- 13 Oct, 2008 29 commits
-
-
Igor M. Liplianin authored
Add support for DvbWorld USB cards with STV0288 demodulator. Those cards use Earda EDS-1547 tuner. Signed-off-by:
Igor M. Liplianin <liplianin@me.by> Signed-off-by:
Steven Toth <stoth@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Igor M. Liplianin authored
Remove NULL pointer in stb6000 driver, as it raises error for DvbWorld USB card. Signed-off-by:
-
Igor M. Liplianin authored
Allow custom inittab for ST STV0288 demodulator, as it is needed for DvbWorld USB card. Signed-off-by:
-
Steven Toth authored
This means that when developers add new commands then they'll be see the DTV_MAX_COMMAND define and will be more likely to modify it, without having to modify the command validation code. Signed-off-by:
-
Darron Broad authored
Fixes switching from S2API to legacy where legacy params given to S2API aware demods are cached ones and not those implied in the legacy API. It was found (on an S2API aware demod at least) that after using an S2API aware application and then switching to a legacy application that prior S2API params were in effect were legacy has only implied values. This fixes this. Signed-off-by:
Darron Broad <darron@kewl.org> Signed-off-by:
-
Darron Broad authored
Quick fix to stop an OOPS if illegal commands are dumped in S2API. Signed-off-by:
-
Darron Broad authored
Add some sanity checking to data input via S2API to the cx24116 demod. This patch is valid for both s2-mfe and s2. It was found when testing KAFFEINE with S2API support that invalid modulation modes amongst other parameters were being delivered to the demod. In order to debug this sanity checking has been added. An example session would involve kaffeine setting QAM_AUTO when querying DVB-T, then later when trying to tune to DVB-S this cached value would be presented in error. Signed-off-by:
-
Laurent Pinchart authored
This adds required quirks for the Compaq Presario B1200 and Acer Travelmate 7720 integrated webcams. Signed-off-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Brian Rogers authored
The IR controller has a couple quirks. It won't respond until some other device on the bus is probed. To work around that, probe 0x50 first. Then, since it won't respond to a zero-byte read, probe with a one-byte read. Signed-off-by:
Brian Rogers <brian_rogers@comcast.net> [mchehab.redhat.com: Fix merge conflicts and remove an unused var] Signed-off-by:
-
Huang Weiyi authored
Removed duplicated include "media/cx2341x.h" in drivers/media/video/cx23885/cx23885-417.c. Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Ian Armstrong authored
Modified yuv register update handling to remove a potential race condition which could occur with the first video frame. Also removed a forced yuv position update, since changing the source video dimensions or interlace settings doesn't affect the frame already being displayed. Signed-off-by:
Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Ian Armstrong authored
When the framebuffer format was queried via VIDIOC_G_FBUF, V4L2_FBUF_FLAG_OVERLAY would only be correctly returned for certain screen depths. Signed-off-by:
-
Ian Armstrong authored
Signed-off-by:
-
Ian Armstrong authored
Signed-off-by:
-
Hans Verkuil authored
The service_set field was used in saa7115 and cx25840 to determine whether raw or sliced VBI was desired. This is incorrect since it is perfectly valid to select sliced VBI with a service_set of 0. Instead these drivers should checked on VIDIOC_S_FMT whether the type field matches the raw or sliced VBI type. Updated ivtv accordingly. Signed-off-by:
-
Hans Verkuil authored
Remove the vidioc_enum_fmt_vbi_cap ops: it was scheduled for removal in 2.6.28 since the v4l2 specification says that V4L2_BUF_TYPE_VBI_CAPTURE should not support VIDIOC_ENUM_FMT. It's also pretty pointless. Signed-off-by:
-
Hans Verkuil authored
Add missing include. Signed-off-by:
-
Hans Verkuil authored
Suggested by Martin Dauskardt. This is conform what the other drivers do. Signed-off-by:
-
Thierry MERLE authored
In dvb_init(), case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_KWORLD_DVB_310U: can be put in the same case than EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 since they do the same thing. Signed-off-by:Thierry MERLE <thierry.merle@free.fr> Signed-off-by:
-
Alexey Klimov authored
