- 24 May, 2018 13 commits
-
-
Leon Romanovsky authored
Remove various prints of VMA pointers. Reported-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com>
-
oulijun authored
The lower 15 bit of paramter of db structure means different meanings when db type is sq, rq and srq. Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
Mike Marciniszyn authored
The following error occurs in a debug build when running MPI PSM: [ 307.415911] WARNING: CPU: 4 PID: 23867 at lib/dma-debug.c:1158 check_unmap+0x4ee/0xa20 [ 307.455661] ib_qib 0000:05:00.0: DMA-API: device driver failed to check map error[device address=0x00000000df82b000] [size=4096 bytes] [mapped as page] [ 307.517494] Modules linked in: [ 307.531584] ib_isert iscsi_target_mod ib_srpt target_core_mod rpcrdma sunrpc ib_srp scsi_transport_srp scsi_tgt ib_iser libiscsi ib_ipoib scsi_transport_iscsi rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_qib intel_powerclamp coretemp rdmavt intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel ipmi_ssif ib_core aesni_intel sg ipmi_si lrw gf128mul dca glue_helper ipmi_devintf iTCO_wdt gpio_ich hpwdt iTCO_vendor_support ablk_helper hpilo acpi_power_meter cryptd ipmi_msghandler ie31200_edac shpchp pcc_cpufreq lpc_ich pcspkr ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci crct10dif_pclmul crct10dif_common drm crc32c_intel libahci tg3 libata serio_raw ptp i2c_core [ 307.846113] pps_core dm_mirror dm_region_hash dm_log dm_mod [ 307.866505] CPU: 4 PID: 23867 Comm: mpitests-IMB-MP Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1 [ 307.911178] Hardware name: HP ProLiant DL320e Gen8, BIOS J05 11/09/2013 [ 307.944206] Call Trace: [ 307.956973] [<ffffffffbd9e915b>] dump_stack+0x19/0x1b [ 307.982201] [<ffffffffbd2a2f58>] __warn+0xd8/0x100 [ 308.005999] [<ffffffffbd2a2fdf>] warn_slowpath_fmt+0x5f/0x80 [ 308.034260] [<ffffffffbd5f667e>] check_unmap+0x4ee/0xa20 [ 308.060801] [<ffffffffbd41acaa>] ? page_add_file_rmap+0x2a/0x1d0 [ 308.090689] [<ffffffffbd5f6c4d>] debug_dma_unmap_page+0x9d/0xb0 [ 308.120155] [<ffffffffbd4082e0>] ? might_fault+0xa0/0xb0 [ 308.146656] [<ffffffffc07761a5>] qib_tid_free.isra.14+0x215/0x2a0 [ib_qib] [ 308.180739] [<ffffffffc0776bf4>] qib_write+0x894/0x1280 [ib_qib] [ 308.210733] [<ffffffffbd540b00>] ? __inode_security_revalidate+0x70/0x80 [ 308.244837] [<ffffffffbd53c2b7>] ? security_file_permission+0x27/0xb0 [ 308.266025] qib_ib0.8006: multicast join failed for ff12:401b:8006:0000:0000:0000:ffff:ffff, status -22 [ 308.323421] [<ffffffffbd46f5d3>] vfs_write+0xc3/0x1f0 [ 308.347077] [<ffffffffbd492a5c>] ? fget_light+0xfc/0x510 [ 308.372533] [<ffffffffbd47045a>] SyS_write+0x8a/0x100 [ 308.396456] [<ffffffffbd9ff355>] system_call_fastpath+0x1c/0x21 The code calls a qib_map_page() which has never correctly tested for a mapping error. Fix by testing for pci_dma_mapping_error() in all cases and properly handling the failure in the caller. Additionally, streamline qib_map_page() arguments to satisfy just the single caller. Cc: <stable@vger.kernel.org> Reviewed-by:
Alex Estrin <alex.estrin@intel.com> Tested-by:
Don Dutile <ddutile@redhat.com> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Alex Estrin authored
The following error message occurs on a target host in a debug build during session login: [ 3524.411874] WARNING: CPU: 5 PID: 12063 at lib/dma-debug.c:1207 check_sync+0x4ec/0x5b0 [ 3524.421057] infiniband hfi1_0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000000000000] [size=76 bytes] ......snip ..... [ 3524.535846] CPU: 5 PID: 12063 Comm: iscsi_np Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1 [ 3524.546764] Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.2.6 06/08/2015 [ 3524.555740] Call Trace: [ 3524.559102] [<ffffffffa5fe915b>] dump_stack+0x19/0x1b [ 3524.565477] [<ffffffffa58a2f58>] __warn+0xd8/0x100 [ 3524.571557] [<ffffffffa58a2fdf>] warn_slowpath_fmt+0x5f/0x80 [ 3524.578610] [<ffffffffa5bf5b8c>] check_sync+0x4ec/0x5b0 [ 3524.585177] [<ffffffffa58efc3f>] ? set_cpus_allowed_ptr+0x5f/0x1c0 [ 3524.592812] [<ffffffffa5bf5cd0>] debug_dma_sync_single_for_cpu+0x80/0x90 [ 3524.601029] [<ffffffffa586add3>] ? x2apic_send_IPI_mask+0x13/0x20 [ 3524.608574] [<ffffffffa585ee1b>] ? native_smp_send_reschedule+0x5b/0x80 [ 3524.616699] [<ffffffffa58e9b76>] ? resched_curr+0xf6/0x140 [ 3524.623567] [<ffffffffc0879af0>] isert_create_send_desc.isra.26+0xe0/0x110 [ib_isert] [ 3524.633060] [<ffffffffc087af95>] isert_put_login_tx+0x55/0x8b0 [ib_isert] [ 3524.641383] [<ffffffffa58ef114>] ? try_to_wake_up+0x1a4/0x430 [ 3524.648561] [<ffffffffc098cfed>] iscsi_target_do_tx_login_io+0xdd/0x230 [iscsi_target_mod] [ 3524.658557] [<ffffffffc098d827>] iscsi_target_do_login+0x1a7/0x600 [iscsi_target_mod] [ 3524.668084] [<ffffffffa59f9bc9>] ? kstrdup+0x49/0x60 [ 3524.674420] [<ffffffffc098e976>] iscsi_target_start_negotiation+0x56/0xc0 [iscsi_target_mod] [ 3524.684656] [<ffffffffc098c2ee>] __iscsi_target_login_thread+0x90e/0x1070 [iscsi_target_mod] [ 3524.694901] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.705446] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.715976] [<ffffffffc098ca78>] iscsi_target_login_thread+0x28/0x60 [iscsi_target_mod] [ 3524.725739] [<ffffffffa58d60ff>] kthread+0xef/0x100 [ 3524.732007] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.739540] [<ffffffffa5fff1b7>] ret_from_fork_nospec_begin+0x21/0x21 [ 3524.747558] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.755088] ---[ end trace 23f8bf9238bd1ed8 ]--- [ 3595.510822] iSCSI/iqn.1994-05.com.redhat:537fa56299: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION. The code calls dma_sync on login_tx_desc->dma_addr prior to initializing it with dma-mapped address. login_tx_desc is a part of iser_conn structure and is used only once during login negotiation, so the issue is fixed by eliminating dma_sync call for this buffer using a special case routine. Cc: <stable@vger.kernel.org> Reviewed-by:
-
Mike Marciniszyn authored
Given we are dealing with nano-second level timers, when the timer pops, ensure it happens on the CPU which caused the timer to be set in the first place. This avoids excessive jitter from the desired expiration time by avoiding the cost of switching our context to another CPU that is cache cold for this given timer. Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
For errorinfo MAD requests, the response has a 0 port number left over from a memset. Instead we should always set the port number in the response. Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
The knowledge of the internal workings of the expect receive is too distributed. Fix by: - right size several rcd fields associated with expect receive - making an init entrance to init all the lists - consolidate all the allocations into an array anchored in the rcd Reviewed-by:
-
Don Hiatt authored
Add trace support for 16B Management Packets. Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Don Hiatt <don.hiatt@intel.com> Signed-off-by:
-
Don Hiatt authored
16B Management Packets (L4=0x08) replace the BTH and DETH of normal MAD packet packets with a header containing the the source and destination queue pair numbers; fields that were originally retrieved from the BTH/DETH are now populated from this header as well as from the 16B LRH (e.g. pkey). 16B Management Packets are used as an optimized management format on 16B fabrics. These management packets have an opcode of IB_OPCODE_UD_SEND_ONLY, a fixed 3Byte pad, and a header length of 24Bytes. The decision as to when we send a management packet is based upon either the source or destination queue pair number being 0 or 1. Reviewed-by:
-
Don Hiatt authored
Add 16B Management Packet definition. This optimized packet format replaces the ib_other_headers and BTH with a source and destination QP number. To support these packets we introduce struct opa_16b_mgmt into the struct hfi1_16b_header. This packet format is only used for MAD packets using the IB_OPCODE_UD_SEND_ONLY opcode on QP0/1. The original 16B implementation failed to use 16B management packets so now we add their definition. Reviewed-by:
-
Steve Wise authored
Add a table of important fields from the fw_ri_tpte structure to the mr resource tracking table. This is helpful in debugging. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Steve Wise authored
Add a table of important fields from the c4iw_cq* structures to the cq resource tracking table. This is helpful in debugging. Signed-off-by:
-
Steve Wise authored
Add a table of important fields from the c4iw_ep* structures to the cm_id resource tracking table. This is helpful in debugging. Signed-off-by:
-
- 22 May, 2018 3 commits
-
-
Steve Wise authored
Add a helper function for iwarp drivers to be able to map an rdma_cm_id to an iw_cm_id. This is useful for dumping driver specific NLDEV/RESTRACK connection state. Add a helper to return the rdma_cm_id pointer from the rdma_restack pointer. This is needed for rdma drivers to map a res entry back to the public rdma_cm_id struct. Signed-off-by:
-
Steve Wise authored
In active side connections, the provider_data field is not getting set. This will be used in a subsequent patch to dump state, so always set it. Signed-off-by:
-
Doug Ledford authored
We do a light flush on CLIENT_REREG and SM_CHANGE events. This goes through and marks paths invalid. But we weren't always checking for this validity when we needed to, and so we could keep using a path marked invalid. What's more, once we establish a path with a valid ah, we put a pointer to the ah in the neigh struct directly, so even if we mark the path as invalid, as long as the neigh has a direct pointer to the ah, it keeps using the old, outdated ah. To fix this we do several things. 1) Put the valid flag in the ah instead of the path struct, so when we put the ah pointer directly in the neigh struct, we can easily check the validity of the ah on send events. 2) Check the neigh->ah and neigh->ah->valid elements in the needed places, and if we have an ah, but it's invalid, then invoke a refresh of the ah. 3) Fix the various places that check for path, but didn't check for path->valid (now path->ah && path->ah->valid). Reported-by:
Evgenii Smirnov <evgenii.smirnov@profitbricks.com> Fixes: ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events") Signed-off-by:
-
- 17 May, 2018 10 commits
-
-
Zhu Yanjun authored
In the exit branch, WARN_ON_ONCE is called to show stack. So it is not necessary to call WARN_ON_ONCE before going to exit. Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by:
-
Yixian Liu authored
This patch adds the support of 64KB page size for hip08 in kernel. Signed-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
In ipoib_mcast_restart_task() the netif_addr_lock() is invoked prior local_irq_save(). netif_addr_lock() should not be invoked in interrupt disabled section, only in BH disabled sections. The priv->lock is always acquired with disabled interrupts. The only place where netif_addr_lock() and priv->lock nest ist ipoib_mcast_restart_task(). Drop the local_irq_save() and acquire priv->lock with spin_lock_irq() inside the netif_addr locked section. It's safe to do so because the caller is either a worker function or __ipoib_ib_dev_flush() which are both calling with interrupts enabled (and since BH is enabled here, too so netif_addr_lock_bh() needs to be used). Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Ariel Levkovich authored
This patch reports the device's capbilities to offload encapsulated MPLS tunnel protocols to user-space: - Capability to offload MPLS over GRE. - Capability to offload MPLS over UDP. Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Ariel Levkovich <lariel@mellanox.com> Signed-off-by:
-
Ariel Levkovich authored
This patch introduces support for the MPLS flow spec and allows the creation of rules that are matching on the MPLS label. Applying the rule matching depends on the flow specs order and the location of the MPLS in the spec list as there are different configurations to be made in the device in the cases of MPLSoGRE and MPLSoUDP vs. non-encapsulated MPLS. Reviewed-by:
-
Ariel Levkovich authored
This patch introduces support for the GRE flow spec and allowing the creation of rules based on the protocol and key fields that are part of GRE protocol header. Reviewed-by:
-
Ariel Levkovich authored
