- 14 May, 2008 40 commits
-
-
Steven Toth authored
Cleanup #5 Signed-off-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Steven Toth authored
Cleanup #4 Signed-off-by:
-
Steven Toth authored
Cleanup #3 Signed-off-by:
-
Steven Toth authored
Cleanup #2 Signed-off-by:
-
Steven Toth authored
Cleanup #1 Signed-off-by:
-
Steven Toth authored
Initial check-in of the original driver to establish history. Signed-off-by:
Chia-Ling Lu Developer <chialing@realtek.com.tw> Signed-off-by:
-
Matthias Schwarzott authored
This patch does some small cleanup to mt312. It changes kconfig description to also list the ZL10313. It does change some strange symbol names to be consistent with module name mt312 and naming of all other functions in there. * vp310_mt312_ops -> mt312_ops * vp310_mt312_attach -> mt312_attach Adds a MODULE_AUTHOR for me Signed-off-by:
Matthias Schwarzott <zzam@gentoo.org> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Ingo Molnar authored
x86.git testing found the following build bug on latest -git: CC [M] drivers/media/video/mt9v022.o drivers/media/video/mt9v022.c: In function 'bus_switch_request': drivers/media/video/mt9v022.c:199: error: implicit declaration of function 'gpio_is_valid' drivers/media/video/mt9v022.c:201: error: implicit declaration of function 'gpio_request' drivers/media/video/mt9v022.c:207: error: implicit declaration of function 'gpio_direction_output' drivers/media/video/mt9v022.c:211: error: implicit declaration of function 'gpio_free' drivers/media/video/mt9v022.c: In function 'bus_switch_act': drivers/media/video/mt9v022.c:237: error: implicit declaration of function 'gpio_set_value_cansleep' make[2]: *** [drivers/media/video] Error 2 make[1]: *** [drivers/media] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [drivers] Error 2 with this config: http://redhat.com/~mingo/misc/config-Sat_May__3_16_08_39_CEST_2008.bad the bug was that the driver uses GPIO functionality but only includes the GPIO interface definitions for the CONFIG_MT9M001_PCA9536_SWITCH case, which was not set in this config. The quick fix seems to be to include linux/gpio.h unconditionally. (this seems like a small cleanup as well as it removes and #ifdef is more robust than an inclusion of asm/gpio.h) Not tested too much yet, so please have another look in any case. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Adrian Bunk authored
itd1000_fre_values[] can become static const. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - cx18-i2c.c should #include "cx18-i2c.h" for getting the prototypes of it's global functions - make the following needlessly global functions static: - cx18-fileops.c:cx18_claim_stream() - cx18-fileops.c:cx18_release_stream() - cx18-queue.c:cx18_queue_move() - remove the following unused functions: - cx18-driver.c:cx18_waitq() - cx18-queue.c:cx18_buf_copy_from_user() Signed-off-by:
-
Hans Verkuil authored
- don't show kernel backtrace when the allocation of the buffers fails: the normal ivtv/cx18 messages are clear enough and the backtrace scares users. - fix cleanup after the buffer allocation fails (caused kernel panic). Signed-off-by:
-
Hans Verkuil authored
Fix compile warnings if MODULE is not defined. Signed-off-by:
-
Hans Verkuil authored
Fix conflict with cx18 driver. Signed-off-by:
-
Mauro Carvalho Chehab authored
Since: 1) FW_LOADER is defined as: config FW_LOADER tristate "Userspace firmware loading support" depends on HOTPLUG 2) several V4L/DVB driver just selects it; 3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER. So, All drivers that select FW_LOADER should also depend on HOTPLUG. An easier solution (for the end-user perspective) would be to "select HOTPLUG". However, live is not simple. This would cause recursive dependency issues like this one: drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD -> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA -> USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB Signed-off-by: -
Mauro Carvalho Chehab authored
cx88 doesn't need support for FW_LOADER. Instead, this is required only for cx88-blackbird. Also, cx88-blackbird depends on HOTPLUG, due to FW_LOADER dependency. Signed-off-by: -
Mauro Carvalho Chehab authored
em28xx-dvb doesn't need FW_LOADER. Instead, tuner-xc2028 needs to select FW_LOADER. Also, this can happen only if HOTPLUG is selected, since FW_LOADER is dependent on HOTPLUG. Signed-off-by: -
Mauro Carvalho Chehab authored
