- 04 Aug, 2005 4 commits
-
-
Len Brown authored
-
Len Brown authored
-
David Shaohua Li authored
ACPI now uses kmalloc(...,GPF_ATOMIC) during suspend/resume. http://bugzilla.kernel.org/show_bug.cgi?id=3469Signed-off-by:
David Shaohua Li <shaohua.li@intel.com> Signed-off-by:
Len Brown <len.brown@intel.com>
-
Len Brown authored
http://bugzilla.kernel.org/show_bug.cgi?id=4923Signed-off-by:
-
- 03 Aug, 2005 6 commits
-
-
Len Brown authored
-
Luming Yu authored
For 2.6.12 behaviour, this (EXPERIMENTAL) driver should not be built. Update the driver source with latest from Luming. Signed-off-by:
Luming Yu <luming.yu@intel.com> Signed-off-by:
-
Alexey Starikovskiy authored
Signed-off-by Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by Len Brown <len.brown@intel.com>
-
Luming Yu authored
Burst mode isn't ready for prime time, but can be enabled for test via "ec_burst=1" Signed-off-by:
-
David Shaohua Li authored
This patch disables the PCI Interrupt Link refernece counts, which should not co-exist with the 2.6.12 irq_router.resume method or else a double acpi_pci_link_set() could result on resume. Signed-off-by:
-
Len Brown authored
Signed-off-by:
-
- 02 Aug, 2005 30 commits
-
-
Linus Torvalds authored
Ok, let's get it right this time
-
Mike Kravetz authored
If CONFIG_NUMA is set, some POWER 4 systems will fail to boot. This is because of special processing needed to handle invalid node IDs (0xffff) on POWER 4. My previous patch to handle memory 'holes' within nodes forgot to add this special case for POWER 4 in one place. In reality, I'm not sure that configuring the kernel for NUMA on POWER 4 makes much sense. Are there POWER 4 based systems with NUMA characteristics that are presented by the firmware? But, distros want one kernel for all systems so NUMA is on by default in their kernels. The patch handles those cases. Signed-off-by:
Mike Kravetz <kravetz@us.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Rusty Russell authored
The module code assumes noone will ever ask for a per-cpu area more than SMP_CACHE_BYTES aligned. However, as these cases show, gcc asks sometimes asks for 32-byte alignment for the per-cpu section on a module, and if CONFIG_X86_L1_CACHE_SHIFT is 4, we hit that BUG_ON(). This is obviously an unusual combination, as there have been few reports, but better to warn than die. See: http://www.ussg.iu.edu/hypermail/linux/kernel/0409.0/0768.html And more recently: http://bugs.gentoo.org/show_bug.cgi?id=97006Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Anton Blanchard authored
Dont include asm-generic/topology.h unconditionally, we end up overriding all the ppc64 specific functions when NUMA is on. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
-
Andrew Morton authored
Fix bug found by Grant Coady <lkml@dodo.com.au>'s autobuild setup. shmem_set_policy() and shmem_get_policy() are macros if !CONFIG_SHMEM, so this doesn't work. Signed-off-by:
-
Andrew Morton authored
Fix bug found by Grant Coady <lkml@dodo.com.au>'s autobuild setup. Signed-off-by:
-
Eric Dumazet authored
A kernel BUG() is triggered by a call to set_mempolicy() with a negative first argument. This is because the mode is declared as an int, and the validity check doesnt check < 0 values. Alternatively, mode could be declared as unsigned int or unsigned long. Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Hugh Dickins authored
x86_64 has a large sparse gate area between VSYSCALL_START and VSYSCALL_END, not all of it presently backed by pmds. Alexander Nyberg has found that in some circumstances gdb may try to ptrace here, and hit get_user_pages BUG_ON. It seems odd that gdb should be accessing here, but it certainly shouldn't crash in this way: relax BUG_ON to -EFAULT. Fixes kernel bugzilla #4801. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Roman Zippel authored
If there was a read error, the bnode might miss some pages, so skip them. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Roman Zippel authored
If inode size hasn't changed, don't do anything further in truncate, which also prevents a dirty inode, what might upset some readonly devices quite badly. Signed-off-by:
-
Adrian Bunk authored
We don't want these to be global functions. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch does correct radio chip autodetection to avoid misdetecting mt20xx microtune as tea5767 chip. Signed-off-by:
Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by:
-
Mark Haverkamp authored
Martin Drab found that he could get aacraid timeouts with high load on his controller / disk drive combinations. After some experimentation Mark Salyzyn has come up with a patch to reduce the default max_sectors to something that will keep the controller from being overloaded and will eliminate the timeout issues. Signed-off-by:
Mark Haverkamp <markh@osdl.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by:
Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by:
-
Hirokazu Takata authored
