- 12 May, 2007 40 commits
-
-
Heiko Carstens authored
Add missing cond_syscall statements for compat_sys_signalfd and compat_sys_timerfd. Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Christian Krafft authored
When trying to load the ipmi_si module on a powerpc with no BMC (baseboard management controller) the driver failes to load correctly, but doesn't unregister itself from of_platform. So, on a second modprobe the kernel crashes. This patch adds the missing unregister call. Signed-off-by:
Christian Krafft <krafft@de.ibm.com> Signed-off-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
Corey Minyard authored
Fix a rather obvious error that Patrick found in the setup routines. Need to set the proper address space in the ACPI case. Signed-off-by:
-
Stephen Rothwell authored
This address bounces with "550 Unknown user". Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Kylene Hall <kjhall@us.ibm.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by:
-
Stephen Rothwell authored
On PPC64, we need to include asm/prom.h for function definitions. Signed-off-by:
-
Paul Fulghum authored
Flush the tty flip buffer when the line discipline input queue is flushed, including the user call tcflush(TCIFLUSH/TCIOFLUSH). This prevents unexpected stale data after a user application calls tcflush(). Signed-off-by:
Alan Cox <alan@redhat.com> Cc: Antonino Ingargiola <tritemio@gmail.com> Signed-off-by:
Paul Fulghum <paulkf@microgate.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Nate Diller authored
Use zero_user_page() instead of open-coding it. [akpm@linux-foundation.org: kmap-type fixes] Signed-off-by:
Nate Diller <nate.diller@gmail.com> Acked-by:
Anton Altaparmakov <aia21@cantab.net> Signed-off-by:
-
Akinobu Mita authored
Disable stacktrace filter support for x86-64 for now. Will be enable when we can get the dwarf2 unwinder back. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Wire up signalfd/timerfd/eventfd syscalls. [SPARC64]: Add support for bq4802 TOD chip, as found on ultra45. [SPARC64]: Correct FIRE_IOMMU_FLUSHINV register offset. [SPARC64]: envctrl.c needs asm/io.h [SPARC64]: Update defconfig. [TTY]: Export proc_clear_tty() to modulea. [SPARC64]: pci_resource_adjust() cannot be __init. [SPARC64]: Spelling fixes. [SPARC]: Spelling fixes. [SPARC64]: Kill LARGE_ALLOCS and update defconfig.
-
Heiko Carstens authored
Looks like these two are wired up in a wrong way. Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
The earlier change to call the bp mtrr init from bugs.c broke on some configurations due to missing includes. Noticed by "Avuton Olrich" <avuton@gmail.com> Signed-off-by:
-
Antonino A. Daplas authored
pm3fb_setup() should only compiled if pm3fb is built statically in the kernel. Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
David S. Miller authored
Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
A use was added to the solaris syscall module which can be built modular. Signed-off-by: -
David S. Miller authored
Noticed by Meelis Roos. Signed-off-by: -
Simon Arlott authored
Spelling fixes in arch/sparc64/. Signed-off-by:
Simon Arlott <simon@fire.lp0.eu> Signed-off-by:
-
Simon Arlott authored
Spelling fixes in arch/sparc/. Signed-off-by:
-
David S. Miller authored
Let's use SLUB, since it works now, in order to get it tested a bit. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (23 commits) [POWERPC] Add arch/powerpc support for the Motorola PrPMC2800 [POWERPC] Add bootwrapper support for Motorola PrPMC2800 platform [POWERPC] Add DTS file for the Motorola PrPMC2800 platform [POWERPC] Check cache coherency of kernel vs firmware [POWERPC] Add Marvell mv64x60 PCI bridge support [POWERPC] Create Marvell mv64x60 I2C platform_data [POWERPC] Create Marvell mv64x60 ethernet platform_data [POWERPC] Create Marvell mv64x60 MPSC (serial) platform_data [POWERPC] Add interrupt support for Marvell mv64x60 chips [POWERPC] Add bootwrapper support for Marvell/mv64x60 I2C [POWERPC] Add bootwrapper support for Marvell MPSC [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge [POWERPC] Add Makefile rules to wrap dts file in zImage [POWERPC] Spelling fixes: arch/ppc/ [POWERPC] U-boot passes the initrd as start/end, not start/size. [POWERPC] PS3: Update ps3_defconfig [POWERPC] PS3: Fix request_irq warning [POWERPC] Don't complain if size-cells == 0 in prom_parse() [POWERPC] Simplify smp_space_timers [POWERPC] Trivial ps3 warning fixes ...