Since all tuners are dependent of I2C, move I2C dependency to MEDIA_TUNER. Also, simplifies the dependencies for the other Kconfig items. Signed-off-by: -
Mauro Carvalho Chehab authored
VIDEO_TUNER is responsible for compilation of tuners.ko module. This were the previous behaviour before the creation of MEDIA_TUNER. Before this patch, tuner.ko were created even for drivers that don't need a tuner (like webcam drivers). Signed-off-by: -
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Only show debug from tda18271_set_standby_mode if DBG_ADV is set. Signed-off-by:
-
Michael Krufky authored
Abort rf band calibration loop for the TDA18271HD/C2 if an error is detected. Signed-off-by:
-
Michael Krufky authored
fix error handling in tda18271c2_rf_cal_init immediate path Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Ingo Molnar authored
x86.git testing found the following build bug in v2.6.26-rc1: drivers/built-in.o: In function `cinergyt2_probe': cinergyT2.c:(.text+0xb6117): undefined reference to `input_allocate_device' cinergyT2.c:(.text+0xb6230): undefined reference to `input_register_device' cinergyT2.c:(.text+0xb623d): undefined reference to `input_free_device' with the following config: http://redhat.com/~mingo/misc/config-Sun_May__4_22_06_54_CEST_2008.bad The reason for the bug is that the cinergyT2 driver depends on CONFIG_INPUT functionality, but if INPUT is modular it's still possible to build CONFIG_DVB_CINERGYT2=y - which leads to missing symbols. The solution is to make DVB_CINERGYT2 dependent on INPUT. [ This solves the build problem - i have not tested the driver on this card. ] Signed-off-by:
-
Randy Dunlap authored
Fix undefined references in au0828: depends on USB and select VIDEO_TVEEPROM Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Ingo Molnar authored
x86.git testing found the following build failure in v2.6.26-rc1: MODPOST 424 modules ERROR: "tveeprom_hauppauge_analog" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "tveeprom_read" [drivers/media/video/au0828/au0828.ko] undefined! with this config: http://redhat.com/~mingo/misc/config-Sat_May__3_22_28_58_CEST_2008.bad this patch does what other video drivers do to utilize the VIDEO_TVEEPROM functionality (and this resolves the build problem) - but i have not checked it on real hardware and i have not checked whether the fix is complete. selections, so some items might still be missing - just not triggered with this specific config. Signed-off-by:
-
Michael Krufky authored
Fix the following build error: drivers/built-in.o: In function `xc_load_fw_and_init_tuner': xc5000.c:(.text+0x2dacd): undefined reference to `request_firmware' xc5000.c:(.text+0x2daf0): undefined reference to `release_firmware' xc5000.c:(.text+0x2db85): undefined reference to `release_firmware' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by:
-
Robert Schedel authored
This change addresses kernel bug #10459: In kernel 2.6.25 the budget_av driver polls for an CI slot in 100ms intervals (because no interrupt solution for budget_av cards is feasible due to HW reasons). If no CI/CAM is connected to the DVB card, polling times out only after 250ms. This periodic polling leads to high CPU load. The change increases the polling interval for empty slots from 100ms to 5s. Intervals for remaining slot states (invalid, in progress, ready) are unchanged, as they are either temporary conditions or no timeout should occur. Signed-off-by:
Robert Schedel <r.schedel@yahoo.de> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Michael Krufky authored
The cx23885 driver used to use dvb-pll for LG-TDVS-H064F support on the FusionHDTV5 Express. This has since been converted to use tuner-simple instead, once digital tuning support was added to tuner-simple. Since cx23885 no longer uses dvb-pll, remove the #include "dvb-pll.h", and the DVB_PLL Kconfig selection. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
This driver uses some sysfs helper functions that are available only for legacy drivers. It also requires linux/mm.h. This patch fixes compiliation when not in compat mode. Thanks to Ingo Molnar for identifying this issue. Acked-by:
Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Both mt9v022 and mt9m001 cameras are controlled over the I2C bus. Respectively, their drivers require I2C to be built successfully. Thanks to Ingo Molnar for reporting the build-breakage. Signed-off-by:
-
Michael Krufky authored
Thanks to Ingo Molnar for finding this. Signed-off-by:
-
