- 08 Nov, 2016 40 commits
-
-
Hannes Reinecke authored
Occasionally it might happen that we receive a PRLI while we're still waiting for our PLOGI response. In that case we should return 'busy' LS status instead of 'plogi required' LS status. Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
PRLI is only required if the port is acting as an initiator; ports which support target functionality only do not need to send PRLI. At the same time the PRLI state is only used if the port initiated a PRLI transfer; if we received a PRLI request we should _not_ change the state as this would cause our PRLI response to be dropped. And when we receive a PRLI response we need to check if an image pair has been established; if not the remote port cannot act as a target for us and we need to disable target functionality. Signed-off-by:
Johannes Thumshirn <jth@kernel.org> Signed-off-by:
-
Hannes Reinecke authored
The libfc stack generates an RTV request, so we should be implementing an RTV responder, too. Signed-off-by:
-
Hannes Reinecke authored
We only ever use the 'fp' argument for fc_rport_error() to encapsulate the error code, so we can as well do away with that and pass the error directly. Signed-off-by:
-
Hannes Reinecke authored
When a command is aborted it might already have the DID_TIME_OUT status set, so we shouldn't be overwriting that. Signed-off-by:
-
Hannes Reinecke authored
The user might want to modify the values for R_A_TOV and E_D_TOV, so add new module parameters 'e_d_tov' and 'r_a_tov' for the 'fcoe' modules and allow to modify them via sysfs attributes. Signed-off-by:
-
Hannes Reinecke authored
When setting the FCP timeout we need to ensure a lower boundary for E_D_TOV and R_A_TOV, otherwise we'd be getting spurious I/O issues due to the fcp timer firing too early. Signed-off-by:
-
Hannes Reinecke authored
If fc_rport_error_retry() is attempting to retry the remote port state we should be waiting for the configured e_d_tov value rather than the default. Signed-off-by:
-
Hannes Reinecke authored
We should be using the configured R_A_TOV value when sending the exchange. Signed-off-by:
-
Hannes Reinecke authored
If a command times out libfc is sending an REC, which also might fail (due to frames being lost or something). If no data has been transferred we can simply retry the command, but the current code sets a state of FC_ERROR, which then is being translated into DID_ERROR, resulting in an I/O error. So to handle this properly we need to set a separate state FC_TRANS_RESET and mapping it onto DID_SOFT_RETRY. Signed-off-by:
Hannes Reinecke <hare@suse.de> Acked-by:
-
Hannes Reinecke authored
Signed-off-by:
-
Martin K. Petersen authored
This reverts commit 3e22760d. This revert came about because of efforts by Ewan Milne, Curtis Taylor and I. In researching this issue, significant performance issues were seen on large CPU count systems using the software FCOE stack. Hannes also weighed in. The same was not apparent on much smaller low count CPU systems. The behavior introduced by commit 3e22760d lands sup with large count CPU systems seeing continual blk_requeue_request() calls due to ML_QUEUE_HOST_BUSY. fc_exch_alloc() used to try all the available exchange managers in the list for an available exchange id, but this was changed in 2010 so that if the first matched exchange manager couldn't allocate one, it fails and we end up returning host busy. This was due to commit: Setting the ddp_min module parameter to fcoe to 128MB prevents the ->match function from permitting the use of the offload exchange manager for the frame, and we no longer see the problem with host busy status, since it uses the larger non-offloaded pool. Reverting commit 3e22760d was tested to also prevent the host busy issue due to failing allocations. Suggested-by:
Ewan Milne <emilne@redhat.com> Suggested-by:
Curtis Taylor <cjt@us.ibm.com> Tested-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
James Smart authored
lpfc version changed to 11.2.0.2 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
-
James Smart authored
Fix fw download on SLI-4 FC adapters Driver performs a quick validation of magic numbers in the fw download image. Driver needed to be updated for more recent magic numbers. Signed-off-by:
-
James Smart authored
Synchronize link speed with boot driver Link speed settings set by the boot driver are reported by the hw. Driver will attempt to read them, and if set, will respect their values. The driver can override the settings with its own if instructed by user space (via bsg), with the new values being picked up by the boot driver. Signed-off-by:
-
James Smart authored
Correct panics with eh_timeout and eh_deadline We were having double completions on our SLI-3 version of adapters. Solved by clearing our command pointer before calling scsi_done. The eh paths potentially ran simulatenously and would see the non-null value and invoke scsi_done again. Signed-off-by:
-
James Smart authored
Fix lost target in pt-to-pt connect Change reject code to something that allows a retry Signed-off-by:
-
James Smart authored
Revise strings with full lpfc parameter name Signed-off-by:
-
James Smart authored
Code cleanup for lpfc_sriov_nr_virtfn parameter Signed-off-by:
-
James Smart authored
Code cleanup for lpfc_max_scsicmpl_time parameter Signed-off-by:
-
James Smart authored
