- 27 Feb, 2017 14 commits
-
-
Thomas Gleixner authored
mac80211_hwsim initializes a hrtimer with clockid CLOCK_MONOTONIC_RAW. That's not supported. Use CLOCK_MONOTONIC instead. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Sara Sharon authored
When RX aggregation starts, transmitter may continue send frames with SN smaller than SSN until the AddBA response is received. However, the reorder buffer is already initialized at this point, which will cause the drop of such frames as duplicates since the head SN of the reorder buffer is set to the SSN, which is bigger. Cc: stable@vger.kernel.org Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Matt Chen authored
The issue was found when entering suspend and resume. It triggers a warning in: mac80211/key.c: ieee80211_enable_keys() ... WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt || sdata->crypto_tx_tailroom_pending_dec); ... It points out sdata->crypto_tx_tailroom_pending_dec isn't cleaned up successfully in a delayed_work during suspend. Add a flush_delayed_work to fix it. Cc: stable@vger.kernel.org Signed-off-by:Matt Chen <matt.chen@intel.com> Signed-off-by:
-
Johannes Berg authored
When adding per-CPU statistics, which added statistics back to mac80211 for the fast-RX path, I evidently forgot to add the "stats->packets++" line. The reason for that is likely that I didn't see it since it's done in defragmentation for the regular RX path. Add the missing line to properly count received packets in the fast-RX case. Fixes: c9c5962b ("mac80211: enable collecting station statistics per-CPU") Reported-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
-
Paul Hüber authored
l2tp_ip_backlog_recv may not return -1 if the packet gets dropped. The return value is passed up to ip_local_deliver_finish, which treats negative values as an IP protocol number for resubmission. Signed-off-by:
Paul Hüber <phueber@kernsp.in> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
Fix xfrm_neigh_lookup to provide dst->path to the neigh_lookup dst_ops method. When skb is provided, the IP address in packet should already match the dst->path address family. But for the non-skb case, we should consider the last tunnel address as nexthop address. Fixes: f894cbf8 ("net: Add optional SKB arg to dst_ops->neigh_lookup().") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
Herbert Xu authored
The current annotation is wrong as it says that we're only called under spinlock. In fact it should be marked as under either spinlock or RCU read lock. Fixes: da20420f ("rhashtable: Add nested tables") Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
Dan Carpenter reported a use before NULL check bug in the function bucket_table_free. In fact we don't need the NULL check at all as no caller can provide a NULL argument. So this patch fixes this by simply removing it. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Roman Mashak authored
nla_memdup_cookie was overwriting err value, declared at function scope and earlier initialized with result of ->init(). At success nla_memdup_cookie() returns 0, and thus module refcnt decremented, although the action was installed. $ sudo tc actions add action pass index 1 cookie 1234 $ sudo tc actions ls action gact action order 0: gact action pass random type none pass val 0 index 1 ref 1 bind 0 $ $ lsmod Module Size Used by act_gact 16384 0 ... $ $ sudo rmmod act_gact [ 52.310283] ------------[ cut here ]------------ [ 52.312551] WARNING: CPU: 1 PID: 455 at kernel/module.c:1113 module_put+0x99/0xa0 [ 52.316278] Modules linked in: act_gact(-) crct10dif_pclmul crc32_pclmul ghash_clmulni_intel psmouse pcbc evbug aesni_intel aes_x86_64 crypto_simd serio_raw glue_helper pcspkr cryptd [ 52.322285] CPU: 1 PID: 455 Comm: rmmod Not tainted 4.10.0+ #11 [ 52.324261] Call Trace: [ 52.325132] dump_stack+0x63/0x87 [ 52.326236] __warn+0xd1/0xf0 [ 52.326260] warn_slowpath_null+0x1d/0x20 [ 52.326260] module_put+0x99/0xa0 [ 52.326260] tcf_hashinfo_destroy+0x7f/0x90 [ 52.326260] gact_exit_net+0x27/0x40 [act_gact] [ 52.326260] ops_exit_list.isra.6+0x38/0x60 [ 52.326260] unregister_pernet_operations+0x90/0xe0 [ 52.326260] unregister_pernet_subsys+0x21/0x30 [ 52.326260] tcf_unregister_action+0x68/0xa0 [ 52.326260] gact_cleanup_module+0x17/0xa0f [act_gact] [ 52.326260] SyS_delete_module+0x1ba/0x220 [ 52.326260] entry_SYSCALL_64_fastpath+0x1e/0xad [ 52.326260] RIP: 0033:0x7f527ffae367 [ 52.326260] RSP: 002b:00007ffeb402a598 