Merge tag 'omap-for-v5.6/ti-sysc-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

dts changes for omaps for ti-sysc driver for v5.6 merge window

Devicetree changes for omaps to configure more devices to probe with
ti-sysc interconnect target module:

- Configure am4 qspi

- Configure aes, des and sham accelerators for am3, 4 and dra7

- Configure iommus for omap4, 5 and dra7

- Add a generic compatible for sdma, and configure omap2 and 3 sdma

* tag 'omap-for-v5.6/ti-sysc-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (24 commits)
  ARM: dts: omap5: convert IOMMUs to use ti-sysc
  ARM: dts: omap4: convert IOMMUs to use ti-sysc
  ARM: dts: dra74x: convert IOMMUs to use ti-sysc
  ARM: dts: dra7: convert IOMMUs to use ti-sysc
  ARM: dts: Configure interconnect target module for dra7 des
  ARM: dts: Configure interconnect target module for am4 des
  ARM: dts: Configure interconnect target module for dra7 aes
  ARM: dts: Configure interconnect target module for am4 aes
  ARM: dts: Configure interconnect target module for am3 aes
  ARM: dts: Configure interconnect target module for dra7 sham
  ARM: dts: Configure interconnect target module for am4 sham
  ARM: dts: Configure interconnect target module for am3 sham
  ARM: dts: Configure interconnect target module for am4 qspi
  ARM: dts: Configure interconnect target module for omap3 sdma
  ARM: dts: Configure interconnect target module for omap2 sdma
  ARM: dts: Add generic compatible for omap sdma instances
  bus: ti-sysc: Fix iterating over clocks
  ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omap
  bus: ti-sysc: Fix missing reset delay handling
  ARM: dts: am437x-gp/epos-evm: fix panel compatible
  ...

Link: https://lore.kernel.org/r/pull-1578420398-290837@atomide.com-3Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.6/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree changes for omaps for v5.6 merge window

Devicetree changes for omaps for v5.6 to configure more
devices and update boards to use generic lcd panels:

- Configure HDMI for dra76-evm and am57xx-idk

- Correct node name for am3517 mdio

- Convert am335x-evm, am335x-evmsk, and am335x-icev2 to use generic
  panels

* tag 'omap-for-v5.6/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-icev2: Add support for OSD9616P0899-10 at i2c0
  ARM: dts: am335x-evmsk: Use drm simple-panel instead of tilcdc-panel
  ARM: dts: am335x-evm: Use drm simple-panel instead of tilcdc-panel
  ARM: dts: omap3: name mdio node properly
  ARM: dts: am57xx-idk-common: add HDMI to the common dtsi
  ARM: dts: dra76-evm: add HDMI output

Link: https://lore.kernel.org/r/pull-1578420398-290837@atomide.com-2Signed-off-by: Olof Johansson <olof@lixom.net>

* mmp/hsic:
  ARM: dts: mmp3: Fix typos

Fixes build failures due to syntax errors.

Fixes: 3240d5b8 ("ARM: dts: mmp3: Add HSIC controllers")
Signed-off-by: Olof Johansson <olof@lixom.net>

* mmp/hsic:
  ARM: dts: mmp3-dell-ariel: Enable the HSIC
  ARM: dts: mmp3: Add HSIC controllers
  dt-bindings: phy: Add binding for marvell,mmp3-hsic-phy
  clk: mmp2: Add HSIC clocks
  dt-bindings: marvell,mmp2: Add clock ids for the HSIC clocks
  + Linux 5.5-rc2

There's a SMSC USB2640 (USB hub & SD controller) connected to it, but
the SD card slot footprint is unpopulated. Also connected to the hub is
a SMSC LAN7500 gigabit ethernet adapter.

Link: https://lore.kernel.org/r/20191220065314.237624-6-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>

There are two on MMP3, along with the PHYs. The PHYs are made compatible
with the NOP transceiver, since there's no driver for the time being and
they're likely configured by the firmware.

