This should cause no functional change; merely make there only be one
 design of xmit_more handling to understand.  As with the EF10/Siena
 version, we set tx_queue->xmit_pending when we queue up a TX, and
 clear it when we ring the doorbell (in ef100_notify_tx_desc).
While we're at it, make ef100_notify_tx_desc static since nothing
 outside of ef100_tx.c uses it.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of using efx_tx_queue_partner(), which relies on the assumption
 that tx_queues_per_channel is 2, efx_tx_send_pending() iterates over
 txqs with efx_for_each_channel_tx_queue().
We unconditionally set tx_queue->xmit_pending (renamed from
 xmit_more_available), then condition on xmit_more for the call to
 efx_tx_send_pending(), which will clear xmit_pending.  Thus, after an
 xmit_more TX, the doorbell is un-rung and xmit_pending is true.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.

Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe64 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull s390 fixes from Vasily Gorbik:

 - Fix GENERIC_LOCKBREAK dependency on PREEMPTION in Kconfig broken
   because of a typo

 - Update defconfigs

* tag 's390-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  s390: fix GENERIC_LOCKBREAK dependency typo in Kconfig

Pull arm64 fixes from Catalin Marinas:

 - Fix the loading of modules built with binutils-2.35. This version
   produces writable and executable .text.ftrace_trampoline section
   which is rejected by the kernel.

 - Remove the exporting of cpu_logical_map() as the Tegra driver has now
   been fixed and no longer uses this function.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/module: set trampoline section flags regardless of CONFIG_DYNAMIC_FTRACE
  arm64: Remove exporting cpu_logical_map symbol

Pull MIPS fixes from Thomas Bogendoerfer:
 "A few MIPS fixes:

   - fallthrough fallout fix

   - BMIPS fixes

   - MSA fix to avoid leaking MSA register contents

   - Loongson perf and cpu feature fix

   - SNI interrupt fix"

* tag 'mips_fixes_5.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: SNI: Fix SCSI interrupt
  MIPS: add missing MSACSR and upper MSA initialization
  MIPS: perf: Fix wrong check condition of Loongson event IDs
  mips/oprofile: Fix fallthrough placement
  MIPS: Loongson64: Remove unnecessary inclusion of boot_param.h
  MIPS: BMIPS: Also call bmips_cpu_setup() for secondary cores
  MIPS: mm: BMIPS5000 has inclusive physical caches
  MIPS: Loongson64: Do not override watch and ejtag feature

Merge tag 'kbuild-fixes-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix documents

 - fix warning in 'make localmodconfig'

* tag 'kbuild-fixes-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: remove redundant assignment prompt = prompt
  kbuild: Documentation: clean up makefiles.rst
  kconfig: streamline_config.pl: check defined(ENV variable) before using it
  Documentation/llvm: Improve formatting of commands, variables, and arguments

Pull power management fixes from Rafael Wysocki:
 "These fix reference counting in the operating performance points (OPP)
  framework and address a few intel_pstate driver issues, mostly related
  to switching driver operation modes and similar with hardware-managed
  P-states (HWP) enabled.

  Specifics:

   - Fix reference counting of operating performance points (OPP) tables
     (Viresh Kumar).

   - Address intel_pstate driver interface issues, mostly related to
     switching operation modes and handling CPU offline and online and
     system-wide suspend/resume with hardware-managed P-states (HWP)
     enabled (Rafael Wysocki).

   - Fix the maximum frequency computation in the intel_pstate driver
     with turbo P-states disabled by the platform firmware and HWP
     enabled (Francisco Jerez)"

* tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
  cpufreq: intel_pstate: Free memory only when turning off
  cpufreq: intel_pstate: Add ->offline and ->online callbacks
  cpufreq: intel_pstate: Tweak the EPP sysfs interface
  cpufreq: intel_pstate: Update cached EPP in the active mode
  cpufreq: intel_pstate: Refuse to turn off with HWP enabled
  opp: Don't drop reference for an OPP table that was never parsed

Pull libata fixes from Jens Axboe:

 - improve Sandisks ATA_HORKAGE on NCQ (Tejun)

 - link printk cleanup (Xu)

* tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
  libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks
  ata: ahci: use ata_link_info() instead of ata_link_printk()

Pull block fixes from Jens Axboe:
 "A bit larger than usual this week, mostly due to the NVMe fixes
  arriving late for -rc3 and hence didn't make last weeks pull request.

