Resync from rnndb database, to pull in register defines for:
 * eDP
 * HDMI/HDCP
 * mdp4/mdp5 YUV support
 * mdp5 hw cursor support
Signed-off-by: Rob Clark <robdclark@gmail.com>

On !SMP systems spinlocks do not exist. Thus checking of they
are active will always fail.

Use
  assert_spin_locked(lock);
instead of
  BUG_ON(!spin_is_locked(lock));
to not BUG() on all UP systems.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
[robclark: drop stray ')']
Signed-off-by: Rob Clark <robdclark@gmail.com>

3d3f8b1f ("drm/bridge: make bridge registration independent of drm
flow") resulted that the hdmi bridge object would be leaked at teardown.
Just switch over to devm_kzalloc() as the easy way to solve this.
Signed-off-by: Rob Clark <robdclark@gmail.com>

As a result of atomic DPMS support, the various prepare/commit hooks get
called in a way that msm dislikes.  We were expecting prepare/commit to
bracket a modeset, which is no longer the case.  This was needed to hold
various extra clk's (such as interface clks) on while we are touching
registers, and in the case of mdp4 holding vblank enabled.

The most straightforward way to deal with this, since we already have
our own atomic_commit(), is to just handle prepare/commit internally to
the driver (with some additional vfuncs for mdp4 vs mdp5), and switch
everything over to instead use the new enable/disable hooks.  It doesn't
really change too much, despite the code motion.  What used to be in the
encoder/crtc dpms() fxns is split out into enable/disable.

We should be able to drop our own enable-state tracking, as the atomic
helpers should do this for us.  But keeping that for the short term for
extra debugging as atomic stablizes.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Only the legacy helpers use these entry points.  Don't populate them
with transitional helpers, since that just makes things more confusing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[robclark: reword commit msg]
Signed-off-by: Rob Clark <robdclark@gmail.com>

We had _power_up(), but drivers also need to be able to power down.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

The atmel-hlcdc driver selects DRM_GEM_CMA_HELPER which makes use of
symbols only available when HAVE_DMA_ATTRS is selected.
Add a dependency on the ARM architecture which select this option.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>

The msm gpu drivers depend on both the DT mechanism and the
common clk handling code, if they are not enabled, we get
a number of build errors:

In file included from drivers/gpu/drm/msm/hdmi/hdmi.h:27:0,
                 from drivers/gpu/drm/msm/hdmi/hdmi_bridge.c:18:
drivers/gpu/drm/msm/msm_drv.h:45:24: fatal error: mach/board.h: No such file or directory
 #include <mach/board.h>
                        ^

drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c:503:2: error: implicit declaration of function 'devm_clk_register' [-Werror=implicit-function-declaration]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>

When page flipping, we need to mark the new fb as active and unmark the active
flag for the old fb (if different).
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@gmail.com>

The shmobile drm driver selects BACKLIGHT_CLASS_DEVICE
as of 0a5a5499 "drm: shmobile: Add dependency on
BACKLIGHT_CLASS_DEVICE", but that option in turn depends
on BACKLIGHT_LCD_SUPPORT, so we actually have to select
both, or alternatively use 'depends on BACKLIGHT_CLASS_DEVICE'.

Further, the driver uses FB_SH_MOBILE_MERAM if that is
enabled, but this breaks if MERAM is a module while
the DRM driver is built-in. To solve this, add a dependency
on "FB_SH_MOBILE_MERAM || !FB_SH_MOBILE_MERAM", which forces
DRM_SHMOBILE to be a module if FB_SH_MOBILE_MERAM set to 'm'.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>

The newly added sti driver requires the drm_panel helpers,
and we get a link error if they are not enabled

ERROR: "drm_panel_attach" [drivers/gpu/drm/sti/stidvo.ko] undefined!
ERROR: "of_drm_find_panel" [drivers/gpu/drm/sti/stidvo.ko] undefined!

