- 01 Oct, 2019 40 commits
-
-
Sakari Ailus authored
Instead of individually depending on MEDIA_CAMERA_SUPPORT (or forgetting it), put all camera sensor, lens and flash drivers under MEDIA_CAMERA_SUPPORT as a whole. The lens VCM devices didn't use to do this, but make them depend on MEDIA_CAMERA_SUPPORT as well since there's no use for these devices without that in practice. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Janusz Krzysztofik authored
The driver stores crop rectangle settings supposed to be in line with hardware state in a device private structure. Since the driver initial submission, crop rectangle width and height settings are not updated correctly when rectangle offset settings are applied on hardware. If an error occurs while the device is updated, the stored settings my no longer reflect hardware state and consecutive calls to .get_selection() as well as .get/set_fmt() may return incorrect information. That in turn may affect ability of a bridge device to use correct DMA transfer settings if such incorrect informamtion on active frame format returned by .get/set_fmt() is used. Assuming a failed update of the device means its actual settings haven't changed, update crop rectangle width and height settings stored in the device private structure correctly while the rectangle offset is successfully applied on hardware so the stored values always reflect actual hardware state to the extent possible. Fixes: 2f6e2404 ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
-
Janusz Krzysztofik authored
The driver stores frame format settings supposed to be in line with hardware state in a device private structure. Since the driver initial submission, those settings are updated before they are actually applied on hardware. If an error occurs on device update, the stored settings my not reflect hardware state anymore and consecutive calls to .get_fmt() may return incorrect information. That in turn may affect ability of a bridge device to use correct DMA transfer settings if such incorrect informmation on active frame format returned by .get_fmt() is used. Assuming a failed device update means its state hasn't changed, update frame format related settings stored in the device private structure only after they are successfully applied so the stored values always reflect hardware state as closely as possible. Fixes: 2f6e2404 ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by:
-
Janusz Krzysztofik authored
It is not clear what pixel format is actually configured in hardware on reset. MEDIA_BUS_FMT_YUYV8_2X8, assumed on device probe since the driver was intiially submitted, is for sure not the one. Fix it by explicitly applying a known, driver default frame format just after initial device reset. Fixes: 2f6e2404 ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by:
-
Janusz Krzysztofik authored
Commit da298c6d ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt") converted a former ov6650_g_fmt() video operation callback to an ov6650_get_fmt() pad operation callback. However, the converted function disregards a format->which flag that pad operations should obey and always returns active frame format settings. That can be fixed by always responding to V4L2_SUBDEV_FORMAT_TRY with -EINVAL, or providing the response from a pad config argument, likely updated by a former user call to V4L2_SUBDEV_FORMAT_TRY .set_fmt(). Since implementation of the latter is trivial, go for it. Fixes: da298c6d ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt") Signed-off-by:
-
Janusz Krzysztofik authored
User arguments passed to .get/set_fmt() pad operation callbacks may contain unsupported values. The driver takes control over frame size and pixel code as well as colorspace and field attributes but has never cared for remainig format attributes, i.e., ycbcr_enc, quantization and xfer_func, introduced by commit 11ff030c ("[media] v4l2-mediabus: improve colorspace support"). Fix it. Set up a static v4l2_mbus_framefmt structure with attributes initialized to reasonable defaults and use it for updating content of user provided arguments. In case of V4L2_SUBDEV_FORMAT_ACTIVE, postpone frame size update, now performed from inside ov6650_s_fmt() helper, util the user argument is first updated in ov6650_set_fmt() with default frame format content. For V4L2_SUBDEV_FORMAT_TRY, don't copy all attributes to pad config, only those handled by the driver, then fill the response with the default frame format updated with resulting pad config format code and frame size. Fixes: 11ff030c ("[media] v4l2-mediabus: improve colorspace support") Signed-off-by:
-
Janusz Krzysztofik authored
Since its initial submission, the driver selects V4L2_COLORSPACE_JPEG for supported formats other than V4L2_MBUS_FMT_SBGGR8_1X8. According to v4l2-compliance test program, V4L2_COLORSPACE_JPEG applies exclusively to V4L2_PIX_FMT_JPEG. Since the sensor does not support JPEG format, fix it to always select V4L2_COLORSPACE_SRGB. Fixes: 2f6e2404 ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by:
-
Janusz Krzysztofik authored
