- 16 Jul, 2020 10 commits
-
-
Aneesh Kumar K.V authored
With kernel now supporting new pmem flush/sync instructions, we can now enable the kernel to initialize the device. On P10 these devices would appear with a new compatible string. For PAPR device we have compatible "ibm,pmemory-v2" and for OF pmem device we have compatible "pmem-region-v2" Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200701072235.223558-8-aneesh.kumar@linux.ibm.com
-
Aneesh Kumar K.V authored
nvdimm expect the flush routines to just mark the cache clean. The barrier that mark the store globally visible is done in nvdimm_flush(). Signed-off-by:
-
Aneesh Kumar K.V authored
pmem on POWER10 can now use phwsync instead of hwsync to ensure all previous writes are architecturally visible for the platform buffer flush. Signed-off-by:
-
Aneesh Kumar K.V authored
Architectures like ppc64 provide persistent memory specific barriers that will ensure that all stores for which the modifications are written to persistent storage by preceding dcbfps and dcbstps instructions have updated persistent storage before any data access or data transfer caused by subsequent instructions is initiated. This is in addition to the ordering done by wmb() Update nvdimm core such that architecture can use barriers other than wmb to ensure all previous writes are architecturally visible for the platform buffer flush. Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Start using dcbstps; phwsync; sequence for flushing persistent memory range. The new instructions are implemented as a variant of dcbf and hwsync and on P8 and P9 they will be executed as those instructions. We avoid using them on older hardware. This helps to avoid difficult to debug bugs. Signed-off-by:
-
Aneesh Kumar K.V authored
POWER10 introduces two new variants of dcbf instructions (dcbstps and dcbfps) that can be used to write modified locations back to persistent storage. Additionally, POWER10 also introduce phwsync and plwsync which can be used to establish order of these writes to persistent storage. This patch exposes these instructions to the rest of the kernel. The existing dcbf and hwsync instructions in P8 and P9 are adequate to enable appropriate synchronization with OpenCAPI-hosted persistent storage. Hence the new instructions are added as a variant of the old ones that old hardware won't differentiate. Signed-off-by:
-
Aneesh Kumar K.V authored
The PAPR based virtualized persistent memory devices are only supported on POWER9 and above. In the followup patch, the kernel will switch the persistent memory cache flush functions to use a new `dcbf` variant instruction. The new instructions even though added in ISA 3.1 works even on P8 and P9 because these are implemented as a variant of existing `dcbf` and `hwsync` and on P8 and P9 behaves as such. Considering these devices are only supported on P8 and above, update the driver to prevent a P7-compat guest from using persistent memory devices. We don't update of_pmem driver with the same condition, because, on bare-metal, the firmware enables pmem support only on P9 and above. There the kernel depends on OPAL firmware to restrict exposing persistent memory related device tree entries on older hardware. of_pmem.ko is written without any arch dependency and we don't want to add ppc64 specific cpu feature check in of_pmem driver. Signed-off-by:
-
Nicholas Piggin authored
When platform doesn't support GTSE, let TLB invalidation requests for radix guests be off-loaded to the host using H_RPT_INVALIDATE hcall. [hcall wrapper, error path handling and renames] Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Bharata B Rao <bharata@linux.ibm.com> Signed-off-by:
-
Bharata B Rao authored
H_REGISTER_PROC_TBL asks for GTSE by default. GTSE flag bit should be set only when GTSE is supported. Signed-off-by:
-
Bharata B Rao authored
Make GTSE an MMU feature and enable it by default for radix. However for guest, conditionally enable it if hypervisor supports it via OV5 vector. Let prom_init ask for radix GTSE only if the support exists. Having GTSE as an MMU feature will make it easy to enable radix without GTSE. Currently radix assumes GTSE is enabled by default. Signed-off-by:
-
- 15 Jul, 2020 19 commits
-
-
Christophe Leroy authored
On the same way as already done on PPC32, drop __get_datapage() function and use get_datapage inline macro instead. See commit ec0895f0 ("powerpc/vdso32: inline __get_datapage()") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Christophe Leroy authored
Instead of doing a __get_user() from the first and last location into a tmp var which won't be used, use fault_in_pages_readable() Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Christophe Leroy authored
save_general_regs() which does special handling when i == PT_SOFTE. Rewrite it to minimise the specific part, especially the __put_user() and associated error handling is the same so make it common. Signed-off-by:
-
Christophe Leroy authored
Since commit ("1bd79336 powerpc: Fix various syscall/signal/swapcontext bugs"), getting save_general_regs() called without FULL_REGS() is very unlikely and generates a warning. The 32-bit version of save_general_regs() doesn't take care of it at all and copies all registers anyway since that commit. Moreover, commit 965dd3ad ("powerpc/64/syscall: Remove non-volatile GPR save optimisation") is another reason why it would never happen. So the same with 64-bit, don't worry about FULL_REGS() and copy all registers all the time. Signed-off-by: -
Christophe Leroy authored
Doing kasan pages allocation in MMU_init is too early, kernel doesn't have access yet to the entire memory space and memblock_alloc() fails when the kernel is a bit big. Do it from kasan_init() instead. Fixes: 2edb16ef ("powerpc/32: Add KASAN support") Fixes: d2a91cef ("powerpc/kasan: Fix shadow pages allocation failure") Cc: stable@vger.kernel.org Reported-by:
Erhard F. <erhard_f@mailbox.org> Signed-off-by:
-
Christophe Leroy authored
This reverts commit d2a91cef. This commit moved too much work in kasan_init(). The allocation of shadow pages has to be moved for the reason explained in that patch, but the allocation of page tables still need to be done before switching to the final hash table. First revert the incorrect commit, following patch redoes it properly. Fixes: d2a91cef ("powerpc/kasan: Fix shadow pages allocation failure") Cc: stable@vger.kernel.org Reported-by:
-
Christophe Leroy authored
Documentation wrongly tells that book3s/32 CPU have hash MMU. 603 and e300 core only have software loaded TLB. 755, 7450 family and e600 core have both hash MMU and software loaded TLB. This can be selected by setting a bit in HID2 (755) or HID0 (others). At the time being this is not supported by the kernel. Make this explicit in the documentation. Signed-off-by:
-
Nicholas Piggin authored
Add a testcase that tries to trigger the FPU denormal exception on Power8 or earlier CPUs. Prior to commit 4557ac6b ("powerpc/64s/exception: Fix 0x1500 interrupt handler crash") this would trigger a crash such as: Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: iptable_mangle xt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 xt_tcpudp tun bridge stp llc ip6table_filter ip6_tables iptable_filter fuse kvm_hv binfmt_misc squashfs mlx4_ib ib_uverbs dm_multipath scsi_dh_rdac scsi_dh_alua ib_core mlx4_en sr_mod cdrom bnx2x lpfc mlx4_core crc_t10dif scsi_transport_fc sg mdio vmx_crypto crct10dif_vpmsum leds_powernv powernv_rng rng_core led_class powernv_op_panel sunrpc ip_tables x_tables autofs4 CPU: 159 PID: 6854 Comm: fpu_denormal Not tainted 5.8.0-rc2-gcc-8.2.0-00092-g4ec7aaab0828 #192 NIP: c0000000000100ec LR: c00000000001b85c CTR: 0000000000000000 REGS: c000001dd818f770 TRAP: 1500 Not tainted (5.8.0-rc2-gcc-8.2.0-00092-g4ec7aaab0828) MSR: 900000000290b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002884 XER: 20000000 CFAR: c00000000001005c IRQMASK: 1 GPR00: c00000000001c4c8 c000001dd818fa00 c00000000171c200 c000001dd8101570 GPR04: 0000000000000000 c000001dd818fe90 c000001dd8101590 000000000000001d GPR08: 0000000000000010 0000000000002000 