- 31 Aug, 2016 8 commits
-
-
K. Y. Srinivasan authored
The current delay between retries is unnecessarily high and is negatively affecting the time it takes to boot the system. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
K. Y. Srinivasan authored
For synthetic NIC channels, enable explicit signaling policy as netvsc wants to explicitly control when the host is to be signaled. Signed-off-by:
-
Dexuan Cui authored
There is a rare race when we remove an entry from the global list hv_context.percpu_list[cpu] in hv_process_channel_removal() -> percpu_channel_deq() -> list_del(): at this time, if vmbus_on_event() -> process_chn_event() -> pcpu_relid2channel() is trying to query the list, we can get the kernel fault. Similarly, we also have the issue in the code path: vmbus_process_offer() -> percpu_channel_enq(). We can resolve the issue by disabling the tasklet when updating the list. The patch also moves vmbus_release_relid() to a later place where the channel has been removed from the per-cpu and the global lists. Reported-by:
Rolf Neugebauer <rolf.neugebauer@docker.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Background: userspace daemons registration protocol for Hyper-V utilities drivers has two steps: 1) daemon writes its own version to kernel 2) kernel reads it and replies with module version at this point we consider the handshake procedure being completed and we do hv_poll_channel() transitioning the utility device to HVUTIL_READY state. At this point we're ready to handle messages from kernel. When hvutil_transport is in HVUTIL_TRANSPORT_CHARDEV mode we have a single buffer for outgoing message. hvutil_transport_send() puts to this buffer and till the buffer is cleared with hvt_op_read() returns -EFAULT to all consequent calls. Host<->guest protocol guarantees there is no more than one request at a time and we will not get new requests till we reply to the previous one so this single message buffer is enough. Now to the race. When we finish negotiation procedure and send kernel module version to userspace with hvutil_transport_send() it goes into the above mentioned buffer and if the daemon is slow enough to read it from there we can get a collision when a request from the host comes, we won't be able to put anything to the buffer so the request will be lost. To solve the issue we need to know when the negotiation is really done (when the version message is read by the daemon) and transition to HVUTIL_READY state after this happens. Implement a callback on read to support this. Old style netlink communication is not affected by the change, we don't really know when these messages are delivered but we don't have a single message buffer there. Reported-by:
Barry Davis <barry_davis@stormagic.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
vmbus_teardown_gpadl() can result in infinite wait when it is called on 5 second timeout in vmbus_open(). The issue is caused by the fact that gpadl teardown operation won't ever succeed for an opened channel and the timeout isn't always enough. As a guest, we can always trust the host to respond to our request (and there is nothing we can do if it doesn't). Signed-off-by:
-
Vitaly Kuznetsov authored
In some cases create_gpadl_header() allocates submessages but we never free them. Signed-off-by:
-
Vitaly Kuznetsov authored
We use messagecount only once in vmbus_establish_gpadl() to check if it is safe to iterate through the submsglist. We can just initialize the list header in all cases in create_gpadl_header() instead. Signed-off-by:
-
Vitaly Kuznetsov authored
When we crash from NMI context (e.g. after NMI injection from host when 'sysctl -w kernel.unknown_nmi_panic=1' is set) we hit kernel BUG at mm/vmalloc.c:1530! as vfree() is denied. While the issue could be solved with in_nmi() check instead I opted for skipping vfree on all sorts of crashes to reduce the amount of work which can cause consequent crashes. We don't really need to free anything on crash. Signed-off-by:
-
- 30 Aug, 2016 28 commits
-
-
Chris Metcalf authored
Joe Perches points out [1] that this pattern isn't currently safe. This driver doesn't really need the zeroing semantic anyway; by restructuring the code slightly we can initialize all the fields of the structure up front instead. [1] https://lkml.kernel.org/r/1469729491.3998.58.camel@perches.comSigned-off-by:
Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by:
-
Muhammad Falak R Wani authored
Replace explicit computation of vma page count by a call to vma_pages() Signed-off-by:
Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by:
-
Alexandre Belloni authored
v3.20 doesn't exist. heartbeat_enable was actually added in v4.4. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Arnd Bergmann authored
When building with W=1, the __scif_rma_destroy_tcw function causes a harmless warning about an argument variable that is modified but not used: drivers/misc/mic/scif/scif_dma.c: In function ‘__scif_rma_destroy_tcw’: drivers/misc/mic/scif/scif_dma.c:118:27: error: parameter ‘ep’ set but not used [-Werror=unused-but-set-parameter] In this case, we can just remove the argument, since all callers are in the same file. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Alexander Usyskin authored
The device lock was unnecessary obtained in bus rescan work before the amthif client search. That causes incorrect lock ordering and task hang: ... [88004.613213] INFO: task kworker/1:14:21832 blocked for more than 120 seconds. ... [88004.645934] Workqueue: events mei_cl_bus_rescan_work ... The correct lock order is cl_bus_lock device_lock me_clients_rwsem Move device_lock into amthif init function that called after me_clients_rwsem is released. This fixes regression introduced by commit: commit 025fb792 ("mei: split amthif client init from end of clients enumeration") Cc: <stable@vger.kernel.org> # 4.6+ Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Alexander Usyskin authored
