- 24 Nov, 2019 40 commits
-
-
Ricardo Ribalda Delgado authored
[ Upstream commit ef0de747 ] During probe, if there was an error the memory region and the memory map were not properly released.This can lead a system unusable if deferred probe is in use. Replace mem_request and map with devm_ioremap_resource Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
SolidHal authored
[ Upstream commit c216765d ] The bug would let the usb controller enter partial power down, which was formally known as hibernate, upon boot if nothing was plugged in to the port. Partial power down couldn't be exited properly, so any usb devices plugged in after boot would not be usable. Before the name change, params.hibernation was false by default, so _dwc2_hcd_suspend() would skip entering hibernation. With the rename, _dwc2_hcd_suspend() was changed to use params.power_down to decide whether or not to enter partial power down. Since params.power_down is non-zero by default, it needs to be set to 0 for rockchip devices to restore functionality. This bug was reported in the linux-usb thread: REGRESSION: usb: dwc2: USB device not seen after boot The commit that caused this regression is: 6d23ee9cSigned-off-by:
SolidHal <hal@halemmerich.com> Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 56445eef ] Fix interrupt-out transfer length which was being set to the transfer-buffer length rather than the size of the outgoing packet. Note that no slab data was leaked as the whole transfer buffer is always cleared before each transfer. Fixes: 9aa8dae7 ("cypress_m8: use usb_fill_int_urb where appropriate") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Cameron Kaiser authored
[ Upstream commit 1006284c ] When an OS (currently only classic Mac OS) is running in KVM-PR and makes a linked jump from code with split hack addressing enabled into code that does not, LR is not correctly updated and reflects the previously munged PC. To fix this, this patch undoes the address munge when exiting split hack mode so that code relying on LR being a proper address will now execute. This does not affect OS X or other operating systems running on KVM-PR. Signed-off-by:
Cameron Kaiser <spectre@floodgap.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Vasundhara Volam authored
[ Upstream commit 3a1d52a5 ] Return proper error code when Firmware returns HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED for HWRM_NVM_GET/SET_VARIABLE commands. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Michael Pobega authored
[ Upstream commit d153135e ] The Elo VuPoint 15MX has two headphone jacks of which neither work by default. Disabling automute allows ALSA to work normally with the speakers & left headphone jack. Future pin configuration changes may be required in the future to get the right headphone jack working in tandem. Signed-off-by:
Michael Pobega <mpobega@neverware.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jacopo Mondi authored
[ Upstream commit eccf442c ] Currently the adv748x driver will fail to probe unless both of its output endpoints (TXA and TXB) are connected. Make the driver support probing provided that there is at least one input, and one output connected and protect the clean-up function from accessing un-initialized fields. Following patches will fix other uses of un-initialized TXs in the driver, such as power management functions. Tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Niklas Söderlund authored
[ Upstream commit 4e673ed4 ] When adding support for parallel subdev for Gen3 it was missed that the symbol 'i' in rvin_group_link_notify() was already declared, remove the dupe as it's only used as a loop variable this have no functional change. This fixes warning: rcar-core.c:117:52: originally declared here rcar-core.c:173:30: warning: symbol 'i' shadows an earlier one Fixes: 1284605d ("media: rcar-vin: Handle parallel subdev in link_notify") Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
-
Nathan Chancellor authored
[ Upstream commit 44d7f1a7 ] Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/media/platform/pxa_camera.c:2400:17: warning: address of 'pdev->dev.of_node' will always evaluate to 'true' [-Wpointer-bool-conversion] if (&pdev->dev.of_node && !pcdev->pdata) { ~~~~~~~~~~^~~~~~~ ~~ 1 warning generated. Judging from the rest of the kernel, it seems like this was an error and just the value of of_node should be checked rather than the address. Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
Matthias Reichl authored
