- 21 Dec, 2019 40 commits
-
-
Bart Van Assche authored
[ Upstream commit ac452b8e ] Pass the correct session ID to find_sess_by_s_id() instead of passing an uninitialized variable. Cc: Himanshu Madhani <hmadhani@marvell.com> Fixes: 2d70c103 ("[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series") # v3.5. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
Himanshu Madhani <hmadhani@marvell.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Himanshu Madhani authored
[ Upstream commit 5d328de6 ] With debug kernel we see following wanings indicating memory leak. [28809.523959] WARNING: CPU: 3 PID: 6790 at lib/dma-debug.c:978 dma_debug_device_change+0x166/0x1d0 [28809.523964] pci 0000:0c:00.6: DMA-API: device driver has pending DMA allocations while released from device [count=5] [28809.523964] One of leaked entries details: [device address=0x00000002aefe4000] [size=8208 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] Fix this by unmapping DMA memory. Signed-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 7f028caa ] In s3c64xx_eint_eint0_init() the for_each_child_of_node() loop is used with a break to find a matching child node. Although each iteration of for_each_child_of_node puts the previous node, but early exit from loop misses it. This leads to leak of device node. Cc: <stable@vger.kernel.org> Fixes: 61dd7261 ("pinctrl: Add pinctrl-s3c64xx driver") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Jarkko Nikula authored
[ Upstream commit 287897f9 ] The MMC card detection GPIO polarity is active low on TAO3530, like in many other similar boards. Now the card is not detected and it is unable to mount rootfs from an SD card. Fix this by using the correct polarity. This incorrect polarity was defined already in the commit 30d95c6d ("ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi") in v3.18 kernel and later changed to use defined GPIO constants in v4.4 kernel by the commit 3a637e00 ("ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards"). While the latter commit did not introduce the issue I'm marking it with Fixes tag due the v4.4 kernels still being maintained. Fixes: 3a637e00 ("ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards") Cc: linux-stable <stable@vger.kernel.org> # 4.4+ Signed-off-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Miaoqing Pan authored
[ Upstream commit 08d80e4c ] On SMP platform, when continuously running wifi up/down, the napi poll can be scheduled during chip reset, which will call ath10k_pci_has_fw_crashed() to check the fw status. But in the reset period, the value from FW_INDICATOR_ADDRESS register will return 0xdeadbeef, which also be treated as fw crash. Fix the issue by moving chip reset after napi disabled. ath10k_pci 0000:01:00.0: firmware crashed! (guid 73b30611-5b1e-4bdd-90b4-64c81eb947b6) ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0000:01:00.0: failed to get memcpy hi address for firmware address 4: -16 ath10k_pci 0000:01:00.0: failed to read firmware dump area: -16 ath10k_pci 0000:01:00.0: Copy Engine register dump: ath10k_pci 0000:01:00.0: [00]: 0x0004a000 0 0 0 0 ath10k_pci 0000:01:00.0: [01]: 0x0004a400 0 0 0 0 ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 0 0 ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0 ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0 ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0 ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0 ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 0 1 0 ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 0 0 ath10k_pci 0000:01:00.0: [09]: 0x0004c400 0 0 0 0 ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0 Tested HW: QCA9984,QCA9887,WCN3990 Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Shirish S authored
[ Upstream commit 30aa3d26 ] The MC4_MISC thresholding quirk needs to be applied during S5 -> S0 and S3 -> S0 state transitions, which follow different code paths. Carve it out into a separate function and call it mce_amd_feature_init() where the two code paths of the state transitions converge. [ bp: massage commit message and the carved out function. ] Signed-off-by:
Shirish S <shirish.s@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1547651417-23583-3-git-send-email-shirish.s@amd.comSigned-off-by:
-
Shirish S authored
[ Upstream commit c95b323d ] MC4_MISC thresholding is not supported on all family 0x15 processors, hence skip the x86_model check when applying the quirk. [ bp: massage commit message. ] Signed-off-by:
-
YueHaibing authored
[ Upstream commit cd0d465b ] Fix a static code checker warning: drivers/net/ethernet/intel/e100.c:1349 e100_load_ucode_wait() warn: passing zero to 'PTR_ERR' Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
James Smart authored