   - NVMe:
        - instance leak and io boundary fixes from Keith
        - fc locking fix from Christophe
        - various tcp/rdma reset during traffic fixes from Sagi
        - pci use-after-free fix from Tong
        - tcp target null deref fix from Ziye

   - Locking fix for partition removal (Christoph)

   - Ensure bdi->io_pages is always set (me)

   - Fixup for hd struct reference (Ming)

   - Fix for zero length bvecs (Ming)

   - Two small blk-iocost fixes (Tejun)"

* tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
  block: allow for_each_bvec to support zero len bvec
  blk-stat: make q->stats->lock irqsafe
  blk-iocost: ioc_pd_free() shouldn't assume irq disabled
  block: fix locking in bdev_del_partition
  block: release disk reference in hd_struct_free_work
  block: ensure bdi->io_pages is always initialized
  nvme-pci: cancel nvme device request before disabling
  nvme: only use power of two io boundaries
  nvme: fix controller instance leak
  nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
  nvme: Fix NULL dereference for pci nvme controllers
  nvme-rdma: fix reset hang if controller died in the middle of a reset
  nvme-rdma: fix timeout handler
  nvme-rdma: serialize controller teardown sequences
  nvme-tcp: fix reset hang if controller died in the middle of a reset
  nvme-tcp: fix timeout handler
  nvme-tcp: serialize controller teardown sequences
  nvme: have nvme_wait_freeze_timeout return if it timed out
  nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
  nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu

Pull io_uring fixes from Jens Axboe:

 - EAGAIN with O_NONBLOCK retry fix

 - Two small fixes for registered files (Jiufei)

* tag 'io_uring-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
  io_uring: no read/write-retry on -EAGAIN error and O_NONBLOCK marked file
  io_uring: set table->files[i] to NULL when io_sqe_file_register failed
  io_uring: fix removing the wrong file in __io_sqe_files_update()

Pull thermal fixes from Daniel Lezcano:

 - Fix bogus thermal shutdowns for omap4430 where bogus values resulting
   from an incorrect ADC conversion are too high and fire an emergency
   shutdown (Tony Lindgren)

 - Don't suppress negative temp for qcom spmi as they are valid and
   userspace needs them (Veera Vegivada)

 - Fix use-after-free in thermal_zone_device_unregister reported by
   Kasan (Dmitry Osipenko)

* tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal: core: Fix use-after-free in thermal_zone_device_unregister()
  thermal: qcom-spmi-temp-alarm: Don't suppress negative temp
  thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430

Pull dmaengine fixes from Vinod Koul:
 "A couple of core fixes and odd driver fixes for dmaengine subsystem:

  Core:
   - drop ACPI CSRT table reference after using it
   - fix of_dma_router_xlate() error handling

  Drivers fixes in idxd, at_hdmac, pl330, dw-edma and jz478"

* tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0
  drivers/dma/dma-jz4780: Fix race condition between probe and irq handler
  dmaengine: dw-edma: Fix scatter-gather address calculation
  dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sg
  dmaengine: pl330: Fix burst length if burst size is smaller than bus width
  dmaengine: at_hdmac: add missing kfree() call in at_dma_xlate()
  dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()
  dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate()
  dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling
  dmaengine: idxd: reset states after device disable or reset
  dmaengine: acpi: Put the CSRT table after using it

Pull sound fixes from Takashi Iwai:
 "A collection of small changes, nothing intrusive:

   - remaining tasklet API conversions, now all sound stuff have been
     converted

   - a few HD-audio and USB-audio quirks and minor fixes

   - FireWire Tascam and Digi00xx fixes

   - drop a kernel WARNING from PCM OSS for syzkaller"