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 52.326260] RAX: ffffffffffffffda RBX: 0000559b069912a0 RCX: 00007f527ffae367 [ 52.326260] RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559b06991308 [ 52.326260] RBP: 0000000000000003 R08: 00007f5280264420 R09: 00007ffeb4029511 [ 52.326260] R10: 000000000000087b R11: 0000000000000202 R12: 00007ffeb4029580 [ 52.326260] R13: 0000000000000000 R14: 0000000000000000 R15: 0000559b069912a0 [ 52.354856] ---[ end trace 90d89401542b0db6 ]--- $ With the fix: $ sudo modprobe act_gact $ lsmod Module Size Used by act_gact 16384 0 ... $ sudo tc actions add action pass index 1 cookie 1234 $ sudo tc actions ls action gact action order 0: gact action pass random type none pass val 0 index 1 ref 1 bind 0 $ $ lsmod Module Size Used by act_gact 16384 1 ... $ sudo rmmod act_gact rmmod: ERROR: Module act_gact is in use $ $ sudo /home/mrv/bin/tc actions del action gact index 1 $ sudo rmmod act_gact $ lsmod Module Size Used by $ Fixes: 1045ba77 ("net sched actions: Add support for user cookies") Signed-off-by:Roman Mashak <mrv@mojatatu.com> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
David Howells authored
Calls made through the in-kernel interface can end up getting stuck because of a missed variable update in a loop in rxrpc_recvmsg_data(). The problem is like this: (1) A new packet comes in and doesn't cause a notification to be given to the client as there's still another packet in the ring - the assumption being that if the client will keep drawing off data until the ring is empty. (2) The client is in rxrpc_recvmsg_data(), inside the big while loop that iterates through the packets. This copies the window pointers into variables rather than using the information in the call struct because: (a) MSG_PEEK might be in effect; (b) we need a barrier after reading call->rx_top to pair with the barrier in the softirq routine that loads the buffer. (3) The reading of call->rx_top is done outside of the loop, and top is never updated whilst we're in the loop. This means that even through there's a new packet available, we don't see it and may return -EFAULT to the caller - who will happily return to the scheduler and await the next notification. (4) No further notifications are forthcoming until there's an abort as the ring isn't empty. The fix is to move the read of call->rx_top inside the loop - but it needs to be done before the condition is checked. Reported-by:Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
-
Roman Mashak authored
When tc actions are loaded as a module and no actions have been installed, flushing them would result in actions removed from the memory, but modules reference count not being decremented, so that the modules would not be unloaded. Following is example with GACT action: % sudo modprobe act_gact % lsmod Module Size Used by act_gact 16384 0 % % sudo tc actions ls action gact % % sudo tc actions flush action gact % lsmod Module Size Used by act_gact 16384 1 % sudo tc actions flush action gact % lsmod Module Size Used by act_gact 16384 2 % sudo rmmod act_gact rmmod: ERROR: Module act_gact is in use .... After the fix: % lsmod Module Size Used by act_gact 16384 0 % % sudo tc actions add action pass index 1 % sudo tc actions add action pass index 2 % sudo tc actions add action pass index 3 % lsmod Module Size Used by act_gact 16384 3 % % sudo tc actions flush action gact % lsmod Module Size Used by act_gact 16384 0 % % sudo tc actions flush action gact % lsmod Module Size Used by act_gact 16384 0 % sudo rmmod act_gact % lsmod Module Size Used by % Fixes: f97017cd ("net-sched: Fix actions flushing") Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
This allows to enable and run the accompanying test (test_parman) without dependencies on other users of parman. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Xin Long authored
Commit 5e1859fb ("ipv4: ipmr: various fixes and cleanups") fixed the issue for ipv4 ipmr: ip_mroute_setsockopt() & ip_mroute_getsockopt() should not access/set raw_sk(sk)->ipmr_table before making sure the socket is a raw socket, and protocol is IGMP The same fix should be done for ipv6 ipmr as well. This patch can fix the panic caused by overwriting the same offset as ipmr_table as in raw_sk(sk) when accessing other type's socket by ip_mroute_setsockopt(). Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