[ Upstream commit 8b47ae69 ] Depending on the chipset, the number of NPIV vports may vary and be in excess of what most switches support (256). To avoid confusion with the users, limit the reported NPIV vports to 256. Additionally correct the 16G adapter which is reporting a bogus NPIV vport number if the link is down. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit 2398c41d ] With a wl1251 child node of mmc3 in the device tree decoded in omap_hsmmc.c to handle special wl1251 initialization, we do no longer need to instantiate the mmc3 through pdata quirks. We also can remove the wlan regulator and reset/interrupt definitions and do them through device tree. Fixes: 81eef6ca ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Cc: <stable@vger.kernel.org> # v4.7+ Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Filipe Manana authored
[ Upstream commit a0e248bb ] When doing a buffered write it's possible to leave the subv_writers counter of the root, used for synchronization between buffered nocow writers and snapshotting. This happens in an exceptional case like the following: 1) We fail to allocate data space for the write, since there's not enough available data space nor enough unallocated space for allocating a new data block group; 2) Because of that failure, we try to go to NOCOW mode, which succeeds and therefore we set the local variable 'only_release_metadata' to true and set the root's sub_writers counter to 1 through the call to btrfs_start_write_no_snapshotting() made by check_can_nocow(); 3) The call to btrfs_copy_from_user() returns zero, which is very unlikely to happen but not impossible; 4) No pages are copied because btrfs_copy_from_user() returned zero; 5) We call btrfs_end_write_no_snapshotting() which decrements the root's subv_writers counter to 0; 6) We don't set 'only_release_metadata' back to 'false' because we do it only if 'copied', the value returned by btrfs_copy_from_user(), is greater than zero; 7) On the next iteration of the while loop, which processes the same page range, we are now able to allocate data space for the write (we got enough data space released in the meanwhile); 8) After this if we fail at btrfs_delalloc_reserve_metadata(), because now there isn't enough free metadata space, or in some other place further below (prepare_pages(), lock_and_cleanup_extent_if_need(), btrfs_dirty_pages()), we break out of the while loop with 'only_release_metadata' having a value of 'true'; 9) Because 'only_release_metadata' is 'true' we end up decrementing the root's subv_writers counter to -1 (through a call to btrfs_end_write_no_snapshotting()), and we also end up not releasing the data space previously reserved through btrfs_check_data_free_space(). As a consequence the mechanism for synchronizing NOCOW buffered writes with snapshotting gets broken. Fix this by always setting 'only_release_metadata' to false at the start of each iteration. Fixes: 8257b2dc ("Btrfs: introduce btrfs_{start, end}_nocow_write() for each subvolume") Fixes: 7ee9e440 ("Btrfs: check if we can nocow if we don't have data space") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Nuno Sá authored
[ Upstream commit 4c35b7a5 ] The driver is defining debugfs entries by calling `adis16480_debugfs_init()`. However, those entries are attached to the iio_dev debugfs entry which won't exist if no debugfs_reg_access callback is provided. Fixes: 2f3abe6c ("iio:imu: Add support for the ADIS16480 and similar IMUs") Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit bd82873f ] spin_unlock_irqrestore() might be called with stale flags after reading port status, possibly restoring interrupts to a incorrect state. If a usb2 port just finished resuming while the port status is read the spin lock will be temporary released and re-acquired in a separate function. The flags parameter is passed as value instead of a pointer, not updating flags properly before the final spin_unlock_irqrestore() is called. Cc: <stable@vger.kernel.org> # v3.12+ Fixes: 8b3d4570 ("usb: Fix xHCI host issues on remote wakeup.") Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mika Westerberg authored
[ Upstream commit ce91f1a4 ] When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and the xHCI device is hot-removed as a result of unplugging a dock for example, the driver leaks memory it allocates for xhci->usb3_rhub.psi and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak: unreferenced object 0xffff922c24ef42f0 (size 16): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 16 bytes): 21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00 !.......#....... backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 unreferenced object 0xffff922c24ef3318 (size 8): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 8 bytes): 34 01 05 00 35 41 0a 00 4...5A.. backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 Fix this by calling kfree() for the both psi objects in xhci_mem_cleanup(). Cc: <stable@vger.kernel.org> # 4.4+ Fixes: 47189098 ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Henry Lin authored
