1. 15 Oct, 2018 4 commits
  2. 12 Oct, 2018 1 commit
  3. 11 Oct, 2018 10 commits
  4. 10 Oct, 2018 7 commits
    • Lyude Paul's avatar
      drm/nouveau: Fix nv50_mstc->best_encoder() · e87b0bbc
      Lyude Paul authored
      As mentioned in the previous commit, we currently prevent new modesets
      on recently-removed MST connectors by returning no encoder from our
      ->best_encoder() callback once the MST port has disappeared. This is
      wrong however, because it prevents legacy modesetting users from being
      able to disable CRTCs on MST connectors after the connector's respective
      topology has disappeared.
      
      So, fix this by instead by just always returning a valid encoder.
      
      Changes since v2:
      - Remove usage of atomic MST helper for now, since that got replaced
        with a much simpler solution
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      Reviewed-by: default avatarBen Skeggs <bskeggs@redhat.com>
      Cc: stable@vger.kernel.org
      Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-3-lyude@redhat.com
      e87b0bbc
    • Lyude Paul's avatar
      drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors · b5d29843
      Lyude Paul authored
      It appears when testing my previous fix for some of the legacy
      modesetting issues with MST, I misattributed some kernel splats that
      started appearing on my machine after a rebase as being from upstream.
      But it appears they actually came from my patch series:
      
      [    2.980512] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
      [    2.980516] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] is not registered
      [    2.980516] ------------[ cut here ]------------
      [    2.980519] Could not determine valid watermarks for inherited state
      [    2.980553] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
      [    2.980556] Modules linked in: i915(O+) i2c_algo_bit drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops drm(O) intel_rapl x86_pkg_temp_thermal iTCO_wdt wmi_bmof coretemp crc32_pclmul psmouse i2c_i801 mei_me mei i2c_core lpc_ich mfd_core tpm_tis tpm_tis_core wmi tpm thinkpad_acpi pcc_cpufreq video ehci_pci crc32c_intel serio_raw ehci_hcd xhci_pci xhci_hcd
      [    2.980577] CPU: 3 PID: 551 Comm: systemd-udevd Tainted: G           O      4.19.0-rc7Lyude-Test+ #1
      [    2.980579] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET63WW (1.27 ) 11/10/2016
      [    2.980605] RIP: 0010:intel_modeset_init+0x14d7/0x19f0 [i915]
      [    2.980607] Code: 89 df e8 ec 27 02 00 e9 24 f2 ff ff be 03 00 00 00 48 89 df e8 da 27 02 00 e9 26 f2 ff ff 48 c7 c7 c8 d1 34 a0 e8 23 cf dc e0 <0f> 0b e9 7c fd ff ff f6 c4 04 0f 85 37 f7 ff ff 48 8b 83 60 08 00
      [    2.980611] RSP: 0018:ffffc90000287988 EFLAGS: 00010282
      [    2.980614] RAX: 0000000000000000 RBX: ffff88031b488000 RCX: 0000000000000006
      [    2.980617] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff880321ad54d0
      [    2.980620] RBP: ffffc90000287a10 R08: 000000000000040a R09: 0000000000000065
      [    2.980623] R10: ffff88030ebb8f00 R11: ffffffff81416590 R12: ffff88031b488000
      [    2.980626] R13: ffff88031b4883a0 R14: ffffc900002879a8 R15: ffff880319099800
      [    2.980630] FS:  00007f475620d180(0000) GS:ffff880321ac0000(0000) knlGS:0000000000000000
      [    2.980633] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [    2.980636] CR2: 00007f9ef28018a0 CR3: 000000031b72c001 CR4: 00000000003606e0
      [    2.980639] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [    2.980642] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [    2.980645] Call Trace:
      [    2.980675]  i915_driver_load+0xb0e/0xdc0 [i915]
      [    2.980681]  ? kernfs_add_one+0xe7/0x130
      [    2.980709]  i915_pci_probe+0x46/0x60 [i915]
      [    2.980715]  pci_device_probe+0xd4/0x150
      [    2.980719]  really_probe+0x243/0x3b0
      [    2.980722]  driver_probe_device+0xba/0x100
      [    2.980726]  __driver_attach+0xe4/0x110
      [    2.980729]  ? driver_probe_device+0x100/0x100
      [    2.980733]  bus_for_each_dev+0x74/0xb0
      [    2.980736]  driver_attach+0x1e/0x20
      [    2.980739]  bus_add_driver+0x159/0x230
      [    2.980743]  ? 0xffffffffa0393000
      [    2.980746]  driver_register+0x70/0xc0
      [    2.980749]  ? 0xffffffffa0393000
      [    2.980753]  __pci_register_driver+0x57/0x60
      [    2.980780]  i915_init+0x55/0x58 [i915]
      [    2.980785]  do_one_initcall+0x4a/0x1c4
      [    2.980789]  ? do_init_module+0x27/0x210
      [    2.980793]  ? kmem_cache_alloc_trace+0x131/0x190
      [    2.980797]  do_init_module+0x60/0x210
      [    2.980800]  load_module+0x2063/0x22e0
      [    2.980804]  ? vfs_read+0x116/0x140
      [    2.980807]  ? vfs_read+0x116/0x140
      [    2.980811]  __do_sys_finit_module+0xbd/0x120
      [    2.980814]  ? __do_sys_finit_module+0xbd/0x120
      [    2.980818]  __x64_sys_finit_module+0x1a/0x20
      [    2.980821]  do_syscall_64+0x5a/0x110
      [    2.980824]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
      [    2.980826] RIP: 0033:0x7f4754e32879
      [    2.980828] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f7 45 2c 00 f7 d8 64 89 01 48
      [    2.980831] RSP: 002b:00007fff43fd97d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
      [    2.980834] RAX: ffffffffffffffda RBX: 0000559a44ca64f0 RCX: 00007f4754e32879
      [    2.980836] RDX: 0000000000000000 RSI: 00007f475599f4cd RDI: 0000000000000018
      [    2.980838] RBP: 00007f475599f4cd R08: 0000000000000000 R09: 0000000000000000
      [    2.980839] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000000000
      [    2.980841] R13: 0000559a44c92fd0 R14: 0000000000020000 R15: 0000000000000000
      [    2.980881] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
      [    2.980884] ---[ end trace 5eb47a76277d4731 ]---
      