Link: https://lore.kernel.org/r/20191220065314.237624-5-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

This is the PHY chip for USB HSIC on MMP3 platform.

Link: https://lore.kernel.org/r/20191220065314.237624-4-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>

There are two USB HSIC controllers on MMP2 and MMP3.

Link: https://lore.kernel.org/r/20191220065314.237624-3-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

There are two USB HSIC controllers on MMP2 and MMP3.

Link: https://lore.kernel.org/r/20191220065314.237624-2-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-bindings-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v5.6

  - Document TMU and CAN(FD) support for R-Car RZ/G2N.

* tag 'renesas-dt-bindings-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: can: rcar_canfd: document r8a774b1 support
  dt-bindings: can: rcar_can: document r8a774b1 support
  dt-bindings: timer: renesas: tmu: Document r8a774b1 bindings

Link: https://lore.kernel.org/r/20200106104857.8361-6-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-dt-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM64 DT updates for v5.6

  - Remove now unused ARCH_R8A7796 config symbol,
  - Rename R-Car H3 and M3-W SoC, and ULCB board DTS files to increase
    naming consistency,
  - Miscellaneous fixes for issues detected by "make dtbs_check",
  - Enhance support for R-Car M3-W+,
  - Display support for the EK874 board,
  - Prepare for split of R-Car H3 ES1.x and ES2.0+ config symbols,
  - Minor fixes and improvements.

* tag 'renesas-arm64-dt-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: dts: renesas: Prepare for split of ARCH_R8A7795 into ARCH_R8A7795[01]
  arm64: dts: renesas: Sort DTBs in Makefile
  arm64: dts: renesas: Drop redundant SoC prefixes from ULCB DTS file names
  arm64: dts: renesas: Rename r8a7795{-es1,}* to r8a7795[01]*
  arm64: dts: renesas: Add EK874 board with idk-2121wr display support
  arm64: dts: renesas: r8a77961: Add SDHI nodes
  arm64: dts: renesas: r8a77961: Add I2C nodes
  arm64: dts: renesas: r8a77961: Add SYS-DMAC nodes
  arm64: dts: renesas: r8a77961: Add RAVB node
  arm64: dts: renesas: r8a77961: Add GPIO nodes
  arm64: dts: renesas: r8a77961: Add RWDT node
  arm64: dts: renesas: r8a77990: ebisu: Remove clkout-lr-synchronous from sound
  arm64: dts: renesas: r8a77970: Group tuples in thermal reg property
  arm64: dts: renesas: Group tuples in pci ranges and dma-ranges properties
  arm64: dts: renesas: Group tuples in interrupt properties
  arm64: dts: renesas: Group tuples in regulator-gpio states properties
  arm64: dts: renesas: Rename r8a7796* to r8a77960*
  arm64: dts: renesas: Remove use of ARCH_R8A7796

Link: https://lore.kernel.org/r/20200106104857.8361-4-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm-dt-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.6

  - Touch screen support for the iwg20d board,
  - ARM global timer support on Cortex-A9 MPCore SoCs,
  - Miscellaneous fixes for issues detected by "make dtbs_check".

* tag 'renesas-arm-dt-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: dts: sh73a0: Add missing clock-frequency for fixed clocks
  ARM: dts: r8a7778: Add missing clock-frequency for fixed clocks
  ARM: dts: rcar-gen2: Add missing mmio-sram bus properties
  ARM: dts: rcar-gen2: Fix PCI high address in interrupt-map-mask
  ARM: dts: renesas: Group tuples in pci ranges and dma-ranges properties
  ARM: dts: renesas: Group tuples in interrupt properties
  ARM: dts: renesas: Group tuples in regulator-gpio states properties
  ARM: dts: r8a7779: Add device node for ARM global timer
  ARM: dts: sh73a0: Add device node for ARM global timer
  ARM: dts: sh73a0: Rename twd clock to periph clock
  ARM: dts: iwg20d-q7-common: Add LCD support

Link: https://lore.kernel.org/r/20200106104857.8361-3-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ux500-armsoc-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt

Support the Samsung GT-I8190/Golden phone:

- Proper include file for the AB8505 PMIC variant.
- Add a DTS file for the GT-I8190/Golden
- Extend the IMU, touch screen, WiFi and Bluetooth
  as separate patches.