[ Upstream commit f2c710f7 ] Xhci driver cannot call pci_set_power_state() on non-pci xhci host controllers. For example, NVIDIA Tegra XHCI host controller which acts as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform hits this issue during shutdown. Cc: <stable@vger.kernel.org> Fixes: 638298dc ("xhci: Fix spurious wakeups after S5 on Haswell") Signed-off-by:
Henry Lin <henryl@nvidia.com> Signed-off-by:
-
Steffen Maier authored
[ Upstream commit 100843f1 ] While v2.6.26 commit b75db731 ("[SCSI] zfcp: Add qtcb dump to hba debug trace") is right that we don't want to flood the (payload) trace ring buffer, we don't trace successful FCP command responses by default. So we can include the channel log for problem determination with failed responses of any FSF request type. Fixes: b75db731 ("[SCSI] zfcp: Add qtcb dump to hba debug trace") Fixes: a54ca0f6 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Cc: <stable@vger.kernel.org> #2.6.38+ Link: https://lore.kernel.org/r/e37597b5c4ae123aaa85fd86c23a9f71e994e4a9.1572018132.git.bblock@linux.ibm.comReviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
-
Dmitry Monakhov authored
commit 6ff33d99 upstream. Write only quotas which are dirty at entry. XFSTEST: https://github.com/dmonakhov/xfstests/commit/b10ad23566a5bf75832a6f500e1236084083cddc Link: https://lore.kernel.org/r/20191031103920.3919-1-dmonakhov@openvz.org CC: stable@vger.kernel.org Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Chengguang Xu authored
commit e705f4b8 upstream. Check err when partial == NULL is meaningless because partial == NULL means getting branch successfully without error. CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191105045100.7104-1-cgxu519@mykernel.netSigned-off-by:
Chengguang Xu <cgxu519@mykernel.net> Signed-off-by:
-
Dmitry Monakhov authored
commit df4bb5d1 upstream. There is a race window where quota was redirted once we drop dq_list_lock inside dqput(), but before we grab dquot->dq_lock inside dquot_release() TASK1 TASK2 (chowner) ->dqput() we_slept: spin_lock(&dq_list_lock) if (dquot_dirty(dquot)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->write_dquot(dquot); goto we_slept if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->release_dquot(dquot); dqget() mark_dquot_dirty() dqput() goto we_slept; } So dquot dirty quota will be released by TASK1, but on next we_sleept loop we detect this and call ->write_dquot() for it. XFSTEST: https://github.com/dmonakhov/xfstests/commit/440a80d4cbb39e9234df4d7240aee1d551c36107 Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org CC: stable@vger.kernel.org Signed-off-by:
-
Ville Syrjälä authored
commit 6039f37d upstream. The bar values are little endian, not big endian. The pack function did it right but the unpack got it wrong. Fix it. Cc: stable@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Martin Bugge <marbugge@cisco.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Fixes: 2c676f37 ("[media] hdmi: added unpack and logging functions for InfoFrames") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919132853.30954-1-ville.syrjala@linux.intel.comReviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Alastair D'Silva authored
commit f9ec1116 upstream. When calling __kernel_sync_dicache with a size >4GB, we were masking off the upper 32 bits, so we would incorrectly flush a range smaller than intended. This patch replaces the 32 bit shifts with 64 bit ones, so that the full size is accounted for. Signed-off-by:
Alastair D'Silva <alastair@d-silva.org> Cc: stable@vger.kernel.org Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191104023305.9581-3-alastair@au1.ibm.comSigned-off-by:
-
Arnd Bergmann authored
commit 99817404 upstream. Going through the uses of timeval in the user space API, I noticed two bugs in ppdev that were introduced in the y2038 conversion: * The range check was accidentally moved from ppsettime to ppgettime * On sparc64, the microseconds are in the other half of the 64-bit word. Fix both, and mark the fix for stable backports. Cc: stable@vger.kernel.org Fixes: 3b9ab374 ("ppdev: convert to y2038 safe") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191108203435.112759-8-arnd@arndb.deSigned-off-by:
-
H. Nikolaus Schaller authored
commit f6498b92 upstream. Pandora_wl1251_init_card was used to do special pdata based setup of the sdio mmc interface. This does no longer work with v4.7 and later. A fix requires a device tree based mmc3 setup. Therefore we move the special setup to omap_hsmmc.c instead of calling some pdata supplied init_card function. The new code checks for a DT child node compatible to wl1251 so it will not affect other MMC3 use cases. Generally, this code was and still is a hack and should be moved to mmc core to e.g. read such properties from optional DT child nodes. Fixes: 81eef6ca ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by:
-
Krzysztof Kozlowski authored
