- 12 Nov, 2008 7 commits
-
-
Eric Dumazet authored
This patch introduces two helpers that deal with reading and writing struct net pointers in various network structures. Their implementation depends on CONFIG_NET_NS For symmetry, both functions work with "struct net **pnet". Their usage should reduce the number of #ifdef CONFIG_NET_NS, without adding many helpers for each network structure that hold a "struct net *pointer" Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gerrit Renker authored
This provides a missing link in the code chain, as several features implicitly depend and/or rely on the choice of CCID. Most notably, this is the Send Ack Vector feature, but also Ack Ratio and Send Loss Event Rate (also taken care of). For Send Ack Vector, the situation is as follows: * since CCID2 mandates the use of Ack Vectors, there is no point in allowing endpoints which use CCID2 to disable Ack Vector features such a connection; * a peer with a TX CCID of CCID2 will always expect Ack Vectors, and a peer with a RX CCID of CCID2 must always send Ack Vectors (RFC 4341, sec. 4); * for all other CCIDs, the use of (Send) Ack Vector is optional and thus negotiable. However, this implies that the code negotiating the use of Ack Vectors also supports it (i.e. is able to supply and to either parse or ignore received Ack Vectors). Since this is not the case (CCID-3 has no Ack Vector support), the use of Ack Vectors is here disabled, with a comment in the source code. An analogous consideration arises for the Send Loss Event Rate feature, since the CCID-3 implementation does not support the loss interval options of RFC 4342. To make such use explicit, corresponding feature-negotiation options are inserted which signal the use of the loss event rate option, as it is used by the CCID3 code. Lastly, the values of the Ack Ratio feature are matched to the choice of CCID. The patch implements this as a function which is called after the user has made all other registrations for changing default values of features. The table is variable-length, the reserved (and hence for feature-negotiation invalid, confirmed by considering section 19.4 of RFC 4340) feature number `0' is used to mark the end of the table. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gerrit Renker authored
This provides a data structure to record which CCIDs are locally supported and three accessor functions: - a test function for internal use which is used to validate CCID requests made by the user; - a copy function so that the list can be used for feature-negotiation; - documented getsockopt() support so that the user can query capabilities. The data structure is a table which is filled in at compile-time with the list of available CCIDs (which in turn depends on the Kconfig choices). Using the copy function for cloning the list of supported CCIDs is useful for feature negotiation, since the negotiation is now with the full list of available CCIDs (e.g. {2, 3}) instead of the default value {2}. This means negotiation will not fail if the peer requests to use CCID3 instead of CCID2. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gerrit Renker authored
Two registration routines, for SP and NN features, are provided by this patch, replacing a previous routine which was used for both feature types. These are internal-only routines and therefore start with `__feat_register'. It further exports the known limits of Sequence Window and Ack Ratio as symbolic constants. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gerrit Renker authored
This patch limits feature (capability) negotation to the connection setup phase: 1. Although it is theoretically possible to perform feature negotiation at any time (and RFC 4340 supports this), in practice this is prohibitively complex, as it requires to put traffic on hold for each new negotiation. 2. As a byproduct of restricting feature negotiation to connection setup, the feature-negotiation retransmit timer is no longer required. This part is now mapped onto the protocol-level retransmission. Details indicating why timers are no longer needed can be found on http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/feature_negotiation/\ implementation_notes.html This patch disables anytime negotiation, subsequent patches work out full feature negotiation support for connection setup. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Unused after kmem_cache_zalloc() conversion. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
->pde isn't actually needed, since name is stashed in ->id. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Nov, 2008 33 commits
-
-
David S. Miller authored
Conflicts: drivers/message/fusion/mptlan.c drivers/net/sfc/ethtool.c net/mac80211/debugfs_sta.c
-
Linus Torvalds authored
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timers: handle HRTIMER_CB_IRQSAFE_UNLOCKED correctly from softirq context nohz: disable tick_nohz_kick_tick() for now irq: call __irq_enter() before calling the tick_idle_check x86: HPET: enter hpet_interrupt_handler with interrupts disabled x86: HPET: read from HPET_Tn_CMP() not HPET_T0_CMP x86: HPET: convert WARN_ON to WARN_ON_ONCE
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: release buddies on yield fix for account_group_exec_runtime(), make sure ->signal can't be freed under rq->lock sched: clean up debug info
-
Linus Torvalds authored
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ring-buffer: prevent infinite looping on time stamping ftrace: disable tracing on resize ftrace: fix breakage in bin_fmt results ftrace: ftrace.txt version update ftrace: update txt document
-
Sujith authored
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: [XFS] XFS: Check for valid transaction headers in recovery [XFS] handle memory allocation failures during log initialisation [XFS] Account for allocated blocks when expanding directories [XFS] Wait for all I/O on truncate to zero file size [XFS] Fix use-after-free with log and quotas
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (21 commits) ocfs2: Check search result in ocfs2_xattr_block_get() ocfs2: fix printk related build warnings in xattr.c ocfs2: truncate outstanding block after direct io failure ocfs2/xattr: Proper hash collision handle in bucket division ocfs2: return 0 in page_mkwrite to let VFS retry. ocfs2: Set journal descriptor to NULL after journal shutdown ocfs2: Fix check of return value of ocfs2_start_trans() in xattr.c. ocfs2: Let inode be really deleted when ocfs2_mknod_locked() fails ocfs2: Fix checking of return value of new_inode() ocfs2: Fix check of return value of ocfs2_start_trans() ocfs2: Fix some typos in xattr annotations. ocfs2: Remove unused ocfs2_restore_xattr_block(). ocfs2: Don't repeat ocfs2_xattr_block_find() ocfs2: Specify appropriate journal access for new xattr buckets. ocfs2: Check errors from ocfs2_xattr_update_xattr_search() ocfs2: Don't return -EFAULT from a corrupt xattr entry. ocfs2: Check xattr block signatures properly. ocfs2: add handler_map array bounds checking ocfs2: remove duplicate definition in xattr ocfs2: fix function declaration and definition in xattr ...