* tag 'ux500-armsoc-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: ux500: samsung-golden: Add Bluetooth
  ARM: dts: ux500: samsung-golden: Add WiFi
  ARM: dts: ux500: samsung-golden: Add touch screen
  ARM: dts: ux500: samsung-golden: Add IMU (accelerometer + gyroscope)
  ARM: dts: ux500: Add device tree for Samsung Galaxy S III mini (GT-I8190)
  dt-bindings: arm: ux500: Document samsung,golden compatible
  ARM: dts: ux500: Add device tree include for AB8505
  ARM: dts: ux500: Remove unused ste-href-ab8505.dtsi

Link: https://lore.kernel.org/r/CACRpkdaN2Lv_rBEYNiyAarA81yea6Eky8w_htqZqdRng8S-DcA@mail.gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Add basic DT to support Unisoc's SC9863A, with this patch,
the board sp9863a-1h10 can run into console.

Link: https://lore.kernel.org/r/20191223092948.24824-4-zhang.lyra@gmail.comSigned-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

"clock-frequency" is a required property for devices nodes compatible
with "fixed-clock", leading to warnings when running

    $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/clock/fixed-clock.yaml
    arch/arm/boot/dts/sh73a0-kzm9g.dt.yaml: extcki: 'clock-frequency' is a required property

Fix this by adding the missing "clock-frequency" properties to the various
clocks, to be overridden by the board DTS files when populated.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191213162736.2160-1-geert+renesas@glider.be

"clock-frequency" is a required property for devices nodes compatible
with "fixed-clock", leading to warnings when running

    $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/clock/fixed-clock.yaml
    arch/arm/boot/dts/r8a7778-bockw.dt.yaml: audio_clk_a: 'clock-frequency' is a required property
    arch/arm/boot/dts/r8a7778-bockw.dt.yaml: audio_clk_b: 'clock-frequency' is a required property
    arch/arm/boot/dts/r8a7778-bockw.dt.yaml: audio_clk_c: 'clock-frequency' is a required property

Fix this by adding the missing "clock-frequency" properties to the audio
clocks, to be overridden by board DTS files when populated.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191213162712.2056-1-geert+renesas@glider.be

"#address-cells", "#size-cells", and "ranges" are required properties
for devices nodes compatible with "mmio-sram", leading to warnings when
running "make dtbs_check":

    $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sram/sram.yaml
    arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: sram@e63a0000: '#address-cells' is a required property
    arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: sram@e63a0000: '#size-cells' is a required property
    arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: sram@e63a0000: 'ranges' is a required property
    ...

Fix this by adding the missing properties to the mmio-sram device nodes
in the DTS files for all affected R-Car Gen2 and RZ/G1 SoCs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191213162604.1890-1-geert+renesas@glider.be

"make dtbs_check" emits warnings like:

    pci@ee090000: interrupt-map-mask:0:0: 65280 is greater than the maximum of 63488
    pci@ee0b0000: interrupt-map-mask:0:0: 65280 is greater than the maximum of 63488
    pci@ee0d0000: interrupt-map-mask:0:0: 65280 is greater than the maximum of 63488

According to dt-schemas/schemas/pci/pci-bus.yaml, the PCI high address
cell value in the "interrupt-map-mask" property must lie in the range
0..0xf800.

