- 21 Jul, 2016 40 commits
-
-
Dan Carpenter authored
commit 38327424 upstream. If __key_link_begin() failed then "edit" would be uninitialized. I've added a check to fix that. This allows a random user to crash the kernel, though it's quite difficult to achieve. There are three ways it can be done as the user would have to cause an error to occur in __key_link(): (1) Cause the kernel to run out of memory. In practice, this is difficult to achieve without ENOMEM cropping up elsewhere and aborting the attempt. (2) Revoke the destination keyring between the keyring ID being looked up and it being tested for revocation. In practice, this is difficult to time correctly because the KEYCTL_REJECT function can only be used from the request-key upcall process. Further, users can only make use of what's in /sbin/request-key.conf, though this does including a rejection debugging test - which means that the destination keyring has to be the caller's session keyring in practice. (3) Have just enough key quota available to create a key, a new session keyring for the upcall and a link in the session keyring, but not then sufficient quota to create a link in the nominated destination keyring so that it fails with EDQUOT. The bug can be triggered using option (3) above using something like the following: echo 80 >/proc/sys/kernel/keys/root_maxbytes keyctl request2 user debug:fred negate @t The above sets the quota to something much lower (80) to make the bug easier to trigger, but this is dependent on the system. Note also that the name of the keyring created contains a random number that may be between 1 and 10 characters in size, so may throw the test off by changing the amount of quota used. Assuming the failure occurs, something like the following will be seen: kfree_debugcheck: out of range ptr 6b6b6b6b6b6b6b68h ------------[ cut here ]------------ kernel BUG at ../mm/slab.c:2821! ... RIP: 0010:[<ffffffff811600f9>] kfree_debugcheck+0x20/0x25 RSP: 0018:ffff8804014a7de8 EFLAGS: 00010092 RAX: 0000000000000034 RBX: 6b6b6b6b6b6b6b68 RCX: 0000000000000000 RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300 RBP: ffff8804014a7df0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8804014a7e68 R11: 0000000000000054 R12: 0000000000000202 R13: ffffffff81318a66 R14: 0000000000000000 R15: 0000000000000001 ... Call Trace: kfree+0xde/0x1bc assoc_array_cancel_edit+0x1f/0x36 __key_link_end+0x55/0x63 key_reject_and_link+0x124/0x155 keyctl_reject_key+0xb6/0xe0 keyctl_negate_key+0x10/0x12 SyS_keyctl+0x9f/0xe7 do_syscall_64+0x63/0x13a entry_SYSCALL64_slow_path+0x25/0x25 Fixes: f70e2e06 ('KEYS: Do preallocation for __key_link()') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Brian King authored
commit b39c9a66 upstream. This patch fixes an issue seen with an IBM 2145 (SVC) where, following an error injection test which results in paths going offline, when they came back online, the path would timeout the REPORT_LUNS issued during the scan. This timeout situation continued until retries were expired, resulting in falling back to a sequential LUN scan. Then, since the target responds with PQ=1, PDT=0 for all possible LUNs, due to the way the sequential LUN scan code works, we end up adding 512 LUNs for each target, when there is really only a small handful of LUNs that are actually present. This patch increases the timeout used on the REPORT_LUNS to 30 seconds. This patch solves the issue of 512 non existent LUNs showing up after this event. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Tony Luck authored
commit c44696ff upstream. Currently set to "6", but the reset of the code will dynamically allocate as needed. We need to go to "8" today, but drop the check completely to save doing this again when we need even larger numbers. Signed-off-by:
Tony Luck <tony.luck@intel.com> Acked-by:
Aristeu Rozanski <aris@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Kangjie Lu authored
commit 4116def2 upstream. The last field "flags" of object "minfo" is not initialized. Copying this object out may leak kernel stack data. Assign 0 to it to avoid leak. Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Gavin Shan authored
