- 04 May, 2008 9 commits
-
-
Cyrill Gorcunov authored
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Cyrill Gorcunov authored
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ben authored
http://bugzilla.kernel.org/show_bug.cgi?id=10547 Newer Dell OptiPlex 745s hang before rebooting after 'sudo reboot'. A patch for some versions of the OptiPlex was proposed here -- http://lkml.org/lkml/2007/6/5/59 -- and is included in 2.6.23 and later kernels, according to http://lxr.linux.no/linux+v2.6.23/arch/i386/kernel/reboot.c . However, the DMI_BOARD_NAME ("0WF810") is too restrictive. Newer OptiPlex machines have a DMI_BOARD_NAME of "0RF703". I therefore suggest adding another clause to reboot.c, similar to the one in the original patch, but matching a DMI_BOARD_NAME of "0RF703". On further inspection, it seems that there are other DMI_BOARD_NAMEs for this same machine. They seem to change from time to time, which means that the current code is fragile. Moreover, using bios reboot should not break non-SFF OptiPlex 745s, and so a reasonable fix is to simply drop the match on DMI_BOARD_NAME. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Adrian Bunk authored
This patch makes the needlessly global additional_cpus static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Adrian Bunk authored
start_secondary() needlessly became global. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Sam Ravnborg authored
In kernel/acpi/realmode/Makefile use the 'always' variable to say that wakeup.bin should always be made. In acpi/Makefile we then do not need to specify the requested target and we avoid the message from make: `arch/x86/kernel/acpi/realmode/wakeup.bin' is up to date. Add wakeup.lds to list af targets to avoid rebuilding wakeup.bin - from Roland McGrath. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@suse.cz> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
this is what caused gcc 4.3 to throw an internal error when OPTIMIZE_INLINING was enabled ... Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
arch/x86/pci/Makefile_32 has a nasty detail. VISWS and NUMAQ build override the generic pci-y rules. This needs a proper cleanup, but that needs more thoughts. Undo commit 895d3093 x86: numaq fix do not override the existing pci-y rule when adding visws or numaq rules. There is also a stupid init function ordering problem vs. acpi.o Add comments to the Makefile to avoid tripping over this again. Remove the srat stub code in discontig_32.c to allow a proper NUMAQ build. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 03 May, 2008 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrtLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt: clocksource: allow read access to available/current_clocksource clocksource: Fix permissions for available_clocksource hrtimer: remove duplicate helper function
-
Ulrich Drepper authored
A very small cleanup for mq_open. We do not have to call set_close_on_exit if we create the file descriptor right away with the flag set. We have a function for this now. The resulting code is smaller and a tiny bit faster. Signed-off-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ulrich Drepper authored
This replaces the duplicated arch-specific versions of "sys_pipe()" with one unified implementation. This removes almost 250 lines of duplicated code. It's marked __weak, so that *if* an architecture wants to override the default implementation it can do so by simply having its own replacement version, since many architectures use alternate calling conventions for the 'pipe()' system call for legacy reasons (ie traditional UNIX implementations often return the two file descriptors in registers) I still haven't changed the cris version even though Linus says the BKL isn't needed. The arch maintainer can easily do it if there are really no obstacles. Signed-off-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
* git://git.infradead.org/battery-2.6: PMU battery: filenames in sysfs with spaces pda_power: add init and exit function callbacks
-
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-inttypesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-inttypes: (24 commits) Make constants in kernel/timeconst.h fixed 64 bits types: add C99-style constructors to <asm-generic/int-*.h> xtensa: types: use <asm-generic/int-*.h> for the xtensa architecture x86: types: use <asm-generic/int-*.h> for the x86 architecture v850: types: use <asm-generic/int-*.h> for the v850 architecture sparc64: types: use <asm-generic/int-*.h> for the sparc64 architecture sparc: types: use <asm-generic/int-*.h> for the sparc architecture sh: types: use <asm-generic/int-*.h> for the sh architecture s390: types: use <asm-generic/int-*.h> for the s390 architecture powerpc: types: use <asm-generic/int-*.h> for the powerpc architecture parisc: types: use <asm-generic/int-*.h> for the parisc architecture mn10300: types: use <asm-generic/int-*.h> for the mn10300 architecture mips: types: use <asm-generic/int-*.h> for the mips architecture m68k: types: use <asm-generic/int-*.h> for the m68k architecture m32r: types: use <asm-generic/int-*.h> for the m32r architecture ia64: types: use <asm-generic/int-*.h> for the ia64 architecture h8300: types: use <asm-generic/int-*.h> for the h8300 architecture frv: types: use <asm-generic/int-*.h> for the frv architecture cris: types: use <asm-generic/int-*.h> for the cris architecture blackfin: types: use <asm-generic/int-*.h> for the blackfin architecture ...