commit a322b337 upstream. Several functions use for_each_child_of_node() loop with a break to find a matching child node. Although each iteration of for_each_child_of_node puts the previous node, but early exit from loop misses it. This leads to leak of device node. Cc: <stable@vger.kernel.org> Fixes: 9a2c1c3b ("pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes") Signed-off-by:
-
Krzysztof Kozlowski authored
commit 6fbbcb05 upstream. In s3c24xx_eint_init() the for_each_child_of_node() loop is used with a break to find a matching child node. Although each iteration of for_each_child_of_node puts the previous node, but early exit from loop misses it. This leads to leak of device node. Cc: <stable@vger.kernel.org> Fixes: af99a750 ("pinctrl: Add pinctrl-s3c24xx driver") Signed-off-by:
-
Rafael J. Wysocki authored
commit b9ea0bae upstream. Certain ACPI-enumerated devices represented as platform devices in Linux, like fans, require special low-level power management handling implemented by their drivers that is not in agreement with the ACPI PM domain behavior. That leads to problems with managing ACPI fans during system-wide suspend and resume. For this reason, make acpi_dev_pm_attach() skip the affected devices by adding a list of device IDs to avoid to it and putting the IDs of the affected devices into that list. Fixes: e5cc8ef3 (ACPI / PM: Provide ACPI PM callback routines for subsystems) Reported-by:
Zhang Rui <rui.zhang@intel.com> Tested-by:
Todd Brandt <todd.e.brandt@linux.intel.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Vamshi K Sthambamkadi authored
commit 627ead72 upstream. kmemleak reported backtrace: [<bbee0454>] kmem_cache_alloc_trace+0x128/0x260 [<6677f215>] i2c_acpi_install_space_handler+0x4b/0xe0 [<1180f4fc>] i2c_register_adapter+0x186/0x400 [<6083baf7>] i2c_add_adapter+0x4e/0x70 [<a3ddf966>] intel_gmbus_setup+0x1a2/0x2c0 [i915] [<84cb69ae>] i915_driver_probe+0x8d8/0x13a0 [i915] [<81911d4b>] i915_pci_probe+0x48/0x160 [i915] [<4b159af1>] pci_device_probe+0xdc/0x160 [<b3c64704>] really_probe+0x1ee/0x450 [<bc029f5a>] driver_probe_device+0x142/0x1b0 [<d8829d20>] device_driver_attach+0x49/0x50 [<de71f045>] __driver_attach+0xc9/0x150 [<df33ac83>] bus_for_each_dev+0x56/0xa0 [<80089bba>] driver_attach+0x19/0x20 [<cc73f583>] bus_add_driver+0x177/0x220 [<7b29d8c7>] driver_register+0x56/0xf0 In i2c_acpi_remove_space_handler(), a leak occurs whenever the "data" parameter is initialized to 0 before being passed to acpi_bus_get_private_data(). This is because the NULL pointer check in acpi_bus_get_private_data() (condition->if(!*data)) returns EINVAL and, in consequence, memory is never freed in i2c_acpi_remove_space_handler(). Fix the NULL pointer check in acpi_bus_get_private_data() to follow the analogous check in acpi_get_data_full(). Signed-off-by:
Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Francesco Ruggeri authored
commit 833a426c upstream. acpi_os_map_cleanup checks map->refcount outside of acpi_ioremap_lock before freeing the map. This creates a race condition the can result in the map being freed more than once. A panic can be caused by running for ((i=0; i<10; i++)) do for ((j=0; j<100000; j++)) do cat /sys/firmware/acpi/tables/data/BERT >/dev/null done & done This patch makes sure that only the process that drops the reference to 0 does the freeing. Fixes: b7c1fadd ("ACPI: Do not use krefs under a mutex in osl.c") Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Reviewed-by:
Dmitry Safonov <0x7f454c46@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Leonard Crestez authored
commit 2abb0d52 upstream. There is no locking in this sysfs show function so stats printing can race with a devfreq_update_status called as part of freq switching or with initialization. Also add an assert in devfreq_update_status to make it clear that lock must be held by caller. Fixes: 39688ce6 ("PM / devfreq: account suspend/resume for stats") Cc: stable@vger.kernel.org Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Zhenzhong Duan authored
commit 918c1fe9 upstream. Fix __cpuidle_set_driver() to check if any of the CPUs in the mask has a driver different from drv already and, if so, return -EBUSY before updating any cpuidle_drivers per-CPU pointers. Fixes: 82467a5a ("cpuidle: simplify multiple driver support") Cc: 3.11+ <stable@vger.kernel.org> # 3.11+ Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> [ rjw: Subject & changelog ] Signed-off-by:
-
Johan Hovold authored
commit 1091eb83 upstream. If a process is interrupted while accessing the radio device and the core lock is contended, release() could return early and fail to update the interrupt mask. Note that the return value of the v4l2 release file operation is ignored. Fixes: 87d1a50c ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver") Cc: stable <stable@vger.kernel.org> # 2.6.38 Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 11609a7e upstream. If a process is interrupted while accessing the video device and the device lock is contended, release() could return early and fail to free related resources. Note that the return value of the v4l2 release file operation is ignored. Fixes: 28ffeebb ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework") Cc: stable <stable@vger.kernel.org> # 4.2 Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
