- 12 Aug, 2015 26 commits
-
-
Stefan Wahren authored
commit a7068e39 upstream. The buffer for condtraints debug isn't big enough to hold the output in all cases. So fix this issue by increasing the buffer. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Alexey Sokolov authored
commit 15bf722e upstream. ATOL FPrint fiscal printers require usb_clear_halt to be executed to work properly. Add quirk to fix the issue. Signed-off-by:
Alexey Sokolov <sokolov@7pikes.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Felix Fietkau authored
commit 300f77c0 upstream. AR93xx and newer needs to stop rx before tx to avoid getting the DMA engine or MAC into a stuck state. This should reduce/fix the occurence of "Failed to stop Tx DMA" logspam. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.2: - Also move initialisation of ret to match upstream - ath_drain_all_txq() takes a second parameter] Signed-off-by:
-
Dmitry Tunin authored
commit 0d0cef61 upstream. BugLink: https://bugs.launchpad.net/bugs/1427680 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3474 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Dmitry Tunin authored
commit 692c062e upstream. BugLink: https://bugs.launchpad.net/bugs/1462614 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=06 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e076 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
-
Brian King authored
commit 45c44b5f upstream. Increase the default init stage change timeout from 15 seconds to 30 seconds. This resolves issues we have seen with some adapters not transitioning to the first init stage within 15 seconds, which results in adapter initialization failures. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Trond Myklebust authored
commit 88de6af2 upstream. req->rq_private_buf isn't initialised when xprt_setup_backchannel calls xprt_free_allocation. Fixes: fb7a0b9a ("nfs41: New backchannel helper routines") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Chuck Lever authored
commit d683cc49 upstream. When encoding the NFSACL SETACL operation, reserve just the estimated size of the ACL rather than a fixed maximum. This eliminates needless zero padding on the wire that the server ignores. Fixes: ee5dc773 ('NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"') Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Olga Kornievskaia authored
commit e8d975e7 upstream. Problem: When an operation like WRITE receives a BAD_STATEID, even though recovery code clears the RECLAIM_NOGRACE recovery flag before recovering the open state, because of clearing delegation state for the associated inode, nfs_inode_find_state_and_recover() gets called and it makes the same state with RECLAIM_NOGRACE flag again. As a results, when we restart looking over the open states, we end up in the infinite loop instead of breaking out in the next test of state flags. Solution: unset the RECLAIM_NOGRACE set because of calling of nfs_inode_find_state_and_recover() after returning from calling recover_open() function. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
-
Malcolm Priestley authored
commit b5eeed8c upstream. There is a small chance that pRD->pRDInfo->skb could go NULL while the interrupt is processing. Put NULL check on loop to break out. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Robert Schlabbach authored
commit fb6d1f7d upstream. Fix USB 3.0 devices lost in NOTATTACHED state after a hub port reset. Dissolve the function hub_port_finish_reset() completely and divide the actions to be taken into those which need to be done after each reset attempt and those which need to be done after the full procedure is complete, and place them in the appropriate places in hub_port_reset(). Also, remove an unneeded forward declaration of hub_port_reset(). Verbose Problem Description: USB 3.0 devices may be "lost for good" during a hub port reset. This makes Linux unable to boot from USB 3.0 devices in certain constellations of host controllers and devices, because the USB device is lost during initialization, preventing the rootfs from being mounted. The underlying problem is that in the affected constellations, during the processing inside hub_port_reset(), the hub link