-
Dale Farnsworth authored
This finally adds the PPC_PRPMC2800 Kconfig option, the board setup code (the setup and reset functions) and the defconfig, to support the Motorola PrPMC2800 platform. Signed-off-by:
Dale Farnsworth <dale@farnsworth.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Mark A. Greer authored
The Motorola PrPMC280 and PrPMC2800 processor modules sit on an F101 or PrPMC2800 baseboard, respectively. There are several variants of each type of processor module which can have different amounts of memory, amounts of FLASH, cpu frequencies, and an mv64360 or an mv64362. The bootwrapper code for that platform reads VPD from an I2C EEPROM to determine the processor module variant. From the variant, the amount of memory, etc. is determined and the device tree is updated accordingly. If the variant cannot be determined (e.g., corrupted VPD or a previously unknown variant), the property values already in the device tree are used. Also, the firmware for those platforms does not completely configure the mv64x60 host bridge so that configuration is done here. Signed-off-by:
Mark A. Greer <mgreer@mvista.com> Signed-off-by:
-
Mark A. Greer authored
Add the device tree source file for the prpmc2800 line of processor PMCs. Several of the property values are updated by the bootwrapper but sane defaults have been chosen in case the bootwrapper can't determine the exact processor board variant. The defaults should allow the kernel to boot despite having non-optimal device tree property values. Signed-off-by:
-
Dale Farnsworth authored
check_cache_coherency() verifies that the cache coherency setting of the kernel (CONFIG_NOT_COHERENT_CACHE) matches that left by the firmware, as indicated by coherency-off device tree property. Signed-off-by:
-
Dale Farnsworth authored
This patch adds PCI bridge support for the Marvell mv64x60 chip. We also provide the ability to read/write the mv64x60 hotswap register via sysfs if the hs_reg_valid property is set in the device tree. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Dale Farnsworth authored
This patch creates platform_device entries for the Marvell mv64x60 I2C ports, based on information contained in device tree. This driver (like the other mv64x60 drivers) are unusual in that it works on both the MIPS and PowerPC architectures. Because of that, the drivers do not support the normal PowerPC of_platform_bus_type. They support platform_bus_type instead. Signed-off-by:
-
Dale Farnsworth authored
This patch creates platform_device entries for the Marvell mv64x60 ethernet controller ports, based on information contained in the device tree. This driver (like the other mv64x60 drivers) are unusual in that it works on both the MIPS and PowerPC architectures. Because of that, the drivers do not support the normal PowerPC of_platform_bus_type. They support platform_bus_type instead. Signed-off-by:
-
Dale Farnsworth authored
This patch creates platform_device entries for the Marvell mv64x60 MPSC (multi-protocol serial controller) ports, based on information contained in the device tree. This driver (like the other mv64x60 drivers) are unusual in that it works on both the MIPS and PowerPC architectures. Because of that, the drivers do not support the normal PowerPC of_platform_bus_type. They support platform_bus_type instead. Signed-off-by:
-
Dale Farnsworth authored
There are 3 interrupt groups each with its own status/mask registers. We use a separate struct irq_chip for each interrupt group and handle interrupts in two stages or levels: level 1 selects the appropriate struct irq_chip, and level 2 selects individual interrupts within that irq_chip. Signed-off-by:
-
Mark A. Greer authored
Some platforms support a variety processor modules with no method of determining which exact processor module is being used except by examining Vital Product Data (VPD). The modules may have different amounts of memory, clock frequencies, etc. so reading the VPD becomes necessary to correctly set properties in the device tree before its passed to the kernel. Often the VPD is stored in I2C EEPROMs so an I2C driver becomes necessary. This I2C driver is for the I2C controller that's embedded on the Marvel mv64x60 line of host bridges. Signed-off-by:
-
Mark A. Greer authored
The bootwrapper requires a serial driver to allow cmdline editing and information reporting on the console. This driver is required by platforms that boot a zImage and use the MPSC for the console. Signed-off-by:
-
Mark A. Greer authored
The mv64x60 host bridge has many windows between its various components (cpu, system memory, ethernet ctlr, MPSC, DMA ctlr, PCI MEM, PCI I/O). Unfortunately, the firmware on some of mv64x60-based platforms do not properly or completely configure those windows (e.g., MPSC->system memory windows not configured or CPU->PCI MEM space not configured). So, the missing configuration needs to be done in either the bootwrapper or in the kernel. To keep the kernel as clean as possible, it is done in the bootwrapper. Note that I/O controller configuration is NOT being done, its only the windows to allow the I/O controllers and other components to access memory, etc. that is being done--drivers assume that their controllers can already access system memory). Table of routines and the windows they configure: mv64x60_config_ctlr_windows() ENET->System Memory MPSC->System Memory IDMA->System Memory mv64x60_config_pci_windows() PCI MEM->System Memory PCI I/O->Bridge's Registers mv64x60_config_cpu2pci_window() CPU->PCI MEM CPU->PCI I/O Signed-off-by:
-
Mark A. Greer authored
Add 'zImage.dts' and 'zImage.dts_initrd' build rules that automatically compile and wrap a dts file from arch/powerpc/boot/dts into the zImage file. The resulting zImage will be arch/powerpc/boot/zImage.dts.<platform> and arch/powerpc/boot/zImage.dts_initrd.<platform>, respectively. Having separate rules allows the user to choose whether to include a device tree--and which device tree--at build time. This is useful when one Makefile target builds a zImage that runs on several platforms except for differing device trees. By just setting CONFIG_DEVICE_TREE and running "make zImage.dts" the exact zImage you want is built without Makefile bloat or manually running the wrapper script. The dts file is expected to be arch/powerpc/boot/dts/$(CONFIG_DEVICE_TREE) Signed-off-by:
-
Simon Arlott authored
Spelling fixes in arch/ppc/. Signed-off-by:
-
Scott Wood authored
The boot wrapper platform init code on 83xx and 85xx using the cuboot platform type was incorrectly assuming that u-boot supplied the size of the initrd, whereas it actually supplies the end address. This fixes it. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Geoff Levand authored
Update ps3_defconfig. Signed-off-by:
Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by:
-
Geoff Levand authored
Fix compiler warning: ps3/smp.c:122: warning: ignoring return value of 'request_irq' Signed-off-by:
-