* tag 'sound-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
  ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th Gen
  ALSA: hda: use consistent HDAudio spelling in comments/docs
  ALSA: hda: add dev_dbg log when driver is not selected
  ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled
  ALSA: hda: hdmi - add Rocketlake support
  ALSA: ua101: convert tasklets to use new tasklet_setup() API
  ALSA: usb-audio: convert tasklets to use new tasklet_setup() API
  ASoC: txx9: convert tasklets to use new tasklet_setup() API
  ASoC: siu: convert tasklets to use new tasklet_setup() API
  ASoC: fsl_esai: convert tasklets to use new tasklet_setup() API
  ALSA: hdsp: convert tasklets to use new tasklet_setup() API
  ALSA: riptide: convert tasklets to use new tasklet_setup() API
  ALSA: pci/asihpi: convert tasklets to use new tasklet_setup() API
  ALSA: firewire: convert tasklets to use new tasklet_setup() API
  ALSA: core: convert tasklets to use new tasklet_setup() API
  ALSA: pcm: oss: Remove superfluous WARN_ON() for mulaw sanity check
  ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO
  ALSA: hda/hdmi: always check pin power status in i915 pin fixup
  ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion NT950XCJ-X716A
  ALSA: usb-audio: Add basic capture support for Pioneer DJ DJM-250MK2
  ...

Pull drm fixes from Dave Airlie:
 "Not much going on this week, nouveau has a display hw bug workaround,
  amdgpu has some PM fixes and CIK regression fixes, one single radeon
  PLL fix, and a couple of i915 display fixes.

  amdgpu:
   - Fix for 32bit systems
   - SW CTF fix
   - Update for Sienna Cichlid
   - CIK bug fixes

  radeon:
   - PLL fix

  i915:
   - Clang build warning fix
   - HDCP fixes

  nouveau:
   - display fixes"

* tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bug
  drm/nouveau/kms/nv50-gp1xx: disable notifies again after core update
  drm/nouveau/kms/nv50-: add some whitespace before debug message
  drm/nouveau/kms/gv100-: Include correct push header in crcc37d.c
  drm/radeon: Prefer lower feedback dividers
  drm/amdgpu: Fix bug in reporting voltage for CIK
  drm/amdgpu: Specify get_argument function for ci_smu_funcs
  drm/amd/pm: enable MP0 DPM for sienna_cichlid
  drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting
  drm/amd/pm: fix is_dpm_running() run error on 32bit system
  drm/i915: Clear the repeater bit on HDCP disable
  drm/i915: Fix sha_text population code
  drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_state

Using tp_reserve to calculate netoff can overflow as
tp_reserve is unsigned int and netoff is unsigned short.

This may lead to macoff receving a smaller value then
sizeof(struct virtio_net_hdr), and if po->has_vnet_hdr
is set, an out-of-bounds write will occur when
calling virtio_net_hdr_from_skb.

The bug is fixed by converting netoff to unsigned int
and checking if it exceeds USHRT_MAX.

This addresses CVE-2020-14386

Fixes: 8913336a ("packet: add PACKET_RESERVE sockopt")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge emailed patches from Peter Xu:
 "This is a small series that I picked up from Linus's suggestion to
  simplify cow handling (and also make it more strict) by checking
  against page refcounts rather than mapcounts.

  This makes uffd-wp work again (verified by running upmapsort)"

Note: this is horrendously bad timing, and making this kind of
fundamental vm change after -rc3 is not at all how things should work.
The saving grace is that it really is a a nice simplification:

 8 files changed, 29 insertions(+), 120 deletions(-)

The reason for the bad timing is that it turns out that commit
17839856 ("gup: document and work around 'COW can break either way'
issue" broke not just UFFD functionality (as Peter noticed), but Mikulas
Patocka also reports that it caused issues for strace when running in a
DAX environment with ext4 on a persistent memory setup.

And we can't just revert that commit without re-introducing the original
issue that is a potential security hole, so making COW stricter (and in
the process much simpler) is a step to then undoing the forced COW that
broke other uses.

