The following implements support for instantiation of 8MB D-TLB
entries for the kernel direct virtual mapping on 8xx, thus reducing TLB
space consumed for the kernel.

Test used: writing 40MB from /dev/zero to file in ext2fs over 
RAMDISK.

$ time dd if=/dev/zero of=file bs=4k count=10000 

VANILLA			8MB kernel data pages

real    0m11.485s	real    0m11.267s
user    0m0.218s        user    0m0.250s
sys     0m8.939s	sys     0m9.108s

real    0m11.518s	real    0m10.978s
user    0m0.203s 	user    0m0.222s
sys     0m9.585s	sys     0m9.138s

real    0m11.554s	real    0m10.967s
user    0m0.228s    	user    0m0.222s
sys     0m9.497s	sys     0m9.127s

real    0m11.633s	real	0m11.286s
user    0m0.214s	user    0m0.196s
sys     0m9.529s	sys     0m9.134s

and averages for both:

real	11.54750	real 11.12450

Which is a 3.6% improvement in execution time. More improvement is
expected for loads with larger kernel data footprint (real workloads).
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Add the first MPC83xx board that uses a flat device tree to arch/powerpc.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Parse the flat device tree for devices on Freescale SOC's that we know
about (gianfar, gianfar_mdio, i2c, mpc83xx_wdt).  We need to setup
platform devices and platform data for these devices to match arch/ppc
usage.

Also add a helper function (get_immrbase) that reports the base
address of the MMIO registers on the SOC.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

On a number of embedded reference boards there isn't always a
way to reset, power_off, or halt the board.  Rather than having
each board implement a spin loop just let the generic code do
it.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

In 2.6.15-git6 a change was commited in the oprofile support in
the powerpc architecture.  It introduced the powerpc_oprofile_type
which contains the define G4.  This causes a name clash with the
existing wacom usb tablet driver.

      CC [M]  drivers/usb/input/wacom.o
    drivers/usb/input/wacom.c:98: error: conflicting types for `G4'
    include/asm/cputable.h:37: error: previous declaration of `G4'
      CC [M]  drivers/usb/mon/mon_text.o
    make[3]: *** [drivers/usb/input/wacom.o] Error 1
    make[2]: *** [drivers/usb/input] Error 2

The elements of an enum declared in global scope are effectivly
global identifiers themselves.  As such we need to ensure the names
are unique.  This patch updates the later oprofile support to use
unique names.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The glibc folks want to use AT_PLATFORM to select between possible
alternative versions of shared libraries.  This commit makes the kernel
supply an AT_PLATFORM string that indicates what class of processor
we are running on.  Processors with the same set of user-level
instructions and roughly the same instruction scheduling characteristics
are given the same AT_PLATFORM value; for example, 821, 823 and 860
are all reported as "ppc823", and 7447, 7447A, 7448, 7450, 7451, 7455
are all called "ppc7450".

The intention is that the AT_PLATFORM values match the values that
gcc accepts for the -mcpu= option.  For values which are numeric
(e.g. -mcpu=750), "ppc" has been prepended.

This also adds a PPC_FEATURE_BOOKE bit to the AT_HWCAP value and sets
it for the 440 family and the Freescale 85xx family.
Signed-off-by: Paul Mackerras <paulus@samba.org>

On PowerPC, we want to be able to provide an AT_PLATFORM aux table
entry to userspace, so that glibc can choose optimized libraries for
the processor we're running on.  Unfortunately that would be the 21st
aux table entry on powerpc, meaning that the aux table including the
terminating null entry would overflow the mm->saved_auxv[] array,
leading to userland programs segfaulting.

This increases the size of the mm->saved_auxv array to be large enough
to accommodate an AT_PLATFORM entry on powerpc.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

There's a lack of parenthesis in fs/ufs/utils.h, so instead of the 512th
byte of buffer, the usb2 pointer will point to the nth structure of type
ufs_super_block_second.

This can cause a mount-time oops if you're unlucky (especially with
DEBUG_PAGEALLOC, which is how Alexey Dobriyan saw this problem)
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It makes my eyes hurt.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

eieio is only a store - store ordering. When used to order an unlock
operation loads may leak out of the critical region. This is potentially
buggy, one example is if a user wants to atomically read a couple of
values.

We can solve this with an lwsync which orders everything except store - load.

I removed the (now unused) EIEIO_ON_SMP macros and the c versions
isync_on_smp and eieio_on_smp now we dont use them. I also removed some
old comments that were used to identify inline spinlocks in assembly,
they dont make sense now our locks are out of line.

Another interesting thing was that read_unlock was using an eieio even
though the rest of the spinlock code had already been converted to
use lwsync.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

At present the lppaca - the structure shared with the iSeries
hypervisor and phyp - is contained within the PACA, our own low-level
per-cpu structure.  This doesn't have to be so, the patch below
removes it, making a separate array of lppaca structures.

This saves approximately 500*NR_CPUS bytes of image size and kernel
memory, because we don't need aligning gap between the Linux and
hypervisor portions of every PACA.  On the other hand it means an
extra level of dereference in many accesses to the lppaca.

The patch also gets rid of several places where we assign the paca
address to a local variable for no particular reason.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch consolidates the variety of macros used for loading 32 or
64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*).  The
idea is to make the set of macros consistent across 32 and 64 bit and
to make it more obvious which is the appropriate one to use in a given
situation.  The new macros and their semantics are described in the
comments in ppc_asm.h.