Code cleanup for lpfc_topology parameter Signed-off-by:
-
James Smart authored
Code cleanup for lpfc_aer_support parameter Signed-off-by:
-
James Smart authored
Code cleanup for lpfc_enable_rrq parameter Signed-off-by:
-
James Smart authored
Code clean up for lpfc_iocb_cnt parameter Signed-off-by:
-
James Smart authored
Make lpfc_prot_mask and lpfc_prot_guard per hba parameters Signed-off-by:
-
James Smart authored
Set driver environment data on adapter Signed-off-by:
-
James Smart authored
Fix sg_reset on SCSI device causing kernel crash Driver could reference stale node pointers in task mgmt call. Changed to use resetting cmd and look up node pointer in task mgmt function. Signed-off-by:
-
James Smart authored
Correct embedded io wq element size. Embedded element sizes are 128 byte elements Signed-off-by:
-
Milan P. Gandhi authored
This patch does a cleanup and fixes few small typos in lpfc_scsi.c Signed-off-by:
Milan P. Gandhi <mgandhi@redhat.com> Signed-off-by:
James Smart <james.smart@avagotech.com> Reviewed-by:
-
Joao Pinto authored
I am going to leave Synopsys and so this patch changes the Maintainer for UFS Synopsys' specific drivers to my colleagues Manjunath and Prabu. Signed-off-by:
Joao Pinto <jpinto@synopsys.com> Signed-off-by:
-
Javier Martinez Canillas authored
It appears that the mailing list email address doesn't exist anymore: <iss_storagedev@hp.com>: host smtp.hp.com[15.73.96.116] said: 550 5.1.1 <iss_storagedev@hp.com>: Recipient address rejected: User unknown in virtual alias table (in reply to RCPT TO command) Signed-off-by:Javier Martinez Canillas <javier@osg.samsung.com> Acked-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Javier Martinez Canillas authored
It's not necessary to cast the result of kmalloc, since void pointers are promoted to any other type. This also fixes following coccinelle warning: casting value returned by memory allocation function to (BIG_IOCTL_Command_struct *) is useless. Signed-off-by:
-
Christoph Hellwig authored
Having an I/O priority does not mean we should send all requests as HEAD OF QUEUE tags. Reported-by:
Adam Manzanares <adam.manzanares@wdc.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Finn Thain authored
If a NCR5380 host instance ends up on a shared interrupt line then this printk will be a problem. It is already a problem on some Mac models: when testing mac_scsi on a PowerBook 180 I found that PDMA transfers (but not PIO transfers) cause the message to be logged. These spurious interrupts don't appear to come from the DRQ signal from the 5380. And they don't happen at all on the Mac LC III. A comment in the NetBSD source code mentions this mystery. Testing seems to show that we can safely ignore these interrupts. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Reviewed-by:
Ondrej Zary <linux@rainbow-software.org> Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
-
Finn Thain authored
Apply prototypes to get consistent function signatures for the DMA functions implemented in the board-specific drivers. To avoid using macros to alter actual parameters, some of those functions are reworked slightly. This is a step toward the goal of passing the board-specific routines to the core driver using an ops struct (as in a platform driver or library module). This also helps fix some inconsistent types: where the core driver uses ints (cmd->SCp.this_residual and hostdata->dma_len) for keeping track of transfers, certain board-specific routines used unsigned long. While we are fixing these function signatures, pass the hostdata pointer to DMA routines instead of a Scsi_Host pointer, for shorter and faster code. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Finn Thain authored
Avoid the call to NCR5380_poll_politely2() when possible. The call is easily short-circuited on the PIO fast path, using the inline wrapper. This requires that the NCR5380_read macro be made available before any #include "NCR5380.h" so a few declarations have to be moved too. Signed-off-by:
-
Finn Thain authored
Pass a NCR5380_hostdata struct pointer to the board-specific routines instead of a Scsi_Host struct pointer. This reduces pointer chasing in the PIO and PDMA fast paths. The old way was a mistake because it is slow and the board-specific code is not concerned with the mid-layer. Signed-off-by:
-
Finn Thain authored
For timeout values adopt unsigned long, which is the type of jiffies etc. For chip register values and bit masks pass u8, which is the return type of readb, inb etc. For device register offsets adopt unsigned int, as it is suitable for adding to base addresses. Pass the NCR5380_hostdata pointer to the board-specific routines instead of the Scsi_Host pointer. The board-specific code is concerned with hardware and not with SCSI protocol or the mid-layer. Signed-off-by:
-
Finn Thain authored
The various 5380 drivers inconsistently store register pointers either in the Scsi_Host struct "legacy crap" area or in special, board-specific members of the NCR5380_hostdata struct. Uniform use of the latter struct makes for simpler and faster code (see the following patches) and helps to reduce use of the NCR5380_implementation_fields macro. Signed-off-by:
-
Finn Thain authored
Re-order struct members so that hot data lies at the beginning of the struct and cold data at the end. Improve the comments while we're here. Signed-off-by:
-
