- 21 Mar, 2011 40 commits
-
-
Dmitri Belimov authored
Rework registers defines. Add TM6000 specific registers defines. Add marks and comments for TM6010 specific registers. Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Unable to test this due to lack of hardware. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Tested with a Logitech QuickCam Pro 4000. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
drivers/media/video/vivi.c:1059: warning: this decimal constant is unsigned only in ISO C90 Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Also fixed a memory leak in the probe function if an error occurred. The gain control range was also fixed (a proper range from -64 to 64). Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
When a device is not detected, the driver prints a warning message. That's ok, except for the fact that, even on newer devices that have eeprom but aren't yet supported, it prints a message saying that the device doesn't have eeprom. Fix it by having a separate message for devices with eeprom, but not yet known by the driver. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Hans Verkuil authored
Signed-off-by:
-
Pawel Osciak authored
Make vivi use videobuf2 in place of videobuf. Signed-off-by:
Pawel Osciak <p.osciak@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Reviewed-by:
-
Mauro Carvalho Chehab authored
drivers/media/dvb/ngene/ngene-i2c.o: In function `cxd2099_attach': ngene-i2c.c:(.text+0x195): multiple definition of `cxd2099_attach' drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here drivers/media/dvb/ngene/ngene-cards.o: In function `cxd2099_attach': ngene-cards.c:(.text+0x116): multiple definition of `cxd2099_attach' drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here drivers/media/dvb/ngene/ngene-dvb.o: In function `cxd2099_attach': ngene-dvb.c:(.text+0x7ad): multiple definition of `cxd2099_attach' drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here Signed-off-by: -
Mauro Carvalho Chehab authored
This driver is abusing the kernel<=>userspace API, due to the lack of a proper solution for it. A discussion were done at: http://www.mail-archive.com/linux-media@vger.kernel.org/msg22196.html But there's not a solution for it yet. So, move the driver to staging, while we don't have a final solution. Signed-off-by:
-
Oliver Endriss authored
22kHz workaround must also be performed for the 2nd frontend. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Oliver Endriss authored
Refactored code for channel initialisation and release: - Do not create device nodes which are not required. - Better error handling. Signed-off-by:
-
Oliver Endriss authored
Do not clear registers ACLC/BCLC in DVB-S2 mode for Cut <= 20. Otherwise, the demod could lose the lock periodically. Verified with cineS2 and Duoflex. Signed-off-by:
-
Oliver Endriss authored
Fixed typos in register macros. Signed-off-by:
-
Oliver Endriss authored
Signed-off-by:
-
Oliver Endriss authored
Add download link for ngene firmware rev 18. Signed-off-by:
-
Oliver Endriss authored
Enable CI for Mystique SaTiX-S2 Dual (v2). Signed-off-by:
-
Ralph Metzler authored
Add dvb net device. Note that the physical address must be setup manually. Signed-off-by:
Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by:
-
Ralph Metzler authored
Implement shutdown workaround for some chipsets. Signed-off-by:
-
Ralph Metzler authored
Driver for the Common Interface Controller CXD2099AR. Supports the CI of the cineS2 DVB-S2. For now, data is passed through '/dev/dvb/adapterX/sec0': - Encrypted data must be written to 'sec0'. - Decrypted data can be read from 'sec0'. - Setup the CAM using device 'ca0'. Signed-off-by:
-
Oliver Endriss authored
If tuner initialisation failed, the frontend node was not removed. When the frontend was opened, a kernel oops occurred... This is the first step to improve error handling during initialisation. Signed-off-by:
-
Oliver Endriss authored
Support up to 4 tuners for cineS2 v5, duoflex & mystique v2. Signed-off-by:
-
Oliver Endriss authored
Fix TS input over I2S. Signed-off-by:
-
Oliver Endriss authored
Small modifications for firmware 18. Signed-off-by:
-
Oliver Endriss authored
Card driver may supply its own lock routine now. Signed-off-by:
-
Andreas Regel authored
The STV0900 features two demodulator paths in one chip. Thus it is not possible to use the generic power off function of the chip when sending one of them to standby. The other path will stop working in that case. The sleep function now switches off functionality specific to the demod path. The global stuff is only switched off, when both paths are in sleep mode. The wakeup function always turns on the global functionality and then works specific to the path. Signed-off-by:
Andreas Regel <andreas.regel@gmx.de> Signed-off-by:
-