[ Upstream commit 85e4af0a ] The Kathrein RCU-676 remote uses the 32-bit rc6 protocol and toggles bit 15 (0x8000) on repeated button presses, like MCE remotes. Add it's customer code 0x80460000 to the 32-bit rc6 toggle handling code to get proper scancodes and toggle reports. Signed-off-by:
Matthias Reichl <hias@horus.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 8fa74e3c ] Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/qlogic/qed/qed_ll2.c:799:32: warning: implicit conversion from enumeration type 'enum core_tx_dest' to different enumeration type 'enum qed_ll2_tx_dest' [-Wenum-conversion] tx_pkt.tx_dest = p_ll2_conn->tx_dest; ~ ~~~~~~~~~~~~^~~~~~~ 1 warning generated. Fix this by using a switch statement to convert between the enumerated values since they are not 1 to 1, which matches how the rest of the driver handles this conversion. Link: https://github.com/ClangBuiltLinux/linux/issues/125Suggested-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 6adde4a3 ] Clang warns when one enumerated type is implicitly converted to another. drivers/ata/pata_ep93xx.c:662:36: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] drv_data->dma_rx_data.direction = DMA_FROM_DEVICE; ~ ^~~~~~~~~~~~~~~ drivers/ata/pata_ep93xx.c:670:36: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] drv_data->dma_tx_data.direction = DMA_TO_DEVICE; ~ ^~~~~~~~~~~~~ drivers/ata/pata_ep93xx.c:681:19: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] conf.direction = DMA_FROM_DEVICE; ~ ^~~~~~~~~~~~~~~ drivers/ata/pata_ep93xx.c:692:19: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] conf.direction = DMA_TO_DEVICE; ~ ^~~~~~~~~~~~~ Use the equivalent valued enums from the expected type so that Clang no longer warns about a conversion. DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1 DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2 Acked-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Nicholas Piggin authored
[ Upstream commit 053c5a75 ] Local radix TLB flush operations that operate on congruence classes have explicit ERAT flushes for POWER9. The process scoped LPID flush did not have a flush, so add it. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Anton Blanchard authored
[ Upstream commit 8b78fdb0 ] We currently cap the decrementer clockevent at 4 seconds, even on systems with large decrementer support. Fix this by converting the code to use clockevents_register_device() which calculates the upper bound based on the max_delta passed in. Signed-off-by:
Anton Blanchard <anton@ozlabs.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 8e9f7265 ] The q6asm_audio_client_alloc() doesn't return NULL, it returns error pointers. Fixes: 2a9e92d3 ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit 5f26bdce ] If the CPU exits the "polling" state due to the time limit in the loop in poll_idle(), this is not a real wakeup and it just means that the "polling" state selection was not adequate. The governor mispredicted short idle duration, but had a more suitable state been selected, the CPU might have spent more time in it. In fact, there is no reason to expect that there would have been a wakeup event earlier than the next timer in that case. Handling such cases as regular wakeups in menu_update() may cause the menu governor to make suboptimal decisions going forward, but ignoring them altogether would not be correct either, because every time menu_select() is invoked, it makes a separate new attempt to predict the idle duration taking distinct time to the closest timer event as input and the outcomes of all those attempts should be recorded. For this reason, make menu_update() always assume that if the "polling" state was exited due to the time limit, the next proper wakeup event for the CPU would be the next timer event (not including the tick). Fixes: a37b969a "cpuidle: poll_state: Add time limit to poll_idle()" Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Bob Moore authored
[ Upstream commit 8b1cafdc ] These address spaces are defined by the ACPI spec to be "always available", and thus _REG should never be run on them. Provides compatibility with other ACPI implementations. Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Erik Schmauss <erik.schmauss@intel.com> Signed-off-by:
-
Viresh Kumar authored
[ Upstream commit 09f662f9 ] Return error number instead of 0 on failures. Fixes: a1e8c136 ("PM / OPP: "opp-hz" is optional for power domains") Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Jordan Crouse authored