-
Jesse Barnes authored
Many thanks to Martin for his years of hosting. The pci list has moved to vger, along with what seems like the rest of the major Linux mailing lists. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: #ifdef simplification slabinfo: Support printout of the number of fallbacks slub: Whitespace cleanup and use of strict_strtoul
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) rose: Wrong list_lock argument in rose_node seqops netns: Fix reassembly timer to use the right namespace netns: Fix device renaming for sysfs bnx2: Update version to 1.7.5. bnx2: Update RV2P firmware for 5709. bnx2: Zero out context memory for 5709. bnx2: Fix register test on 5709. bnx2: Fix remote PHY initial link state. bnx2: Refine remote PHY locking. bridge: forwarding table information for >256 devices tg3: Update version to 3.92 tg3: Add link state reporting to UMP firmware tg3: Fix ethtool loopback test for 5761 BX devices tg3: Fix 5761 NVRAM sizes tg3: Use constant 500KHz MI clock on adapters with a CPMU hci_usb.h: fix hard-to-trigger race dccp: ccid2.c, ccid3.c use clamp(), clamp_t() net: remove NR_CPUS arrays in net/core/dev.c net: use get/put_unaligned_* helpers bluetooth: use get/put_unaligned_* helpers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: Delete prom_stdin and prom_stdout. sparc32: More memory probing consolidation. sparc32: Kill totally unused memory information tables. sparc64: Fix syscall restart, for real... serial: Fix sparc driver name strings. sparc64: Stop creating dummy root PCI host controller devices.
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Bolt in SLB entry for kernel stack on secondary cpus [POWERPC] PS3: Update ps3_defconfig [POWERPC] PS3: Remove unsupported wakeup sources [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static [POWERPC] PS3: Add time include to lpm [POWERPC] Fix slb.c compile warnings [POWERPC] Xilinx: Fix compile warnings [POWERPC] Squash build warning for print of resource_size_t in fsl_soc.c [RAPIDIO] fix current kernel-doc notation [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot Fix a potential issue in mpc52xx uart driver [POWERPC] mpc5200: Allow for fixed speed MII configurations [POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board
-
Heiko Carstens authored
There is no harm, when users can read the info and we ask often enough during debugging for this kind of information. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Stultz <johnstul@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Heiko Carstens authored
File permissions for /sys/devices/system/clocksource/clocksource0/available_clocksource are 600 which allows write access. But this is in fact a read only file. So change permissions to 400. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Oliver Hartkopp authored
The helper function hrtimer_callback_running() is used in kernel/hrtimer.c as well as in the updated net/can/bcm.c which now supports hrtimers. Moving the helper function to hrtimer.h removes the duplicate definition in the C-files. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Bernard Pidoux authored
In rose_node_start() as well as in rose_node_stop() __acquires() and spin_lock_bh() were wrongly passing rose_neigh_list_lock instead of rose_node_list_lock arguments. Signed-off-by: Bernard Pidoux <f6bvp@amsat.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Lezcano authored
This trivial fix retrieves the network namespace from frag queue and use it to get the network device in the right namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Lezcano authored
When a netdev is moved across namespaces with the 'dev_change_net_namespace' function, the 'device_rename' function is used to fixup kobject and refresh the sysfs tree. The device_rename function will call kobject_rename and this one will check if there is an object with the same name and this is the case because we are renaming the object with the same name. The use of 'device_rename' seems for me wrong because we usually don't rename it but just move it across namespaces. As we just want to do a mini "netdev_[un]register", IMO the functions 'netdev_[un]register_kobject' should be used instead, like an usual network device [un]registering. This patch replace device_rename by netdev_unregister_kobject, followed by netdev_register_kobject. The netdev_register_kobject will call device_initialize and will raise a warning indicating the device was already initialized. In order to fix that, I split the device initialization into a separate function and use it together with 'netdev_register_kobject' into register_netdevice. So we can safely call 'netdev_register_kobject' in 'dev_change_net_namespace'. This fix will allow to properly use the sysfs per namespace which is coming from -mm tree. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 02 May, 2008 14 commits