state goes from 0 to SS.inactive after the initial reset, and back to 0 again only after the following "warm" reset. However, hub_port_finish_reset() is called after each reset attempt and sets the state the connected USB device based on the "preliminary" status of the hot reset to USB_STATE_NOTATTACHED due to SS.inactive, yet when the following warm reset is complete and hub_port_finish_reset() is called again, its call to set the device to USB_STATE_DEFAULT is blocked by usb_set_device_state() which does not allow taking USB devices out of USB_STATE_NOTATTACHED state. Thanks to Alan Stern for guiding me to the proper solution and how to submit it. Link: http://lkml.kernel.org/r/trinity-25981484-72a9-4d46-bf17-9c1cf9301a31-1432073240136%20()%203capp-gmx-bs27Signed-off-by:
Robert Schlabbach <robert_s@gmx.net> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Haggai Eran authored
commit cab46214 upstream. With an RTL8191SU USB adaptor, sometimes the hints for a fragmented packet are set, but the packet length is too large. Allocate enough space to prevent memory corruption and a resulting kernel panic [1]. [1] http://www.spinics.net/lists/linux-wireless/msg136546.htmlSigned-off-by:
Haggai Eran <haggai.eran@gmail.com> ACKed-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Uwe Kleine-König authored
commit e5babdf9 upstream. Since commit bd31b859 (which is in 3.2-rc1) nw_gpio_lock is a raw spinlock that needs usage of the corresponding raw functions. This fixes: drivers/mtd/maps/dc21285.c: In function 'nw_en_write': drivers/mtd/maps/dc21285.c:41:340: warning: passing argument 1 of 'spinlock_check' from incompatible pointer type spin_lock_irqsave(&nw_gpio_lock, flags); In file included from include/linux/seqlock.h:35:0, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/mtd/maps/dc21285.c:8: include/linux/spinlock.h:299:102: note: expected 'struct spinlock_t *' but argument is of type 'struct raw_spinlock_t *' static inline raw_spinlock_t *spinlock_check(spinlock_t *lock) ^ drivers/mtd/maps/dc21285.c:43:25: warning: passing argument 1 of 'spin_unlock_irqrestore' from incompatible pointer type spin_unlock_irqrestore(&nw_gpio_lock, flags); ^ In file included from include/linux/seqlock.h:35:0, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/mtd/maps/dc21285.c:8: include/linux/spinlock.h:370:91: note: expected 'struct spinlock_t *' but argument is of type 'struct raw_spinlock_t *' static inline void spin_unlock_irqrestore(spinlock_t *lock, unsigned long flags) Fixes: bd31b859 ("locking, ARM: Annotate low level hw locks as raw") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Paul E. McKenney authored
commit 6e91f8cb upstream. If, at the time __rcu_process_callbacks() is invoked, there are callbacks in Tiny RCU's callback list, but none of them are ready to be invoked, the current list-management code will knit the non-ready callbacks out of the list. This can result in hangs and possibly worse. This commit therefore inserts a check for there being no callbacks that can be invoked immediately. This bug is unlikely to occur -- you have to get a new callback between the time rcu_sched_qs() or rcu_bh_qs() was called, but before we get to __rcu_process_callbacks(). It was detected by the addition of RCU-bh testing to rcutorture, which in turn was instigated by Iftekhar Ahmed's mutation testing. Although this bug was made much more likely by 915e8a4f (rcu: Remove fastpath from __rcu_process_callbacks()), this did not cause the bug, but rather made it much more probable. That said, it takes more than 40 hours of rcutorture testing, on average, for this bug to appear, so this fix cannot be considered an emergency. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by:
-
Subbaraya Sundeep Bhatta authored
commit 76e838c9 upstream. We need to return error to caller if command is not sent to controller succesfully. Signed-off-by:
Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> Fixes: 72246da4 (usb: Introduce DesignWare USB3 DRD Driver) Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Alex Deucher authored
commit 39fa10f7 upstream. Since we are messing with state in the worker. v2: drop the changes in the mst worker Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Nicolas Ferre authored