Fix this by correcting the values from 0xff00 to 0xf800 in all affected
R-Car Gen2 and RZ/G1 DTS files.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191213162459.1731-1-geert+renesas@glider.be

As R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+ (R8A77951) are really
different SoCs, CONFIG_ARCH_R8A7795 will be split in
CONFIG_ARCH_R8A77950 and CONFIG_ARCH_R8A77951.

Relax dependencies by handling both the old and the new symbols.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191217183841.432-5-geert+renesas@glider.be

Sort the entries for the various DTBs in the Makefile by SoC and board
type.  Keep Salvator-X(S) together, and do the same for ULCB with and
without Kingfisher extension.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191217183841.432-4-geert+renesas@glider.be

Unlike the V3MSK and V3HSK boards, the various "ULCB" boards are really
the same boards, with different SiPs fitted, just like the Salvator-X(S)
boards.  Furthermore, the "H3", "M3", and "M3N" prefixes of the "ULCB"
parts in the DTS file names are redundant, as they are implied by the
SoC part numbers, which are also part of the file names.

Hence drop the redundant prefixes, to make the DTS file names consistent
with the file names for the various "Salvator-X(S)" boards.
Suggested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191217183841.432-3-geert+renesas@glider.be

Despite using the same compatible values ("r8a7795"-based) because of
historical reasons, R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+
(R8A77951) are really different SoCs, with different part numbers.

Reflect this in the DTS files by changing their base names from
"r8a7795-es1" and "r8a7795" to "r8a77950" resp. "r8a77951".
Drop all "ES" references next to part numbers, as they are implied by
the part numbers, and thus redundant.

Note that DT binding headers, definitions, and compatible values are
not renamed, to preserve backward compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191217183841.432-2-geert+renesas@glider.be

samsung-golden uses a BCM4334 WiFi+BT combo chip.
The BT part is connected via UART and supported by the hci_bcm
driver in mainline.
Add the necessary device tree changes to make it load correctly.

It requires (seemingly) device-specific firmware that can be
extracted from the stock Android system used on samsung-golden:
  - /system/bin/bcm4334.hcd -> /lib/firmware/brcm/BCM4334B0.hcd

On my device, scanning for other Bluetooth devices works just fine,
but for some reason it keeps disconnecting immediately
when attempting to connect to an other device.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191219202052.19039-9-stephan@gerhold.netSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

samsung-golden uses a BCM4334 WiFi+BT combo chip, connected to SDIO.
It is supported by the brcmfmac driver in mainline,
so we only need to set up the device tree to make it work correctly.

Note: brcmfmac requires (proprietary) firmware + a device-specific
NVRAM file. Both can be extracted from the stock Android system
used on samsung-golden:
  - /system/etc/wifi/bcmdhd_sta.bin_b2   -> /lib/firmware/brcm/brcmfmac4334-sdio.bin
  - /system/etc/wifi/nvram_net.txt_GPIO4 -> /lib/firmware/brcm/brcmfmac4334-sdio.samsung,golden.txt

brcmfmac4334-sdio.bin from linux-firmware also seems to work,
but results in occasional errors for some reason.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191219202052.19039-8-stephan@gerhold.netSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

samsung-golden has an Atmel mXT224S touch controller connected to I2C.
It is supported by the existing driver for atmel,maxtouch, so all we
need to do to make it work is to define the necessary device tree nodes.

The atmel_mxt_ts driver does not support controlling regulators yet,
so add regulator-always-on for now to turn on the necessary regulators.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191219202052.19039-7-stephan@gerhold.netSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

samsung-golden has a InvenSense MPU-6051M IMU that provides an
accelerometer and gyroscope. It seems to be functionally compatible
with MPU-6050 so we can easily enable it by adding the necessary
device tree nodes.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191219202052.19039-6-stephan@gerhold.netSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The Samsung Galaxy S III mini (GT-I8190) is a smartphone with Ux500 SoC
released in 2012. Thanks to the great mainline support for Ux500,
it can actually run mainline Linux quite well.