This adds a 'select' statement as we have for the other drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>

When the reset controller subsystem is disabled, this driver
fails to build:

drivers/gpu/drm/rockchip/rockchip_drm_vop.c: In function 'vop_initial':
drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1267:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration]

The easiest solution is to add a dependency in Kconfig to avoid
that case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>

The simple panel code uses the backlight interface to
find a device, which fails when backlight is disabled:

drivers/built-in.o: In function `panel_simple_platform_probe':
:(.text+0xd3c48): undefined reference to `of_find_backlight_by_node'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>

The sharp panel code uses the backlight interface to
find a device, which fails when backlight is disabled:

drivers/built-in.o: In function `sharp_panel_probe':
:(.text+0x5ceac): undefined reference to `of_find_backlight_by_node'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>

The run-length encoding algorithm should compare 16-bit encoded pixel
values instead of comparing raw pixel values. It allows pixels
with similar but different colors to be encoded as repeat pixels, and
thus potentially save USB bandwidth.
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Haixia Shi <hshi@chromium.org>
Signed-off-by: Dave Airlie <airlied@gmail.com>

Change agp_free_page_array to use kvfree function,
remove the duplicated code.
Signed-off-by: Yalin Wang <yalin.wang@sonymobile.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This backmerges drm-fixes into drm-next mainly for the amdkfd
stuff, I'm not 100% confident, but it builds and the amdkfd
folks can fix anything up.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Conflicts:
	drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
	drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h

drm/panel: Changes for v3.20-rc1

This contains the long-awaited drm_bridge series that makes Chromebooks
work for people. I had thought this would've been perfect by now, but
then I go and build test it and the first thing it does is yell about a
recursive dependency. I fixed that up because I was feeling bad for not
getting around to look at this earlier.

Biseds that there is new support for two more panels, a couple of fixup
patches to the Sharp LQ101R1SX01 dual-channel DSI panel driver and a
potential NULL pointer dereference fix.

* tag 'drm/panel/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux: (23 commits)
  drm/bridge: dw-hdmi: Adapt to bridge API change
  drm/sti: fixup for bridge interface
  drm/bridge: dw-hdmi: Fix return error path
  drm: Check the right variable when setting formats
  Documentation: bridge: Add documentation for ps8622 DT properties
  Documentation: devicetree: Add vendor prefix for parade
  Documentation: drm: bridge: move to video/bridge
  drm/bridge: ptn3460: use gpiod interface
  drm/bridge: ptn3460: probe connector at the end of bridge attach
  drm/bridge: ptn3460: support drm_panel
  drm/exynos: dp: support drm_bridge
  drm/bridge: ptn3460: Convert to I2C driver model
  drm/bridge: make bridge registration independent of drm flow
  drm/bridge: do not pass drm_bridge_funcs to drm_bridge_init
  drm/bridge: ptn3460: Few trivial cleanups
  drm/panel: simple: Add AVIC TM070DDH03 panel support
  of: Add vendor prefix for Shanghai AVIC Optoelectronics Co., Ltd.
  drm/panel: sharp: lq101r1sx01: Remove unneeded include
  drm/panel: sharp: lq101r1sx01: Respect power timings
  drm/panel: sharp: lq101r1sx01: Add delay after display on
  ...

Commit fbc4572e9c48e45b ("drm/bridge: make bridge registration independent of
drm flow") introduced some drm/bridge API modifications. Make the necessary
changes so that we can avoid the build breakage:

drivers/gpu/drm/bridge/dw_hdmi.c: In function 'dw_hdmi_bridge_destroy':
drivers/gpu/drm/bridge/dw_hdmi.c:1378:2: error: implicit declaration of function 'drm_bridge_cleanup' [-Werror=implicit-function-declaration]
drivers/gpu/drm/bridge/dw_hdmi.c: At top level:
drivers/gpu/drm/bridge/dw_hdmi.c:1471:2: error: unknown field 'destroy' specified in initializer
drivers/gpu/drm/bridge/dw_hdmi.c: In function 'dw_hdmi_register':
drivers/gpu/drm/bridge/dw_hdmi.c:1535:2: error: implicit declaration of function 'drm_bridge_init' [-Werror=implicit-function-declaration]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

So sti doesn't build because the bridge interfaces changes didn't
catch up to its new DVO driver.

Now I might just carry this patch, but I might just push the
bridge pull into a side-pull until someone resolves it.