Signed-off-by:
-
Alexander Usyskin authored
mei_amthif_read have only one difference from mei_read, it is not calling mei_read_start(). Make mei_read_start return immediately for amthif client and drop the special mei_amthif_read function. Signed-off-by:
-
Alexander Usyskin authored
The FW supports only one pending read per host client, in order to support issuing of consecutive reads the driver queues read requests internally and send them to the firmware after pending one has completed. Signed-off-by:
-
Tomas Winkler authored
Enclose the boiler plate code of allocating a control/hbm command cb and enqueueing it onto ctrl_wr.list in a convenient wrapper mei_cl_enqueue_ctrl_wr_cb(). This is a preparatory patch for enabling consecutive reads. Signed-off-by:
-
Tomas Winkler authored
With the introduction of the receive control flow credits prefixed with rx_ we add tx_ prefix to the variables and function used for tracking the transmit control flow credits. Signed-off-by:
-
Alexander Usyskin authored
Use RX flow control counter in the host client structure to track the number of simultaneous outstanding reads. This eliminates search in queues and makes ground for enabling for parallel read. Signed-off-by:
-
Alexander Usyskin authored
The read callbacks for the fixed address clients, that don't have flow control are built now on the receive path. In order to have a single allocation place we remove the allocation from the read request. Signed-off-by:
-
Alexander Usyskin authored
The read callback is always prepared with MTU-sized buffer and the FW can't send more than the MTU in one message. Checking for buffer existence and krealloc to increase receive buffer size are redundant and may be safely discarded. Signed-off-by:
-
Alexander Usyskin authored
Open code mei_clear_lists into its only caller mei_amthif_releas and drop unused parameter 'dev' form from mei_clear_list function. Signed-off-by:
-
Alexander Usyskin authored
The Fixed address clients do not work with the flow control, and the packet RX callback was allocated upon TX with anticipation of a following RX. This won't work if the clients with unsolicited Rx. Rather than preparing read callback upon a write we allocate one directly on the reciev path if one doesn't exists. Signed-off-by:
-
Alexander Usyskin authored
Store the file associated with a client in the host client structure, this enables dropping the special amthif client file pointer from struct mei_device, and this is also a preparation for changing the way rx packet allocation for fixed_address clients Signed-off-by:
-
Alexander Usyskin authored
Move read cb to the completion queue if a read finds out that client is not connected. This expedite user space reader wake on error condition. Signed-off-by:
-
Tomas Winkler authored
Correct errno on client disconnection is -ENODEV not -EBUSY Cc: <stable@vger.kernel.org> #4.3+ Signed-off-by:
-
Alexander Usyskin authored
In the course of the read flow we want to wait for read completion only if the read queue is empty. However the calling list_empty(&cl->rd_completed) is a duplication as the same check was performed by mei_cl_read_cb() and the waiting is skipped if it returns not NULL. Signed-off-by:
-
Tomas Winkler authored
In mei_hbm_cl_hdr buf argument was not described Signed-off-by:
-
Alexander Usyskin authored
Schedule link reset if failed to perform runtime suspend or resume. Set active runtime pm stte on link reset to clean runtimr pm error, if present. Signed-off-by:
-
Alexander Usyskin authored
mei_io_cb_alloc_buf have a single caller :mei_cl_alloc_cb. After amthif stopped using it, the code can be integrated into the caller and the function can be dropped. Signed-off-by:
-
Alexander Usyskin authored
Use mei_cl_alloc_cb wrapper instead of open code steps Signed-off-by:
-
Alexander Usyskin authored
Incorporate the mei_amthif_send_cmd code into its only caller: mei_amthif_run_next_cmd Signed-off-by:
-
Alexander Usyskin authored
Currently the poll function is bailing early for amthif client and ignores requests for async events notifications. Move async event processing before amthif to enable async events notifications on amthif client. Signed-off-by:
-
Alexander Usyskin authored
iamthif_current_cb was used in request cancel in amthif code. Now a canceled request is discarded only at the end of the processing and the variable lost its purpose and can be safely removed. Signed-off-by:
-
Alexander Usyskin authored
Currently, all requests cancelled by the user are immediately removed from the queues. Such removal can cause unexpected behavior in the case when a request is partially written or a reply is received after the request is cancelled. To resolve this a request is always fully processed and the result is discarded in case the request was canceled. This completes the partial fix in commit: 9d04ee11 ("mei: amthif: discard not read messages") Signed-off-by:
-
Alexander Usyskin authored
AMTHIF code now uses read completed queue to store replies from the FW. It is possible to send the next request as soon as a read from the FW is completed. With these changes we don't need the READ_COMPLETE state. Signed-off-by:
-
- 28 Aug, 2016 4 commits
-
-
Valentin Rothberg authored
Splitting a command string could lead to unintended arguments. Use an argument list in the execute() function instead. Signed-off-by:
Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by:
-
Valentin Rothberg authored
'symbol' and 'feature' are used synonymously to refer to Kconfig symbols (configs, menus, etc.). Use the term 'symbol' to have a consistent terminology and to make the code more comprehensible. Signed-off-by:
-
Valentin Rothberg authored
Fix pylint and pep8 warnings to have a consistent syntax and style. Signed-off-by:
-
Valentin Rothberg authored
Replace the deprecated OptionParser with ArgumentParser, as recommended by pylint. Signed-off-by:
-