Link: https://lore.kernel.org/lkml/alpine.LRH.2.02.2009031328040.6929@file01.intranet.prod.int.rdu2.redhat.com/

* emailed patches from Peter Xu <peterx@redhat.com>:
  mm: Add PGREUSE counter
  mm/gup: Remove enfornced COW mechanism
  mm/ksm: Remove reuse_ksm_page()
  mm: do_wp_page() simplification

* pm-cpufreq:
  cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
  cpufreq: intel_pstate: Free memory only when turning off
  cpufreq: intel_pstate: Add ->offline and ->online callbacks
  cpufreq: intel_pstate: Tweak the EPP sysfs interface
  cpufreq: intel_pstate: Update cached EPP in the active mode
  cpufreq: intel_pstate: Refuse to turn off with HWP enabled

This accounts for wp_page_reuse() case, where we reused a page for COW.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With the more strict (but greatly simplified) page reuse logic in
do_wp_page(), we can safely go back to the world where cow is not
enforced with writes.

This essentially reverts commit 17839856 ("gup: document and work
around 'COW can break either way' issue").  There are some context
differences due to some changes later on around it:

  2170ecfa ("drm/i915: convert get_user_pages() --> pin_user_pages()", 2020-06-03)
  376a34ef ("mm/gup: refactor and de-duplicate gup_fast() code", 2020-06-03)

Some lines moved back and forth with those, but this revert patch should
have striped out and covered all the enforced cow bits anyways.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove the function as the last reference has gone away with the do_wp_page()
changes.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

How about we just make sure we're the only possible valid user fo the
page before we bother to reuse it?

Simplify, simplify, simplify.

And get rid of the nasty serialization on the page lock at the same time.

[peterx: add subject prefix]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GCOV built with GCC 10 doesn't initialize n_function variable.  This
produces different kernel panics as was seen by Colin in Ubuntu and me
in FC 32.

As a workaround, let's disable GCOV build for broken GCC 10 version.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891288
Link: https://lore.kernel.org/lkml/20200827133932.3338519-1-leon@kernel.org
Link: https://lore.kernel.org/lkml/CAHk-=whbijeSdSvx-Xcr0DPMj0BiwhJ+uiNnDSVZcr_h_kg7UA@mail.gmail.com/
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init_stat() returns 0 on success, same as vfs_lstat().  When it replaced
vfs_lstat(), the '!' was dropped.

Fixes: 716308a5 ("init: add an init_stat helper")
Signed-off-by: Barret Rhoden <brho@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The user-after-free bug in thermal_zone_device_unregister() is reported by
KASAN. It happens because struct thermal_zone_device is released during of
device_unregister() invocation, and hence the "tz" variable shouldn't be
touched by thermal_notify_tz_delete(tz->id).

Fixes: 55cdf0a2 ("thermal: core: Add notifications call in the framework")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200817235854.26816-1-digetx@gmail.com

Currently driver is suppressing the negative temperature
readings from the vadc. Consumers of the thermal zones need
to read the negative temperature too. Don't suppress the
readings.

Fixes: c610afaa ("thermal: Add QPNP PMIC temperature alarm driver")
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/944856eb819081268fab783236a916257de120e4.1596040416.git.gurus@codeaurora.org

We can sometimes get bogus thermal shutdowns on omap4430 at least with
droid4 running idle with a battery charger connected:

thermal thermal_zone0: critical temperature reached (143 C), shutting down

Dumping out the register values shows we can occasionally get a 0x7f value
that is outside the TRM listed values in the ADC conversion table. And then
we get a normal value when reading again after that. Reading the register
multiple times does not seem help avoiding the bogus values as they stay
until the next sample is ready.

Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we
should have values from 13 to 107 listed with a total of 95 values. But
looking at the omap4430_adc_to_temp array, the values are off, and the
end values are missing. And it seems that the 4430 ADC table is similar
to omap3630 rather than omap4460.

Let's fix the issue by using values based on the omap3630 table and just
ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has
the missing values added while the TRM table only shows every second
value.