commit 8687634b upstream. In RS485 mode, we may want to set the delay_rts_after_send value to 0. In the datasheet, the 0 value is said to "disable" the Transmitter Timeguard but this is exactly the expected behavior if we want no delay... Moreover, if the value was set to non-zero value by device-tree or earlier ioctl command, it was impossible to change it back to zero. Reported-by:
Sami Pietikäinen <Sami.Pietikainen@wapice.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
commit d079abd1 upstream. Too many spaces were introduced in commit 63adc6fb ("pktgen: cleanup checkpatch warnings"), thus misaligning "src_min:" to other columns. Fixes: 63adc6fb ("pktgen: cleanup checkpatch warnings") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Axel Lin authored
commit 12c35005 upstream. WM8955_K_8_0_MASK bits is controlled by WM8955_PLL_CONTROL_3 rather than WM8955_PLL_CONTROL_2. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Axel Lin authored
commit ebb6ad73 upstream. VMID Control 0 BIT[2:1] is VMID Divider Enable and Select 00 = VMID disabled (for OFF mode) 01 = 2 x 50kΩ divider (for normal operation) 10 = 2 x 250kΩ divider (for low power standby) 11 = 2 x 5kΩ divider (for fast start-up) So WM8903_VMID_RES_250K should be 2 << 1, which is 4. Signed-off-by:
-
Axel Lin authored
commit 14ba3ec1 upstream. According to the datasheet: R10 (0Ah) VMID Impedance Control BIT 3:2 VMIDSEL DEFAULT 00 DESCRIPTION: VMID impedance selection control 00: 75kΩ output 01: 300kΩ output 10: 2.5kΩ output WM8737_VMIDSEL_MASK is 0xC (VMIDSEL - [3:2]), so it needs to left shift WM8737_VMIDSEL_SHIFT bits for setting these bits. Signed-off-by:
-
Horia Geant? authored
commit 5fa7dadc upstream. Fixes: 1d11911a ("crypto: talitos - fix warning: 'alg' may be used uninitialized in this function") Signed-off-by:
Horia Geanta <horia.geanta@freescale.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Brian Norris authored
commit 073db4a5 upstream. On A MIPS 32-cores machine a BUG_ON was triggered because some acesses to mtd->usecount were done without taking mtd_table_mutex. kernel: Call Trace: kernel: [<ffffffff80401818>] __put_mtd_device+0x20/0x50 kernel: [<ffffffff804086f4>] blktrans_release+0x8c/0xd8 kernel: [<ffffffff802577e0>] __blkdev_put+0x1a8/0x200 kernel: [<ffffffff802579a4>] blkdev_close+0x1c/0x30 kernel: [<ffffffff8022006c>] __fput+0xac/0x250 kernel: [<ffffffff80171208>] task_work_run+0xd8/0x120 kernel: [<ffffffff8012c23c>] work_notifysig+0x10/0x18 kernel: kernel: Code: 2442ffff ac8202d8 000217fe <00020336> dc820128 10400003 00000000 0040f809 00000000 kernel: ---[ end trace 080fbb4579b47a73 ]--- Fixed by taking the mutex in blktrans_open and blktrans_release. Note that this locking is already suggested in include/linux/mtd/blktrans.h: struct mtd_blktrans_ops { ... /* Called with mtd_table_mutex held; no race with add/remove */ int (*open)(struct mtd_blktrans_dev *dev); void (*release)(struct mtd_blktrans_dev *dev); ... }; But we weren't following it. Originally reported by (and patched by) Zhang and Giuseppe, independently. Improved and rewritten. Reported-by:
Zhang Xingcai <zhangxingcai@huawei.com> Reported-by:
Giuseppe Cantavenera <giuseppe.cantavenera.ext@nokia.com> Tested-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 1fa2337a upstream. The maximum size for a DiSEqC command is 6, according to the userspace API. However, the code allows to write up much more values: drivers/media/dvb-frontends/cx24116.c:983 cx24116_send_diseqc_msg() error: buffer overflow 'd->msg' 6 <= 23 Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 12f4543f upstream. The maximum size for a DiSEqC command is 6, according to the userspace API. However, the code allows to write up to 7 values: drivers/media/dvb-frontends/s5h1420.c:193 s5h1420_send_master_cmd() error: buffer overflow 'cmd->msg' 6 <= 7 Signed-off-by:
-
Peter Zijlstra authored