-
Alan Cox authored
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alan Cox authored
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (35 commits) V4L/DVB (9516): cx18: Move DVB buffer transfer handling from irq handler to work_queue V4L/DVB (9557): gspca: Small changes for the sensor HV7131B in zc3xx. V4L/DVB (9556): gspca: Bad init sequence for sensor HV7131B in zc3xx. V4L/DVB (9549): gspca: Fix a typo in one of gspca chips name. V4L/DVB (9515): cx18: Use correct Mailbox IRQ Ack values and misc IRQ handling cleanup V4L/DVB (9493): kconfig patch V4L/DVB (9527): af9015: fix compile warnings V4L/DVB (9524): af9013: fix bug in status reading V4L/DVB (9511): cx18: Mark CX18_CPU_DE_RELEASE_MDL as a slow API call V4L/DVB (9510): cx18: Fix write retries for registers that always change - part 2. V4L/DVB (9506): ivtv/cx18: fix test whether modules should be loaded or not. V4L/DVB (9499): cx88-mpeg: final fix for analogue only compilation + de-alloc fix V4L/DVB (9496): cx88-blackbird: bugfix: cx88-blackbird-mpeg-users V4L/DVB (9495): cx88-blackbird: bugfix: cx88-blackbird-poll-fix V4L/DVB (9494): anysee: initialize anysee_usb_mutex statically V4L/DVB (9492): unplug oops from dvb_frontend_init... V4L/DVB (9486): ivtv/ivtvfb: no longer experimental V4L/DVB (9485): ivtv: remove incorrect V4L1 & tvaudio dependency V4L/DVB (9482): Documentation, especially regarding audio and informational links V4L/DVB (9475): cx18: Disable write retries for registers that always change - part 1. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Update desktop/server defconfigs powerpc: Fix msr check in compat_sys_swapcontext powerpc: Repair device bindings documentation powerpc: Updated Freescale PPC related defconfigs powerpc: Update QE/CPM2 usb_ctlr structures for USB support powerpc/86xx: Correct SOC bus-frequency in GE Fanuc SBC610 DTS powerpc: Fix Book-E watchdog timer interval setting powerpc/fsl-booke: Fix synchronization bug w/local tlb invalidates
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: Move legacy breadcrumb out of the reserved status page area drm/i915: Filter pci devices based on PCI_CLASS_DISPLAY_VGA drm/radeon: map registers at load time drm: Remove infrastructure for supporting i915's vblank swapping. i915: Remove racy delayed vblank swap ioctl. i915: Don't whine when pci_enable_msi() fails. i915: Don't attempt to short-circuit object_wait_rendering by checking domains. i915: Clean up sarea pointers on leavevt i915: Save/restore MCHBAR_RENDER_STANDBY on GM965/GM45
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: fix last_reset timestamp handling libata: Avoid overflow in ata_tf_read_block() when tf->hba_lbal > 127 [libata] pata_pcmcia: another memory card support [libata] pata_sch: notice attached slave devices [libata] pata_cs553*.c: cleanup kernel-doc
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Update defconfig. Revert "sparc: correct section of current_pc()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: dsa: fix master interface allmulti/promisc handling dsa: fix skb->pkt_type when mac address of slave interface differs net: fix setting of skb->tail in skb_recycle_check() net: fix /proc/net/snmp as memory corruptor mac80211: fix a buffer overrun in station debug code netfilter: payload_len is be16, add size of struct rather than size of pointer ipv6: fix ip6_mr_init error path [4/4] dca: fixup initialization dependency [3/4] I/OAT: fix async_tx.callback checking [2/4] I/OAT: fix dma_pin_iovec_pages() error handling [1/4] I/OAT: fix channel resources free for not allocated channels ssb: Fix DMA-API compilation for non-PCI systems SSB: hide empty sub menu vlan: Fix typos in proc output string [netdrvr] usb/hso: Cleanup rfkill error handling sfc: Correct address of gPXE boot configuration in EEPROM el3_common_init() should be __devinit, not __init hso: rfkill type should be WWAN mlx4_en: Start port error flow bug fix af_key: mark policy as dead before destroying
-
Peter Zijlstra authored
Clear buddies on yield, so that the buddy rules don't schedule them despite them being placed right-most. This fixed a performance regression with yield-happy binary JVMs. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Lin Ming <ming.m.lin@intel.com>
-
Andy Walls authored