Denis Efremov authored
commit 315cee42 upstream. memcpy() call with "idata == NULL && ilen == 0" results in undefined behavior in ar5523_cmd(). For example, NULL is passed in callchain "ar5523_stat_work() -> ar5523_cmd_write() -> ar5523_cmd()". This patch adds ilen check before memcpy() call in ar5523_cmd() to prevent an undefined behavior. Cc: Pontus Fuchs <pontus.fuchs@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Laight <David.Laight@ACULAB.COM> Cc: stable@vger.kernel.org Signed-off-by:
Denis Efremov <efremov@linux.com> Signed-off-by:
-
Aleksa Sarai authored
commit a713af39 upstream. Because pids->limit can be changed concurrently (but we don't want to take a lock because it would be needlessly expensive), use atomic64_ts instead. Fixes: commit 49b786ea ("cgroup: implement the PIDs subsystem") Cc: stable@vger.kernel.org # v4.3+ Signed-off-by:
Aleksa Sarai <cyphar@cyphar.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Ming Lei authored
commit 8962842c upstream. It is reported that sysfs buffer overflow can be triggered if the system has too many CPU cores(>841 on 4K PAGE_SIZE) when showing CPUs of hctx via /sys/block/$DEV/mq/$N/cpu_list. Use snprintf to avoid the potential buffer overflow. This version doesn't change the attribute format, and simply stops showing CPU numbers if the buffer is going to overflow. Cc: stable@vger.kernel.org Fixes: 676141e4("blk-mq: don't dump CPU -> hw queue map on driver load") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Pawel Harlozinski authored
commit 8f157d4f upstream. Check for existance of jack before tracing. NULL pointer dereference has been reported by KASAN while unloading machine driver (snd_soc_cnl_rt274). Signed-off-by:
Pawel Harlozinski <pawel.harlozinski@linux.intel.com> Link: https://lore.kernel.org/r/20191112130237.10141-1-pawel.harlozinski@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Tejun Heo authored
commit e66b39af upstream. 008847f6 ("workqueue: allow rescuer thread to do more work.") made the rescuer worker requeue the pwq immediately if there may be more work items which need rescuing instead of waiting for the next mayday timer expiration. Unfortunately, it doesn't check whether the pwq is already on the mayday list and unconditionally gets the ref and moves it onto the list. This doesn't corrupt the list but creates an additional reference to the pwq. It got queued twice but will only be removed once. This leak later can trigger pwq refcnt warning on workqueue destruction and prevent freeing of the workqueue. Signed-off-by:
-
Tejun Heo authored
commit def98c84 upstream. Before actually destrying a workqueue, destroy_workqueue() checks whether it's actually idle. If it isn't, it prints out a bunch of warning messages and leaves the workqueue dangling. It unfortunately has a couple issues. * Mayday list queueing increments pwq's refcnts which gets detected as busy and fails the sanity checks. However, because mayday list queueing is asynchronous, this condition can happen without any actual work items left in the workqueue. * Sanity check failure leaves the sysfs interface behind too which can lead to init failure of newer instances of the workqueue. This patch fixes the above two by * If a workqueue has a rescuer, disable and kill the rescuer before sanity checks. Disabling and killing is guaranteed to flush the existing mayday list. * Remove sysfs interface before sanity checks. Signed-off-by:
Marcin Pawlowski <mpawlowski@fb.com> Reported-by:
"Williams, Gerald S" <gerald.s.williams@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit ca58f551 ] This is an alternative fix attemp for the issue reported in the commit caa8422d ("ALSA: hda: Flush interrupts on disabling") that was reverted later due to regressions. Instead of tweaking the hardware disablement order and the enforced irq flushing, do calling cancel_work_sync() of the unsol work early enough, and explicitly ignore the unsol events during the shutdown by checking the bus->shutdown flag. Fixes: caa8422d ("ALSA: hda: Flush interrupts on disabling") Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://lore.kernel.org/r/s5h1ruxt9cz.wl-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 702600ee upstream. Newer versions of awk spit out these fun warnings: awk: ../lib/raid6/unroll.awk:16: warning: regexp escape sequence `\#' is not a known regexp operator As commit 700c1018 ("x86/insn: Fix awk regexp warnings") showed, it turns out that there are a number of awk strings that do not need to be escaped and newer versions of awk now warn about this. Fix the string up so that no warning is produced. The exact same kernel module gets created before and after this patch, showing that it wasn't needed. Link: https://lore.kernel.org/r/20191206152600.GA75093@kroah.comSigned-off-by:
-
