93459 upstream. We don't verify that all the balance filter arguments supplemented by the flags are actually known to the kernel. Thus we let it silently pass and do nothing. At the moment this means only the 'limit' filter, but we're going to add a few more soon so it's better to have that fixed. Also in older stable kernels so that it works with newer userspace tools. Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Mike Snitzer authored
commit ba30670f upstream. Fixes: ac8c3f3d ("dm thin: generate event when metadata threshold passed") Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Russell King authored
commit 8996eafd upstream. Unlike shash algorithms, ahash drivers must implement export and import as their descriptors may contain hardware state and cannot be exported as is. Unfortunately some ahash drivers did not provide them and end up causing crashes with algif_hash. This patch adds a check to prevent these drivers from registering ahash algorithms until they are fixed. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
