- 02 Jun, 2004 6 commits
-
-
David Brownell authored
This patch stops changing the reported fault mode in cases where retries of GET_DESCRIPTOR fail because the device just doesn't have such a descriptor. Plus, it stops printing messages when retrying. It also reduces the number of retries; the first retry seems to resolve most of these firmware problems. Signed-Off-By: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
David Brownell authored
This fixes a problem that all pxa2xx_udc g_ether devices would run into. They'd give the wrong descriptors, like: > --------msg1- usbview ---------- > Device Descriptor: bcdUSB: 0x0200 > bDeviceClass: 0xFF > bDeviceSubClass: 0x00 > bDeviceProtocol: 0x00 > bMaxPacketSize0: 0x10 (16) Windows doesn't like RNDIS-supporting devices to point out that they're really vendor-specific. So this patch makes sure they don't. Signed-off-by: David Brownell <dbrownelL@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
Vojtech Pavlik authored
usb: Based on a 2.4 patch from John_Hull@Dell.com, this patch serializes usb storage and usbfs operation, so that usbfs cannot disturb storage by seemingly harmless control reads. Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
Joël Bourquard authored
This patch adds support in unusual_devs.h for the ISD-300 USB controller used in CD-ROM enclosures. With it, since 2.6.0 it allowed me to move gigabytes of data and worked without a hitch. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
Alan Stern authored
Greg: This patch fixes a bug in disconnect handling for the dummy_hcd driver. After a disconnect the driver would still accept URBs for endpoint 0, leading to an oops. It also improves the ad-hoc technique used by the driver to track its gadget's struct usb_device and fixes the way port-power changes are handled. Please apply. Alan Stern Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
Alan Stern authored
On Mon, 3 May 2004, zcat wrote: > I am trying to get my camera going as a webcam (concord EyeQ Duo in PC > mode, not HDD mode) with the 2.6.4 kernel using the se401 driver > (compiled in).. It logged the following message, which doesn't mean much > to me so I have no idea if it's useful information or not; > > May 3 21:08:11 mrsnorris kernel: usb 1-1: new full speed USB device > using address 2 > May 3 21:08:16 mrsnorris kernel: usb 1-1: control timeout on ep0out > May 3 21:08:16 mrsnorris kernel: usb-storage: This device > (0595,4343,0100 S 00 P 00) has an unneeded Protocol entry in unusual_devs.h > May 3 21:08:16 mrsnorris kernel: Please send a copy of this message > to <linux-usb-devel@lists.sourceforge.net> This fixes the "unneeded Protocol entry" message. We never solved the control timeout problem. Alan Stern Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
-
- 31 May, 2004 12 commits
-
-
bk://gkernel.bkbits.net/net-drivers-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Matthew Wilcox authored
This patch improves some of the handling of PA-RISC tulip cards. - Introduce HAS_SWAPPED_SEEPROM and NEEDS_FAKE_MEDIA_TABLE - Only trigger this code on GSC machines. The pure PCI machines don't have these cards. - Allow the chip_name to be overridden in tulip_init_one(). - Fix some indentation. - Handle the output from tulip_read_eeprom() better.
-
Krzysztof Halasa authored
> From: Ralf Baechle <ralf@linux-mips.org> > Subject: [PATCH] Stop queue on close in hdlcdrv > To: Jeff Garzik <garzik@gtf.org> > Date: Tue, 4 May 2004 13:59:15 +0200 > > The stop method of a driver should ensure queueing is stopped ... > > diff -u -r1.19 hdlcdrv.c > --- suckage/drivers/net/hamradio/hdlcdrv.c 12 Apr 2004 20:23:32 -0000 the above means the following is needed for my drivers - please apply to 2.6:
-
Christoph Hellwig authored
i386 gets it implicitly from somewhere but some architectures don't. Also move <asm/uaccess.h> down so we have asm after linux headers.
