- 10 Sep, 2006 4 commits
-
-
Mauro Carvalho Chehab authored
V4L1 support should be disabled when no CONFIG_VIDEO_V4L1_COMPAT is defined, to allow checking for broken V4L2 ports. This is very important during the migration phase for V4L2 API. However, userspace apps should be capable of using both APIs, since they need to test at runtime, via VIDIOCGCAP ioctl, if V4L1 is supported. So, when __KERNEL__ is not defined, those ioctls and corresponding structs should be visible. This patch also removes the obsolete defines HAVE_V4L1 and HAVE_V4L2, that where causing some confusion, and were replaced by CONFIG_VIDEO_V4L1_COMPAT and CONFIG_VIDEO_V4L2. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Previously, this were reported: Ooops: IR config error [card=139] Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hermann Pitton authored
The tena_9533_di_pal_ranges use 0x04 instead the original 0x08 for the UHF (range 2) switching. This is wrong and therefore nothing happens. Restore tuner_ymec_tvf66t5_b_dff_pal_ranges[] to make the UHF switch working again. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
VIDIOCGMBUF should be compiled only when V4L1 support is selected, since this ioctl is from the obsoleted API. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 08 Sep, 2006 12 commits
-
-
Jack Steiner authored
The sn_cpu_init() is required for cpu initialization on SN platforms. Change __init to __cpuinit so that the function is not freed with init code/data. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Jack Steiner authored
The SN PROM uses the register stack in the slave loop. The contents must be preserved for the OS to return to the slave loop via offlining a cpu or for kexec. A 'flushrs" is needed to force the stack to be written to memory prior to changing bspstore. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Andreas Schwab authored
The syscalls set/get_robust_list must not be wired up until futex_atomic_cmpxchg_inatomic is implemented. Otherwise the kernel will hang in handle_futex_death. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Stephane Eranian authored
Fix a bug in sys_perfmonctl() whereby it was not correctly decrementing the file descriptor reference count. Signed-off-by: stephane eranian <eranian@hpl.hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Trond Myklebust authored
The logic in nfs_direct_read_schedule and nfs_direct_write_schedule can allow data->npages to be one larger than rpages. This causes a page pointer to be written beyond the end of the pagevec in nfs_read_data (or nfs_write_data). Fix this by making nfs_(read|write)_alloc() calculate the size of the pagevec array, and initialise data->npages. Also get rid of the redundant argument to nfs_commit_alloc(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
If a CPU faults this page into pagetables after invalidate_mapping_pages() checked page_mapped(), invalidate_complete_page() will still proceed to remove the page from pagecache. This leaves the page-faulting process with a detached page. If it was MAP_SHARED then file data loss will ensue. Fix that up by checking the page's refcount after taking tree_lock. Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Hugh Dickins <hugh@veritas.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Badari Pulavarty authored
It has been reported that ext3_getblk() is not doing the right thing and triggering following WARN(): BUG: warning at fs/ext3/inode.c:1016/ext3_getblk() <c01c5140> ext3_getblk+0x98/0x2a6 <c03b2806> md_wakeup_thread+0x26/0x2a <c01c536d> ext3_bread+0x1f/0x88 <c01cedf9> ext3_quota_read+0x136/0x1ae <c018b683> v1_read_dqblk+0x61/0xac <c0188f32> dquot_acquire+0xf6/0x107 <c01ceaba> ext3_acquire_dquot+0x46/0x68 <c01897d4> dqget+0x155/0x1e7 <c018a97b> dquot_transfer+0x3e0/0x3e9 <c016fe52> dput+0x23/0x13e <c01c7986> ext3_setattr+0xc3/0x240 <c0120f66> current_fs_time+0x52/0x6a <c017320e> notify_change+0x2bd/0x30d <c0159246> chown_common+0x9c/0xc5 <c02a222c> strncpy_from_user+0x3b/0x68 <c0167fe6> do_path_lookup+0xdf/0x266 <c016841b> __user_walk_fd+0x44/0x5a <c01592b9> sys_chown+0x4a/0x55 <c015a43c> vfs_write+0xe7/0x13c <c01695d4> sys_mkdir+0x1f/0x23 <c0102a97> syscall_call+0x7/0xb Looking at the code, it looks like it's not handle HOLE correctly. It ends up returning -EIO. Here is the patch to fix it. If we really want to be paranoid, we can allow return values 0 (HOLE), 1 (we asked for one block) and return -EIO for more than 1 block. But I really don't see a reason for doing it - all we need is the block# here. (doesn't matter how many blocks are mapped). ext3_get_blocks_handle() returns number of blocks it mapped. It returns 0 in case of HOLE. ext3_getblk() should handle HOLE properly (currently its dumping warning stack and returning -EIO). Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
David Wang authored
New SiS south bridge device ID is 0x966. Next coming product will be 0x968. (Will be released in Q4, this year) We don't make any updates to the IDE controller. Signed-off-by: David Wang <touch@sis.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alexey Dobriyan authored