Commit b8607805 ("sctp: not copying duplicate addrs to the assoc's bind address list") tried to check for duplicate address before copying to asoc's bind_addr list from global addr list. But all the addrs' sin_ports in global addr list are 0 while the addrs' sin_ports are bp->port in asoc's bind_addr list. It means even if it's a duplicate address, af->cmp_addr will still return 0 as the their sin_ports are different. This patch is to fix it by setting the sin_port for addr param with bp->port before comparing the addrs. Fixes: b8607805 ("sctp: not copying duplicate addrs to the assoc's bind address list") Reported-by:
Wei Chen <weichen@redhat.com> Signed-off-by:
-
- 26 Feb, 2017 6 commits
-
-
Eric Dumazet authored
The cited commit makes a great job of finding optimal shift/multiplier values assuming a 10 seconds wrap around, but forgot to change the overflow_period computation. It overflows in cyclecounter_cyc2ns(), and the final result is 804 ms, which is silly. Lets simply use 5 seconds, no need to recompute this, given how it is supposed to work. Later, we will use a timer instead of a work queue, since the new RX allocation schem will no longer need mlx4_en_recover_from_oom() and the service_task firing every 250 ms. Fixes: 31c128b6 ("net/mlx4_en: Choose time-stamping shift value according to HW frequency") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
LABBE Corentin authored
This commit fix the typo argumnet/argument Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
LABBE Corentin authored
This commit fix the typo argumnet/argument Signed-off-by:
-
Julian Anastasov authored
Restore the lost masking of TOS in input route code to allow ip rules to match it properly. Problem [1] noticed by Shmulik Ladkani <shmulik.ladkani@gmail.com> [1] http://marc.info/?t=137331755300040&r=1&w=2 Fixes: 89aef892 ("ipv4: Delete routing cache.") Signed-off-by:
-
Julian Anastasov authored
Avoid matching of random stack value for uid when rules are looked up on input route or when RP filter is used. Problem should affect only setups that use ip rules with uid range. Fixes: 622ec2c9 ("net: core: add UID to flows, rules, and routes") Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake in pr_err message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
- 24 Feb, 2017 18 commits
-
-
Geert Uytterhoeven authored
With gcc-4.1.2 and -Os: drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_start_xmit’: drivers/net/ethernet/apm/xgene/xgene_enet_main.c:297: warning: ‘mss_index’ may be used uninitialized in this function Using a separate variable to track success may confuse the compiler. Preinitialize mss_index with -EBUSY and check for negative error values instead to kill the warning. Signed-off-by: -
Zhu Yanjun authored
When the function register_netdevice_notifier fails, the memory allocated by kmem_cache_create should be freed by the function kmem_cache_destroy. Cc: Joe Jin <joe.jin@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Brian Russell authored
When using IPv6 transport and a default dst, a pointer to the configured source address is passed into the route lookup. If no source address is configured, then the value is overwritten. IPv6 route lookup ignores egress ifindex match if the source address is set, so if egress ifindex match is desired, the source address must be passed as any. The overwrite breaks this for subsequent lookups. Avoid this by copying the configured address to an existing stack variable and pass a pointer to that instead. Fixes: 272d96a5 ("net: vxlan: lwt: Use source ip address during route lookup.") Signed-off-by:
Brian Russell <brussell@brocade.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
David Forster authored
Align vti6 with vti by returning GRE_KEY flag. This enables iproute2 to display tunnel keys on "ip -6 tunnel show" Signed-off-by:
David Forster <dforster@brocade.com> Signed-off-by:
-
Marc Dionne authored