commit 5de2755c upstream. Because we drop cpu_base->lock around calling hrtimer::function, it is possible for hrtimer_start() to come in between and enqueue the timer. If hrtimer::function then returns HRTIMER_RESTART we'll hit the BUG_ON because HRTIMER_STATE_ENQUEUED will be set. Since the above is a perfectly valid scenario, remove the BUG_ON and make the enqueue_hrtimer() call conditional on the timer not being enqueued already. NOTE: in that concurrent scenario its entirely common for both sites to want to modify the hrtimer, since hrtimers don't provide serialization themselves be sure to provide some such that the hrtimer::function and the hrtimer_start() caller don't both try and fudge the expiration state at the same time. To that effect, add a WARN when someone tries to forward an already enqueued timer, the most common way to change the expiry of self restarting timers. Ideally we'd put the WARN in everything modifying the expiry but most of that is inlines and we don't need the bloat. Fixes: 2d44ae4d ("hrtimer: clean up cpu->base locking tricks") Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ben Segall <bsegall@google.com> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20150415113105.GT5029@twins.programming.kicks-ass.netSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by:
-
- 06 Aug, 2015 14 commits
-
-
Ben Hutchings authored
-
Lv Zheng authored
commit 1d0a0b2f upstream. ACPICA commit b60612373a4ef63b64a57c124576d7ddb6d8efb6 For physical addresses, since the address may exceed 32-bit address range after calculation, we should use 0x%8.8X%8.8X instead of ACPI_PRINTF_UINT and ACPI_FORMAT_UINT64() instead of ACPI_FORMAT_NATIVE_UINT()/ACPI_FORMAT_TO_UINT(). This patch also removes above replaced macros as there are no users. This is a preparation to switch acpi_physical_address to 64-bit on 32-bit kernel builds. Link: https://github.com/acpica/acpica/commit/b6061237Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Dirk Behme <dirk.behme@gmail.com> [gdavis: Move tbprint.c changes to tbutils.c due to lack of commit "42f47869 ACPICA: Split table print utilities to a new a separate file" in linux-3.10.y] Signed-off-by:
George G. Davis <george_davis@mentor.com> Signed-off-by:
-
Lv Zheng authored
commit cc2080b0 upstream. ACPICA commit 7f06739db43a85083a70371c14141008f20b2198 For physical addresses, since the address may exceed 32-bit address range after calculation, we should use %8.8X%8.8X (see ACPI_FORMAT_UINT64()) to convert the %p formats. This is a preparation to switch acpi_physical_address to 64-bit on 32-bit kernel builds. Link: https://github.com/acpica/acpica/commit/7f06739dSigned-off-by:
-
Bob Moore authored
commit 0b232fca upstream. Cleanup output for Processor(). Length is a byte, not a word. Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Lv Zheng authored
commit 85e014b4 upstream. commit f254e3c5 upstream. ACPICA commit 7d9fd64397d7c38899d3dc497525f6e6b044e0e3 OSPMs like Linux expect an acpi_physical_address returning value from acpi_find_root_pointer(). This triggers warnings if sizeof (acpi_size) doesn't equal to sizeof (acpi_physical_address): drivers/acpi/osl.c:275:3: warning: passing argument 1 of 'acpi_find_root_pointer' from incompatible pointer type [enabled by default] In file included from include/acpi/acpi.h:64:0, from include/linux/acpi.h:36, from drivers/acpi/osl.c:41: include/acpi/acpixf.h:433:1: note: expected 'acpi_size *' but argument is of type 'acpi_physical_address *' This patch corrects acpi_find_root_pointer(). Link: https://github.com/acpica/acpica/commit/7d9fd643Signed-off-by:
-
Sam Ravnborg authored
commit d657784b upstream. Minimal fix to allow leon to be built. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Konrad Eisele <konrad@gaisler.com> Cc: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by:
-
Arnd Bergmann authored
commit 9f613601 upstream. __sync_fetch_and_and and __sync_fetch_and_or are functions that are provided by gcc and depending on the target architecture may be implemented in libgcc, which is not always available in the kernel. This leads to a build failure on ARMv5: drivers/built-in.o: In function `line6_pcm_release': :(.text+0x3bfe80): undefined reference to `__sync_fetch_and_and_4' drivers/built-in.o: In function `line6_pcm_acquire': :(.text+0x3bff30): undefined reference to `__sync_fetch_and_or_4' To work around this, we can use the kernel-provided cmpxchg macro. Build-tested only. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Markus Grabner <grabner@icg.tugraz.at> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