commit 3275c0c6 upstream. One timer, whose handler keeps reading on MMIO register for EEH core to detect error in time, is started when the PCI device driver is loaded. MMIO register can't be accessed during PE reset in EEH recovery. Otherwise, the unexpected recursive error is triggered. The timer isn't closed that time if the interface isn't brought up. So the unexpected recursive error is seen during EEH recovery when the interface is down. This avoids the unexpected recursive EEH error by closing the timer in qlge_io_error_detected() before EEH PE reset unconditionally. The timer is started unconditionally after EEH PE reset in qlge_io_resume(). Also, the timer should be closed unconditionally when the device is removed from the system permanently in qlge_io_error_detected(). Reported-by:
Shriya R. Kulkarni <shriyakul@in.ibm.com> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
Kangjie Lu authored
commit e4ec8cc8 upstream. The stack object “r1” has a total size of 32 bytes. Its field “event” and “val” both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kangjie Lu authored
commit 9a47e9cf upstream. The stack object “r1” has a total size of 32 bytes. Its field “event” and “val” both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by:
-
Kangjie Lu authored
commit cec8f96e upstream. The stack object “tread” has a total size of 32 bytes. Its field “event” and “val” both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by:
-
Takashi Iwai authored
commit d2c5cf88 upstream. This patch tries to address the still remaining issues in ALSA hrtimer driver: - Spurious use-after-free was detected in hrtimer callback - Incorrect rescheduling due to delayed start - WARN_ON() is triggered in hrtimer_forward() invoked in hrtimer callback The first issue happens only when the new timer is scheduled even while hrtimer is being closed. It's related with the second and third items; since ALSA timer core invokes hw.start callback during hrtimer interrupt, this may result in the explicit call of hrtimer_start(). Also, the similar problem is seen for the stop; ALSA timer core invokes hw.stop callback even in the hrtimer handler, too. Since we must not call the synced hrtimer_cancel() in such a context, it's just a hrtimer_try_to_cancel() call that doesn't properly work. Another culprit of the second and third items is the call of hrtimer_forward_now() before snd_timer_interrupt(). The timer->stick value may change during snd_timer_interrupt() call, but this possibility is ignored completely. For covering these subtle and messy issues, the following changes have been done in this patch: - A new flag, in_callback, is introduced in the private data to indicate that the hrtimer handler is being processed. - Both start and stop callbacks skip when called from (during) in_callback flag. - The hrtimer handler returns properly HRTIMER_RESTART and NORESTART depending on the running state now. - The hrtimer handler reprograms the expiry properly after snd_timer_interrupt() call, instead of before. - The close callback clears running flag and sets in_callback flag to block any further start/stop calls. Signed-off-by:
-
Jiri Slaby authored
ktime_divns was exported in upstream as a side-effect of commit 166afb64 (ktime: Sanitize ktime_to_us/ms conversion). But we do not want the commit given ktime is not nanoseconds in 3.12 yet. So we only export the function here as it is needed by upstream commit d2c5cf88 (ALSA: hrtimer: Handle start/stop more properly): ERROR: "ktime_divns" [sound/core/snd-hrtimer.ko] undefined! Signed-off-by:
-
Kangjie Lu authored
commit 681fef83 upstream. The stack object “ci” has a total size of 8 bytes. Its last 3 bytes are padding bytes which are not initialized and leaked to userland via “copy_to_user”. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
daniel authored
[ Upstream commit 0888d5f3 ] The bridge is falsly dropping ipv6 mulitcast packets if there is: 1. No ipv6 address assigned on the brigde. 2. No external mld querier present. 3. The internal querier enabled. When the bridge fails to build mld queries, because it has no ipv6 address, it slilently returns, but keeps the local querier enabled. This specific case causes confusing packet loss. Ipv6 multicast snooping can only work if: a) An external querier is present OR b) The bridge has an ipv6 address an is capable of sending own queries Otherwise it has to forward/flood the ipv6 multicast traffic, because snooping cannot work. This patch fixes the issue by adding a flag to the bridge struct that indicates that there is currently no ipv6 address assinged to the bridge and returns a false state for the local querier in __br_multicast_querier_exists(). Special thanks to Linus Lüssing. Fixes: d1d81d4c ("bridge: check return value of ipv6_dev_get_saddr()") Signed-off-by:
Daniel Danzberger <daniel@dd-wrt.com> Acked-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
-
James Bottomley authored
commit a621bac3 upstream. When SCSI was written, all commands coming from the filesystem (REQ_TYPE_FS commands) had data. This meant that our signal for needing to complete the command was the number of bytes completed being equal to the number of bytes in the request. Unfortunately, with the advent of flush barriers, we can now get zero length REQ_TYPE_FS commands, which confuse this logic because they satisfy the condition every time. This means they never get retried even for retryable conditions, like UNIT ATTENTION because we complete them early assuming they're done. Fix this by special casing the early completion condition to recognise zero length commands with errors and let them drop through to the retry code. Cc: stable@vger.kernel.org Reported-by:
Sebastian Parschauer <s.parschauer@gmx.de> Signed-off-by:
James E.J. Bottomley <jejb@linux.vnet.ibm.com> Tested-by:
Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by:
-
Christoph Hellwig authored
commit bc85dc50 upstream. By folding scsi_end_request into its only caller we can significantly clean up the completion logic. We can use simple goto labels now to only have a single place to finish or requeue command there instead of the previous convoluted logic. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Reviewed-by:
-
Kirill A. Shutemov authored
commit 4ac1c17b upstream. During page migrations UBIFS might get confused and the following assert triggers: [ 213.480000] UBIFS assert failed in ubifs_set_page_dirty at 1451 (pid 436) [ 213.490000] CPU: 0 PID: 436 Comm: drm-stress-test Not tainted 4.4.4-00176-geaa802524636-dirty #1008 [ 213.490000] Hardware name: Allwinner sun4i/sun5i Families [ 213.490000] [<c0015e70>] (unwind_backtrace) from [<c0012cdc>] (show_stack+0x10/0x14) [ 213.490000] [<c0012cdc>] (show_stack) from [<c02ad834>] (dump_stack+0x8c/0xa0) [ 213.490000] [<c02ad834>] (dump_stack) from [<c0236ee8>] (ubifs_set_page_dirty+0x44/0x50) [ 213.490000] [<c0236ee8>] (ubifs_set_page_dirty) from [<c00fa0bc>] (try_to_unmap_one+0x10c/0x3a8) [ 213.490000] [<c00fa0bc>] (try_to_unmap_one) from [<c00fadb4>] (rmap_walk+0xb4/0x290) [ 213.490000] [<c00fadb4>] (rmap_walk) from [<c00fb1bc>] (try_to_unmap+0x64/0x80) [ 213.490000] [<c00fb1bc>] (try_to_unmap) from [<c010dc28>] (migrate_pages+0x328/0x7a0) [ 213.490000] [<c010dc28>] (migrate_pages) from [<c00d0cb0>] (alloc_contig_range+0x168/0x2f4) [ 213.490000] [<c00d0cb0>] (alloc_contig_range) from [<c010ec00>] (cma_alloc+0x170/0x2c0) [ 213.490000] [<c010ec00>] (cma_alloc) from [<c001a958>] (__alloc_from_contiguous+0x38/0xd8) [ 213.490000] [<c001a958>] (__alloc_from_contiguous) from [<c001ad44>] (__dma_alloc+0x23c/0x274) [ 213.490000] [<c001ad44>] (__dma_alloc) from [<c001ae08>] (arm_dma_alloc+0x54/0x5c) [ 213.490000] [<c001ae08>] (arm_dma_alloc) from [<c035cecc>] (drm_gem_cma_create+0xb8/0xf0) [ 213.490000] [<c035cecc>] (drm_gem_cma_create) from [<c035cf20>] (drm_gem_cma_create_with_handle+0x1c/0xe8) [ 213.490000] [<c035cf20>] (drm_gem_cma_create_with_handle) from [<c035d088>] (drm_gem_cma_dumb_create+0x3c/0x48) [ 213.490000] [<c035d088>] (drm_gem_cma_dumb_create) from [<c0341ed8>] (drm_ioctl+0x12c/0x444) [ 213.490000] [<c0341ed8>] (drm_ioctl) from [<c0121adc>] (do_vfs_ioctl+0x3f4/0x614) [ 213.490000] [<c0121adc>] (do_vfs_ioctl) from [<c0121d30>] (SyS_ioctl+0x34/0x5c) [ 213.490000] [<c0121d30>] (SyS_ioctl) from [<c000f2c0>] (ret_fast_syscall+0x0/0x34) UBIFS is using PagePrivate() which can have different meanings across filesystems. Therefore the generic page migration code cannot handle this case correctly. We have to implement our own migration function which basically does a plain copy but also duplicates the page private flag. UBIFS is not a block device filesystem and cannot use buffer_migrate_page(). Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [rw: Massaged changelog, build fixes, etc...] Signed-off-by:
Richard Weinberger <richard@nod.at> Acked-by:
-
Richard Weinberger authored
commit 1118dce7 upstream. Export these symbols such that UBIFS can implement ->migratepage. Signed-off-by:
-
Will Deacon authored
commit 62453188 upstream. In a subsequent patch, pmd_mknotpresent will clear the valid bit of the pmd entry, resulting in a not-present entry from the hardware's perspective. Unfortunately, pmd_present simply checks for a non-zero pmd value and will therefore continue to return true even after a pmd_mknotpresent operation. Since pmd_mknotpresent is only used for managing huge entries, this is only an issue for the 3-level case. This patch fixes the 3-level pmd_present implementation to take into account the valid bit. For bisectability, the change is made before the fix to pmd_mknotpresent. [catalin.marinas@arm.com: comment update regarding pmd_mknotpresent patch] Fixes: 8d962507 ("ARM: mm: Transparent huge page support for LPAE systems.") Cc: Russell King <linux@armlinux.org.uk> Cc: Steve Capper <Steve.Capper@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Trond Myklebust authored
commit e547f262 upstream. Olga Kornievskaia reports that the following test fails to trigger an OPEN_DOWNGRADE on the wire, and only triggers the final CLOSE. fd0 = open(foo, RDRW) -- should be open on the wire for "both" fd1 = open(foo, RDONLY) -- should be open on the wire for "read" close(fd0) -- should trigger an open_downgrade read(fd1) close(fd1) The issue is that we're missing a check for whether or not the current state transitioned from an O_RDWR state as opposed to having transitioned from a combination of O_RDONLY and O_WRONLY. Reported-by:
Olga Kornievskaia <aglo@umich.edu> Fixes: cd9288ff ("NFSv4: Fix another bug in the close/open_downgrade code") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Al Viro authored
commit d20cb71d upstream. In "NFSv4: Move dentry instantiation into the NFSv4-specific atomic open code" unconditional d_drop() after the ->open_context() had been removed. It had been correct for success cases (there ->open_context() itself had been doing dcache manipulations), but not for error ones. Only one of those (ENOENT) got a compensatory d_drop() added in that commit, but in fact it should've been done for all errors. As it is, the case of O_CREAT non-exclusive open on a hashed negative dentry racing with e.g. symlink creation from another client ended up with ->open_context() getting an error and proceeding to call nfs_lookup(). On a hashed dentry, which would've instantly triggered BUG_ON() in d_materialise_unique() (or, these days, its equivalent in d_splice_alias()). Tested-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Borislav Petkov authored
commit 1ead852d upstream. Fix boot crash that triggers if this driver is built into a kernel and run on non-AMD systems. AMD northbridges users call amd_cache_northbridges() and it returns a negative value to signal that we weren't able to cache/detect any northbridges on the system. At least, it should do so as all its callers expect it to do so. But it does return a negative value only when kmalloc() fails. Fix it to return -ENODEV if there are no NBs cached as otherwise, amd_nb users like amd64_edac, for example, which relies on it to know whether it should load or not, gets loaded on systems like Intel Xeons where it shouldn't. Reported-and-tested-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1466097230-5333-2-git-send-email-bp@alien8.de Link: https://lkml.kernel.org/r/5761BEB0.9000807@cybernetics.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Masami Hiramatsu authored
commit dcfc4724 upstream. Fix kprobe_fault_handler() to clear the TF (trap flag) bit of the flags register in the case of a fault fixup on single-stepping. If we put a kprobe on the instruction which caused a page fault (e.g. actual mov instructions in copy_user_*), that fault happens on the single-stepping buffer. In this case, kprobes resets running instance so that the CPU can retry execution on the original ip address. However, current code forgets to reset the TF bit. Since this fault happens with TF bit set for enabling single-stepping, when it retries, it causes a debug exception and kprobes can not handle it because it already reset itself. On the most of x86-64 platform, it can be easily reproduced by using kprobe tracer. E.g. # cd /sys/kernel/debug/tracing # echo p copy_user_enhanced_fast_string+5 > kprobe_events # echo 1 > events/kprobes/enable And you'll see a kernel panic on do_debug(), since the debug trap is not handled by kprobes. To fix this problem, we just need to clear the TF bit when resetting running kprobe. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by:
Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: systemtap@sourceware.org Link: http://lkml.kernel.org/r/20160611140648.25885.37482.stgit@devbox [ Updated the comments. ] Signed-off-by:
-
H. Peter Anvin authored
commit 9c77679c upstream. For newer versions of Syslinux, we need ldlinux.c32 in addition to isolinux.bin to reside on the boot disk, so if the latter is found, copy it, too, to the isoimage tree. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Alan Stern authored
commit 7e8b3dfe upstream. The HOSTPC extension registers found in some EHCI implementations form a variable-length array, with one element for each port. Therefore the hostpc field in struct ehci_regs should be declared as a zero-length array, not a single-element array. This fixes a problem reported by UBSAN. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Tested-by:
-
Gavin Shan authored
commit 8a934efe upstream. In commit 8445a87f "powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism", the PE address was replaced with the PCI config address in order to remove dependency on EEH. According to PAPR spec, firmware (pHyp or QEMU) should accept "xxBBSSxx" format PCI config address, not "xxxxBBSS" provided by the patch. Note that "BB" is PCI bus number and "SS" is the combination of slot and function number. This fixes the PCI address passed to DDW RTAS calls. Fixes: 8445a87f ("powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism") Reported-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Guilherme G. Piccoli authored
commit 8445a87f upstream. Commit 39baadbf ("powerpc/eeh: Remove eeh information from pci_dn") changed the pci_dn struct by removing its EEH-related members. As part of this clean-up, DDW mechanism was modified to read the device configuration address from eeh_dev struct. As a consequence, now if we disable EEH mechanism on kernel command-line for example, the DDW mechanism will fail, generating a kernel oops by dereferencing a NULL pointer (which turns to be the eeh_dev pointer). This patch just changes the configuration address calculation on DDW functions to a manual calculation based on pci_dn members instead of using eeh_dev-based address. No functional changes were made. This was tested on pSeries, both in PHyp and qemu guest. Fixes: 39baadbf ("powerpc/eeh: Remove eeh information from pci_dn") Reviewed-by:
-
Jason Gunthorpe authored
commit 8c5122e4 upstream. When this code was reworked for IBoE support the order of assignments for the sl_tclass_flowlabel got flipped around resulting in TClass & FlowLabel being permanently set to 0 in the packet headers. This breaks IB routers that rely on these headers, but only affects kernel users - libmlx4 does this properly for user space. Fixes: fa417f7b ("IB/mlx4: Add support for IBoE") Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Martin Willi authored
commit 62397da5 upstream. A wmediumd that does not send this attribute causes a NULL pointer dereference, as the attribute is accessed even if it does not exist. The attribute was required but never checked ever since userspace frame forwarding has been introduced. The issue gets more problematic once we allow wmediumd registration from user namespaces. Fixes: 7882513b ("mac80211_hwsim driver support userspace frame tx/rx") Signed-off-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Bob Copeland authored
