For older kernel, < 3.11, no copy to/from buffer with skip support was
defined. This could break builds for this versions of kernel.
Add them here.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Some of the options for mmc host, are not defined in older kernels.
MMC_CAP2_HS400_1_2V, MMC_CAP2_HS400_1_8V, MMC_TIMING_MMC_DDR52 and
MMC_TIMING_MMC_HS400.

To not use them for older versions.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

It is possible that (by mistake) the manifest contains non-control
cports with their protocol set as control-protocol or non-control bundle
with their class set as control-class.

Catch such cases, WARN for them and finally ignore them.

Also WARN if the control cport doesn't have its protocol as
control-protocol and control bundle doesn't have its class as
control-class.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The AP needs to send connected and disconnection events to all
interfaces, before a CPort (other than control CPort) can be used.

For now do it which we initialize the connection, but it should be moved
to operations code later.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Manifest is fetched with control protocol now and so we don't need space
for it in hotplug data.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Control protocol is ready to be used for fetching manifest. Lets do it.

This changes few things:
- Creates/initializes bundle/connection for control protocol initially
  and skips doing the same later.
- Manifest is parsed at link-up now, instead of hotplug which was the
  case earlier. This is because we need device_id (provided during
  link-up) for registering bundle.
- Manifest is fetched using control protocol.

So the sequence of events is:

Event                 Previously       Now
-----                 ----------       ---
Interface Hotplug     create intf      create intf
                      parse mfst

Interface Link Up     init bundles     create control conn
                                       get mfst size
                                       get mfst
                                       parse mfst
                                       init bundles
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add control protocol driver that is responsible for handling operations
on control CPort. The AP also needs to support incoming requests on its
control port. Features not implemented yet are marked as TODO for now.

NOTE: This also fixes cport-bundle-id to 0 and cport-id to 2 for control
protocol.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

A connection and a bundle will be created for interfaces at the very
beginning for control protocol's functioning. And so the list of bundles
and connections for a interface will be non-empty by the time manifest
is parsed.

Currently we are firing a WARN when these lists are found to be
non-empty. Lets fix that to contain single bundle and connection for
control protocol.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Extend sdio implementation, as it for now it was basically stubs.

This implementation is compile tested only since there is no fw or
simulation support yet.
Next step is to add sdio support to gbsim and test it with success
using the mmc_test facility.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add MMC to the list of options that shall be enable.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Greg reported sparse picked up the following warning:
/home/gregkh/ara/greybus/uart.c:105:34: warning: cast to restricted __le16

This is due to the control variable in gb_uart_serial_state_request which
needs to be declared __le16 not __u16.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reported-by: Greg Kroah-Hartman <gregkh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Latch signals coming from UART module for
- GB_UART_CTRL_DCD
- GB_UART_CTRL_DSR
- GB_UART_CTRL_RI
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This reverts commit 698d4bd3e7541a660a3c3665f0af9e787650a239 as Alex
says it is broken.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This resolves a conflict with es2.c that I fixed up.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

ES2 give us more endpoints. Use them to map one cport to two endpoints
(in and out). Because there is more cports than endpoints, we still
need to mux other cports traffic on 2 endpoints.
Firmware currently assumes these endpoints are 2 and 3.

By default, all cports are muxed.
To map one cport to 2 endpoints, use map_cport_to_ep().
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

ES2 support 16 endpoints. Update es2.c to allocate endpoints, urbs
and buffers for these new endpoints.

Currently, they are not yet used and es2.c is working in legacy mode
(only original endpoints are used).
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Instead of keep cport buffers, urbs and endpoints in es1_ap_dev,
move them in two dedicated struct (es1_cport_in and es1_cport_out),
in order to ease the migration to es2 (increase the number of endpoint).
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We now limit the maximum value for both host and module CPort ids,
and we know they can always be represented in a single byte.

Make use of this by using only one of the two pad bytes for encoding
the CPort id in a message header.

(Note that we have never used a CPort higher than 255.  Encoding
such a small CPort id in little endian 2-byte format has the same
result as what is done here.)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For ES1 and ES2, we use pad bytes in an operation message header to
encode the CPort ID used for transferring the message.  The pad
bytes should otherwise be zero, and we ensure this as the message
is passed to or from the upper layer.

If host-side CPort ID 0 is used, we have no way of knowing whether
the CPort field has been "packed" into the header.

To allow detection of this, reserve host CPort id 0.  Update
cport_id_valid() to treat 0 as invalid.

(CPort ID 0 is reserved by one of the UniPro standards.  We'll
assume for now that we never use it for Greybus.)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We limit the number of host-side CPorts to a fixed maximum (which
is less than the 4096 that UniPro allows).  This patch imposes a
similar limit on the CPort IDs defined by modules (signaling an
error if one too large is found in a manifest).

It seems reasonable to use the same value for both limits.  Change
the name of the constant that defines the host limit and use it for
both.  Update cport_id_valid() to enforce the maximum.