In the process, we change several places that were unnecessarily using
immediate loads on ppc64 to use the GOT/TOC.  Likewise we cleanup a
couple of places where we were clumsily subtracting PAGE_OFFSET with
asm instructions to use assemble-time arithmetic or the toreal() macro
instead.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The gianfar driver changed how it required MDIO bus and phy id's
to be passed to it.  Also, it no longer passes the physical address
of the MDIO bus.  Instead we have a proper platform device.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The following reworks how defaultimage- is used.  We default to zImage
here and then override it on platforms that need something more (uImage
in the future) or less (vmlinux on iSeries).
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Add support to reconfigure the device tree through the existing
proc filesystem interface.  Add "add_property", "remove_property",
and "update_property" commands to the existing interface.
Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Add an of_find_property function that returns a struct property
given a property name.  Then change the get_property function to
use that routine internally.
Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Add support for updating and removing device tree
properties.  Since we hand out pointers to properties with gay
abandon, we can't just free the property storage.  Instead we
move deleted, or the old copy of an updated property, to a
"dead properties" list.

Also note, its not feasable to kref device tree properties.
we call get_property() all over the kernel in a wild variety
of contexts.

One consequence of this change is that we now take a
read_lock(&devtree_lock) when doing get_property().
Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Add support to the proc_device_tree file for removing
and updating properties.  Remove just removes the
proc file, update changes the data pointer within
the proc file.  The remainder of the device-tree
changes occur elsewhere.
Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Adds a few more hypervisor call constants.
Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Since the documentation no longer tells people to 'make bzImage', and
with the previous patch nothing more than 'make' is required to get the
right bootable images (just like on i386 now), this removes the bzImage
-> zImage target redirect on ARCH=powerpc
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

At least some versions of the via-velocity hardware only support
checksumming IPv4 frames in hardware.  However, the driver is currently
setting the NETIF_F_HW_CSUM flag, which indicates support for more than
just IPv4.  This results in errors when trying to use IPv6 over
via-velocity hardware.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

The comments in ieee80211.h claim that one doesn't need to set the len
parameter of the stats struct. But if one doesn't, the management frames
are read far over the memory they actually occupy causing badness.
Signed-Off-By: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

	I believe I see the race Michael refers to (tlb_choose_channel
may set head, which tlb_init_slave clears), although I was not able to
reproduce it.  I have updated his patch for the current netdev-2.6.git
tree and added a version update.  His original comment follows:

Our systems have been crashing during testing of PCI HotPlug
support in the various networking components.  We've faulted in
the bonding driver due to a bug in bond_alb.c:tlb_clear_slave()

In that routine, the last modification to the TLB hash table is
made without protection of the lock, allowing a race that can lead
tlb_choose_channel() to select an invalid table element.

	-J
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

This patch allows the Atmel driver to work correctly with wpa_supplicant
and other programs that require some conformance with WEXT-18.  It
should not affect current behavior of the driver.  The patch does four
things:

1) Implements SIOCSIWENCODEEXT, SIOCGIWENCODEEXT, SIOCSIWAUTH, and
SIOCGIWAUTH calls for unencrypted and WEP operation

2) Accepts zero-filled addresses for SIOCSIWAP, which are legal and
should turn off any previous forced WAP address

3) Sends association and de-association events to userspace at most of
the appropriate times

4) Fixes erroneous order of CIPHER_SUITE_WEP_* arguments in one location
which are actually unused anyway
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Replace the MODULE_PARM usage in uli526x.c with module_param.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Make the driver produce the string used by phy_connect and have board specific
code pass the integer mii bus id and phy device id for the specific controller
instance.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Add the PHY_ID_FMT macro to ensure that the format of the id string used by a
driver to match to its specific phy is consistent between the mdio_bus and the
driver.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

We can now have the gianfar mii platform device have a proper resource for the
IO memory region for its registers.  Previously we passed this information
that the platform_data structure because we couldn't handle overlapping memory
regions for platform devices.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Missing include of <linux/in.h> to get definition of IPPROTO_UDP.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

airo.c currently has MICSUPPORT enabled, which requires CONFIG_CRYPTO.  A
user reported a build failure which is due to the lack of a Kconfig
dependency.  See http://bugs.debian.org/344205.

This patch makes Kconfig enforce this dependency.
Signed-off-by: dann frazier <dannf@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

We have identified two related bugs in the e100 driver.

Both bugs are related to manipulation of the MDI control register.

The first problem is that the Ready bit is being ignored when writing to
the Control register; we noticed this because the Linux bonding driver
would occasionally come to the spurious conclusion that the link was down
when querying Link State.  It turned out that by failing to wait for a
previous command to complete it was selecting what was essentially a random
register in the MDI register set.  When we added code that waits for the
Ready bit (as shown in the patch file below) all such problems ceased.

The second problem is that, although access to the MDI registers involves
multiple steps which must not be intermixed, nothing was defending against
two or more threads attempting simultaneous access.  The most obvious
situation where such interference could occur involves the watchdog versus
ioctl paths, but there are probably others, so we recommend the locking
shown in our patch file.
Signed-off-by: Michael O'Donnell <Michael.ODonnell@stratus.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: John Ronciak <john.ronciak@intel.com>
Cc: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

There's a problem with the REQ_BLOCK_PC handling as well (bad ->data_len
handling) where it could actually complete a request ahead of time.  I
suggest we just back this out for now, I will resubmit it later when I'm
fully confident in it.

This reverts commit 8672d571Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Turn several drivers/serial/ semaphores-used-as-mutex into mutexes
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>