- 05 Jul, 2018 23 commits
-
-
Colin Ian King authored
Variables consumer, cmd_desc, end_cnt and no_of_desc are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'consumer' set but not used [-Wunused-but-set-variable] warning: variable 'cmd_desc' set but not used [-Wunused-but-set-variable] warning: variable 'end_cnt' set but not used [-Wunused-but-set-variable] warning: variable 'no_of_desc' set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Moshe Shemesh says: ==================== Add configuration parameters support Add configuration parameters setting through devlink. Each device registers supported configuration parameters table. Each parameter can be either generic or driver specific. The user can retrieve data on these parameters by "devlink param show" command and can set new value to a parameter by "devlink param set" command. The parameters can be set in different configuration modes: runtime - set while driver is running, no reset required. driverinit - applied while driver initializes, requires restart driver by devlink reload command. permanent - written to device's non-volatile memory, hard reset required. The patches at the end of the patchset introduce few params that are using the introduced infrastructure on mlx4 and bnxt. Command examples and output: pci/0000:81:00.0: name internal_error_reset type generic values: cmode runtime value true cmode driverinit value true name max_macs type generic values: cmode driverinit value 128 name enable_64b_cqe_eqe type driver-specific values: cmode driverinit value true name enable_4k_uar type driver-specific values: cmode driverinit value false pci/0000:81:00.0: name internal_error_reset type generic values: cmode runtime value false cmode driverinit value true ==================== Signed-off-by: -
Vasundhara Volam authored
Create initial devlink parameters table for bnxt_en. Table consists of a permanent generic parameter. enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by:
-
Moshe Shemesh authored
Add mlx4_devlink_reload() to support devlink reload operation. Add mlx4_devlink_param_load_driverinit_values() to load values which were set using driverinit configuration mode. Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
Create initial parameters table for mlx4. The table consists of two generic parameters and two driver-specific parameters. Generic: internal_err_reset - Enable reset device on internal errors. This parameter can be configured on mlx4 either on runtime or during driver initialization. max_macs - Max number of MACs per ETH port. For mlx4 this parameter value range is between 1 and 128. This parameter can be configured on mlx4 only during driver initialization. Driver specific: enable_64b_cqe_eqe - Enable 64 byte CQEs/EQEs when the FW supports it. This parameter can be configured on mlx4 only during driver initialization. enable_4k_uar - Enable using 4K UAR. This parameter can be configured on mlx4 only during driver initialization. Register the parameters table on mlx4_init_one() and unregister on mlx4_remove_one(). Signed-off-by:
-
Moshe Shemesh authored
Add 2 first generic parameters to devlink configuration parameters set: internal_err_reset - When set enables reset device on internal errors. max_macs - max number of MACs per ETH port. Signed-off-by:
-
Moshe Shemesh authored
Add devlink_param_notify() function to support devlink param notifications. Add notification call to devlink param set, register and unregister functions. Add devlink_param_value_changed() function to enable the driver notify devlink on value change. Driver should use this function after value was changed on any configuration mode part to driverinit. Signed-off-by:
-
Moshe Shemesh authored
"driverinit" configuration mode value is held by devlink to enable the driver query the value after reload. Two additional functions added to help the driver get/set the value from/to devlink: devlink_param_driverinit_value_set() and devlink_param_driverinit_value_get(). Signed-off-by:
-
Moshe Shemesh authored
Add param set command to set value for a parameter. Value can be set to any of the supported configuration modes. Signed-off-by:
-
Moshe Shemesh authored
Add param get command which gets data per parameter. Option to dump the parameters data per device. Signed-off-by:
-
Moshe Shemesh authored
Define configuration parameters data structure. Add functions to register and unregister the driver supported configuration parameters table. For each parameter registered, the driver should fill all the parameter's fields. In case the only supported configuration mode is "driverinit" the parameter's get()/set() functions are not required and should be set to NULL, for any other configuration mode, these functions are required and should be set by the driver. Signed-off-by:
-
Colin Ian King authored