Add a new MPLS steering match filter that can match against a single MPLS tag field. Since the MPLS header can reside in different locations in the packet's protocol stack as well as be encapsulated with a tunnel protocol, it is required to know the exact location of the header in the protocol stack. Therefore, when including the MPLS protocol spec in the specs list, it is mandatory to provide the list in an ordered manner, so that it represents the actual header order in a matching packet. Drivers that process the spec list and apply the matching rule should treat the position of the MPLS spec in the spec list as the actual location of the MPLS label in the packet's protocol stack. Reviewed-by:
-
Ariel Levkovich authored
Add ib_uverbs_flow_spec_mpls to define a rule to match the MPLS protocol. The spec includes the generic specs header, type, size and reserved fields while the filter itself is defined as ib_uverbs_flow_mpls_filter and includes a single 32bit field named 'label' which consists of: Bits 0:19 - The MPLS label. Bits 20:22 - Traffic class field. Bit 23 - Bottom of stack bit. Bits 24:31 - Time to live (TTL) field. Reviewed-by:
-
Ariel Levkovich authored
Adding a new GRE steering match filter that can match against key and protocol fields. Reviewed-by:
-
Ariel Levkovich authored
Add ib_uverbs_flow_spec_gre to define a rule to match the GRE encapsulation protocol. The spec includes the generic specs header, type, size and reserved fields while the filter itself is defined as ib_uverbs_flow_gre_filter and includes: 1. Checksum present bit, key present bit and version bits in a single 16bit field. 2. Protocol type field - Indicates the ether protocol type of the encapsulated payload. 3. Key field - present if key bit is set and contains an application specific key value. Reviewed-by:
-
- 16 May, 2018 4 commits
-
-
Parav Pandit authored
During CM request processing flow, ah_attr is initialized twice. First based on wc. Secondly based on primary path record. ah_attr initialization from path record can fail, which leads to ah_attr zeroed out. Therefore, always initialize ah_attr on stack during reinitialization phase. If ah_attr init is successful, use the new ah_attry by overwriting the old one. If the ah_attr init fails, continue to use the last ah_attr. Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Parav Pandit authored
During CM LAP processing, ah_attr is reinitialized on receiving LAP request. First likely during CM request processing. ah_attr might get zero out if LAP processing fails. Therefore, attempt to create new ah_attr for the LAP message. If the initialization fails, continue with older ah_attr. If the initialization passes, consider the new ah_attr by overwriting the older one. Signed-off-by:
-
Parav Pandit authored
AH attribute of the cm_id can be overwritten if LAP message is received on CM request which is in progress. This bug got introduced to avoid sleeping when spin lock is held as part of commit in Fixes tag. Therefore validate the cm_id state first and continue to perform AV ah_attr initialization. Given that Aleternative path related messages are not supported for RoCE, init_av_from_response/path is such messages are ok to be called from blocking context. Fixes: 33f93e1e ("IB/cm: Fix sleeping while spin lock is held") Signed-off-by:
-
Shiraz Saleem authored
If two listeners are created with different IP's but same port, the second rdma_listen fails due to a duplicate port entry being added from the CQP add APBVT OP. commit f16dc0aa ("i40iw: Add support for port reuse on active side connections") does not account for listener side port reuse. Check for duplicate port before invoking the CQP command to add APBVT entry and delete the entry only if the port is not in use. Additionally, consolidate all port-reuse logic into i40iw_manage_apbvt. Fixes: f16dc0aa ("i40iw: Add support for port reuse on active side connections") Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
- 15 May, 2018 8 commits
-
-
Yuval Shaia authored
"return" statement at the end of void function is redundant, removing it. Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by:
Qing Huang <qing.huang@oracle.com> Signed-off-by:
-
Steve Wise authored
Remove sq/rq wr_id attributes because typically they are pointers and we don't want to pass up kernel pointers. Fixes: 056f9c7f ("iw_cxgb4: dump detailed driver-specific QP information") Signed-off-by:
-
Steve Wise authored
Remove mr iova attribute because we don't want to pass up kernel pointers. Fixes: fccec5b8 ("RDMA/nldev: provide detailed MR information") Signed-off-by:
-
Steve Wise authored
Fixes: 056f9c7f ("iw_cxgb4: dump detailed driver-specific QP information") Signed-off-by:
-
Doug Ledford authored
During this merge window, we added support for addition RDMA netlink operations. Unfortunately, we added the items in the middle of our uapi enum. Fix that before final release. Fixes: da5c8507 ("RDMA/nldev: add driver-specific resource tracking") Signed-off-by:
-
Doug Ledford authored
A recent patch set to rework the usage of debugfs and to add fault injection capabilities via debugfs files to the hfi1 driver introduced a build error that only shows up when debugfs is fully disabled. The patchset mistakenly defines some empty stub functions in two different headers when debugfs is disabled. Remove the set that shouldn't have been there to resolve the issue. Fixes: a74d5307 ("IB/hfi1: Rework fault injection machinery") Signed-off-by:
-
Ben Hutchings authored
DMA_VIRT_OPS requires that dma_addr_t is at least as wide as a pointer, which is expressed as a dependency on !64BIT || ARCH_DMA_ADDR_T_64BIT. For parisc64 this is not true, and if these IB modules are enabled, kconfig warns: WARNING: unmet direct dependencies detected for DMA_VIRT_OPS Depends on [n]: HAS_DMA [=y] && (!64BIT [=y] || ARCH_DMA_ADDR_T_64BIT) Selected by [m]: - INFINIBAND_RDMAVT [=m] && INFINIBAND [=m] && 64BIT [=y] && PCI [=y] - RDMA_RXE [=m] && INET [=y] && PCI [=y] && INFINIBAND [=m] Add dependencies to fix this. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Doug Ledford authored
Merge tag 'mlx5-updates-2018-05-07' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next mlx5-updates-2018-05-07 mlx5 core driver misc cleanups and updates: - fix spelling mistake: "modfiy" -> "modify" - Cleanup unused field in Work Queue parameters - dump_command mailbox length printed - Refactor num of blocks in mailbox calculation - Decrease level of prints about non-existent MKEY - remove some extraneous spaces in indentations Pulling the same update already pulled into net-next by Dave Miller. Signed-off-by:
-
- 09 May, 2018 2 commits
-
-
Brian Welty authored
Moving receive-side WQE allocation logic into rdmavt will allow further code reuse between qib and hfi1 drivers. Reviewed-by:
Brian Welty <brian.welty@intel.com> Signed-off-by:
Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
-
Sebastian Sanchez authored
Currently the driver doesn't support completion vectors. These are used to indicate which sets of CQs should be grouped together into the same vector. A vector is a CQ processing thread that runs on a specific CPU. If an application has several CQs bound to different completion vectors, and each completion vector runs on different CPUs, then the completion queue workload is balanced. This helps scale as more nodes are used. Implement CQ completion vector support using a global workqueue where a CQ entry is queued to the CPU corresponding to the CQ's completion vector. Since the workqueue is global, it's guaranteed to always be there when queueing CQ entries; Therefore, the RCU locking for cq->rdi->worker in the hot path is superfluous. Each completion vector is assigned to a different CPU. The number of completion vectors available is computed by taking the number of online, physical CPUs from the local NUMA node and subtracting the CPUs used for kernel receive queues and the general interrupt. Special use cases: * If there are no CPUs left for completion vectors, the same CPU for the general interrupt is used; Therefore, there would only be one completion vector available. * For multi-HFI systems, the number of completion vectors available for each device is the total number of completion vectors in the local NUMA node divided by the number of devices in the same NUMA node. If there's a division remainder, the first device to get initialized gets an extra completion vector. Upon a CQ creation, an invalid completion vector could be specified. Handle it as follows: * If the completion vector is less than 0, set it to 0. * Set the completion vector to the result of the passed completion vector moded with the number of device completion vectors available. Reviewed-by:Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
-