commit fe7a7c57 upstream. Currently, the mesh paths associated with a nexthop station are cleaned up in the following code path: __sta_info_destroy_part1 synchronize_net() __sta_info_destroy_part2 -> cleanup_single_sta -> mesh_sta_cleanup -> mesh_plink_deactivate -> mesh_path_flush_by_nexthop However, there are a couple of problems here: 1) the paths aren't flushed at all if the MPM is running in userspace (e.g. when using wpa_supplicant or authsae) 2) there is no synchronize_rcu between removing the path and readers accessing the nexthop, which means the following race is possible: CPU0 CPU1 ~~~~ ~~~~ sta_info_destroy_part1() synchronize_net() rcu_read_lock() mesh_nexthop_resolve() mpath = mesh_path_lookup() [...] -> mesh_path_flush_by_nexthop() sta = rcu_dereference( mpath->next_hop) kfree(sta) access sta <-- CRASH Fix both of these by unconditionally flushing paths before destroying the sta, and by adding a synchronize_net() after path flush to ensure no active readers can still dereference the sta. Fixes this crash: [ 348.529295] BUG: unable to handle kernel paging request at 00020040 [ 348.530014] IP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] *pde = 00000000 [ 348.530014] Oops: 0000 [#1] PREEMPT [ 348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ] [ 348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G O 4.6.0-rc5-wt=V1 #1 [ 348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014 [ 348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000 [ 348.530014] EIP: 0060:[<f929245d>] EFLAGS: 00010246 CPU: 0 [ 348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008 [ 348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40 [ 348.530014] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690 [ 348.530014] Stack: [ 348.530014] 00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0 [ 348.530014] f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320 [ 348.530014] f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1 [ 348.530014] Call Trace: [ 348.530014] [<f9291d80>] mesh_nexthop_lookup+0xbb/0xc8 [mac80211] [ 348.530014] [<f9291dc1>] mesh_nexthop_resolve+0x34/0xd8 [mac80211] [ 348.530014] [<f9277f6f>] ieee80211_xmit+0x92/0xc1 [mac80211] [ 348.530014] [<f9278dd1>] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211] [ 348.530014] [<c04df012>] ? sch_direct_xmit+0xd7/0x1b3 [ 348.530014] [<c022a8c6>] ? __local_bh_enable_ip+0x5d/0x7b [ 348.530014] [<f956870c>] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4] [ 348.530014] [<f957e036>] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat] [ 348.530014] [<c04c6f45>] ? netif_skb_features+0x14d/0x30a [ 348.530014] [<f9278e10>] ieee80211_subif_start_xmit+0xa/0xe [mac80211] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f91bfc7a>] batadv_send_skb_packet+0xd6/0xec [batman_adv] [ 348.530014] [<f91bfdc4>] batadv_send_unicast_skb+0x15/0x4a [batman_adv] [ 348.530014] [<f91b5938>] batadv_dat_send_data+0x27e/0x310 [batman_adv] [ 348.530014] [<f91c30b5>] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv] [ 348.530014] [<f91b63f3>] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv] [ 348.530014] [<f91c0cd9>] batadv_interface_tx+0x206/0x385 [batman_adv] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<f80cbd2a>] ? igb_xmit_frame+0x57/0x72 [igb] [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f843a326>] br_dev_queue_push_xmit+0xeb/0xfb [bridge] [ 348.530014] [<f843a35f>] br_forward_finish+0x29/0x74 [bridge] [ 348.530014] [<f843a23b>] ? deliver_clone+0x3b/0x3b [bridge] [ 348.530014] [<f843a714>] __br_forward+0x89/0xe7 [bridge] [ 348.530014] [<f843a336>] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge] [ 348.530014] [<f843a234>] deliver_clone+0x34/0x3b [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843a66d>] br_flood+0x77/0x95 [bridge] [ 348.530014] [<f843a809>] br_flood_forward+0x13/0x1a [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843b877>] br_handle_frame_finish+0x392/0x3db [bridge] [ 348.530014] [<c04e9b2b>] ? nf_iterate+0x2b/0x6b [ 348.530014] [<f843baa6>] br_handle_frame+0x1e6/0x240 [bridge] [ 348.530014] [<f843b4e5>] ? br_handle_local_finish+0x6a/0x6a [bridge] [ 348.530014] [<c04c4ba0>] __netif_receive_skb_core+0x43a/0x66b [ 348.530014] [<f843b8c0>] ? br_handle_frame_finish+0x3db/0x3db [bridge] [ 348.530014] [<c023cea4>] ? resched_curr+0x19/0x37 [ 348.530014] [<c0240707>] ? check_preempt_wakeup+0xbf/0xfe [ 348.530014] [<c0255dec>] ? ktime_get_with_offset+0x5c/0xfc [ 348.530014] [<c04c4fc1>] __netif_receive_skb+0x47/0x55 [ 348.530014] [<c04c57ba>] netif_receive_skb_internal+0x40/0x5a [ 348.530014] [<c04c61ef>] napi_gro_receive+0x3a/0x94 [ 348.530014] [<f80ce8d5>] igb_poll+0x6fd/0x9ad [igb] [ 348.530014] [<c0242bd8>] ? swake_up_locked+0x14/0x26 [ 348.530014] [<c04c5d29>] net_rx_action+0xde/0x250 [ 348.530014] [<c022a743>] __do_softirq+0x8a/0x163 [ 348.530014] [<c022a6b9>] ? __hrtimer_tasklet_trampoline+0x19/0x19 [ 348.530014] [<c021100f>] do_softirq_own_stack+0x26/0x2c [ 348.530014] <IRQ> [ 348.530014] [<c022a957>] irq_exit+0x31/0x6f [ 348.530014] [<c0210eb2>] do_IRQ+0x8d/0xa0 [ 348.530014] [<c058152c>] common_interrupt+0x2c/0x40 [ 348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005 [ 348.530014] EIP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40 [ 348.530014] CR2: 0000000000020040 [ 348.530014] ---[ end trace 48556ac26779732e ]--- [ 348.530014] Kernel panic - not syncing: Fatal exception in interrupt [ 348.530014] Kernel Offset: disabled Reported-by:
Fred Veldini <fred.veldini@gmail.com> Tested-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Andrew Goodbody authored
commit f3eec0cf upstream. shared_fifo endpoints would only get a previous tx state cleared out, the rx state was only cleared for non shared_fifo endpoints Change this so that the rx state is cleared for all endpoints. This addresses an issue that resulted in rx packets being dropped silently. Signed-off-by:
Andrew Goodbody <andrew.goodbody@cambrionix.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Andrew Goodbody authored
commit 7b2c17f8 upstream. Ensure that the endpoint is stopped by clearing REQPKT before clearing DATAERR_NAKTIMEOUT before rotating the queue on the dedicated bulk endpoint. This addresses an issue where a race could result in the endpoint receiving data before it was reprogrammed resulting in a warning about such data from musb_rx_reinit before it was thrown away. The data thrown away was a valid packet that had been correctly ACKed which meant the host and device got out of sync. Signed-off-by:
-
Hans de Goede authored
commit 32cb0b37 upstream. The Acer C120 LED Projector is a USB-3 connected pico projector which takes both its power and video data from USB-3. In combination with some hubs this device does not play well with lpm, so disable lpm for it. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Feng Tang authored
[ Upstream commit 881d0327 ] Note: This is a verified backported patch for stable 4.4 kernel, and it could also be applied to 4.3/4.2/4.1/3.18/3.16 There is a problem with alx devices, that the network link will be lost in 1-5 minutes after the device is up. >From debugging without datasheet, we found the error always happen when the DMA RX address is set to 0x....fc0, which is very likely to be a HW/silicon problem. This patch will apply rx skb with 64 bytes longer space, and if the allocated skb has a 0x...fc0 address, it will use skb_resever(skb, 64) to advance the address, so that the RX overflow can be avoided. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761Signed-off-by:
Feng Tang <feng.tang@intel.com> Suggested-by:
Eric Dumazet <edumazet@google.com> Tested-by:
Ole Lukoie <olelukoie@mail.ru> Signed-off-by:
-
Tom Goff authored
[ Upstream commit 70a0dec4 ] This fixes wrong-interface signaling on 32-bit platforms for entries created when jiffies > 2^31 + MFC_ASSERT_THRESH. Signed-off-by:
Tom Goff <thomas.goff@ll.mit.edu> Signed-off-by:
-
Simon Horman authored
[ Upstream commit d5d8760b ] Since 32b8a8e5 ("sit: add IPv4 over IPv4 support") ipip6_err() may be called for packets whose IP protocol is IPPROTO_IPIP as well as those whose IP protocol is IPPROTO_IPV6. In the case of IPPROTO_IPIP packets the correct protocol value is not passed to ipv4_update_pmtu() or ipv4_redirect(). This patch resolves this problem by using the IP protocol of the packet rather than a hard-coded value. This appears to be consistent with the usage of the protocol of a packet by icmp_socket_deliver() the caller of ipip6_err(). I was able to exercise the redirect case by using a setup where an ICMP redirect was received for the destination of the encapsulated packet. However, it appears that although incorrect the protocol field is not used in this case and thus no problem manifests. On inspection it does not appear that a problem will manifest in the fragmentation needed/update pmtu case either. In short I believe this is a cosmetic fix. None the less, the use of IPPROTO_IPV6 seems wrong and confusing. Reviewed-by:
Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Linus Walleij authored
commit 19ced623 upstream. The hash buffer is really HASH_BLOCK_SIZE bytes, someone must have thought that memmove takes n*u32 words by mistake. Tests work as good/bad as before after this patch. Cc: Joakim Bech <joakim.bech@linaro.org> Reported-by:
David Binderman <linuxdev.baldrick@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Florian Westphal authored
commit d7591f0c upstream The three variants use same copy&pasted code, condense this into a helper and use that. Make sure info.name is 0-terminated. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Bernhard Thaler authored
commit d26e2c9f upstream. This partially reverts commit 1086bbe9 ("netfilter: ensure number of counters is >0 in do_replace()") in net/bridge/netfilter/ebtables.c. Setting rules with ebtables does not work any more with 1086bbe9 place. There is an error message and no rules set in the end. e.g. ~# ebtables -t nat -A POSTROUTING --src 12:34:56:78:9a:bc -j DROP Unable to update the kernel. Two possible causes: 1. Multiple ebtables programs were executing simultaneously. The ebtables userspace tool doesn't by default support multiple ebtables programs running Reverting the ebtables part of 1086bbe9 makes this work again. Signed-off-by:
Bernhard Thaler <bernhard.thaler@wvnet.at> Signed-off-by:
-
Florian Westphal authored
commit 09d96860 upstream. This looks like refactoring, but its also a bug fix. Problem is that the compat path (32bit iptables, 64bit kernel) lacks a few sanity tests that are done in the normal path. For example, we do not check for underflows and the base chain policies. While its possible to also add such checks to the compat path, its more copy&pastry, for instance we cannot reuse check_underflow() helper as e->target_offset differs in the compat case. Other problem is that it makes auditing for validation errors harder; two places need to be checked and kept in sync. At a high level 32 bit compat works like this: 1- initial pass over blob: validate match/entry offsets, bounds checking lookup all matches and targets do bookkeeping wrt. size delta of 32/64bit structures assign match/target.u.kernel pointer (points at kernel implementation, needed to access ->compatsize etc.) 2- allocate memory according to the total bookkeeping size to contain the translated ruleset 3- second pass over original blob: for each entry, copy the 32bit representation to the newly allocated memory. This also does any special match translations (e.g. adjust 32bit to 64bit longs, etc). 4- check if ruleset is free of loops (chase all jumps) 5-first pass over translated blob: call the checkentry function of all matches and targets. The alternative implemented by this patch is to drop steps 3&4 from the compat process, the translation is changed into an intermediate step rather than a full 1:1 translate_table replacement. In the 2nd pass (step #3), change the 64bit ruleset back to a kernel representation, i.e. put() the kernel pointer and restore ->u.user.name . This gets us a 64bit ruleset that is in the format generated by a 64bit iptables userspace -- we can then use translate_table() to get the 'native' sanity checks. This has two drawbacks: 1. we re-validate all the match and target entry structure sizes even though compat translation is supposed to never generate bogus offsets. 2. we put and then re-lookup each match and target. THe upside is that we get all sanity tests and ruleset validations provided by the normal path and can remove some duplicated compat code. iptables-restore time of autogenerated ruleset with 300k chains of form -A CHAIN0001 -m limit --limit 1/s -j CHAIN0002 -A CHAIN0002 -m limit --limit 1/s -j CHAIN0003 shows no noticeable differences in restore times: old: 0m30.796s new: 0m31.521s 64bit: 0m25.674s Signed-off-by:
-
Dave Jones authored
commit 1086bbe9 upstream. After improving setsockopt() coverage in trinity, I started triggering vmalloc failures pretty reliably from this code path: warn_alloc_failed+0xe9/0x140 __vmalloc_node_range+0x1be/0x270 vzalloc+0x4b/0x50 __do_replace+0x52/0x260 [ip_tables] do_ipt_set_ctl+0x15d/0x1d0 [ip_tables] nf_setsockopt+0x65/0x90 ip_setsockopt+0x61/0xa0 raw_setsockopt+0x16/0x60 sock_common_setsockopt+0x14/0x20 SyS_setsockopt+0x71/0xd0 It turns out we don't validate that the num_counters field in the struct we pass in from userspace is initialized. The same problem also exists in ebtables, arptables, ipv6, and the compat variants. Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Florian Westphal authored
commit 0188346f upstream. Always returned 0. Signed-off-by:
-
