- 23 Mar, 2011 40 commits
-
-
Balaji T K authored
In Blaze and Panda, 32KHz clock - CLK32KG to WLAN is supplied from Phoenix TWL6030. Add CLK32KG platform data to blaze and omap4panda board file. Signed-off-by:
Balaji T K <balajitk@ti.com> Acked-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Balaji T K authored
In OMAP4 Blaze and Panda, 32KHz clock to WLAN is supplied from Phoenix TWL6030. The 32KHz clock state (ON/OFF) is configured in CLK32KG_CFG_[GRP, TRANS, STATE] register. This follows the same register programming model as other regulators in TWL6030. So add CLK32KG as pseudo regulator. Signed-off-by:
-
Arun Murthy authored
AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage Signed-off-by:
Arun Murthy <arun.murthy@stericsson.com> Acked-by:
Linus Walleij <linus.walleij@stericsson.com> Acked-by:
Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by:
-
Vasiliy Kulikov authored
Don't allow everybody to interact with hardware registers. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Acked-by:
-
Vasiliy Kulikov authored
Don't allow everybody to interact with hardware registers. Signed-off-by:
-
Vasiliy Kulikov authored
Don't allow everybody to change device hardware registers. Signed-off-by:
-
Mattias Nilsson authored
This adds a pretty straight-forward system control driver for the AB8500. This driver will be used from the core platform, e.g the clock tree implementation in the machine code, and is by nature singleton. There are a few simple functions to read, write, set and clear registers so that the machine code can control its own foundation. Cc: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by:
Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Mark Brown authored
The WM831x interrupt controller provides reporting of the touchscreen related interrupts in the primary interrupt status register as a performance optimisation - use this to avoid reading the secondary status registers for those interrupts. For code simplicity and to avoid iterating over all interrupts we open code for the two affected interrupt sources. Signed-off-by:
-
Mark Brown authored
There is a move to deprecate bus-specific PM operations and move to using dev_pm_ops instead in order to reduce the amount of boilerplate code in buses and facilitiate updates to the PM core. Do this move for the WM831x SPI driver. Signed-off-by:
-
Vincent Palatin authored
When using a fixed voltage regulator triggered by a TPS6586x GPIO, this allows to declare and initialize it conveniently from the "subdev" list. Signed-off-by:
Vincent Palatin <vpalatin@chromium.org> Signed-off-by:
-
Jochen Friedrich authored
Add BTN_TOUCH event reporting to ucb1x00_ts touchscreen driver. This will make this touchscreen driver behave consistently wrt. BTN_TOUCH. Signed-off-by:
Jochen Friedrich <jochen@scram.de> Acked-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Wolfram Sang authored
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Mark Brown authored
Provide platform data allowing the system to set the /IRQ pin into CMOS mode rather than the default open drain. The default value of this platform data reflects the default hardware configuration so there should be no change to existing users. Signed-off-by:
-
Mark Brown authored
There is a move to deprecate bus-specific PM operations and move to using dev_pm_ops instead in order to reduce the amount of boilerplate code in buses and facilitiate updates to the PM core. Do this move for the pcf50633 driver. Signed-off-by:
-
Mark Brown authored
No need to have them in the global namespace and sparse complains. Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Mark Brown authored
There is a move to deprecate bus-specific PM operations and move to using dev_pm_ops instead in order to reduce the amount of boilerplate code in buses and facilitiate updates to the PM core. Do this move for the adp5520 driver. Signed-off-by:
-
Mark Brown authored
The WM831x touchscreen interrupts need acknowledgement even when using direct signals to the CPU (which don't go through the core) so leave the acknowledgement up to the touchscreen driver for simplicity. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_txLinus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (66 commits) avr32: at32ap700x: fix typo in DMA master configuration dmaengine/dmatest: Pass timeout via module params dma: let IMX_DMA depend on IMX_HAVE_DMA_V1 instead of an explicit list of SoCs fsldma: make halt behave nicely on all supported controllers fsldma: reduce locking during descriptor cleanup fsldma: support async_tx dependencies and automatic unmapping fsldma: fix controller lockups fsldma: minor codingstyle and consistency fixes fsldma: improve link descriptor debugging fsldma: use channel name in printk output fsldma: move related helper functions near each other dmatest: fix automatic buffer unmap type drivers, pch_dma: Fix warning when CONFIG_PM=n. dmaengine/dw_dmac fix: use readl & writel instead of __raw_readl & __raw_writel avr32: at32ap700x: Specify DMA Flow Controller, Src and Dst msize dw_dmac: Setting Default Burst length for transfers as 16. dw_dmac: Allow src/dst msize & flow controller to be configured at runtime dw_dmac: Changing type of src_master and dest_master to u8. dw_dmac: Pass Channel Priority from platform_data dw_dmac: Pass Channel Allocation Order from platform_data ...