John David Anglin authored
commit ca0ad83d upstream. The Debian experimental linux source package (3.8.5-1) build fails with the following errors: ... MODPOST 2016 modules ERROR: "__ucmpdi2" [fs/btrfs/btrfs.ko] undefined! ERROR: "__ucmpdi2" [drivers/md/dm-verity.ko] undefined! The attached patch resolves this problem. It is based on the s390 implementation of ucmpdi2.c. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
hujianyang authored
commit 9aa272b4 upstream. Running mtd-utils/tests/ubi-tests/io_basic.c could cause soft lockup or watchdog reset. It is because *updatevol* will perform ubi_check_volume() after updating finish and this function will full scan the updated lebs if the volume is initialized as STATIC_VOLUME. This patch adds *cond_resched()* in the loop of lebs scan to avoid soft lockup. Helped by Richard Weinberger <richard@nod.at> [ 2158.067096] INFO: rcu_sched self-detected stall on CPU { 1} (t=2101 jiffies g=1606 c=1605 q=56) [ 2158.172867] CPU: 1 PID: 2073 Comm: io_basic Tainted: G O 3.10.53 #21 [ 2158.172898] [<c000f624>] (unwind_backtrace+0x0/0x120) from [<c000c294>] (show_stack+0x10/0x14) [ 2158.172918] [<c000c294>] (show_stack+0x10/0x14) from [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660) [ 2158.172936] [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660) from [<c002b480>] (update_process_times+0x38/0x64) [ 2158.172953] [<c002b480>] (update_process_times+0x38/0x64) from [<c005ff38>] (tick_sched_handle+0x54/0x60) [ 2158.172966] [<c005ff38>] (tick_sched_handle+0x54/0x60) from [<c00601ac>] (tick_sched_timer+0x44/0x74) [ 2158.172978] [<c00601ac>] (tick_sched_timer+0x44/0x74) from [<c003f348>] (__run_hrtimer+0xc8/0x1b8) [ 2158.172992] [<c003f348>] (__run_hrtimer+0xc8/0x1b8) from [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4) [ 2158.173007] [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4) from [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30) [ 2158.173022] [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30) from [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124) [ 2158.173036] [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124) from [<c0082bd8>] (generic_handle_irq+0x20/0x30) [ 2158.173049] [<c0082bd8>] (generic_handle_irq+0x20/0x30) from [<c000969c>] (handle_IRQ+0x64/0x8c) [ 2158.173060] [<c000969c>] (handle_IRQ+0x64/0x8c) from [<c0008544>] (gic_handle_irq+0x3c/0x60) [ 2158.173074] [<c0008544>] (gic_handle_irq+0x3c/0x60) from [<c02f0f80>] (__irq_svc+0x40/0x50) [ 2158.173083] Exception stack(0xc4043c98 to 0xc4043ce0) [ 2158.173092] 3c80: c4043ce4 00000019 [ 2158.173102] 3ca0: 1f8a865f c050ad10 1f8a864c 00000031 c04b5970 0003ebce 00000000 f3550000 [ 2158.173113] 3cc0: bf00bc68 00000800 0003ebce c4043ce0 c0186d14 c0186cb8 80000013 ffffffff [ 2158.173130] [<c02f0f80>] (__irq_svc+0x40/0x50) from [<c0186cb8>] (read_current_timer+0x4/0x38) [ 2158.173145] [<c0186cb8>] (read_current_timer+0x4/0x38) from [<1f8a865f>] (0x1f8a865f) [ 2183.927097] BUG: soft lockup - CPU#1 stuck for 22s! [io_basic:2073] [ 2184.002229] Modules linked in: nandflash(O) [last unloaded: nandflash] Signed-off-by:
Wang Kai <morgan.wang@huawei.com> Signed-off-by:
hujianyang <hujianyang@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Ralf Baechle authored
commit f05ff433 upstream. This is no longer needed with the fixed, new and improved definition of cpu_has_mips_r2_exec_hazard in <asm/cpu-features.h>. For a discussion, see http://patchwork.linux-mips.org/patch/9539/. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Ralf Baechle authored
commit 9cdf30bd upstream. Returns a non-zero value if the current processor implementation requires an IHB instruction to deal with an instruction hazard as per MIPS R2 architecture specification, zero otherwise. For a discussion, see http://patchwork.linux-mips.org/patch/9539/. Signed-off-by:
-
Alexander Sverdlin authored
commit 73bf3c2a upstream. udelay() in PCI/PCIe read/write callbacks cause 30ms IRQ latency on Octeon platforms because these operations are called from PCI_OP_READ() and PCI_OP_WRITE() under raw_spin_lock_irqsave(). Signed-off-by:
-
Lars Persson authored
