- 29 Oct, 2012 9 commits
-
-
Laurent Pinchart authored
The limits are input parameters and should not be modified by the smiapp_pll_calculate() function. Make them const. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Laurent Pinchart authored
OP and VT limits have identical fields, create a shared structure for both. Signed-off-by:
-
Sakari Ailus authored
Support sensors with parallel interface. Make smiapp_pll.flags also 8-bit so it fits nicely into two 32-bit words with the other 8-bit fields. Signed-off-by:
-
Sakari Ailus authored
The input values for PLL configuration are mostly static. So set them when the sensor is registered. Signed-off-by:
-
Sakari Ailus authored
The smiapp pll calculator assumed that the minimum pre-pll divisor was perfect. That may not always be the case, so let's try the others, too. Typically there are just a few alternatives. Signed-off-by:
-
Sakari Ailus authored
Unsigned. Signed-off-by:
-
Laurent Pinchart authored
Two warning messages are missing a trailing newline. Fix it. Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/tuners/xc4000.c: In function ‘check_firmware’: drivers/media/tuners/xc4000.c:1048:45: warning: ‘fw_minor’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/tuners/xc4000.c:1048:39: warning: ‘fw_major’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/tuners/xc4000.c:1062:39: warning: ‘hw_minor’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/media/tuners/xc4000.c:1062:33: warning: ‘hw_major’ may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: -
Mauro Carvalho Chehab authored
While it is very unlikely, if the number of parameters for QAMDemodulatorCommand is not 2 or 4, status become undefined: /home/hans/work/build/v4l-dvb-git/drivers/media/dvb-frontends/drxk_hard.c: In function ‘QAMDemodulatorCommand’: /home/hans/work/build/v4l-dvb-git/drivers/media/dvb-frontends/drxk_hard.c:5452:5: warning: ‘status’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by:
-
- 28 Oct, 2012 31 commits
-
-
Nicolas THERY authored
See following thread for rationale: http://www.spinics.net/lists/linux-media/msg52462.html Tested by compilation only. Signed-off-by:
Nicolas Thery <nicolas.thery@st.com> Signed-off-by:
-
Kirill Smelkov authored
Judging from what drivers do and from my experience temeperframe fraction is set in seconds - look e.g. here static int bttv_g_parm(struct file *file, void *f, struct v4l2_streamparm *parm) { struct bttv_fh *fh = f; struct bttv *btv = fh->btv; v4l2_video_std_frame_period(bttv_tvnorms[btv->tvnorm].v4l2_id, &parm->parm.capture.timeperframe); ... void v4l2_video_std_frame_period(int id, struct v4l2_fract *frameperiod) { if (id & V4L2_STD_525_60) { frameperiod->numerator = 1001; frameperiod->denominator = 30000; } else { frameperiod->numerator = 1; frameperiod->denominator = 25; } and also v4l2-ctl in userspace decodes this as seconds: if (doioctl(fd, VIDIOC_G_PARM, &parm, "VIDIOC_G_PARM") == 0) { const struct v4l2_fract &tf = parm.parm.capture.timeperframe; ... printf("\tFrames per second: %.3f (%d/%d)\n", (1.0 * tf.denominator) / tf.numerator, tf.denominator, tf.numerator); The typo was there from day 1 - added in 2002 in e028b61b ([PATCH] add v4l2 api)(*) (*) found in history tree git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.gitSigned-off-by:Kirill Smelkov <kirr@mns.spb.ru> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Kirill Smelkov authored
Usage of BUFFER_TIMEOUT has gone in 2008 in 78718e5d (V4L/DVB (7492): vivi: Simplify the vivi driver and avoid deadlocks), but the macro remains. Say goodbye to it. Signed-off-by:
-
Sakari Ailus authored
V4L2_BUF_FLAG_NO_CACHE_INVALIDATE and V4L2_BUF_FLAG_NO_CACHE_CLEAN were define incorrectly in the documentation. Fix this by changing the documentation to match reality. Signed-off-by:
-
Malcolm Priestley authored
On some USB controllers when endpoint 3 (used by HID) is not enabled this causes a USB reset. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Gregor Jasny authored
I've got an webcam upside down report for the following system: System Information Manufacturer: FUJITSU SIEMENS Product Name: AMILO Pi 2530 Version: Serial Number: UUID: <removed> Wake-up Type: Power Switch SKU Number: Not Specified Family: Not Specified Base Board Information Manufacturer: FUJITSU SIEMENS Product Name: F42 Version: 00030D0000000001 Serial Number: <removed> Currently an entry in the gspca/m5602 quirk table is missing. Signed-off-by:Gregor Jasny <gjasny@googlemail.com> Acked-by:
Erik Andrén <erik.andren@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Sean Young authored
"54fd321e [media] winbond: remove space from driver name" inadvertently renamed the input device name. Signed-off-by:
Sean Young <sean@mess.org> Acked-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
Randy Dunlap authored
Fix printk format warning for size_t variable: drivers/media/i2c/s5k4ecgx.c:346:2: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Jesper Juhl authored
Remember to collect the exit status from 'stk1160_read_reg()' in 'rc' before testing it for less than zero. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Acked-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
-
Matthijs Kooijman authored