Note that sometimes the ADC register values within the valid table can
also be way off for about 1 out of 10 values. But it seems that those
just show about 25 C too low values rather than too high values. So those
do not cause a bogus thermal shutdown.

Fixes: 1a31270e ("staging: omap-thermal: add OMAP4 data structures")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com

Merge tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools fixes from Arnaldo Carvalho de Melo:

 - Use uintptr_t when casting numbers to pointers

 - Keep output expected by 3rd parties: Turn off summary for interval
   mode by default.

 - BPF is in kernel space, make sure do_validate_kcore_modules() knows
   about that.

 - Explicitly call out event modifiers in the documentation.

 - Fix jevents() allocation of space for regular expressions.

 - Address libtraceevent build warnings on 32-bit arches.

 - Fix checking of functions returns using ERR_PTR() in 'perf bench'.

* tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Add bpf image check to __map__is_kmodule
  perf record/stat: Explicitly call out event modifiers in the documentation
  perf bench: The do_run_multi_threaded() function must use IS_ERR(perf_session__new())
  perf stat: Turn off summary for interval mode by default
  libtraceevent: Fix build warning on 32-bit arches
  perf jevents: Fix suspicious code in fixregex()
  perf parse-events: Use uintptr_t when casting numbers to pointers

Pull networking fixes from David Miller:

 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
    Kivilinna.

 2) Fix loss of RTT samples in rxrpc, from David Howells.

 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.

 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.

 5) We disable BH for too lokng in sctp_get_port_local(), add a
    cond_resched() here as well, from Xin Long.

 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.

 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
    Yonghong Song.

 8) Missing of_node_put() in mt7530 DSA driver, from Sumera
    Priyadarsini.

 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.

10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.

11) Memory leak in rxkad_verify_response, from Dinghao Liu.

12) In tipc, don't use smp_processor_id() in preemptible context. From
    Tuong Lien.

13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.

14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.

15) Fix ABI mismatch between driver and firmware in nfp, from Louis
    Peens.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
  net/smc: fix sock refcounting in case of termination
  net/smc: reset sndbuf_desc if freed
  net/smc: set rx_off for SMCR explicitly
  net/smc: fix toleration of fake add_link messages
  tg3: Fix soft lockup when tg3_reset_task() fails.
  doc: net: dsa: Fix typo in config code sample
  net: dp83867: Fix WoL SecureOn password
  nfp: flower: fix ABI mismatch between driver and firmware
  tipc: fix shutdown() of connectionless socket
  ipv6: Fix sysctl max for fib_multipath_hash_policy
  drivers/net/wan/hdlc: Change the default of hard_header_len to 0
  net: gemini: Fix another missing clk_disable_unprepare() in probe
  net: bcmgenet: fix mask check in bcmgenet_validate_flow()
  amd-xgbe: Add support for new port mode
  net: usb: dm9601: Add USB ID of Keenetic Plus DSL
  vhost: fix typo in error message
  net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
  pktgen: fix error message with wrong function name
  net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
  cxgb4: fix thermal zone device registration
  ...

Merge gate page refcount fix from Dave Hansen:
 "During the conversion over to pin_user_pages(), gate pages were missed.

  The fix is pretty simple, and is accompanied by a new test from Andy
  which probably would have caught this earlier"

* emailed patches from Dave Hansen <dave.hansen@linux.intel.com>:
  selftests/x86/test_vsyscall: Improve the process_vm_readv() test
  mm: fix pin vs. gup mismatch with gate pages

The existing code accepted process_vm_readv() success or failure as long
as it didn't return garbage.  This is too weak: if the vsyscall page is
readable, then process_vm_readv() should succeed and, if the page is not
readable, then it should fail.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Gate pages were missed when converting from get to pin_user_pages().
This can lead to refcount imbalances.  This is reliably and quickly
reproducible running the x86 selftests when vsyscall=emulate is enabled
(the default).  Fix by using try_grab_page() with appropriate flags
passed.