In the rxrpc_read() function, which allows a user to read the contents of a key, we miscalculate the expected length of an encoded rxkad token by not taking into account the key length. However, the data is stored later anyway with an ENCODE_DATA() call - and an assertion failure then ensues when the lengths are checked at the end. Fix this by including the key length in the token size estimation. The following assertion is produced: Assertion failed - 384(0x180) == 380(0x17c) is false ------------[ cut here ]------------ kernel BUG at ../net/rxrpc/key.c:1221! invalid opcode: 0000 [#1] SMP Modules linked in: CPU: 2 PID: 2957 Comm: keyctl Not tainted 4.10.0-fscache+ #483 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 task: ffff8804013a8500 task.stack: ffff8804013ac000 RIP: 0010:rxrpc_read+0x10de/0x11b6 RSP: 0018:ffff8804013afe48 EFLAGS: 00010296 RAX: 000000000000003b RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300 RBP: ffff8804013afed8 R08: 0000000000000001 R09: 0000000000000001 R10: ffff8804013afd90 R11: 0000000000000002 R12: 00005575f7c911b4 R13: 00005575f7c911b3 R14: 0000000000000157 R15: ffff880408a5d640 FS: 00007f8dfbc73700(0000) GS:ffff88041fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005575f7c91008 CR3: 000000040120a000 CR4: 00000000001406e0 Call Trace: keyctl_read_key+0xb6/0xd7 SyS_keyctl+0x83/0xe7 do_syscall_64+0x80/0x191 entry_SYSCALL64_slow_path+0x25/0x25 Signed-off-by:
-
Florian Fainelli authored
Dan's static checker caught a potential code path in phy_state_machine() where we were not checking phydev->drv which is in phy_aneg_done(). Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Matthias Schiffer authored
The incorrect check caused an off-by-one error: the maximum VID 0xffffff was unusable. Fixes: d342894c ("vxlan: virtual extensible lan") Signed-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> Acked-by:
-
Jon Paul Maloy authored
In the function tipc_rcv() we initialize a couple of stack variables from the message header before that same header has been validated. In rare cases when the arriving header is non-linar, the validation function itself may linearize the buffer by calling skb_may_pull(), while the wrongly initialized stack fields are not updated accordingly. We fix this in this commit. Reported-by:
Matthew Wong <mwong@sonusnet.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
LABBE Corentin authored
The stmmac driver have two methods for registers dumps: via ethtool and at init (if NETIF_MSG_HW is enabled). It is better to keep only one method, ethtool, since the other was ugly. This patch convert all dump_regs() function from "printing regs" to "fill the reg_space used by ethtool". Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Wu Fengguang authored
net/rds/ib.c:115:2-7: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values. NULL check before some freeing functions is not needed. Based on checkpatch warning "kfree(NULL) is safe this check is probably not required" and kfreeaddr.cocci by Julia Lawall. Generated by: scripts/coccinelle/free/ifnullfree.cocci Signed-off-by:
-
Marcelo Ricardo Leitner authored
commit 2dcab598 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf") attempted to avoid a BUG_ON call when the association being used for a sendmsg() is blocked waiting for more sndbuf and another thread did a peeloff operation on such asoc, moving it to another socket. As Ben Hutchings noticed, then in such case it would return without locking back the socket and would cause two unlocks in a row. Further analysis also revealed that it could allow a double free if the application managed to peeloff the asoc that is created during the sendmsg call, because then sctp_sendmsg() would try to free the asoc that was created only for that call. This patch takes another approach. It will deny the peeloff operation if there is a thread sleeping on the asoc, so this situation doesn't exist anymore. This avoids the issues described above and also honors the syscalls that are already being handled (it can be multiple sendmsg calls). Joint work with Xin Long. Fixes: 2dcab598 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf") Cc: Alexander Popov <alex.popov@linux.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull namespace updates from Eric Biederman: "There is a lot here. A lot of these changes result in subtle user visible differences in kernel behavior. I don't expect anything will care but I will revert/fix things immediately if any regressions show up. From Seth Forshee there is a continuation of the work to make the vfs ready for unpriviled mounts. We had thought the previous changes prevented the creation of files outside of s_user_ns of a filesystem, but it turns we missed the O_CREAT path. Ooops. Pavel Tikhomirov and Oleg Nesterov worked together to fix a long standing bug in the implemenation of PR_SET_CHILD_SUBREAPER where only children that are forked after the prctl are considered and not children forked before the prctl. The only known user of this prctl systemd forks all children