(Ultimately we should impose a limit like this; this change is being
made in preparation for supporting multiple connections over a
single CPort.)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For the ES1 and ES2 host interfaces we encode the CPort ID over
which the message should be sent within the message itself.  The
CPort ID is recorded in unused pad bytes found in the operation
message header in order to avoid introducing misaligned messages.

This patch defines some helper routines to abstract this activity.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Define a public predicate that defines whether a CPort ID is valid.

Use it in the message_send() routine, and make the message reported
more accurately reflect the error.  Also use it to check whether the
CPort ID in a received message is valid; if it is not, just drop the
message.

Get rid of local variable "buffer" in message_send(); it adds no
value.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Currently, if an error occurs creating a bundle, we simply
return an error without cleaning up any of the bundles that
had already been successfully set up.

Add code to destroy bundles that have been created in the event
an error occurs.  Add a check to ensure the interface's list of
bundles was empty before parsing for bundles begins.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Currently gb_bundle_destroy() takes an interface as an argument,
and really doesn't do what a function by that name should do.

What it now does is delete all bundles associated with a given
interface.  What it should do is destroy a single bundle.

Move the looping logic out of gb_bundle_destroy() and into its
caller, gb_interface_destroy().  Pass each bundle in an interface to
gb_bundle_destroy(), which will do what's required to destroy a
single bundle (including removing it from its interface's bundle
list under protection of the lock).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Rearrange gb_bundle_find() so it follows the pattern used by
gb_connection_find().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Currently, if an error occurs creating a connection, we simply
return an error without cleaning up any of the connections that
had already been successfully set up.

Add code to destroy connections that have been created in the event
an error occurs.  Add a check to ensure the bundle's list of
connections was empty before parsing for CPorts begins.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

I did this recently for the endo id allocation code.

It's clearer now that the allocation of a CPort ID to use for
the AP side of a connection is not very complicated, and it
happens in a pretty controlled environment.  The functions that
abstract getting and releasing those ids don't really add that
much value.

This patch removes gb_connection_hd_cport_id_alloc() and
gb_connection_hd_cport_id_free(), and just open-codes their
activity in the few places they are called.

It is obvious now that the CPort ID allocation isn't done in
atomic context, so we can change the ida_simple_get() call to
use GFP_KERNEL.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Although a connection records its protocol id when it gets
created, its protocol handler doesn't actually get assigned
until gb_connection_bind_protocol() is called.

In gb_connection_create() there are some error paths in
which a reference to the connection's protocol is released
before the protocol handler has been associated with the
connection.

Get rid of those calls.

As a result, we will never pass a null protocol pointer to
gb_protocol_put().  Add a precautionary warning in that
function in the event that ever occurs.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

When an error occurs in the device_add() call for a connection, the
device reference is dropped as required.  Because that's the device's
only reference, that will also lead to gb_connection_release() being
called, which frees the connection structure.

Right now we're then making an extra request to free the connection,
which is wrong.  Fix that.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

There is lack of unregister and free the tty driver.
This patch fixes it.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

__init does not belong in a .h file, as it does not do anything there,
so remove all instances of it.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

WARNING: /home/viresh/work/repos/ara/greybus/greybus.o(.init.text+0xb8):
Section mismatch in reference from the function init_module() to the
function .exit.text:gb_endo_exit()

The function __init init_module() references
a function __exit gb_endo_exit().

Fix it by removing __exit from endo_exit().

Fixes: cf64356c5151 ("endo: define endo_init() and endo_exit()")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Check at connection creation time for an attempt to create a
connection with an interface CPort ID that's the same as one that's
already been created.

Define a new helper function to look for such a duplicate.  The
check for a duplicate is only performed at initialization time,
and CPorts are initialized serially for each bundle, so there's
no need to acquire the list lock for this search.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Check at bundle creation time to ensure we're not creating a bundle
with an id that's the same as one that's already been created.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Rework the the code that parses the manifest for bundles so it only
touches each manifest descriptor once.  (Previously the list was
scanned from the beginning repeatedly until all bundles were found.)
Shorten the name of the descriptor variable, to avoid line wrap.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Rework the the code that parses the manifest for CPorts associated
with a bundle so it only touches each manifest descriptor once.
(Previously the list was scanned from the beginning repeatedly
until all bundle CPorts were found.)  Shorten the name of the
descriptor variable, to avoid line wrap.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

An initialized bundle structure contains a pointer to its
interface.  Because of this there's no need to provide
the interface pointer to gb_manifest_parse_cports().  This
also precludes the possibility of passing a bad interface
pointer.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch incorporates some very small cleanups to "manifest.c":
    - Rearrange code a bit in gb_manifest_parse() that ensures a
      manifest is big enough to hold a header.  If the manifest is
      exactly the size of a header, the error reported will now be
      "...must have 1 interface..." rather than "short manifest".
    - Fix the function comment for gb_manifest_parse_cports().
    - Use "an interface," not "a interface," and don't capitalize.
    - Delete some braces when getting interface product string.
    - A few other minor changes to comments and white space.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>