Variable channel is being assigned but is never used hence it is redundant and can be removed. Cleans up two clang warnings: warning: variable 'channel' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Variables my_epid and max_epid are currently assigned and not being used - however, I suspect they were intended to be used in the for-loops to reduce the dereferencing of hw. Replace hw->my_epid and hw->max_epid with these variables. Cleans up clang warnings: warning: variable 'my_epid' set but not used [-Wunused-but-set-variable] variable 'max_epid' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer skb is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'skb' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer ndev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'ndev' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warnings: drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:525:5: warning: symbol 'hw_atl_utils_mpi_set_speed' was not declared. Should it be static? drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:536:5: warning: symbol 'hw_atl_utils_mpi_set_state' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warnings: drivers/net/dsa/vitesse-vsc73xx.c:1054:6: warning: symbol 'vsc73xx_get_strings' was not declared. Should it be static? drivers/net/dsa/vitesse-vsc73xx.c:1113:5: warning: symbol 'vsc73xx_get_sset_count' was not declared. Should it be static? drivers/net/dsa/vitesse-vsc73xx.c:1122:6: warning: symbol 'vsc73xx_get_ethtool_stats' was not declared. Should it be static? Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_err error message. Signed-off-by:
-
Li RongQing authored
After commit 07d78363 ("net: Convert NAPI gro list into a small hash table.")' there is 8 hash buckets, which allows more flows to be held for merging. but MAX_GRO_SKBS, the total held skb for merging, is 8 skb still, limit the hash table performance. keep MAX_GRO_SKBS as 8 skb, but limit each hash list length to 8 skb, not the total 8 skb Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Heiner Kallweit authored
When runtime-suspending we configure WoL w/o touching saved_wolopts. If saved_wolopts == 0 we would power down the PHY in this case what's wrong. Therefore we have to check the actual chip WoL settings here. Fixes: 433f9d0d ("r8169: improve saved_wolopts handling") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Edward Cree authored
Since callees (ip_rcv_core() and ip_rcv_finish_core()) might free or steal the skb, we can't use the list_cut_before() method; we can't even do a list_del(&skb->list) in the drop case, because skb might have already been freed and reused. So instead, take each skb off the source list before processing, and add it to the sublist afterwards if it wasn't freed or stolen. Fixes: 5fa12739 net: ipv4: listify ip_rcv_finish Fixes: 17266ee9 net: ipv4: listified version of ip_rcv Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Casey Leedom authored
In highly constrained resources environments (like the 124VF T5 and 248VF T6 configurations), PF4 may not have very many resources at all and we need to adapt to whatever we've been allocated, this patch adds support to get the provisioned resources. Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
- 04 Jul, 2018 17 commits
-
-
Colin Ian King authored
Variable 'irq' is being assigned but is never used hence it is and can be removed. Cleans up clang warning: warning: variable 'irq' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Variable old_vlan is being assigned but is never used hence it is and can be removed. Cleans up clang warning: warning: variable 'old_vlan' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer 'name' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'name' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer 'info' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'info' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer pfhwdev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'pfhwdev' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Variable 'protocol' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'protocol' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Variable last_rule_idx is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'last_rule_idx' set but not used [-Wunused-but-set-variable] Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
Colin Ian King authored
Variable 'inc' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'inc' set but not used [-Wunused-but-set-variable] Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Colin Ian King authored
Pointer req and variable func are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'req' set but not used [-Wunused-but-set-variable] warning: variable 'func' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Variable 'freed' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'freed' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer rxd is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'rxb' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Variable old_duplex is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'old_duplex' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer rxdesc is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'rxdesc' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Variable 'off' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'off' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
David S. Miller authored