after the prctl. So no userspace regressions will occur. Holding earlier forked children to the same rules as later forked children creates a semantic that is sane enough to allow checkpoing of processes that use this feature. There is a long delayed change by Nikolay Borisov to limit inotify instances inside a user namespace. Michael Kerrisk extends the API for files used to maniuplate namespaces with two new trivial ioctls to allow discovery of the hierachy and properties of namespaces. Konstantin Khlebnikov with the help of Al Viro adds code that when a network namespace exits purges it's sysctl entries from the dcache. As in some circumstances this could use a lot of memory. Vivek Goyal fixed a bug with stacked filesystems where the permissions on the wrong inode were being checked. I continue previous work on ptracing across exec. Allowing a file to be setuid across exec while being ptraced if the tracer has enough credentials in the user namespace, and if the process has CAP_SETUID in it's own namespace. Proc files for setuid or otherwise undumpable executables are now owned by the root in the user namespace of their mm. Allowing debugging of setuid applications in containers to work better. A bug I introduced with permission checking and automount is now fixed. The big change is to mark the mounts that the kernel initiates as a result of an automount. This allows the permission checks in sget to be safely suppressed for this kind of mount. As the permission check happened when the original filesystem was mounted. Finally a special case in the mount namespace is removed preventing unbounded chains in the mount hash table, and making the semantics simpler which benefits CRIU. The vfs fix along with related work in ima and evm I believe makes us ready to finish developing and merge fully unprivileged mounts of the fuse filesystem. The cleanups of the mount namespace makes discussing how to fix the worst case complexity of umount. The stacked filesystem fixes pave the way for adding multiple mappings for the filesystem uids so that efficient and safer containers can be implemented" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc/sysctl: Don't grab i_lock under sysctl_lock. vfs: Use upper filesystem inode in bprm_fill_uid() proc/sysctl: prune stale dentries during unregistering mnt: Tuck mounts under others instead of creating shadow/side mounts. prctl: propagate has_child_subreaper flag to every descendant introduce the walk_process_tree() helper nsfs: Add an ioctl() to return owner UID of a userns fs: Better permission checking for submounts exit: fix the setns() && PR_SET_CHILD_SUBREAPER interaction vfs: open() with O_CREAT should not create inodes with unknown ids nsfs: Add an ioctl() to return the namespace type proc: Better ownership of files for non-dumpable tasks in user namespaces exec: Remove LSM_UNSAFE_PTRACE_CAP exec: Test the ptracer's saved cred to see if the tracee can gain caps exec: Don't reset euid and egid when the tracee has CAP_SETUID inotify: Convert to using per-namespace limits
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.11. Nothing too major, the tinydrm and mmu-less support should make writing smaller drivers easier for some of the simpler platforms, and there are a bunch of documentation updates. Intel grew displayport MST audio support which is hopefully useful to people, and FBC is on by default for GEN9+ (so people know where to look for regressions). AMDGPU has a lot of fixes that would like new firmware files installed for some GPUs. Other than that it's pretty scattered all over. I may have a follow up pull request as I know BenH has a bunch of AST rework and fixes and I'd like to get those in once they've been tested by AST, and I've got at least one pull request I'm just trying to get the author to fix up. Core: - drm_mm reworked - Connector list locking and iterators - Documentation updates - Format handling rework - MMU-less support for fbdev helpers - drm_crtc_from_index helper - Core CRC API - Remove drm_framebuffer_unregister_private - Debugfs cleanup - EDID/Infoframe fixes - Release callback - Tinydrm support (smaller drivers for simple hw) panel: - Add support for some new simple panels i915: - FBC by default for gen9+ - Shared dpll cleanups and docs - GEN8 powerdomain cleanup - DMC support on GLK - DP MST audio support - HuC loading support - GVT init ordering fixes - GVT IOMMU workaround fix amdgpu/radeon: - Power/clockgating improvements - Preliminary SR-IOV support - TTM buffer priority and eviction fixes - SI DPM quirks removed due to firmware fixes - Powerplay improvements - VCE/UVD powergating fixes - Cleanup SI GFX code to match CI/VI - Support for > 2 displays on 3/5 crtc asics - SI headless fixes nouveau: - Rework securre boot code in prep for GP10x secure boot - Channel recovery improvements - Initial power budget code - MMU rework preperation vmwgfx: - Bunch of fixes and cleanups exynos: - Runtime PM support for MIC driver - Cleanups to use atomic helpers - UHD Support for TM2/TM2E boards - Trigger mode fix for Rinato board etnaviv: - Shader performance fix - Command stream validator fixes - Command buffer suballocator rockchip: - CDN DisplayPort support - IOMMU support for arm64 platform imx-drm: - Fix i.MX5 TV encoder probing - Remove lower fb size limits msm: - Support for HW cursor on MDP5 devices - DSI encoder cleanup - GPU DT bindings cleanup sti: - stih410 cleanups - Create fbdev at binding - HQVDP fixes - Remove stih416 chip functionality - DVI/HDMI mode selection fixes - FPS statistic reporting omapdrm: - IRQ code cleanup dwi-hdmi bridge: - Cleanups and fixes adv-bridge: - Updates for nexus sii8520 bridge: - Add interlace mode support - Rework HDMI and lots of fixes qxl: - probing/teardown cleanups ZTE drm: - HDMI audio via SPDIF interface - Video Layer overlay plane support - Add TV encoder output device atmel-hlcdc: - Rework fbdev creation logic tegra: - OF node fix fsl-dcu: - Minor fixes mali-dp: - Assorted fixes sunxi: - Minor fix" [ This was the "fixed" pull, that still had build warnings due to people not even having build tested the result. I'm not a happy camper I've fixed the things I noticed up in this merge. - Linus ] * tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits) lib/Kconfig: make PRIME_NUMBERS not user selectable drm/tinydrm: helpers: Properly fix backlight dependency drm/tinydrm: mipi-dbi: Fix field width specifier warning drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files drm/amd/powerplay: fix PSI feature on Polars12 drm/amdgpu: refuse to reserve io mem for split VRAM buffers drm/ttm: fix use-after-free races in vm fault handling drm/tinydrm: Add support for Multi-Inno MI0283QT display dt-bindings: Add Multi-Inno MI0283QT binding dt-bindings: display/panel: Add common rotation property of: Add vendor prefix for Multi-Inno drm/tinydrm: Add MIPI DBI support drm/tinydrm: Add helper functions drm: Add DRM support for tiny LCD displays drm/amd/amdgpu: post card if there is real hw resetting performed drm/nouveau/tmr: provide backtrace when a timeout is hit drm/nouveau/pci/g92: Fix rearm drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios drm/nouveau/hwmon: expose power_max and power_crit ..
-
Dave Airlie authored
Linus doesn't like it user selectable, so kill it until someone needs it for something else. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
Noralf Trønnes authored
BACKLIGHT_CLASS_DEVICE was selected in the last version of the tinydrm patchset to fix the backlight dependency, but the ifdef CONFIG_BACKLIGHT_CLASS_DEVICE was forgotten. Fix that. Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
Noralf Trønnes authored
This warning is seen on 64-bit builds in functions: 'mipi_dbi_typec1_command': 'mipi_dbi_typec3_command_read': 'mipi_dbi_typec3_command': >> drivers/gpu/drm/tinydrm/mipi-dbi.c:65:20: warning: field width specifier '*' expects argument of type 'int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] DRM_DEBUG_DRIVER("cmd=%02x, par=%*ph\n", cmd, len, data); \ ^ include/drm/drmP.h:228:40: note: in definition of macro 'DRM_DEBUG_DRIVER' drm_printk(KERN_DEBUG, DRM_UT_DRIVER, fmt, ##__VA_ARGS__) ^~~ >> drivers/gpu/drm/tinydrm/mipi-dbi.c:671:2: note: in expansion of macro 'MIPI_DBI_DEBUG_COMMAND' MIPI_DBI_DEBUG_COMMAND(cmd, parameters, num); ^~~~~~~~~~~~~~~~~~~~~~ Fix by casting 'len' to int in the macro MIPI_DBI_DEBUG_COMMAND(). There is no chance of overflow. Signed-off-by: -
Noralf Trønnes authored
Fix this warning: drivers/gpu/drm/tinydrm/mipi-dbi.c: In function ‘mipi_dbi_debugfs_command_write’: drivers/gpu/drm/tinydrm/mipi-dbi.c:905:8: warning: ‘cmd’ may be used uninitialized in this function [-Wmaybe-uninitialized] ret = mipi_dbi_command_buf(mipi, cmd, parameters, i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cmd can't be used uninitialized, but to satisfy the compiler, initialize it to zero. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull usercopy test fix from Kees Cook: "Fix for non-MMU ARM testing, from Arnd Bergmann" * tag 'usercopy-v4.11-rc1.fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: ARM NOMMU has no 64-bit get_user