This patch adds printk messages, adds checking if frequency is set, adds return -EINVAL in right places in zoltrix-radio. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Signed-off-by:
Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by:
-
Alexey Klimov authored
Added return -EBUSY and fixed codingstyle issue Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Herbert Graeber authored
- Add USB ID for MSI DIGIVOX mini III (1462:8807) Signed-off-by:
Herbert Graeber <herbert@graeber-clan.de> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
- cast firmware data to u8 - remove cpu_to_le16 from switch-case label Signed-off-by:
-
Antti Palosaari authored
- remove unnecessary #undef's Signed-off-by:
-
Antti Palosaari authored
- enable Maxlinear mxl5005s tuner RSSI Thaks to Jose Alberto for finding this setting. Thanks-to: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by:
-
Antti Palosaari authored
- fix wrong GPIO that causes 2nd FE not to work ater warmboot Thanks to Andrew Williams <andrew.williams@joratech.com> for reporting this. Signed-off-by:
-
Antti Palosaari authored
- add module parameter for selecting DVB-T / DVB-C mode Signed-off-by:
-
Antti Palosaari authored
- unlock I2C-mutex also in error case Signed-off-by:
-
- 12 Oct, 2008 11 commits
-
-
Hans Verkuil authored
Prevent the zoran driver sources from cluttering the video directory. This changeset only moves the drivers and it does not fix any of the checkpatch warnings/errors to keep the changeset clean. Signed-off-by:
-
Tim Farrington authored
Well, one thing you encouraged me to do was re-test some of my cards which contained the xc3028-zarlink combo. Which led me to test a Dvico FusionHDTV Pro. Almost a year ago, Chris Pascoe did a patch for this which can be found at his ~pascoe/xc-test at Linuxtv. This worked very well, however that was using his version of firmware. Alas, someone attempted to use this and patch v4l-dvb, and messed it up. So I've fixed it. I enclose the patch against today's tree (containing your latest tuner-xc2028.c patch). The card now works very well, well with DVB-T anyway. Signed-off-by:
Tim Farrington <timf@iinet.net.au> Signed-off-by:
-
Hans Verkuil authored
The v4l core creates four different video devices (video, vbi, radio, vtx) and each has its own range of minor numbers. However, modern devices keep increasing the number of devices that they need so a maximum of 64 video devices will not be enough in the future. In addition this scheme makes it very hard to add new device types. This patch disconnects the kernel number allocation (e.g. video0, video1, etc.) from the actual minor number (just pick the first free minor). This allows for much more flexibility in the future. However, it does require the use of udev. For those who cannot use udev a new CONFIG option was created that changes the allocation scheme back to the old behavior. Thanks to Greg KH for suggesting this approach during the 2008 LPC. In addition, several bugs were fixed in the ivtv and cx18 drivers: these drivers try to allocate specific kernel numbers but that scheme contained a bug which caused what should have been e.g. video17 to appear as e.g. video2. Signed-off-by:
-
Andy Walls authored
cx18: Fix warning message for DMA done notification for inactive stream. The warning message would always gripe that the radio stream was to blame, which was misleading and wrong (/dev/radioN nodes never transfer data). Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Andy Walls authored
cx18: Add entries for the Leadtek PVR2100 and Toshiba Qosmio DVB-T/Analog capture cards. Both cards are hybrids cards, but no digital capture functionality has been added yet. These entries are a first guess at the card entries to get analog working, given the information available. Terry Wu <terrywu at leadtek.com.tw> provided a pointer to information for the PVR2100. Martin Juhl <mj at casalogic.dk>, an owner of the Toshiba DVB-T/Analog tuner card, provided the DDR timing information from his Windows inf file. Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Jean-Francois Moine authored
- separate functions for bridge and sensor exchanges - delays added after some exchanges - other sensor type Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Erik Andren authored
Signed-off-by:
Erik Andren <erik.andren@gmail.com> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