      The cause of this appears to be due to the fact that if there's
      pre-existing display state that was set by the BIOS when i915 loads, it
      will attempt to perform a modeset before the driver is registered with
      userspace. Since this happens before the driver's registered with
      userspace, it's connectors are also unregistered and thus-states which
      would turn on DPMS on a connector end up getting rejected since the
      connector isn't registered.
      
      These bugs managed to get past Intel's CI partially due to the fact it
      never ran a full test on my patches for some reason, but also because
      all of the tests unload the GPU once before running. Since this bug is
      only really triggered when the drivers tries to perform a modeset before
      it's been fully registered with userspace when coming from whatever
      display configuration the firmware left us with, it likely would never
      have been picked up by CI in the first place.
      
      After some discussion with vsyrjala, we decided the best course of
      action would be to just move the unregistered connector checks out of
      update_connector_routing() and into drm_atomic_set_crtc_for_connector().
      The reason for this being that legacy modesetting isn't going to be
      expecting failures anywhere (at least this is the case with X), so
      ideally we want to ensure that any DPMS changes will still work even on
      unregistered connectors. Instead, we now only reject new modesets which
      would change the current CRTC assigned to an unregistered connector
      unless no new CRTC is being assigned to replace the connector's previous
      one.
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reported-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
      Fixes: 4d802739 ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
      Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
      Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
      Cc: stable@vger.kernel.org
      Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181009204424.21462-1-lyude@redhat.com
      b5d29843
    • Chris Wilson's avatar
      drm/i915: Inject a failure point when registering a connector · 41c43f9e
      Chris Wilson authored
      Check we can handle a late display load failure where the final act of
      registering the connector fails.
      Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Cc: Jani Nikula <jani.nikula@linux.intel.com>
      Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
      Cc: Daniel Vetter <daniel.vetter@intel.com>
      Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
      Reviewed-by: default avatarMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
      Acked-by: default avatarJani Nikula <jani.nikula@linux.intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181010123833.16797-1-chris@chris-wilson.co.uk
      41c43f9e
    • Jani Nikula's avatar
      drm/i915: move intel connector specific functions to intel_connector.c · 1c21348d
      Jani Nikula authored
      Now that we have intel_connector.c, move the connector specific
      functions from intel_display.c there. Fix a few checkpatch complaints
      while at it. No functional changes.
      Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
      Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181010075205.7713-2-jani.nikula@intel.com
      1c21348d
    • Jani Nikula's avatar
      drm/i915: rename intel_modes.c to intel_connector.c · 360fa66a
      Jani Nikula authored
      The common denominator here seems to be connector more than
      modes. Prepare for moving more connector functions to the same place. No
      functional changes.
      Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
      Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181010075205.7713-1-jani.nikula@intel.com
      360fa66a
    • Jani Nikula's avatar
      drm/i915: nuke the intel_lvds_connector · aee7d9be
      Jani Nikula authored
      For a while we carried lvds connector specific data in the lvds
      connector, but since commit 05c72e77 ("drm/i915: Nuke the LVDS lid
      notifier") we haven't needed it. Revert back to plain intel_connector.
      
      Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
      Reviewed-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
      Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181009210916.19578-1-jani.nikula@intel.com
      aee7d9be
    • Chris Wilson's avatar
      drm/i915: Show the DPCD read error inline · 65404c89
      Chris Wilson authored
      When reporting the DPCD dump through debugfs, show the errors inline
      where appropriate. If a read at one particular offset fails, report it.
      
      Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106371Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Reviewed-by: default avatarJani Nikula <jani.nikula@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181010081706.29931-1-chris@chris-wilson.co.uk
      65404c89
  5. 09 Oct, 2018 10 commits
  6. 08 Oct, 2018 8 commits