Commit 4f996594 ("[media] v4l2: make vidioc_s_crop const") introduced a writable copy of constified user requested crop rectangle in order to be able to perform hardware alignments on it. Later on, commit 10d5509c ("[media] v4l2: remove g/s_crop from video ops") replaced s_crop() video operation using that const argument with set_selection() pad operation which had a corresponding argument not constified, however the original behavior of the driver was not restored. Since that time, any hardware alignment applied on a user requested crop rectangle is not passed back to the user calling .set_selection() as it should be. Fix the issue by dropping the copy and replacing all references to it with references to the crop rectangle embedded in the user argument. Fixes: 10d5509c ("[media] v4l2: remove g/s_crop from video ops") Signed-off-by:
-
Janusz Krzysztofik authored
Since commit afd9690c ("[media] ov6650: convert to the control framework"), if an error occurs during initialization of a control handler, resources possibly allocated to the handler are not freed before device initialiaton is aborted. Fix it. Fixes: afd9690c ("[media] ov6650: convert to the control framework") Signed-off-by:
-
Janusz Krzysztofik authored
Commit 23a52386 ("media: ov6650: convert to standalone v4l2 subdevice") converted the driver from a soc_camera sensor to a standalone V4L subdevice driver. Unfortunately, module description was not updated to reflect the change. Fix it. While being at it, update email address of the module author. Fixes: 23a52386 ("media: ov6650: convert to standalone v4l2 subdevice") Signed-off-by:
-
YueHaibing authored
If CONFIG_REGMAP_I2C is not set, building fails: drivers/media/i2c/max2175.o: In function `max2175_probe': max2175.c:(.text+0x1404): undefined reference to `__devm_regmap_init_i2c' Select REGMAP_I2C to fix this. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: b47b79d8 ("[media] media: i2c: max2175: Add MAX2175 support") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Hans Verkuil authored
This patch converts the cx231xx driver to the vb2 framework. Since you can't do a partial conversion this is a big-bang patch, i.e. large and hard to review. I never found a way around this. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Co-developed-by:
-
Hans Verkuil authored
Add support for cec-notifier to the cec-gpio driver. This makes it possible to associate the CEC gpio pin with an HDMI connector. This feature was always documented in the cec-gpio bindings: Documentation/devicetree/bindings/media/cec-gpio.txt But support for the hdmi-phandle property was never actually implemented in this driver. This patch adds support for this property. It also fixes a few incorrect error returns in the probe() function, which skipped the call to cec_delete_adapter(). Tested on a Raspberry Pi 3B with a modified vc4 driver. Signed-off-by:
-
Dariusz Marcinkiewicz authored
Document the new CEC_ADAP_G_CONNECTOR_INFO ioctl and the new CEC_CAP_CONNECTOR_INFO capability. Co-developed-by:
Dariusz Marcinkiewicz <darekm@google.com> Signed-off-by:
-
Dariusz Marcinkiewicz authored
Until now the connector info API was a kernel-internal API only. This moves it to the public API and adds the new ioctl to retrieve this information. Signed-off-by:
-
Hans Verkuil authored
CEC_OP_REC_FLAG_NOT_USED is 0 and CEC_OP_REC_FLAG_USED is 1, not the other way around. Signed-off-by:
Jiunn Chang <c0d1n61at3@gmail.com> Cc: <stable@vger.kernel.org> # for v4.10 and up Signed-off-by:
-
Hans Verkuil authored
Instead of hardcoding the UI Command key values, use the new defines. Signed-off-by:
-
Hans Verkuil authored
These defines were never added to this CEC header, likely due to laziness on the part of the original author, i.e. me. But it is useful to have them, so add them. Also update the cec.h.rst.exceptions file to avoid errors when building the documentation. Signed-off-by:
-
Philipp Zabel authored
Now that proper V4L2 pixel formats exist for all 32-bit RGB permutations, drop support for the poorly defined legacy format V4L2_PIX_FMT_BGR32. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Since the uapi does not contain the num_ref_idx_active_override_flag, drivers for decoders that do not parse slices themselves don't know how to choose between the num_ref_idx_l[01]_default_active and the num_ref_idx_l[01]_active override fields. Instead, userspace must set the override fields to the default values if the slice does not have the num_ref_idx_active_override flag set. The drivers will then always enable the override internally and ignore the default fields completely. Clarify this requirement in the API documentation. Signed-off-by:
-
Philipp Zabel authored
Document that the slice headers must be included for the benefit of decoders that parse them (partially) in hardware, and that the start code is optional. Add a link to the ITU-T Rec. H.264 specification section that describes the slice format. Signed-off-by:
-
Boris Brezillon authored
Step '8.2.4.1 Decoding process for picture numbers' was missing in the reflist creation logic, leading to invalid P reflists when a ->frame_num wraparound happens. Fixes: a9471e25 ("media: hantro: Add core bits to support H264 decoding") Reported-by:
Francois Buergisser <fbuergisser@google.com> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Francois Buergisser <fbuergisser@chromium.org> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Boris Brezillon authored
And use it for all native type comparisons, even if it's not strictly required. By doing that we make the code more consistent and prevent from potential incorrect results in case of overflow or when the the values being compared are both negative. Signed-off-by:
-
Boris Brezillon authored