Not that it passes allmodconfig without it... Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Mark Haverkamp <markh@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alexey Dobriyan authored
Sergey Vlasov reported that his "FUJITSU MCC3064AP, ATAPI OPTICAL drive" pops up as UNKNOWN in /proc/ide/*/media . Closes #4145. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Thomas Gleixner authored
The current implementation of futex_lock_pi returns -ERESTART_RESTARTBLOCK in case that the lock operation has been interrupted by a signal. This results in a return of -EINTR to userspace in case there is an handler for the signal. This is wrong, because userspace expects that the lock function does not return in any case of signal delivery. This was not caught by my insufficient test case, but triggered a nasty userspace problem in an high load application scenario. Unfortunately also glibc does not check for this invalid return value. Using -ERSTARTNOINTR makes sure, that the interrupted syscall is restarted. The restart block related code can be safely removed, as the possible timeout argument is an absolute time value. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Kirill Korotaev authored
This prevents cross-region mappings on IA64 and SPARC which could lead to system crash. They were correctly trapped for normal mmap() calls, but not for the kernel internal calls generated by executable loading. This code just moves the architecture-specific cross-region checks into an arch-specific "arch_mmap_check()" macro, and defines that for the architectures that needed it (ia64, sparc and sparc64). Architectures that don't have any special requirements can just ignore the new cross-region check, since the mmap() code will just notice on its own when the macro isn't defined. Signed-off-by: Pavel Emelianov <xemul@openvz.org> Signed-off-by: Kirill Korotaev <dev@openvz.org> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> [ Cleaned up to not affect architectures that don't need it ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 06 Sep, 2006 11 commits
-
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] myri10ge: update the firmware download URL in Kconfig
-
john stultz authored
Use the generic time stuff for FRV. Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
David Woodhouse authored
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ismail Donmez authored
linux/device.h header is not included in the David Woodhouse's kernel-headers git tree which is used for userspace kernel headers. Which results in compile errors when building iproute2. Attached patch moves linux/device.h include under the #ifdef __KERNEL__ section. Signed-off-by: Ismail Donmez <ismail@pardus.org.tr> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ingo Molnar authored
Remove an unintended console_verbose() side-effect from add_taint(). Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Pavel Machek authored
PAE + swsusp results in hard-to-debug crash about 50% of time during resume. Cause is known, fix needs to be ported from x86-64 (but we can't make it to 2.6.18, and I'd like this to be worked around in 2.6.18). Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Thomas Gleixner authored
Frank v. Waveren pointed out that on 64bit machines the timespec to ktime_t conversion might overflow. This is also true for timeval to ktime_t conversions. This breaks a "sleep inf" on 64bit machines. While a timespec/timeval with tx.sec = MAX_LONG is valid by specification the internal representation of ktime_t is based on nanoseconds. The conversion of seconds to nanoseconds overflows for seconds values >= (MAX_LONG / NSEC_PER_SEC). Check the seconds argument to the conversion and limit it to the maximum time which can be represented by ktime_t. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Frank v Waveren <fvw@var.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Henrik Kretzschmar authored
Adds kernel-doc for alloc_super() type in fs/super.c. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Henrik Kretzschmar authored
Fixes an error message on make xmldocs. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jarek Poplawski authored
With CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_LOCKDEP=y CONFIG_DEBUG_LOCK_ALLOC=y # CONFIG_PROVE_LOCKING is not set spin_unlock_irqrestore() goes through lockdep but spin_lock_irqsave() doesn't. Apparently, bad things happen. Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Brice Goglin authored
Update the firmware download URL in Kconfig to match the header in drivers/net/myri10ge/myri10ge.c. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
- 04 Sep, 2006 2 commits
-
-
Linus Torvalds authored
-
Benjamin Herrenschmidt authored
New sparse caught that typo which could have caused erratic hardware behaviour on some machines if the platform functions are used by the firmware to change bits in some FCR registers. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 02 Sep, 2006 4 commits
-
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] 8250: constify some serial structs [SERIAL] Make uart_match_port() work with all memory mapped UARTs