c000001dd818fe90 fffffffffc48ac60 GPR12: 0000000000002200 c000001ffff4f480 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 00007fffab225b40 0000000000000001 c000000001757168 GPR24: c000001dd8101570 c0000018027b00f0 c000001dd8101570 c000000001496098 GPR28: c00000000174ad05 c000001dd8100000 c000001dd8100000 c000001dd8100000 NIP save_fpu+0xa8/0x2ac LR __giveup_fpu+0x2c/0xd0 Call Trace: 0xc000001dd818fa80 (unreliable) giveup_all+0x118/0x120 __switch_to+0x124/0x6c0 __schedule+0x390/0xaf0 do_task_dead+0x70/0x80 do_exit+0x8fc/0xe10 do_group_exit+0x64/0xd0 sys_exit_group+0x24/0x30 system_call_exception+0x164/0x270 system_call_common+0xf0/0x278 Signed-off-by:
-
Nicholas Piggin authored
Returning from an interrupt or syscall to a signal handler currently begins execution directly at the handler's entry point, with LR set to the address of the sigreturn trampoline. When the signal handler function returns, it runs the trampoline. It looks like this: # interrupt at user address xyz # kernel stuff... signal is raised rfid # void handler(int sig) addis 2,12,.TOC.-.LCF0@ha addi 2,2,.TOC.-.LCF0@l mflr 0 std 0,16(1) stdu 1,-96(1) # handler stuff ld 0,16(1) mtlr 0 blr # __kernel_sigtramp_rt64 addi r1,r1,__SIGNAL_FRAMESIZE li r0,__NR_rt_sigreturn sc # kernel executes rt_sigreturn rfid # back to user address xyz Note the blr with no matching bl. This can corrupt the return predictor. Solve this by instead resuming execution at the signal trampoline which then calls the signal handler. qtrace-tools link_stack checker confirms the entire user/kernel/vdso cycle is balanced after this patch, whereas it's not upstream. Alan confirms the dwarf unwind info still looks good. gdb still recognises the signal frame and can step into parent frames if it break inside a signal handler. Performance is pretty noisy, not a very significant change on a POWER9 here, but branch misses are consistently a lot lower on a microbenchmark: Performance counter stats for './signal': 13,085.72 msec task-clock # 1.000 CPUs utilized 45,024,760,101 cycles # 3.441 GHz 65,102,895,542 instructions # 1.45 insn per cycle 11,271,673,787 branches # 861.372 M/sec 59,468,979 branch-misses # 0.53% of all branches 12,989.09 msec task-clock # 1.000 CPUs utilized 44,692,719,559 cycles # 3.441 GHz 65,109,984,964 instructions # 1.46 insn per cycle 11,282,136,057 branches # 868.585 M/sec 39,786,942 branch-misses # 0.35% of all branches Signed-off-by: -
Arnd Bergmann authored
The kernel test robot pointed out a slightly different error message after recent commit 5456ffde ("powerpc/spufs: simplify spufs core dumping") to spufs for a configuration that never worked: powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_proxydma_info_dump': >> file.c:(.text+0x4c68): undefined reference to `.dump_emit' powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_dma_info_dump': file.c:(.text+0x4d70): undefined reference to `.dump_emit' powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_wbox_info_dump': file.c:(.text+0x4df4): undefined reference to `.dump_emit' Add a Kconfig dependency to prevent this from happening again. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
-
Oliver O'Halloran authored
pnv_ioda_setup_bus_dma() is only used when a passed through PE is returned to the host. If the kernel is built without IOMMU support this is dead code. Move it under the #ifdef with the rest of the IOMMU API support. Reported-by:
Oliver O'Halloran <oohall@gmail.com> Reviewed-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Oliver O'Halloran authored
The kernel test robot noticed these are non-static which causes Clang to print some warnings. These are called via ppc_md function pointers so there's no need for them to be non-static. Reported-by:
-
Abhishek Goel authored
Commit 1961acad removes usage of function "validate_dt_prop_sizes". This patch removes this unused function. Signed-off-by:
Abhishek Goel <huntbag@linux.vnet.ibm.com> Signed-off-by:
-
Srikar Dronamraju authored