Add a new device tree for it with support for:
  - Internal Storage (eMMC)
  - External Storage (Micro SD card)
  - UART
  - GPIO Buttons
  - Vibrator

Note that the device tree cannot be booted directly with
the original (Samsung) bootloader. It keeps the L2 cache turned on,
which causes the kernel to hang shortly after decompression.

As a workaround I have created a port of (mainline) U-Boot,
which locks the L2 cache before booting Linux. At the moment it does not
replace the Samsung bootloader, instead we let the original bootloader
load U-Boot as an another (intermediate) bootloader.

Another advantage of this is that U-Boot has proper device tree support,
so we do not need to hardcode the kernel command line in the device tree.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191219202052.19039-5-stephan@gerhold.netSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The Samsung Galaxy S III mini ("samsung-golden") can now boot
mainline Linux; document the samsung,golden compatible that is
used in its device tree.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191219202052.19039-4-stephan@gerhold.netSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

AB8505 is a slightly newer version of AB8500.
Overall it is quite similar, but there are some differences like
the number of GPIOs and regulators. Therefore we need a separate
device tree definition for devices making use of AB8505.

The AB8500-specific nodes were moved out of ste-dbx5x0.dtsi in
commit a46f7c67 ("ARM: dts: ux500: Move ab8500 nodes to ste-ab8500.dtsi").
Add a new "ste-ab8505.dtsi" device tree include in a similar way.

Keep the battery/charging related sub-devices disabled by default
since they require additional configuration to work correctly.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191219202052.19039-3-stephan@gerhold.netSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The pin configuration for HREF boards with AB8505 was added in
commit 77ad9dfc ("ARM: ux500: move last AB8505 set-up to DT").
As the commit message notes, it was unused back then and it has
remained so even today, especially considering AB8505 did not have
proper device tree support until recently.

We are now preparing to add support for some Samsung smartphones
that are using AB8505. However, they use different pin configs
because using ste-href-ab8505.dtsi is known to break UART.
There were not many HREFs with AB8505, so at this point it seems
unlikely that we will ever make use of this include. Remove it.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191219202052.19039-2-stephan@gerhold.netSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The EK874 is advertised as compatible with panel IDK-2121WR from
Advantech, however the panel isn't sold alongside the board.
A new dts, adding everything that's required to get the panel to
to work with the EK874, is the most convenient way to support the
EK874 when it's connected to the IDK-2121WR.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/1576590361-28244-7-git-send-email-fabrizio.castro@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add device nodes for the SDHI Interfaces on the Renesas R-Car M3-W+
(r8a77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191216124740.16647-7-geert+renesas@glider.be

Add device nodes for the I2C and IIC Controllers on the Renesas R-Car
M3-W+ (r8a77961) SoC, including DMA properties linking them to the DMA
controllers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191216124740.16647-6-geert+renesas@glider.be

Add device nodes for the System DMA Controllers (SYS-DMAC) on the
Renesas R-Car M3-W+ (r8a77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191216124740.16647-5-geert+renesas@glider.be

Add a device node for the Ethernet AVB (RAVB) interface on the Renesas
R-Car M3-W+ (r8a77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191216124740.16647-4-geert+renesas@glider.be

Add device nodes for the GPIO controllers on the Renesas R-Car M3-W+
(r8a77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191216124740.16647-3-geert+renesas@glider.be

Add a device node for the RCLK Watchdog Timer (RWDT) on the Renesas
R-Car M3-W+ (r8a77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191216124740.16647-2-geert+renesas@glider.be

rcar_sound doesn't support clkout-lr-synchronous in upstream.
It was supported under out-of-tree rcar_sound.
upstream rcar_sound is supporting
	- clkout-lr-synchronous
	+ clkout-lr-asynchronous
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mubt3tux.wl-kuninori.morimoto.gx@renesas.com
Fixes: 56629fcb ("arm64: dts: renesas: ebisu: Enable Audio")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>