-
Andrew Morton authored
s2io_rem_nic() is marked __exit and is being referred to from .data. Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Andrew Morton authored
From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br> drivers/net/ixgb/ixgb_main.c: In function `ixgb_intr': drivers/net/ixgb/ixgb_main.c:1593: warning: unused variable `hw' (catch by J. Cherry). This happens because `hw' is only used when CONFIG_IXGB_NAPI is not set. As `hw' is used only to have the code readable, we can use it for !CONFIG_IXGB_NAPI too. Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Jeff Garzik authored
into redhat.com:/spare/repo/net-drivers-2.6
-
bk://kernel.bkbits.net/davem/sparc-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
David S. Miller authored
-
bk://kernel.bkbits.net/davem/bluetooth-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
David S. Miller authored
into nuts.davemloft.net:/disk1/BK/sparc-2.6
-
http://linux-mh.bkbits.net/bluetooth-2.6David S. Miller authored
into kernel.bkbits.net:/home/davem/bluetooth-2.6
-
- 01 Jun, 2004 6 commits
-
-
Marcel Holtmann authored
Some RTX Telecom based USB dongles offer SCO support, but their implementation is broken. This patch disables the use of the ISOC interface for these devices.
-
Marcel Holtmann authored
If no channel is specified for a RFCOMM server socket, it will search for the next free one and automaticly bind to it. Proposed by Stephen Crane <steve.crane@rococosoft.com>
-
Marcel Holtmann authored
If no PSM is specified for a L2CAP server socket, it will search for the next free one and automaticly bind to it. Proposed by Stephen Crane <steve.crane@rococosoft.com>
-
Marcel Holtmann authored
This patch allocates the next free protocol number for the upcoming HIDP support.
-
Marcel Holtmann authored
This patch updates the address of the BlueZ project and changes some wording of the help entries.
-
Marcel Holtmann authored
Since we are using Bitkeeper the CVS tags are useless. This patch removes them and makes some whitespace cleanups.
-
- 31 May, 2004 16 commits
-
-
Marcel Holtmann authored
With Linux 2.6 there is no need to keep the function exports in a central file and thus the use of syms.c makes no real sense. Remove it and add the EXPORT_SYMBOL calls to the functions they belong to.
-
bk://bk.arm.linux.org.uk/linux-2.6-pcmciaLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Russell King authored
The timing calculations used by the PXA platforms did not always take account of the timings handed to us by PCMCIA, and where it did, it assumed IO timings for memory windows. We fix this, and provide a generic function which calculates the required timings (in nanoseconds) for IO, memory and attribute windows. The SOC drivers only have to convert this information to whatever format the hardware requires to achieve at least these timing parameters.
-
bk://bk.arm.linux.org.uk/linux-2.6-rmkLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Russell King authored
-
Russell King authored
Some machines decided to initialise this element. It's not necessary since find_memend_and_nodes() initialises this itself. However, 'end' is not required if we initialise high_memory in this function rather than waiting until mem_init() is called.
-
David S. Miller authored
-
Andrew Morton authored
From: Eugene Surovegin <ebs@ebshome.net> Put back DECLARE_PCI_UNMAP_??? and friends accidentaly removed during DMA API reorganization. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
David S. Miller authored
into kernel.bkbits.net:/home/davem/sparc-2.6
-
David S. Miller authored
-
Linus Torvalds authored
explcitly. sparse doesn't set any arch defines itself.
-
Peter Osterlund authored
Assigning '*wdata' with a dynamic initializer creates a temporary structure copy on the stack, and then the final data is initialized with a "memcpy()". As a result, these NFS functions use more than 800 bytes of stack-space. Changing the code to just do a memset followed by explicit initialization of the non-zero member variables takes the stack usage down to 36 bytes. Here is a patch that does exactly that.
-
David S. Miller authored
-
David S. Miller authored
-
David S. Miller authored
-
Linus Torvalds authored
Removed one (harmless) direct user pointer access.
-