Jesus Sanchez-Palencia says: ==================== Scheduled packet Transmission: ETF Changes since v1: - moved struct sock_txtime from socket.h to uapi net_tstamp.h; - sk_clockid was changed from u16 to u8; - sk_txtime_flags was changed from u16 to a u8 bit field in struct sock; - the socket option flags are now validated in sock_setsockopt(); - added SO_EE_ORIGIN_TXTIME; - sockc.transmit_time is now initialized from all IPv4 Tx paths; - added support for the IPv6 Tx path; Overview ======== This work consists of a set of kernel interfaces that can be used by applications that require (time-based) Scheduled Tx of packets. It is comprised by 3 new components to the kernel: - SO_TXTIME: socket option + cmsg programming interfaces. - etf: the "earliest txtime first" qdisc, that provides per-queue TxTime-based scheduling. This has been renamed from 'tbs' to 'etf' to better describe its functionality. - taprio: the "time-aware priority scheduler" qdisc, that provides per-port Time-Aware scheduling; This patchset is providing the first 2 components, which have been developed for longer. The taprio qdisc will be shared as an RFC separately (shortly). Note that this series is a follow up of the "Time based packet transmission" RFCv3 [1]. etf (formerly known as 'tbs') ============================= For applications/systems that the concept of time slices isn't precise enough, the etf qdisc allows applications to control the instant when a packet should leave the network controller. When used in conjunction with taprio, it can also be used in case the application needs to control with greater guarantee the offset into each time slice a packet will be sent. Another use case of etf, is when only a small number of applications on a system are time sensitive, so it can then be used with a more traditional root qdisc (like mqprio). The etf qdisc is designed so it buffers packets until a configurable time before their deadline (Tx time). The qdisc uses a rbtree internally so the buffered packets are always 'ordered' by their txtime (deadline) and will be dequeued following the earliest txtime first. It relies on the SO_TXTIME API set for receiving the per-packet timestamp (txtime) as well as the config flags for each socket: the clockid to be used as a reference, if the expected mode of txtime for that socket is deadline or strict mode, and if packet drops should be reported on the socket's error queue or not. The qdisc will drop any packets with a Tx time in the past, or if a packet expires while waiting for being dequeued. Drops can be reported as errors back to userspace through the socket's error queue. Example configuration: $ tc qdisc add dev enp2s0 parent 100:1 etf offload delta 200000 \ clockid CLOCK_TAI Here, the Qdisc will use HW offload for the txtime control. Packets will be dequeued by the qdisc "delta" (200000) nanoseconds before their transmission time. Because this will be using HW offload and since dynamic clocks are not supported by hrtimers, the system clock and the PHC clock must be synchronized for this mode to behave as expected. A more complete example can be found here, with instructions of how to test it: https://gist.github.com/jeez/bd3afeff081ba64a695008dd8215866f [2] Note that we haven't modified the qdisc so it uses a timerqueue because the modification needed was increasing the number of cachelines of a sk_buff. This series is also hosted on github and can be found at [3]. The companion iproute2 patches can be found at [4]. [1] https://patchwork.ozlabs.org/cover/882342/ [2] github doesn't make it clear, but the gist can be cloned like this: $ git clone https://gist.github.com/jeez/bd3afeff081ba64a695008dd8215866f scheduled-tx-tests [3] https://github.com/jeez/linux/tree/etf-v2 [4] https://github.com/jeez/iproute2/tree/etf-v2 ==================== Signed-off-by: -
Jesus Sanchez-Palencia authored
Use the socket error queue for reporting dropped packets if the socket has enabled that feature through the SO_TXTIME API. Packets are dropped either on enqueue() if they aren't accepted by the qdisc or on dequeue() if the system misses their deadline. Those are reported as different errors so applications can react accordingly. Userspace can retrieve the errors through the socket error queue and the corresponding cmsg interfaces. A struct sock_extended_err* is used for returning the error data, and the packet's timestamp can be retrieved by adding both ee_data and ee_info fields as e.g.: ((__u64) serr->ee_data << 32) + serr->ee_info This feature is disabled by default and must be explicitly enabled by applications. Enabling it can bring some overhead for the Tx cycles of the application. Signed-off-by:Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com> Signed-off-by:
-
Jesus Sanchez-Palencia authored
Implement HW offload support for SO_TXTIME through igb's Launchtime feature. This is done by extending igb_setup_tc() so it supports TC_SETUP_QDISC_ETF and configuring i210 so time based transmit arbitration is enabled. The FQTSS transmission mode added before is extended so strict priority (SP) queues wait for stream reservation (SR) ones. igb_config_tx_modes() is extended so it can support enabling/disabling Launchtime following the previous approach used for the credit-based shaper (CBS). As the previous flow, FQTSS transmission mode is enabled automatically by the driver once Launchtime (or CBS, as before) is enabled. Similarly, it's automatically disabled when the feature is disabled for the last queue that had it setup on. The driver just consumes the transmit times from the skbuffs directly, so no special handling is done in case an 'invalid' time is provided. We assume this has been handled by the ETF qdisc already. Signed-off-by:
-