So it matches the code and the spec. Signed-off-by:
-
Niklas Söderlund authored
The hardware is capable to passing V4L2_FIELD_ALTERNATE to user-space. Allow users to request this field format but still default to using the hardware interlacer if alternating is not explicitly requested. Before this change a sensor providing data using alternate would be always combined to an interlaced frame. After this change the user can request to receive frames as alternate if the sensor provides it. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
The crop and compose rectangles are reset when s_fmt is called resulting in potentially valid rectangles being lost when updating the format. Fix this by mapping the rectangles inside the new format. Signed-off-by:
-
Niklas Söderlund authored
The variable to hold the video source information dimensions was poorly named 'source'. This is confusing as a lot of other members of structs share the same name with different purposes, rename it src_rect in preparation of refactoring code. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
The V4L2_FIELD_IS_INTERLACED() can be used to make the code more readable, use it. Signed-off-by:
-
Niklas Söderlund authored
While refactoring code the return statement became corrupted, fix it by returning the correct return code. Reported-by:
-
Ezequiel Garcia authored
Modify hantro_get_ref() and hantro_h264_get_ref_buf() helpers to return the buffer DMA address, this makes the code simpler and at the same time will allow easier enablement of the post-processing feature. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by:
-
Ezequiel Garcia authored
It seems all codecs are using a 16x16 size macroblock, and so it's possible to have just one set of macroblock macros. Signed-off-by:
-
Hans Verkuil authored
"struct struct" -> "struct" Signed-off-by:
-
Jernej Skrabec authored
Currently, if start streaming -> stop streaming -> start streaming sequence is executed, driver will end job prematurely, if ctx->translen is higher than 1, because "aborting" flag is still set from previous stop streaming command. Fix that by clearing "aborting" flag in start streaming handler. Fixes: 96d8eab5 ("V4L/DVB: [v5,2/2] v4l: Add a mem-to-mem videobuf framework test device") Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
-
Vandana BN authored
When vbi stream is started, followed by video streaming, the vid_cap_streaming and vid_out_streaming were not being set to true, which would cause the video stream to stop when vbi stream is stopped. This patch allows to set vid_cap_streaming and vid_out_streaming to true. According to Hans Verkuil it appears that these 'if (dev->kthread_vid_cap)' checks are a left-over from the original vivid development and should never have been there. Signed-off-by:
Vandana BN <bnvandana@gmail.com> Cc: <stable@vger.kernel.org> # for v3.18 and up Signed-off-by:
-
Hans Verkuil authored
It should be "%u.%02u" instead of "%u.%u". Signed-off-by:
Bard Winther <bwinther@cisco.com> Signed-off-by:
-
Kefeng Wang authored
If v4l2_m2m_init() fails, m2m_dev pointer will be set ERR_PTR(-ENOMEM), then kfree m2m_dev will trigger BUG_ON, see below, fix it by setting m2m_dev to NULL. vim2m vim2m.0: Failed to init mem2mem device ------------[ cut here ]------------ kernel BUG at mm/slub.c:3944! invalid opcode: 0000 [#1] SMP PTI CPU: 11 PID: 9061 Comm: insmod Tainted: G E 5.2.0-rc2 #81 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:kfree+0x11a/0x160 Call Trace: vim2m_device_release+0x3f/0x50 [vim2m] device_release+0x27/0x80 kobject_release+0x68/0x190 vim2m_probe+0x20f/0x280 [vim2m] platform_drv_probe+0x37/0x90 really_probe+0xef/0x3d0 driver_probe_device+0x110/0x120 device_driver_attach+0x4f/0x60 __driver_attach+0x9a/0x140 ? device_driver_attach+0x60/0x60 bus_for_each_dev+0x76/0xc0 ? klist_add_tail+0x57/0x70 bus_add_driver+0x141/0x210 driver_register+0x5b/0xe0 vim2m_init+0x29/0x1000 [vim2m] do_one_initcall+0x46/0x1f4 ? __slab_alloc+0x1c/0x30 ? kmem_cache_alloc_trace+0x167/0x1b0 do_init_module+0x5b/0x21f load_module+0x1add/0x1fb0 ? __do_sys_finit_module+0xe9/0x110 __do_sys_finit_module+0xe9/0x110 do_syscall_64+0x5b/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: ea6c7e34 ("media: vim2m: replace devm_kzalloc by kzalloc") Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Alexandre Courbot authored
Check for a potentially NULL pointer that was overlooked and use shorter accessors to the same data. While we are at it, sprinkle a few comments. Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Signed-off-by:
-
Alexandre Courbot authored
Each of the supported decoder formats used to set the same RPC interrupt handler by themselves, even though this could be done by the IF init function itself. Move it to the right place and stop making its symbol public. Signed-off-by:
-
Yunfei Dong authored
mtk_q_data::fmt is actually a pointer and must be dereferenced as such. This went under the radar because mtk_v4l2_debug() evaluates to nothing unless DEBUG is defined. [acourbot: split into its own commit] Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the arrays on the stack but instead make them static const. Makes the object code smaller by 767 bytes. Before: text data bss dec hex filename 41567 15088 192 56847 de0f em28xx/em28xx-dvb.o After: text data bss dec hex filename 39872 16016 192 56080 db10 em28xx/em28xx-dvb.o (gcc version 9.2.1, amd64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