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3762/1: Fix ptrace cache coherency bug for ARM1136 VIPT nonaliasing Harvard caches [ARM] 3765/1: S3C24XX: cleanup include/asm-arm/arch-s3c2410/dma.h [ARM] 3764/1: S3C24XX: change type naming to kernel style [ARM] 3763/1: add both rtcs to csb337 defconfig [ARM] Fix ARM __raw_read_trylock() implementation [ARM] 3750/3: Fix double VFP emulation for EABI kernels
-
Oleg Nesterov authored
It is not possible to find a sub-thread in ->children/->ptrace_children lists, ptrace_attach() does not allow to attach to sub-threads. Even if it was possible to ptrace the task from the same thread group, we can't allow to release ->group_leader while there are others (ptracer) threads in the same group. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
George G. Davis authored
Patch from George G. Davis Resolve ARM1136 VIPT non-aliasing cache coherency issues observed when using ptrace to set breakpoints and cleanup copy_{to,from}_user_page() while we're here as requested by Russell King because "it's also far too heavy on non-v6 CPUs". NOTES: 1. Only access_process_vm() calls copy_{to,from}_user_page(). 2. access_process_vm() calls get_user_pages() to pin down the "page". 3. get_user_pages() calls flush_dcache_page(page) which ensures cache coherency between kernel and userspace mappings of "page". However flush_dcache_page(page) may not invalidate I-Cache over this range for all cases, specifically, I-Cache is not invalidated for the VIPT non-aliasing case. So memory is consistent between kernel and user space mappings of "page" but I-Cache may still be hot over this range. IOW, we don't have to worry about flush_cache_page() before memcpy(). 4. Now, for the copy_to_user_page() case, after memcpy(), we must flush the caches so memory is consistent with kernel cache entries and invalidate the I-Cache if this mm region is executable. We don't need to do anything after memcpy() for the copy_from_user_page() case since kernel cache entries will be invalidated via the same process above if we access "page" again. The flush_ptrace_access() function (borrowed from SPARC64 implementation) is added to handle cache flushing after memcpy() for the copy_to_user_page() case. Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 01 Sep, 2006 7 commits
-
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: uhci-hcd: fix list access bug USB: Support for ELECOM LD-USB20 in pegasus USB: Add VIA quirk fixup for VT8235 usb2 USB: rtl8150_disconnect() needs tasklet_kill() USB Storage: unusual_devs.h for Sony Ericsson M600i USB Storage: Remove the finecam3 unusual_devs entry UHCI: don't stop at an Iso error usb gadget: g_ether spinlock recursion fix USB: add all wacom device to hid-core.c blacklist hid-core.c: Adds all GTCO CalComp Digitizers and InterWrite School Products to blacklist USB floppy drive SAMSUNG SFD-321U/EP detected 8 times
-
Benjamin Herrenschmidt authored
Fix some more problems (inverted use of semaphores in some places). He also moved my checks into within the protected section which is better. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Badari Pulavarty authored
Missed a place where I forgot to convert kfree() to kmem_cache_free() as part of jbd-manage-its-own-slab changes. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Nishanth Aravamudan authored
Since vma->vm_pgoff is in units of smallpages, VMAs for huge pages have the lower HPAGE_SHIFT - PAGE_SHIFT bits always cleared, which results in badd offsets to the interleave functions. Take this difference from small pages into account when calculating the offset. This does add a 0-bit shift into the small-page path (via alloc_page_vma()), but I think that is negligible. Also add a BUG_ON to prevent the offset from growing due to a negative right-shift, which probably shouldn't be allowed anyways. Tested on an 8-memory node ppc64 NUMA box and got the interleaving I expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Andi Kleen <ak@muc.de> Acked-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
John Keller authored
Fix some bugs in the patch that converted the IOC4 driver from port IO ops to memio ops. http://marc.theaimsgroup.com/?l=linux-ide&m=114895892231438&w=2 Problems fixed are: - Call to default_hwif_mmiops() was not being done until _after_ first IO operation, resulting in the first IO operation being done as a port IO op, instead of memio. - request_region() calls needed to be request_mem_region() - Incomplete error case handling. - Non-usage of ioremap() and __iomem. Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Jeremy Higdon <jeremy@sgi.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Takashi Iwai authored
Revert the mixer element names of some Mic controls to the state of 2.6.17. This should fix the name mismatch in alsactl. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Benjamin Herrenschmidt authored
The port to genirq & the new powerpc interrupt model in 2.6.18 introduced a bug in the legacy PowerMac PIC code (used on older machines) because of a typo potentially causing hangs due to interrupt storms. This fixes it, along with a performance issue causing us to do spurrious retriggers after masking an interrupt. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-