Skip to content

L
linux
Switch branch/tag
  1. 08 Aug, 2005 4 commits
    • Mark Haverkamp's avatar
      [SCSI] aacraid: adapter support update · 8e87c2f1
      Mark Haverkamp authored 
      Received from Mark Salyzyn

This patch adds the product ID for the ICP9067MA adapter.

The entries for the ICP9085LI, ICP5085BR, IBM8k & ASR4810SAS were
incorrect and would not initialize the adapters correctly.
Signed-off-by: default avatarMark Haverkamp <markh@osdl.org>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
      8e87c2f1
    • James Bottomley's avatar
      [SCSI] add global timeout to the scsi mid-layer · b21a4138
      James Bottomley authored 
      There are certain rogue devices (and the aic7xxx driver) that return
BUSY or QUEUE_FULL forever.  This code will apply a global timeout (of
the total number of retries times the per command timer) to a given
command.  If it is exceeded, the command is completed regardless of its
state.

The patch also removes the unused field in the command: timeout and
timeout_total.

This solves the problem of detecting an endless loop in the mid-layer
because of BUSY/QUEUE_FULL bouncing, but will not recover the device.
In the aic7xxx case, the driver can be recovered by sending a bus reset,
so possibly this should be tied into the error handler?
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
      b21a4138
    • Kai Makisara's avatar
      [SCSI] drivers/scsi/st.c: add reference count and related fixes · f03a5670
      Kai Makisara authored 
      I have rediffed the patch against 2.6.13-rc5, done a couple of cosmetic
cleanups, and run some tests.  Brian King has acknowledged that it fixes the
problems he has seen. Seems mature enough for inclusion into 2.6.14 (or
later)?

Nate's explanation of the changes:

I've attached patches against 2.6.13rc2. These are basically identical
to my earlier patches, as I found that all issues I'd seen in earlier
kernels still existed in this kernel.

To summarize, the changes are: (more details in my original email)

- add a kref to the scsi_tape structure, and associate reference
counting stuff

- set sr_request->end_io = blk_end_sync_rq so we get notified when an IO
is rejected when the device goes away

- check rq_status when IOs complete, else we don't know that IOs
rejected for a dead device in fact did not complete

- change last_SRpnt so it's set before an async IO is issued (in case
st_sleep_done is bypassed)

- fix a bogus use of last_SRpnt in st_chk_result
Signed-off-by: default avatarNate Dailey <nate.dailey@stratus.com>
Signed-off-by: default avatarKai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
      f03a5670
    • James Bottomley's avatar
      [SCSI] aacraid: correct use of cmd->timeout field · 5262d085
      James Bottomley authored 
      The cmd->timeout field has been obsolete for a while now.  While looking
to remove it, I came across this use in the aacraid driver.  It looks
like you want to initialise the firmware with the current timeout of the
command (in seconds), so the value I think you should be using is
cmd->timeout_per_command.

Acked by: Mark Haverkamp <markh@osdl.org>
Acked by: Mark Salyzyn <mark_salyzyn@adaptec.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
      5262d085
  3. 07 Aug, 2005 1 commit
    • akpm@osdl.org's avatar
      [SCSI] aic79xx: needs to select SPI_TRANSPORT_ATTRS · a2ae85df
      akpm@osdl.org authored 
      without it you get this failure:

drivers/built-in.o(.text+0xdcccd): In function `ahd_linux_slave_configure':
drivers/scsi/aic7xxx/aic79xx_osm.c:636: undefined reference to `spi_dv_device'
drivers/built-in.o(.text+0xdd7b1): In function `ahd_send_async':
drivers/scsi/aic7xxx/aic79xx_osm.c:1652: undefined reference to `spi_display_xfer_agreement'
drivers/built-in.o(.init.text+0x7b4d): In function `ahd_linux_init':
drivers/scsi/aic7xxx/aic79xx_osm.c:2765: undefined reference to `spi_attach_transport'
drivers/built-in.o(.init.text+0x7c94):drivers/scsi/aic7xxx/aic79xx_osm.c:2774: undefined reference to `spi_release_transport'
drivers/built-in.o(.exit.text+0x72c): In function `ahd_linux_exit':
drivers/scsi/aic7xxx/aic79xx_osm.c:2783: undefined reference to `spi_release_transport'
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
      a2ae85df
  5. 05 Aug, 2005 7 commits
  7. 04 Aug, 2005 2 commits
  9. 03 Aug, 2005 6 commits
  11. 02 Aug, 2005 9 commits
  13. 30 Jul, 2005 6 commits
  15. 29 Jul, 2005 5 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7