- 10 Jan, 2010 16 commits
-
-
Francisco Jerez authored
This should avoid a race condition on nv0x, if we're doing it with actual PGRAPH objects and a there's a fence within the FIFO DMA fetch area when a context switch kicks in. In that case we get an ILLEGAL_MTHD interrupt as expected, but the values in PGRAPH_TRAPPED_ADDR aren't calculated correctly and they're almost useless (e.g. you can see ILLEGAL_MTHDs for the now inactive channel, with a wrong offset/data pair). Signed-off-by: Francisco Jerez <currojerez@riseup.net>
-
Francisco Jerez authored
It will be useful for various synchronization purposes, mostly stolen from "[PATCH] drm/nv50: synchronize user channel after buffer object move on kernel channel" by Maarten Maathuis. Signed-off-by: Francisco Jerez <currojerez@riseup.net>
-
Maarten Maathuis authored
- This should be better than what we have now. - I'm less sure about the non power of two path. Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
-
Maarten Maathuis authored
- Aligning to block size should ensure that the extra size is enough. - Using roundup, because not all sizes are powers of two. Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
-
Francisco Jerez authored
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
-
Francisco Jerez authored
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
-
Francisco Jerez authored
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
-
Marcin Slusarz authored
struct fb_fillrect->color is not a color, but index into pseudo_palette array Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Should fix dim panel issues reported on Dell M6400/M6500. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Francisco Jerez authored
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
-
Francisco Jerez authored
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
-
Francisco Jerez authored
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
-
Francisco Jerez authored
This partially reverts e4b41066, as this driver is intended to be useful with any KMS driver for suitable hardware. The missing build dependency that commit workarounded was DRM_KMS_HELPER. Signed-off-by: Francisco Jerez <currojerez@riseup.net>
-
Francisco Jerez authored
This commit has also the following 3 bugfix commits squashed into it from the nouveau git tree: drm/nouveau: Fix up the tiling alignment restrictions for nv1x. drm/nouveau: Fix up the nv2x tiling alignment restrictions. drm/nv50: fix align typo for g9x Signed-off-by: Francisco Jerez <currojerez@riseup.net>
-
Francisco Jerez authored
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
-
Francisco Jerez authored
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
-
- 08 Jan, 2010 17 commits
-
-
Dave Airlie authored
-
Dave Airlie authored
-
Dave Airlie authored
If userspace (plymouth in this case) asks for a deeper depth, refuse it as well due to lack of resizing. This fixes an issue since < 32MB cards went to 8bpp and plymouth crashes on startup. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
David John authored
With the current DRM code, an output that has been powered off from userspace will automatically power back on when resuming from suspend. This patch fixes this behaviour. Tested only with the Intel i915 driver on an Intel GM45 Express chipset. Signed-off-by: David John <davidjon@xenontk.org> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
If for any reason we haven't installed handler we shouldn't try to enable IRQ/MSI on the hw so we don't get unhandled IRQ/MSI which makes the kernel sad. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
In some case vblank might not be initialized and we shouldn't try to use associated function. This patch make sure this is the case. It also export drm_vblank_cleanup so driver can cleanup vblank if for any reason IRQ/MSI is not working. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alexander Beregalov authored
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
In some case we weren't releasing the AGP device at module unloading. This leaded to unfunctional AGP at next module load. This patch make sure we release the AGP bus if we acquire it. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
R300 family will hard lockup if host path read cache flush is done through MMIO to HOST_PATH_CNTL. But scheduling same flush through ring seems harmless. This patch remove the hdp_flush callback and add a flush after each fence emission which means a flush after each IB schedule. Thus we should have same behavior without the hard lockup. Tested on R100,R200,R300,R400,R500,R600,R700 family. V2: Adjust fence counts in r600_blit_prepare_copy() Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Corbin Simpson authored
Long story short, this fixes sporadic hardlocks with my rv410 during times of intense 2D acceleration (Flash on Fx3). V2: Fix indentation and move errata_fini to suspend function so we don't leak scratch register over suspend/resume cycle. V3: Move scratch_reg to asic specific structure (aim is to slowly move stuff to asic specific structure and avoid poluting radeon_device struct with asic specific variables) Signed-off-by: Corbin Simpson <MostAwesomeDude@gmail.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
This detects if the sideport memory is enabled and if it is VRAM is evicted on suspend/resume. This should fix s/r issues on some IGPs. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Darren Jenkins authored
There are a couple of array overruns, and some associated confusion in the code. This is just a wild guess at what the code should actually look like. Coverity CID: 13305 13306 agd5f: fix up the original intent of the timing code Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
This is displayport used for internal connections such as laptop panels and systems with integrated monitors. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Add a new connector type for eDP (embedded displayport) eDP is more or less the same as DP but there are some cases when you might want to handle it separately. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Makes it easier to keep in sync with ddx and the upstream AMD versions. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Also remove the problematic enums that were unused remnants from the ddx. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 07 Jan, 2010 7 commits
-
-
Dave Airlie authored
* korg/drm-radeon-next: drm/radeon/kms: rs600: use correct mask for SW interrupt gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test drm/radeon/radeon_device.c: move a dereference below a NULL test drm/radeon/radeon_fence.c: move a dereference below the NULL test drm/radeon/radeon_connectors.c: add a NULL test before dereference drm/radeon/kms: fix memory leak drm/radeon/kms: add missing breaks in i2c and ss lookups drm/radeon/kms: add primary dac adj values table drm/radeon/kms: fallback to default connector table
-
Luca Tettamanti authored
The mask happens to be the same, but the IH is reading the status, not the not the control register. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Darren Jenkins authored
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13338 Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Darren Jenkins authored
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13335 Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Darren Jenkins authored
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13334 Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Darren Jenkins authored
The encoder variable can be NULL in this function so I believe it should be checked before dereference. Coverity CID: 13253 [airlied: extremely unlikely to happen] Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jiri Slaby authored
Stanse found a memory leak in radeon_master_create. master_priv is not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Dave Airlie <airlied@redhat.com>
-