There was a scheduling problem of the m32r SMP kernel; A process rarely stopped and gave no responding but the other process have been handled by the other CPU still lives, then if we did something in the other terminal or something like that, the stopped process came back to life and continued its operation... (ex. LMbench: lat_sig) In the m32r SMP kernel, a local-timer event is delivered by using an IPI(inter processor interrupts); LOCAL_TIMER_IPI. And a function smp_send_timer() is prepared to send the LOCAL_TIMER_IPI from the current CPU to the other CPUs. The funtion smp_send_timer() was placed and used in do_IRQ() in former times (before 2.6.10-rc3-mm1 kernel), however, it was unintentionally removed when arch/m32r/kernel/irq.c was modified to employ the generic hardirq framework (CONFIG_GENERIC_HARDIRQ) in my previous patch. [PATCH 2.6.10-rc3-mm1] m32r: Use generic hardirq framework http://www.ussg.iu.edu/hypermail/linux/kernel/0412.2/0358.html The following patch fixes the above problem. Signed-off-by:
Hitoshi Yamamoto <hitoshiy@isl.melco.co.jp> Signed-off-by:
Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
Martin Schwidefsky authored
Add system calls for io priorities and inotify. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Disable pseudo page fault handling before starting the new kernel and try to use diag308 to reset the machine. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Eugene Surovegin authored
Add missing 4xx EMAC data sysfs nodes. Signed-off-by:
Eugene Surovegin <ebs@ebshome.net> Signed-off-by:
-
Matt Porter authored
Add Bamboo platform defconfig Signed-off-by:
Wade Farnsworth <wfarnsworth@mvista.com> Signed-off-by:
Matt Porter <mporter@kernel.crashing.org> Signed-off-by:
-
Matt Porter authored
Add Bamboo platform support. This is an AMCC 440EP-based reference platform. Signed-off-by:
-
Matt Porter authored
Add PPC440EP core support. PPC440EP is a PPC440-based SoC with a classic PPC FPU and another set of peripherals. Signed-off-by:
-
Kumar Gala authored
Marked APUS and GEMINI as BROKEN since they do not build at the platform level. We have requested that the maintainers of these boards/platforms fix them by the time 2.6.15 is released or we plan on concerning them unmaintained and thus removing them. Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Signed-off-by:
-
Denis Vlasenko authored
cs89x0 talks a lot at boot. Seems like debug leftover. This patch downgrades printks to KERN_DEBUG. While we're at it, make these messages a bit less obscure. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
NeilBrown authored
The default resync_max_sector is set to "mddev->size << 1". If the raid-personality-module updates mddev->size, it must update resync_max_sectors too. Signed-off-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
Benjamin Herrenschmidt authored
The code that sets the altivec capability of the CPU based on firmware informations can enable altivec when the kernel has CONFIG_ALTIVEC disabled. This results in "interesting" crashes. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Jackson authored
Improve the likelihood that someone submitting a patch will notify the MAN-PAGES maintainer. This is a follow-up to comments on the July 29 lkml email thread: "Broke nice range for RLIMIT NICE" Signed-off-by:
Paul Jackson <pj@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by:
-
Michael Kerrisk authored
Michael maintains the kernel manpages. He wants us to tell him when we change or augment the userspace API. Add his contact details to MAINTAINERS. Signed-off-by:
-
Michael Krufky authored
Peter Missel: - Add support for the SVideo input on the GDI Black Gold. Mauro Carvalho Chehab: - Linux/version.h removed. Replaced by linux/utsname.h Michael Krufky: - Added analog support for DViCO FusionHDTV5 Gold. CC: Peter Missel <peter.missel@onlinehome.de> Signed-off-by:
Michael Krufky <mkrufky@m1k.net> Signed-off-by:
-
Mauro Carvalho Chehab authored
- Fixed some bttv card numbers. - BTTV and SAA7134 version numbers incremented to reflect changes. - pci_dma_supported() is called after pci_set_dma_mask() which already did check that for us. This patch removes the unneeded call to pci_dma_supported() at bttv-driver.c - Ensure a sufficient I2C bus idle time between 2 messages for saa7134-i2c.c - It is important to write at first to MO_GP3_IO for cx88-tvaudio.c - Use try_to_freeze() instead of refrigerator at msp3400.c - Recognizing the MFPE05-2 Tuner at tveeprom.c - Add new parameter to help identify radio chipsets at tuner module: show_i2c=1 will show 16 reading bytes from detected tuners. - BTTV does generate some Unimplemented IOCTL log at tuner module: 0x40046d11(dir=1,tp=0x6d,nr=17,sz=4) means that it is sending MSP3400 calls to non-msp3400 tuners. Warning eliminated. VIDIOSAUDIO is also called, so debug messages updated. It is still requiring IOCTL implementation. - Added two more tuners. - Add support for the SVideo input on the GDI Black Gold. Signed-off-by:
Peter Missel <peter.missel@onlinehome.de> Signed-off-by:
Graham Bevan <graham.bevan@ntlworld.com> Signed-off-by:
Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by:
-
Eric Lammerts authored
We know that the randomisation slows down some workloads on Transmeta CPUs by quite large amounts. We think it's because the CPU needs to recode the same x86 instructions when they pop up at a different virtual address after a fork+exec. So disable randomization by default on those CPUs. Signed-off-by:
-
Andrew Morton authored
Make it compile with CONFIG_PM=n Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