-
Jean Delvare authored
I'm not sure why the read-only data section is excluded from the report, it seems as relevant as the other data sections (b and d). I've stripped the symbols starting with __mod_ as they can have their names dynamically generated and thus comparison between binaries is not possible. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Andi Kleen <andi@firstfloor.org> Acked-by:
Nathan Lynch <ntl@pobox.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jim Keniston authored
Instead of always creating a huge (268K) deflate_workspace with the maximum compression parameters (windowBits=15, memLevel=8), allow the caller to obtain a smaller workspace by specifying smaller parameter values. For example, when capturing oops and panic reports to a medium with limited capacity, such as NVRAM, compression may be the only way to capture the whole report. In this case, a small workspace (24K works fine) is a win, whether you allocate the workspace when you need it (i.e., during an oops or panic) or at boot time. I've verified that this patch works with all accepted values of windowBits (positive and negative), memLevel, and compression level. Signed-off-by:
Jim Keniston <jkenisto@us.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Miller <davem@davemloft.net> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by:
-
Andrey Vagin authored
d_alloc_name return NULL in case error, but we expect errno in devpts_pty_new. Addresses http://bugzilla.openvz.org/show_bug.cgi?id=1758Signed-off-by:
Andrey Vagin <avagin@openvz.org> Signed-off-by:
-
Roland Dreier authored
The test program below will hang because io_getevents() uses add_wait_queue_exclusive(), which means the wake_up() in io_destroy() only wakes up one of the threads. Fix this by using wake_up_all() in the aio code paths where we want to make sure no one gets stuck. // t.c -- compile with gcc -lpthread -laio t.c #include <libaio.h> #include <pthread.h> #include <stdio.h> #include <unistd.h> static const int nthr = 2; void *getev(void *ctx) { struct io_event ev; io_getevents(ctx, 1, 1, &ev, NULL); printf("io_getevents returned\n"); return NULL; } int main(int argc, char *argv[]) { io_context_t ctx = 0; pthread_t thread[nthr]; int i; io_setup(1024, &ctx); for (i = 0; i < nthr; ++i) pthread_create(&thread[i], NULL, getev, ctx); sleep(1); io_destroy(ctx); for (i = 0; i < nthr; ++i) pthread_join(thread[i], NULL); return 0; } Signed-off-by:Roland Dreier <roland@purestorage.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
-
Alexander Gordeev authored
Remove code enabled only when CONFIG_PREEMPT_RT is turned on because it is not used in the vanilla kernel. Signed-off-by:
Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: john stultz <johnstul@us.ibm.com> Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by:
-
Stuart Swales authored
ADFS (FileCore) storage complies with the RISC OS filetype specification (12 bits of file type information is stored in the file load address, rather than using a file extension). The existing driver largely ignores this information and does not present it to the end user. It is desirable that stored filetypes be made visible to the end user to facilitate a precise copy of data and metadata from a hard disc (or image thereof) into a RISC OS emulator (such as RPCEmu) or to a network share which can be accessed by real Acorn systems. This patch implements a per-mount filetype suffix option (use -o ftsuffix=1) to present any filetype as a ,xyz hexadecimal suffix on each file. This type suffix is compatible with that used by RISC OS systems that access network servers using NFS client software and by RPCemu's host filing system. Signed-off-by:
Stuart Swales <stuart.swales.croftnuisk@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Stuart Swales authored
ADFS (FileCore) storage complies with the RISC OS timestamp specification (40-bit centiseconds since 01 Jan 1900 00:00:00). It is desirable that stored timestamp precision be maintained to facilitate a precise copy of data and metadata from a hard disc (or image thereof) into a RISC OS emulator (such as RPCEmu). This patch implements a full-precision conversion from ADFS to Unix timestamp as the existing driver, for ease of calculation with old 32-bit compilers, uses the common trick of shifting the 40-bits representing centiseconds around into 32-bits representing seconds thereby losing precision. Signed-off-by: Stuart Swales<stuart.swales.croftnuisk@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Stuart Swales authored
Kernel crashes in fs/adfs module when accessing directories with a large number of objects on mounted Acorn ADFS E+/F+ format discs (or images) as the existing code writes off the end of the fixed array of struct buffer_head pointers. Additionally, each directory access that didn't crash would leak a buffer as nr_buffers was not adjusted correctly for E+/F+ discs (was always left as one less than required). The patch fixes this by allocating a dynamically-sized set of struct buffer_head pointers if necessary for the E+/F+ case (many directories still do in fact fit in 2048 bytes) and sets the correct nr_buffers so that all buffers are released. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=26072 Tested by tar'ing the contents of my RISC PC's E+ format 20Gb HDD which contains a number of large directories that previously crashed the kernel. Signed-off-by:
-
Chen Gong authored
page-types.c doesn't supply a way to specify the debugfs path and the original debugfs path is not usual on most machines. This patch supplies a way to auto mount debugfs if needed. This patch is heavily inspired by tools/perf/utils/debugfs.c [akpm@linux-foundation.org: make functions static] [akpm@linux-foundation.org: fix debugfs_mount() signature] Signed-off-by:
Chen Gong <gong.chen@linux.intel.com> Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Christian Kujau authored
I noticed the 'mcelog' program had no comment and then ended up "fixing" a few more things: * reiserfsck -V does not print "reiserfsprogs" (any more?) * is "udevinfo" still shipped? udevd certainly is * grub2 doesn't have a 'grub' binary * add a "# how to get the mcelog version" comment Signed-off-by:
Christian Kujau <lists@nerdbynature.de> Signed-off-by:
-
Harry Wei authored
There is a missing case for "Chapter 3: Placing Braces and Spaces". We often know we should not use braces where a single statement. The first case is: if (condition) action(); Another case is: if (condition) do_this(); else do_that(); However, I can not find a description of the second case. Signed-off-by:
Harry Wei <harryxiyou@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Rakib Mullick authored
When CONFIG_SYSCTL=n, we get the following warning: fs/coda/sysctl.c:18: warning: `coda_tabl' defined but not used Fix the warning by making sure coda_table and it's callee function are in the same context. Also clean up the code by removing extra #ifdef. [akpm@linux-foundation.org: remove unneeded stub macros] Signed-off-by:
Rakib Mullick <rakib.mullick@gmail.com> Cc: Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by:
-
David Rientjes authored
Not all 64-bit systems require ISA-style DMA, so allow it to be configurable. x86 utilizes the generic ISA DMA allocator from kernel/dma.c, so require it only when CONFIG_ISA_DMA_API is enabled. Disabling CONFIG_ISA_DMA_API is dependent on x86_64 since those machines do not have ISA slots and benefit the most from disabling the option (and on CONFIG_EXPERT as required by H. Peter Anvin). When disabled, this also avoids declaring claim_dma_lock(), release_dma_lock(), request_dma(), and free_dma() since those interfaces will no longer be provided. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
David Rientjes authored
The generic floppy disk driver utilizies the interface provided by CONFIG_ISA_DMA_API, specifically claim_dma_lock(), release_dma_lock(), request_dma(), and free_dma(). Thus, there's a strict dependency on the config option and the driver should only be loaded if the kernel supports ISA-style DMA. Signed-off-by:
-
David Rientjes authored
8237A utilizes the interface provided by CONFIG_ISA_DMA_API, specifically claim_dma_lock() and release_dma_lock(). Thus, there's a strict dependency on the config option and the module should only be loaded if the kernel supports ISA-style DMA. Signed-off-by:
-
David Rientjes authored
IORESOURCE_DMA cannot be assigned without utilizing the interface provided by CONFIG_ISA_DMA_API, specifically request_dma() and free_dma(). Thus, there's a strict dependency on the config option and limits IORESOURCE_DMA only to architectures that support ISA-style DMA. ia64 is not one of those architectures, so pnp_check_dma() no longer needs to be special-cased for that architecture. pnp_assign_resources() will now return -EINVAL if IORESOURCE_DMA is attempted on such a kernel. Signed-off-by:
-
Andrew Chew authored
This is a platform driver that supports the built-in real-time clock on Tegra SOCs. Signed-off-by:
Andrew Chew <achew@nvidia.com> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Acked-by:
Wan ZongShun <mcuos.com@gmail.com> Acked-by:
Jon Mayo <jmayo@nvidia.com> Signed-off-by:
-
Vasiliy Kulikov authored
Don't allow everybogy to write to NVRAM. Signed-off-by:
-
Ryan Mallon authored
Add alarm/wakeup support to rtc isl1208 driver Signed-off-by:
Ryan Mallon <ryan@bluewatersys.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Mark Brown authored
There is a general move to replace bus-specific PM ops with dev_pm_ops in order to facilitate core improvements. Do this conversion for DS1374. Signed-off-by:
-
Davidlohr Bueso authored
In do_mounts_rd() if memory cannot be allocated, return -ENOMEM. Signed-off-by:
Davidlohr Bueso <dave@gnu.org> Signed-off-by:
-
David Daney authored
With GCC-4.6 we get warnings about things being 'set but not used'. In load_elf_binary() this can happen with reloc_func_desc if ELF_PLAT_INIT is defined, but doesn't use the reloc_func_desc argument. Quiet the warning/error by marking reloc_func_desc as __maybe_unused. Signed-off-by:
David Daney <ddaney@caviumnetworks.com> Signed-off-by:
-