Unlike drivers/base/cacheinfo, powerpc cacheinfo code is not exposing shared_cpu_list under /sys/devices/system/cpu/cpu<n>/cache/index<m> Add shared_cpu_list to per cpu per index directory to maintain parity with x86. Some scripts (example: mmtests https://github.com/gormanm/mmtests) seem to be looking for shared_cpu_list instead of shared_cpu_map. Before this patch: # ls /sys/devices/system/cpu0/cache/index1 coherency_line_size number_of_sets size ways_of_associativity level shared_cpu_map type # cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map 00ff # After this patch: # ls /sys/devices/system/cpu0/cache/index1 coherency_line_size number_of_sets shared_cpu_map type level shared_cpu_list size ways_of_associativity # cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map 00ff # cat /sys/devices/system/cpu0/cache/index1/shared_cpu_list 0-7 # Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
-
Srikar Dronamraju authored
In anticipation of implementing shared_cpu_list, move code under shared_cpu_map_show() to a common function. No functional changes. Signed-off-by:
-
Srikar Dronamraju authored
Tejun Heo had modified shared_cpu_map_show() to use scnprintf instead of cpumap_print during support for *pb[l] format. Refer commit 0c118b7b ("powerpc: use %*pb[l] to print bitmaps including cpumasks and nodemasks"). cpumap_print_to_pagebuf() is a standard function to print cpumap. With commit 9cf79d11 ("bitmap: remove explicit newline handling using scnprintf format string"), there is no need to print explicit newline and trailing null character. cpumap_print_to_pagebuf() internally uses scnprintf(). Hence replace scnprintf() with cpumap_print_to_pagebuf(). Note: shared_cpu_map_show() in drivers/base/cacheinfo.c already uses cpumap_print_to_pagebuf(). Before this patch: # cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map 00ff # (Notice the extra blank line). After this patch: # cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map 00ff # Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Philippe Bergheaud authored
Some opencapi FPGA images allow to control if the FPGA should be reloaded on the next adapter reset. If it is supported, the image specifies it through a Vendor Specific DVSEC in the config space of function 0. Signed-off-by:
Philippe Bergheaud <felix@linux.ibm.com> Signed-off-by:
Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
Sam Bobroff authored
I'm sorry to say I can no longer maintain this position. Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by:
-
Anton Blanchard authored
I'm seeing RCU warnings when exiting xmon. xmon resets the NMI watchdog, but does nothing with the RCU stall or soft lockup watchdogs. Add a helper function that handles all three. Signed-off-by:
Anton Blanchard <anton@ozlabs.org> Acked-by:
-
- 08 Jul, 2020 1 commit
-
-
Desnes A. Nunes do Rosario authored
An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per- formed when count_pmc() is used to reset PMCs on a few selftests. This extra pmc_count can occasionally invalidate results, such as the ones from cycles_test shown hereafter. The ebb_check_count() failed with an above the upper limit error due to the extra value on ebb_state.stats.pmc_count. Furthermore, this extra count is also indicated by extra PMC1 trace_log on the output of the cycle test (as well as on pmc56_overflow_test): ========== ... [21]: counter = 8 [22]: register SPRN_MMCR0 = 0x0000000080000080 [23]: register SPRN_PMC1 = 0x0000000080000004 [24]: counter = 9 [25]: register SPRN_MMCR0 = 0x0000000080000080 [26]: register SPRN_PMC1 = 0x0000000080000004 [27]: counter = 10 [28]: register SPRN_MMCR0 = 0x0000000080000080 [29]: register SPRN_PMC1 = 0x0000000080000004 >> [30]: register SPRN_PMC1 = 0x000000004000051e PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e) [FAIL] Test FAILED on line 52 failure: cycles ========== Signed-off-by:
Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Tested-by:
Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by:
-
- 06 Jul, 2020 1 commit
-
-
Bin Meng authored
Drop CONFIG_MTD_M25P80 that was removed in commit b35b9a10 ("mtd: spi-nor: Move m25p80 code in spi-nor.c") Signed-off-by:
Bin Meng <bin.meng@windriver.com> Signed-off-by:
-
- 30 Jun, 2020 5 commits
-
-
Michael Ellerman authored
With CONFIG_OF_ALL_DTBS=y, as set by eg. allmodconfig, we see lots of warnings about our dts files, such as: arch/powerpc/boot/dts/glacier.dts:492.26-532.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" The node name should not particularly matter, it's just a name, and AFAICS there's no kernel code that cares whether nodes are *named* "pciex" or "pcie". So shutup these warnings by converting to the name dtc wants. As always there's some risk this could break something obscure that does rely on the name, in which case we can revert. Signed-off-by:
-
Nathan Chancellor authored
Clang warns: arch/powerpc/boot/main.c:107:18: warning: array comparison always evaluates to a constant [-Wtautological-compare] if (_initrd_end > _initrd_start) { ^ arch/powerpc/boot/main.c:155:20: warning: array comparison always evaluates to a constant [-Wtautological-compare] if (_esm_blob_end <= _esm_blob_start) ^ 2 warnings generated. These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr). Reported-by:Joel Stanley <joel@jms.id.au> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Tested-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
Sandipan Das authored
Apart from read and write access, memory protection keys can also be used for restricting execute permission of pages on powerpc. This adds a test to verify if the feature works as expected. Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Signed-off-by:
-
Sandipan Das authored
This moves a function to test if the MMU is in Hash mode under the generic test utilities. Signed-off-by:
-
Sandipan Das authored
The Power ISA mandates that all writes to the Authority Mask Register (AMR) must always be preceded as well as succeeded by a context synchronizing instruction. This makes sure that the tests follow this requirement when attempting to update a pkey's access rights. Signed-off-by:
-
- 22 Jun, 2020 4 commits
-
-
Christophe Leroy authored
Move ptep_get() close to pte_update(), in an ifdef section already dedicated to powerpc 8xx. This section contains explanation about the layout of page table entries. Also modify it to return 4 times the pte value instead of padding with zeroes. Signed-off-by:
-
Aneesh Kumar K.V authored
With hash translation, the hypervisor can hint the LPAR about 16GB contiguous range via ibm,expected#pages. The kernel marks the range specified in the device tree as reserved. Avoid doing this when using radix translation. Radix translation only supports 1G gigantic hugepage and kernel can do the 1G gigantic hugepage allocation via early memblock reservation. This can be done because with radix translation pages are not required to be contiguous on the host. Signed-off-by:
-
Imre Kaloz authored
This patch splits up the compile flags between ppc40x and ppc44x. Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> Signed-off-by:
-
Christophe Leroy authored
FIX_EARLY_DEBUG_BASE reserves a 128k area for debuging. When page size is 256k, the calculation results in a 0 number of pages, leading to the following failure: CC arch/powerpc/kernel/asm-offsets.s In file included from ./arch/powerpc/include/asm/nohash/32/pgtable.h:77:0, from ./arch/powerpc/include/asm/nohash/pgtable.h:8, from ./arch/powerpc/include/asm/pgtable.h:20, from ./include/linux/pgtable.h:6, from ./arch/powerpc/include/asm/kup.h:42, from ./arch/powerpc/include/asm/uaccess.h:9, from ./include/linux/uaccess.h:11, from ./include/linux/crypto.h:21, from ./include/crypto/hash.h:11, from ./include/linux/uio.h:10, from ./include/linux/socket.h:8, from ./include/linux/compat.h:15, from arch/powerpc/kernel/asm-offsets.c:14: ./arch/powerpc/include/asm/fixmap.h:75:2: error: overflow in enumeration values __end_of_permanent_fixed_addresses, ^ make[2]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1 Ensure the debug area is at least one page. Fixes: b8e8efaa ("powerpc: reserve fixmap entries for early debug") Reported-by:
-