-
- 23 Feb, 2017 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs. A handful of driver changes this time around. The larger changes are: - Reset drivers for hi3660 and zx2967 - AHCI driver for Davinci, acked by Tejun and brought in here due to platform dependencies - Cleanups of atmel-ebi (External Bus Interface) - Tweaks for Rockchip GRF (General Register File) usage (kitchensink misc register range on the SoCs) - PM domains changes for support of two new ZTE SoCs (zx296718 and zx2967)" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) soc: samsung: pmu: Add register defines for pad retention control reset: make zx2967 explicitly non-modular reset: core: fix reset_control_put soc: samsung: pm_domains: Read domain name from the new label property soc: samsung: pm_domains: Remove message about failed memory allocation soc: samsung: pm_domains: Remove unused name field soc: samsung: pm_domains: Use full names in subdomains registration log sata: ahci-da850: un-hardcode the MPY bits sata: ahci-da850: add a workaround for controller instability sata: ahci: export ahci_do_hardreset() locally sata: ahci-da850: implement a workaround for the softreset quirk sata: ahci-da850: add device tree match table sata: ahci-da850: get the sata clock using a connection id soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register memory: atmel-ebi: Enable the SMC clock if specified soc: samsung: pmu: Remove unused and duplicated defines memory: atmel-ebi: Properly handle multiple reference to the same CS memory: atmel-ebi: Fix the test to enable generic SMC logic soc: samsung: pm_domains: Add new Exynos5433 compatible soc: samsung: pmu: Add dummy support for Exynos5433 SoC ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM 64-bit DT updates from Arnd Bergmann: "ARM64 DT updates are fairly small this time, only two new SoCs and a handful of new machines get added, all of them similar to other hardware we already support. New SoC: - HiSilicon Kirin960/Hi3660 and HiKey960 development board - NXP LS1012a with three reference boards: http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-layerscape-arm-processors/qoriq-layerscape-1012a-low-power-communication-processor:LS1012A New development board: - Banana Pi M64, based on Allwinner A64: http://www.banana-pi.org/m64.html - SolidRun MACCHIATOBin based on Marvell Armada 8K: https://www.solid-run.com/marvell-armada-family/armada-8040-community-board/ - Broadcom BCM958712DxXMC NorthStar2 reference board (another one) A lot of platforms improve support for existing machines by adding extra devices for which a binding and driver is availabe: Allwinner: - MMC, USB ARM Juno: - Coresight, STM Broadcom: - NS2 GICv2m irqchip and PCIe Marvell: - Armada 3700 SPI, I2C, ethernet switch Mediatek: - MT8173 thermal NXP i.MX: - LS1046A thermal Qualcomm: - coresight on MSM8916, HDMI, WCNSS, SCM Renesas: - r8a779[56] thermal, powerdomain, ethernet, sound, pwm, can, can fd Rockchip: - thermal, eDP, pinctrl enhancements Samsung: - TM2 touchkey, Exynos5433 HDMI and power management improvements UniPhier: - SD reset, eMMC controller ZTE: - oppv2 cpufreq" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (110 commits) arm64: dts: qcom: Add msm8916 CoreSight components arm64: dts: marvell: adjust name of sd-mmc-gop clock in syscon arm64: allwinner: add BananaPi-M64 support arm64: allwinner: a64: add UART1 pin nodes arm64: allwinner: pine64: add MMC support arm64: allwinner: a64: Increase the MMC max frequency arm64: allwinner: a64: Add MMC pinctrl nodes arm64: allwinner: a64: Add MMC nodes dt-bindings: clockgen: Add compatible string for LS1012A Documentation: DT: add LS1012A compatible for SCFG and DCFG Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci arm64: tegra: Use symbolic reset identifiers arm64: dts: r8a7796: Mark EthernetAVB device node disabled arm64: dts: r8a7795: Mark EthernetAVB device node disabled arm64: dts: r8a7795: tidyup audma definition order arm64: dts: r8a7796: Link ARM GIC to clock and clock domain arm64: dts: r8a7795: Link ARM GIC to clock and clock domain arm64: dts: r8a7796: Add R-Car Gen3 thermal support arm64: dts: r8a7795: Add R-Car Gen3 thermal support ...
-