cx18: Move DVB buffer transfer handling from irq handler to work_queue thread. In order to properly lock the epu2cpu mailbox for driver to CX23418 commands, the DVB/TS buffer handling needs to be moved from the IRQ handler and IRQ context to a work queue. This work_queue implmentation is strikingly similar to the ivtv implementation - for better or worse. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
- touch only one register for brightness change - no quality control - don't probe again at streamon time. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
This patch fixes the H flip and the R & B color inversion of mode 320x240. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Krzysztof Helt authored
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andy Walls authored
cx18: Use correct Mailbox IRQ Ack values and misc IRQ handling cleanup. The SCB field definitions for Ack IRQ's for mailboxes were inconsistent with the bitmasks being loaded into those SCB fields and the SW2 Ack IRQ handling logic. Renamed fields in SCB to make things consistent and did misc IRQ handling cleanups: removing legacy ivtv dma_reg_lock, HPU IRQ flags, etc. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Frederic CAND authored
Ok I made a patch that converts gspca kconfig file to a more standard= one, with tabs + 2 white spaces, so that if a warning is added it still compiles please find it attached Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Antti Palosaari authored
- use static to avoid compile warnings Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
roel kluin authored
- ! has a higher precedence than & Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andy Walls authored
cx18: Mark CX18_CPU_DE_RELEASE_MDL as a slow API call. Give the encoder time to complete the MDL release before destroying the encoder internal task. This avoids an encoder lockup on the next digital capture and error messages about buffers being returned for an inactive encoder task handle. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andy Walls authored
cx18: Fix write retries for registers that always change - part 2. Some registers, especially interrupt related ones, will never read back the value just written. Modified interrupt register readback checks to make sure the intended effect was achieved. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Darron Broad authored
Final fix for when analogue only is selected for compilation (ie, !CX88_DVB) This tidies up previous fix and adds missing de-alloc memory leak on fault (eg, if fe1 fails to alloc where fe0 was allocated). Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Frederic CAND authored
Allows multiple access to the mpeg device Signed-off-by: Frederic CAND <frederic.cand@anevia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Frederic CAND authored
Starts encoder not only on a read call but also on a poll command. Signed-off-by: Frederic CAND <frederic.cand@anevia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Akinobu Mita authored
anysee_usb_mutex is initialized at every time the anysee device is probed. If the second anysee device is probed while anysee_usb_mutex is locked by the first anysee device, the mutex is broken. This patch fixes by initialize anysee_usb_mutex statically rather than initialize at probe time. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Daniel J Blueman authored
When inadvertently hot-unplugging a WT-220U USB DVB-T receiver with 2.6.24, I was met with an oops [1]. The problem is relevant to 2.6.25/26-rc also. dvb_frontend_init() was called either from re-creation of the kdvb-fe0 thread - seems unlikely, or someone called dvb_frontend_reinitialise(), causing this path in the thread - really unlikely, as I can't find any call-site for it. Either way, quite a number of drivers call dvb_usb_generic_rw() [2] without checking the validity of the relevant member in the dvb_usb_device struct - which had changed. Having dvb_usb_generic_rw() sanity-check and fail (rather than loading from 0x120) seems reasonable defensive programming [3], in light of it being called in this way. The problem with this, is that drivers don't check the return code of the init call [4]. Does it make sense to cook a patch which allows the failure to be propagated back up, or am I missing something else? Thanks, Daniel <whoops, hot unplug> [83711.538485] dvb-usb: bulk message failed: -71 (1/0) [83711.538875] dvb-usb: bulk message failed: -71 (1/0) [83711.538899] usb 7-5: USB disconnect, address 3 [83711.538905] dvb-usb: bulk message failed: -22 (1/0) [83711.538924] dvb-usb: bulk message failed: -22 (1/0) [83711.538943] dvb-usb: bulk message failed: -22 (1/0) [83711.588979] dvb-usb: bulk message failed: -22 (1/0) [83711.589031] dvb-usb: bulk message failed: -22 (1/0) [83711.589078] dvb-usb: bulk message failed: -22 (1/0) [83711.589122] dvb-usb: bulk message failed: -22 (1/0) [83711.589167] dvb-usb: bulk message failed: -22 (1/0) [83711.639233] dvb-usb: bulk message failed: -22 (1/0) [83711.639282] dvb-usb: bulk message failed: -22 (1/0) [83711.639330] dvb-usb: bulk message failed: -22 (1/0) [83711.639374] dvb-usb: bulk message failed: -22 (1/0) [83711.639421] dvb-usb: bulk message failed: -22 (1/0) [83711.658391] dvb-usb: bulk message failed: -22 (1/0) [83768.174281] dvb-usb: bulk message failed: -22 (2/-32512) [83768.174350] Unable to handle kernel NULL pointer dereference<6>dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully deinitialized and disconnected. [83768.174459] at 0000000000000120 RIP: [83768.174459] [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.174580] PGD 0 [83768.174643] Oops: 0000 [1] SMP [83768.174723] CPU 0 [83768.174782] Modules linked in: nfsd auth_rpcgss exportfs nfs lockd nfs_acl sunrpc af_packet xt_length ipt_tos ipt_TOS xt_CLASSIFY sch_sfq sch_htb ipt_MASQUERADE ipt_REDIRECT xt_limit xt_state xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_mangle iptable_filter ip_tables x_tables xfs sbp2 parport_pc lp parport loop ftdi_sio usbserial evdev dvb_usb_dtt200u dvb_usb dvb_core i2c_core sky2 iTCO_wdt iTCO_vendor_support snd_hda_intel shpchp snd_pcm snd_timer snd_page_alloc snd_hwdep snd pci_hotplug soundcore ipv6 button intel_agp ext3 jbd mbcache sg sd_mod ata_generic pata_acpi ahci ata_piix libata scsi_mod ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore e1000 thermal processor fan fbcon tileblit font bitblit softcursor fuse [83768.176968] Pid: 5732, comm: kdvb-fe-0 Not tainted 2.6.24-16-server #1 [83768.177009] RIP: 0010:[<ffffffff88339b4f>] [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.177096] RSP: 0018:ffff810021939df0 EFLAGS: 00010286 [83768.177138] RAX: ffff81003bc7cc00 RBX: 0000000000000001 RCX: 0000000000000000 [83768.177181] RDX: 0000000000000001 RSI: ffff810021939e67 RDI: 0000000000000000 [83768.177223] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [83768.177267] R10: ffff810001009880 R11: 0000000000000001 R12: ffff81003c10b400 [83768.177311] R13: ffff81003c10b5b0 R14: ffff810021939ec0 R15: 0000000000000000 [83768.177354] FS: 0000000000000000(0000) GS:ffffffff805c3000(0000) knlGS:0000000000000000 [83768.177409] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [83768.177449] CR2: 0000000000000120 CR3: 0000000000201000 CR4: 00000000000006e0 [83768.177491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [83768.177534] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [83768.177576] Process kdvb-fe-0 (pid: 5732, threadinfo ffff810021938000, task ffff81003bd1b7a0) [83768.177629] Stack: ffff81003e9b6828 0000000000000000 ffff8100378369f8 0000000000000000 [83768.177800] ffff81003bd1b7a0 ffff810037836d48 ffff81003bc7cc30 ffff81003c10b400 [83768.177943] ffff81003c10b5b0 ffff810021939ec0 ffff81003c10b5e0 ffffffff88342452 [83768.178054] Call Trace: [83768.178130] [<ffffffff88342452>] :dvb_usb_dtt200u:dtt200u_fe_init+0x22/0x30 [83768.178178] [<ffffffff88339f6a>] :dvb_usb:dvb_usb_fe_wakeup+0x3a/0x50 [83768.178229] [<ffffffff88325c41>] :dvb_core:dvb_frontend_init+0x21/0x70 [83768.178278] [<ffffffff8832746b>] :dvb_core:dvb_frontend_thread+0x8b/0x370 [83768.178329] [<ffffffff883273e0>] :dvb_core:dvb_frontend_thread+0x0/0x370 [83768.178382] [<ffffffff80253e3b>] kthread+0x4b/0x80 [83768.178427] [<ffffffff8020d198>] child_rip+0xa/0x12 [83768.178473] [<ffffffff80253df0>] kthread+0x0/0x80 [83768.178514] [<ffffffff8020d18e>] child_rip+0x0/0x12 [83768.178557] [83768.178594] [83768.178594] Code: 44 8b 87 20 01 00 00 49 89 f4 45 89 ce 45 85 c0 0f 84 ad 00 [83768.179167] RIP [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.179234] RSP <ffff810021939df0> [83768.179271] CR2: 0000000000000120 [83768.179419] ---[ end trace dba8483163cb1700 ]--- Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-