The long story:

Today, pin_user_pages() and get_user_pages() are similar interfaces for
manipulating page reference counts.  However, "pins" use a "bias" value
and manipulate the actual reference count by 1024 instead of 1 used by
plain "gets".

That means that pin_user_pages() must be matched with unpin_user_pages()
and can't be mixed with a plain put_user_pages() or put_page().

Enter gate pages, like the vsyscall page.  They are pages usually in the
kernel image, but which are mapped to userspace.  Userspace is allowed
access to them, including interfaces using get/pin_user_pages().  The
refcount of these kernel pages is manipulated just like a normal user
page on the get/pin side so that the put/unpin side can work the same
for normal user pages or gate pages.

get_gate_page() uses try_get_page() which only bumps the refcount by
1, not 1024, even if called in the pin_user_pages() path.  If someone
pins a gate page, this happens:

	pin_user_pages()
		get_gate_page()
			try_get_page() // bump refcount +1
	... some time later
	unpin_user_pages()
		page_ref_sub_and_test(page, 1024))

... and boom, we get a refcount off by 1023.  This is reliably and
quickly reproducible running the x86 selftests when booted with
vsyscall=emulate (the default).  The selftests use ptrace(), but I
suspect anything using pin_user_pages() on gate pages could hit this.

To fix it, simply use try_grab_page() instead of try_get_page(), and
pass 'gup_flags' in so that FOLL_PIN can be respected.

This bug traces back to the very beginning of the FOLL_PIN support in
commit 3faa52c0 ("mm/gup: track FOLL_PIN pages"), which showed up in
the 5.7 release.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 3faa52c0 ("mm/gup: track FOLL_PIN pages")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A couple of minor fixes to the display changes that went in for 5.9.
The most important of which is a workaround for a HW bug that was
exposed by better push buffer space management, leading to
random(ish...) display engine hangs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5QDxyMihrxbPk+-sORnaYtjR6_dbM68gEhb2wxht_G1w@mail.gmail.com

Merge tag 'drm-intel-fixes-2020-09-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.9-rc4:
- Clang build warning fix
- HDCP fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgbz2pnx.fsf@intel.com

Merge tag 'amd-drm-fixes-5.9-2020-09-03' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.9-2020-09-03:

amdgpu:
- Fix for 32bit systems
- SW CTF fix
- Update for Sienna Cichlid
- CIK bug fixes

radeon:
- PLL fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903050022.3960-1-alexander.deucher@amd.com

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'smsc9420_probe()', GFP_KERNEL can be used
because it is a probe function and no lock is acquired.

While at it, rewrite the size passed to 'dma_alloc_coherent()' the same way
as the one passed to 'dma_free_coherent()'. This form is less verbose:
   sizeof(struct smsc9420_dma_desc) * RX_RING_SIZE +
   sizeof(struct smsc9420_dma_desc) * TX_RING_SIZE,
vs
   sizeof(struct smsc9420_dma_desc) * (RX_RING_SIZE + TX_RING_SIZE)

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'epic_init_one()', GFP_KERNEL can be used
because it is a probe function and no lock is acquired.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Karsten Graul says:

====================
net/smc: fixes 2020-09-03

Please apply the following patch series for smc to netdev's net tree.

Patch 1 fixes the toleration of older SMC implementations. Patch 2
takes care of a problem that happens when SMCR is used after SMCD
initialization failed. Patch 3 fixes a problem with freed send buffers,
and patch 4 corrects refcounting when SMC terminates due to device
removal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When an ISM device is removed, all its linkgroups are terminated,
i.e. all the corresponding connections are killed.
Connection killing invokes smc_close_active_abort(), which decreases
the sock refcount for certain states to simulate passive closing.
And it cancels the close worker and has to give up the sock lock for
this timeframe. This opens the door for a passive close worker or a
socket close to run in between. In this case smc_close_active_abort() and
passive close worker resp. smc_release() might do a sock_put for passive
closing. This causes:

[ 1323.315943] refcount_t: underflow; use-after-free.
[ 1323.316055] WARNING: CPU: 3 PID: 54469 at lib/refcount.c:28 refcount_warn_saturate+0xe8/0x130
[ 1323.316069] Kernel panic - not syncing: panic_on_warn set ...
[ 1323.316084] CPU: 3 PID: 54469 Comm: uperf Not tainted 5.9.0-20200826.rc2.git0.46328853ed20.300.fc32.s390x+debug #1
[ 1323.316096] Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
[ 1323.316108] Call Trace:
[ 1323.316125]  [<00000000c0d4aae8>] show_stack+0x90/0xf8
[ 1323.316143]  [<00000000c15989b0>] dump_stack+0xa8/0xe8
[ 1323.316158]  [<00000000c0d8344e>] panic+0x11e/0x288
[ 1323.316173]  [<00000000c0d83144>] __warn+0xac/0x158
[ 1323.316187]  [<00000000c1597a7a>] report_bug+0xb2/0x130
[ 1323.316201]  [<00000000c0d36424>] monitor_event_exception+0x44/0xc0
[ 1323.316219]  [<00000000c195c716>] pgm_check_handler+0x1da/0x238
[ 1323.316234]  [<00000000c151844c>] refcount_warn_saturate+0xec/0x130
[ 1323.316280] ([<00000000c1518448>] refcount_warn_saturate+0xe8/0x130)
[ 1323.316310]  [<000003ff801f2e2a>] smc_release+0x192/0x1c8 [smc]
[ 1323.316323]  [<00000000c169f1fa>] __sock_release+0x5a/0xe0
[ 1323.316334]  [<00000000c169f2ac>] sock_close+0x2c/0x40
[ 1323.316350]  [<00000000c1086de0>] __fput+0xb8/0x278
[ 1323.316362]  [<00000000c0db1e0e>] task_work_run+0x76/0xb8
[ 1323.316393]  [<00000000c0d8ab84>] do_exit+0x26c/0x520
[ 1323.316408]  [<00000000c0d8af08>] do_group_exit+0x48/0xc0
[ 1323.316421]  [<00000000c0d8afa8>] __s390x_sys_exit_group+0x28/0x38
[ 1323.316433]  [<00000000c195c32c>] system_call+0xe0/0x2b4
[ 1323.316446] 1 lock held by uperf/54469:
[ 1323.316456]  #0: 0000000044125e60 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x44/0xe0

The patch rechecks sock state in smc_close_active_abort() after
smc_close_cancel_work() to avoid duplicate decrease of sock
refcount for the same purpose.

Fixes: 611b63a1 ("net/smc: cancel tx worker in case of socket aborts")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an SMC connection is created, and there is a problem to
create an RMB or DMB, the previously created send buffer is
thrown away as well including buffer descriptor freeing.
Make sure the connection no longer references the freed
buffer descriptor, otherwise bugs like this are possible:

[71556.835148] =============================================================================
[71556.835168] BUG kmalloc-128 (Tainted: G    B      OE    ): Poison overwritten
[71556.835172] -----------------------------------------------------------------------------

[71556.835179] INFO: 0x00000000d20894be-0x00000000aaef63e9 @offset=2724. First byte 0x0 instead of 0x6b
[71556.835215] INFO: Allocated in __smc_buf_create+0x184/0x578 [smc] age=0 cpu=5 pid=46726
[71556.835234]     ___slab_alloc+0x5a4/0x690
[71556.835239]     __slab_alloc.constprop.0+0x70/0xb0
[71556.835243]     kmem_cache_alloc_trace+0x38e/0x3f8
[71556.835250]     __smc_buf_create+0x184/0x578 [smc]
[71556.835257]     smc_buf_create+0x2e/0xe8 [smc]
[71556.835264]     smc_listen_work+0x516/0x6a0 [smc]
[71556.835275]     process_one_work+0x280/0x478
[71556.835280]     worker_thread+0x66/0x368
[71556.835287]     kthread+0x17a/0x1a0
[71556.835294]     ret_from_fork+0x28/0x2c
[71556.835301] INFO: Freed in smc_buf_create+0xd8/0xe8 [smc] age=0 cpu=5 pid=46726
[71556.835307]     __slab_free+0x246/0x560
[71556.835311]     kfree+0x398/0x3f8
[71556.835318]     smc_buf_create+0xd8/0xe8 [smc]
[71556.835324]     smc_listen_work+0x516/0x6a0 [smc]
[71556.835328]     process_one_work+0x280/0x478
[71556.835332]     worker_thread+0x66/0x368
[71556.835337]     kthread+0x17a/0x1a0
[71556.835344]     ret_from_fork+0x28/0x2c
[71556.835348] INFO: Slab 0x00000000a0744551 objects=51 used=51 fp=0x0000000000000000 flags=0x1ffff00000010200
[71556.835352] INFO: Object 0x00000000563480a1 @offset=2688 fp=0x00000000289567b2