So this might not be the right solution to the problem, so
please figure it out and let me know ASAP.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

If devm_request_threaded_irq() fails we should jump to 'err_iahb' label that
will disable the clocks that were previously enabled.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

When setting the video bus supported formats for a display device using
drm_display_info_set_bus_formats(), check for the proper variable after
duplicating memory.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add documentation for DT properties supported by ps8622/ps8625
eDP-LVDS converter.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

ps8622 eDP-LVDS converter bridge chip is from parade technologies
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Move drm/bridge documentation to video/bridge.
Also, add proper documentation for gpios used by ptn3460.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Modify driver to support gpiod interface.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Force bridge connector detection at the end of the bridge attach.
This is needed to detect the bridge connector early.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add drm_panel calls to the driver to make the panel and
bridge work together in tandem.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Modify driver to support drm_bridge.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Use drm_bridge helpers to modify the driver to support I2C driver model.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
[treding@nvidia.com: remove recursive dependency on I2C]
Signed-off-by: Thierry Reding <treding@nvidia.com>

Currently, third party bridge drivers(ptn3460) are dependent
on the corresponding encoder driver init, since bridge driver
needs a drm_device pointer to finish drm initializations.
The encoder driver passes the drm_device pointer to the
bridge driver. Because of this dependency, third party drivers
like ptn3460 doesn't adhere to the driver model.

In this patch, we reframe the bridge registration framework
so that bridge initialization is split into 2 steps, and
bridge registration happens independent of drm flow:
--Step 1: gather all the bridge settings independent of drm and
	  add the bridge onto a global list of bridges.
--Step 2: when the encoder driver is probed, call drm_bridge_attach
	  for the corresponding bridge so that the bridge receives
	  drm_device pointer and continues with connector and other
	  drm initializations.

The old set of bridge helpers are removed, and a set of new helpers
are added to accomplish the 2 step initialization.

The bridge devices register themselves onto global list of bridges
when they get probed by calling "drm_bridge_add".

The parent encoder driver waits till the bridge is available
in the lookup table(by calling "of_drm_find_bridge") and then
continues with its initialization.

The encoder driver should also call "drm_bridge_attach" to pass
on the drm_device to the bridge object.

drm_bridge_attach inturn calls "bridge->funcs->attach" so that
bridge can continue with drm related initializations.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Assign the pointer to bridge ops structure(drm_bridge_funcs) in
the bridge driver itself, instead of passing it to drm_bridge_init.

This will allow bridge driver developer to pack bridge private
information inside the bridge object and pass only the drm-relevant
information to drm_bridge_init.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This patch does the following changes:
	-- Use usleep_range instead of udelay.
	-- Remove driver_private member from ptn3460 structure.
	-- Make all possible functions and structures static.
	-- Use dev_err for non-DRM errors.
	-- Arrange header files alphabetically.
	-- s/edid/EDID in all error messages.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The Shanghai AVIC Optoelectronics TM070DDH03 is a 7" 1024x600 TFT LCD
panel connecting to a 24-bit RGB LVDS interface.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Shanghai AVIC Optoelectronics Co., Ltd. is a subsidiary of Tianma
Microelectronics Co., Ltd. and designs and manufactures TFT LCDs.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Nothing in the file needs symbols from include/linux/host1x.h, so remove
the include.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Before shutting down the display using the DCS display_off command, wait
for 4 frames according to the datasheet.

Furthermore, after enabling the power supply, the supply voltage needs
around 10 ms to settle. After that, another 120 ms is required before a
DCS exit_sleep_mode command can be sent.

While at it, no longer send the DCS soft_reset command. This is totally
unnecessary because we've just powered up the display, hence it will be
in a reset state already.
Signed-off-by: Thierry Reding <treding@nvidia.com>

After switching the display on (using the DCS display_on command), wait
for 6 frames (100ms at 60 Hz) to give the display more time to prepare.
Failing to do this results in the panel not initializing properly in a
large number of cases.
Signed-off-by: Thierry Reding <treding@nvidia.com>

This patch adds support for the GiantPlus GPG48273QS5 4.3" WQVGA TFT LCD
panel to the simple-panel driver.

This panel is connected via a parallel bus and uses both HSYNC and
VSYNC, whose lengths are unfortunately not clearly defined. The
datasheet only specifies the front- and backporch length, but the timing
diagram suggests that both sync signals should be asserted for exactly
one clock cycle.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>