This makes the cleanup on probe failure more consistent with other drivers. This is similar to what commit f27b853e ("[media] rc: Fix invalid free_region and/or free_irq on probe failure") did for some other drivers. In addition to making the cleanup more consistent, this also fixes a case where (on a ene_hw_detect failure) free_region would be called on a region that was not requested yet. This last problem was probably introduced by the moving of code in commit b31b0219 ("[media] ene_ir: Fix driver initialisation") and commit 9ef449c6 ("[media] rc: Postpone ISR registration"). Signed-off-by:
Matthijs Kooijman <matthijs@stdin.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by:
-
Paul Bolle authored
Building lirc_serial.o triggers this GCC warning: drivers/staging/media/lirc/lirc_serial.c: In function '__check_sense': drivers/staging/media/lirc/lirc_serial.c:1301:1: warning: return from incompatible pointer type [enabled by default] This can be trivially fixed by changing the 'sense' parameter from bool to int. But, to be safe, we also need to make sure 'sense' will only be -1, 0, or 1. There's no need to document the new values that are now allowed for the 'sense' parameter, since they're basically useless. Signed-off-by:Paul Bolle <pebolle@tiscali.nl> Cc: Jarod Wilson <jarod@wilsonet.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/radio/radio-tea5764.c:148:5: warning: no previous prototype for 'tea5764_i2c_read' [-Wmissing-prototypes] drivers/media/radio/radio-tea5764.c:168:5: warning: no previous prototype for 'tea5764_i2c_write' [-Wmissing-prototypes] drivers/media/radio/si4713-i2c.c:1772:6: warning: no previous prototype for 'si4713_ioctl' [-Wmissing-prototypes] Signed-off-by: -
Mauro Carvalho Chehab authored
Cc: Linux Media Mailing List <linux-media@vger.kernel.org> drivers/media/rc/fintek-cir.c:687:5: warning: no previous prototype for 'fintek_init' [-Wmissing-prototypes] drivers/media/rc/fintek-cir.c:692:6: warning: no previous prototype for 'fintek_exit' [-Wmissing-prototypes] Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/radio/wl128x/fmdrv_common.c:745:3: warning: comparison is always false due to limited range of data type [-Wtype-limits] drivers/media/radio/wl128x/fmdrv_rx.c:308:2: warning: comparison is always false due to limited range of data type [-Wtype-limits] Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/platform/soc_camera/soc_camera.c:1051:8: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/usb/au0828/au0828-dvb.c:275:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/i2c/cx25840/cx25840-core.c:2068:6: warning: no previous prototype for 'cx23885_dif_setup' [-Wmissing-prototypes] Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/pci/bt8xx/bttv-driver.c:308:3: warning: initialized field overwritten [-Woverride-init] drivers/media/pci/bt8xx/bttv-driver.c:308:3: warning: (near initialization for 'bttv_tvnorms[0].cropcap.bounds.height') [-Woverride-init] drivers/media/pci/bt8xx/bttv-driver.c: In function 'bttv_remove': drivers/media/pci/bt8xx/bttv-driver.c:4467:29: warning: suggest braces around empty body in an 'if' statement [-Wempty-body] Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/usb/zr364xx/zr364xx.c:1010:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Cc: Antoine Jacquet <royale@zerezo.com> Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/usb/usbvision/usbvision-core.c:1749:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/usb/s2255/s2255drv.c:1654:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/usb/em28xx/em28xx-cards.c:3309:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/usb/dvb-usb-v2/anysee.c:1179:5: warning: 'tmp' may be used uninitialized in this function [-Wmaybe-uninitialized] Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/tuners/tua9001.c:211:5: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized] Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/radio/wl128x/fmdrv_common.c:1619:47: warning: suggest braces around empty body in an 'else' statement [-Wempty-body] Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/usb/tlg2300/pd-video.c:891:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] drivers/media/usb/tlg2300/pd-video.c:926:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Cc: Huang Shijie <shijie8@gmail.com> Cc: Kang Yong <kangyong@telegent.com> Cc: Zhang Xiaobing <xbzhang@telegent.com> Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/platform/m2m-deinterlace.c:229:15: warning: variable 'd_size' set but not used [-Wunused-but-set-variable] Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/pci/meye/meye.c:1948:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/pci/saa7134/saa7134-core.c:947:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] drivers/media/pci/saa7164/saa7164-core.c:413:3: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] drivers/media/pci/saa7164/saa7164-core.c:489:3: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] drivers/media/pci/saa7134/saa7134-video.c:2514:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Signed-off-by: -
Mauro Carvalho Chehab authored
get rid of a few warnings about empty body: drivers/media/pci/ngene/ngene-core.c:756:3: warning: suggest braces around empty body in an 'else' statement [-Wempty-body] drivers/media/pci/ngene/ngene-cards.c:429:5: warning: suggest braces around empty body in an 'if' statement [-Wempty-body] Those are due to some commented code. Signed-off-by:
-