-
-
Michael Chan authored
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The new RV2P firmware fixes 2 issues: 1. The jumbo rx buffer page size is now configurable and set to the proper PAGE_SIZE. Before, it was assumed to be always 4K. 2. Driver sometimes would crash when receiving jumbo packets mixed with firmware management packets. This was caused by the old firmware DMA'ing to the wrong address. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
We should zero out the context memory for 5709 before each reset. When we resume after suspend for example, the memory may not be zero and the chip may not function correctly. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The register BNX2_CTX_STATUS (0x1004) should be skipped on 5709 as it contains reserved bits. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
On some remote PHY blade systems, the driver receives no initial link interrupt. As a result, the GMII/MII MAC mode does not get setup properly. To fix this problem, we add an initial poll of the link state after chip reset. With this change, the setting of the initial carrier state in the init code can be eliminated. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
bnx2_set_remote_link() should be called under bp->phy_lock to protect against concurrent polling and interrupt calls. This change is needed by the next patch which will add one initial poll of the remote PHY link status. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The forwarding table binary interface (my bad choice), only exposes the port number of the first 8 bits. The bridge code was limited to 256 ports at the time, but now the kernel supports up 1024 ports, so the upper bits are lost when doing: brctl showmacs The fix is to squeeze the extra bits into small hole left in data structure, to maintain binary compatiablity. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matt Carlson authored
This patch updates the version number to 3.92. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matt Carlson authored
All variants of the 5714, 5715, and 5780 offer a feature called the "Universal Management Port". This feature is implemented in firmware and is largely transparent to the driver, except... It turns out that the UMP firmware needs to know the current status of the link. Because the firmware cannot touch the PHY registers while the driver is in control of the device, it needs the driver to report link status changes through an additional handshaking mechanism. Without this handshake, it has been observed in the field that the UMP firmware will not operate correctly. This patch implements the new handshake with the UMP firmware. Since the handshake uses the same mechanism ASF heartbeats use, code was added to detect and wait for completion of a pending previous event. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matt Carlson authored
A CPMU related loopback test bug existed for AX revisions of the 5761. While that errata has been fixed, the CPMU still slows down the core clock too far to run the loopback test successfully. This patch disables the CPMU LINK_SPEED mode just like we do with the AX revisions of the 5761 and all revisions of the 5784. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matt Carlson authored
The 5761 NVRAM sizes assigned to the nvram_size member are half as big as they should be. This patch corrects the NVRAM sizes and replaces the hardcoded constants with preprocessor constants for readability. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matt Carlson authored
The MI clock is not configured correctly on adapters with the CPMU present. The tg3 driver has code which statically sets the MI clock to be a fraction of the speed at which the core clock is running. However, the CPMU can change the adapter's core clock frequency based on operating conditions. Consequently, the MI will run slow when the core's clock has been slowed down. There is a new 500KHz constant frequency clock available on adapters with a CPMU. This patch removes the static core clock scaling and configures the MI clock to use this new 500KHz clock instead. Running the MI clock at slower speeds will not directly result in data corruption, but it does challenge the PHY read and write routine timeouts. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Machek authored
If someone tries to _urb_unlink while _urb_queue_head is running, he'll see _urb->queue == NULL and fail to do any locking. Prevent that from happening by strategically placed barriers. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harvey Harrison authored
Makes the intention of the nested min/max clear. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-