commit 4d46a67a upstream. The lazy cache flushing implemented in the MIPS kernel suffers from a race condition that is exposed by do_set_pte() in mm/memory.c. A pre-condition is a file-system that writes to the page from the CPU in its readpage method and then calls flush_dcache_page(). One example is ubifs. Another pre-condition is that the dcache flush is postponed in __flush_dcache_page(). Upon a page fault for an executable mapping not existing in the page-cache, the following will happen: 1. Write to the page 2. flush_dcache_page 3. flush_icache_page 4. set_pte_at 5. update_mmu_cache (commits the flush of a dcache-dirty page) Between steps 4 and 5 another thread can hit the same page and it will encounter a valid pte. Because the data still is in the L1 dcache the CPU will fetch stale data from L2 into the icache and execute garbage. This fix moves the commit of the cache flush to step 3 to close the race window. It also reduces the amount of flushes on non-executable mappings because we never enter __flush_dcache_page() for non-aliasing CPUs. Regressions can occur in drivers that mistakenly relies on the flush_dcache_page() in get_user_pages() for DMA operations. [ralf@linux-mips.org: Folded in patch 9346 to fix highmem issue.] Signed-off-by:
Lars Persson <larper@axis.com> Cc: linux-mips@linux-mips.org Cc: paul.burton@imgtec.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9346/ Patchwork: https://patchwork.linux-mips.org/patch/9738/Signed-off-by:
-
Ben Greear authored
commit 34376a50 upstream. The stop machine logic can lock up if all but one of the migration threads make it through the disable-irq step and the one remaining thread gets stuck in __do_softirq. The reason __do_softirq can hang is that it has a bail-out based on jiffies timeout, but in the lockup case, jiffies itself is not incremented. To work around this, re-add the max_restart counter in __do_irq and stop processing irqs after 10 restarts. Thanks to Tejun Heo and Rusty Russell and others for helping me track this down. This was introduced in 3.9 by commit c10d7367 ("softirq: reduce latencies"). It may be worth looking into ath9k to see if it has issues with its irq handler at a later date. The hang stack traces look something like this: ------------[ cut here ]------------ WARNING: at kernel/watchdog.c:245 watchdog_overflow_callback+0x9c/0xa7() Watchdog detected hard LOCKUP on cpu 2 Modules linked in: ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nfsv4 auth_rpcgss nfs fscache nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc pktgen lockd sunrpc] Pid: 23, comm: migration/2 Tainted: G C 3.9.4+ #11 Call Trace: <NMI> warn_slowpath_common+0x85/0x9f warn_slowpath_fmt+0x46/0x48 watchdog_overflow_callback+0x9c/0xa7 __perf_event_overflow+0x137/0x1cb perf_event_overflow+0x14/0x16 intel_pmu_handle_irq+0x2dc/0x359 perf_event_nmi_handler+0x19/0x1b nmi_handle+0x7f/0xc2 do_nmi+0xbc/0x304 end_repeat_nmi+0x1e/0x2e <<EOE>> cpu_stopper_thread+0xae/0x162 smpboot_thread_fn+0x258/0x260 kthread+0xc7/0xcf ret_from_fork+0x7c/0xb0 ---[ end trace 4947dfa9b0a4cec3 ]--- BUG: soft lockup - CPU#1 stuck for 22s! [migration/1:17] Modules linked in: ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nfsv4 auth_rpcgss nfs fscache nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc pktgen lockd sunrpc] irq event stamp: 835637905 hardirqs last enabled at (835637904): __do_softirq+0x9f/0x257 hardirqs last disabled at (835637905): apic_timer_interrupt+0x6d/0x80 softirqs last enabled at (5654720): __do_softirq+0x1ff/0x257 softirqs last disabled at (5654725): irq_exit+0x5f/0xbb CPU 1 Pid: 17, comm: migration/1 Tainted: G WC 3.9.4+ #11 To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M. RIP: tasklet_hi_action+0xf0/0xf0 Process migration/1 Call Trace: <IRQ> __do_softirq+0x117/0x257 irq_exit+0x5f/0xbb smp_apic_timer_interrupt+0x8a/0x98 apic_timer_interrupt+0x72/0x80 <EOI> printk+0x4d/0x4f stop_machine_cpu_stop+0x22c/0x274 cpu_stopper_thread+0xae/0x162 smpboot_thread_fn+0x258/0x260 kthread+0xc7/0xcf ret_from_fork+0x7c/0xb0 Signed-off-by:
Ben Greear <greearb@candelatech.com> Acked-by:
Tejun Heo <tj@kernel.org> Acked-by:
Pekka Riikonen <priikone@iki.fi> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