[71556.835359] Redzone 000000006783cde2: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835363] Redzone 00000000e35b876e: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835367] Redzone 0000000023074562: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835372] Redzone 00000000b9564b8c: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835376] Redzone 00000000810c6362: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835380] Redzone 0000000065ef52c3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835384] Redzone 00000000c5dd6984: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835388] Redzone 000000004c480f8f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
[71556.835392] Object 00000000563480a1: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[71556.835397] Object 000000009c479d06: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[71556.835401] Object 000000006e1dce92: 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b  kkkk....kkkkkkkk
[71556.835405] Object 00000000227f7cf8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[71556.835410] Object 000000009a701215: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[71556.835414] Object 000000003731ce76: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[71556.835418] Object 00000000f7085967: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[71556.835422] Object 0000000007f99927: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  kkkkkkkkkkkkkkk.
[71556.835427] Redzone 00000000579c4913: bb bb bb bb bb bb bb bb                          ........
[71556.835431] Padding 00000000305aef82: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
[71556.835435] Padding 00000000b1cdd722: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
[71556.835438] Padding 00000000c7568199: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
[71556.835442] Padding 00000000fad4c4d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
[71556.835451] CPU: 0 PID: 47939 Comm: kworker/0:15 Tainted: G    B      OE     5.9.0-rc1uschi+ #54
[71556.835456] Hardware name: IBM 3906 M03 703 (LPAR)
[71556.835464] Workqueue: events smc_listen_work [smc]
[71556.835470] Call Trace:
[71556.835478]  [<00000000d5eaeb10>] show_stack+0x90/0xf8
[71556.835493]  [<00000000d66fc0f8>] dump_stack+0xa8/0xe8
[71556.835499]  [<00000000d61a511c>] check_bytes_and_report+0x104/0x130
[71556.835504]  [<00000000d61a57b2>] check_object+0x26a/0x2e0
[71556.835509]  [<00000000d61a59bc>] alloc_debug_processing+0x194/0x238
[71556.835514]  [<00000000d61a8c14>] ___slab_alloc+0x5a4/0x690
[71556.835519]  [<00000000d61a9170>] __slab_alloc.constprop.0+0x70/0xb0
[71556.835524]  [<00000000d61aaf66>] kmem_cache_alloc_trace+0x38e/0x3f8
[71556.835530]  [<000003ff80549bbc>] __smc_buf_create+0x184/0x578 [smc]
[71556.835538]  [<000003ff8054a396>] smc_buf_create+0x2e/0xe8 [smc]
[71556.835545]  [<000003ff80540c16>] smc_listen_work+0x516/0x6a0 [smc]
[71556.835549]  [<00000000d5f0f448>] process_one_work+0x280/0x478
[71556.835554]  [<00000000d5f0f6a6>] worker_thread+0x66/0x368
[71556.835559]  [<00000000d5f18692>] kthread+0x17a/0x1a0
[71556.835563]  [<00000000d6abf3b8>] ret_from_fork+0x28/0x2c
[71556.835569] INFO: lockdep is turned off.
[71556.835573] FIX kmalloc-128: Restoring 0x00000000d20894be-0x00000000aaef63e9=0x6b

[71556.835577] FIX kmalloc-128: Marking all objects used

Fixes: fd7f3a74 ("net/smc: remove freed buffer from list")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>