[ Upstream commit 32aa27e1 ] The point of the 'force_dma' parameter for of_dma_configure is to force the device to be set up even if DMA capability is not described by the firmware which is exactly the use case we have for GMU - we need SMMU to get set up but we have no other dma capabilities since memory is managed by the GPU driver. Currently we pass false so of_dma_configure() fails and subsequently GMU and GPU probe does as well. Fixes: 4b565ca5 ("drm/msm: Add A6XX device support") Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Tested-by:
Sibi Sankar <sibis@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Arun Kumar Neelakantam authored
[ Upstream commit 928002a5 ] The current rx peak function fails to read the data if size is less than 4bytes. Use memcpy_fromio to support data reads of size less than 4 bytes. Cc: stable@vger.kernel.org Fixes: f0beb4ba ("rpmsg: glink: Remove chunk size word align warning") Signed-off-by:
Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit b56511c1 ] Clang warns when one enumerated type is implicitly converted to another. drivers/infiniband/hw/mlx4/mad.c:1811:41: warning: implicit conversion from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration type 'enum ib_qp_create_flags' [-Wenum-conversion] qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_TUNNEL_QP; ~ ^~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/mlx4/mad.c:1819:41: warning: implicit conversion from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration type 'enum ib_qp_create_flags' [-Wenum-conversion] qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_SQP; ~ ^~~~~~~~~~~~~~~~~ The type mlx4_ib_qp_flags explicitly provides supplemental values to the type ib_qp_create_flags. Make that clear to Clang by changing the create_flags type to u32. Reported-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Lijun Ou authored
[ Upstream commit 05ad5482 ] The hip08 split two hardware version. The version id are 0x20 and 0x21 according to the PCI revison. The max size of extend sge of sq is limited to 2M for 0x20 version and 8M for 0x21 version. It may be exceeded to 2M according to the algorithm that compute the product of wqe count and extend sge number of every wqe. But the product always less than 8M. Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
Lijun Ou authored
[ Upstream commit 15fc056f ] It will print the warning when the MSB bit of SLID is not zero running cm_req_handler function that test CM. It needs to fixed zero when test RoCE device. Signed-off-by:
-
Lijun Ou authored
[ Upstream commit c80e0661 ] When user issues a RDMA read and enables sq inline, it needs to report a bad wr to user. Signed-off-by:
-
Lijun Ou authored
[ Upstream commit 06ef0ee4 ] It needs to include two special qps for every port. The hip08 have four ports and the all reserved qp numbers are eight. Signed-off-by:
-
Zhu Yanjun authored
[ Upstream commit aae0484e ] In rxe_queue_init, q and q->buf are allocated. In do_mmap_info, q->ip is allocated. When error occurs, rxe_srq_from_init and the later error handler do not free these allocated memories. This will make memory leak. Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 39f24956 ] Fix to return a negative error code from the mthca_cmd_init() error handling case instead of 0, as done elsewhere in this function. Fixes: 80fd8238 ("[PATCH] IB/mthca: Encapsulate command interface init") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Radoslaw Tyl authored
[ Upstream commit 5d826d20 ] This patch fix crash when we have restore flow director filters after reset adapter. In ixgbe_fdir_filter_restore() filter->action is outside of the rx_ring array, as it has a VF identifier in the upper 32 bits. Signed-off-by:
Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 43ade6ad ] Clang warns when one enumerated type is converted implicitly to another. drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4214:42: warning: implicit conversion from enumeration type 'enum i40e_aq_link_speed' to different enumeration type 'enum virtchnl_link_speed' [-Wenum-conversion] pfe.event_data.link_event.link_speed = I40E_LINK_SPEED_40GB; ~ ^~~~~~~~~~~~~~~~~~~~ 1 warning generated. Use the proper enum from virtchnl_link_speed, which has the same value as I40E_LINK_SPEED_40GB, VIRTCHNL_LINK_SPEED_40GB. This appears to be missed by commit ff3f4cc2 ("virtchnl: finish conversion to virtchnl interface"). Link: https://github.com/ClangBuiltLinux/linux/issues/81Signed-off-by:
-
Radoslaw Tyl authored
[ Upstream commit 8d7179b1 ] We have Tx hang when number Tx and XDP queues are more than 64. In XDP always is MTQC == 0x0 (64TxQs). We need more space for Tx queues. Signed-off-by:
-
NeilBrown authored
[ Upstream commit 059421e0 ] Commit 35bfc521 ("md: allow metadata update while suspending.") added support for allowing md_check_recovery() to still perform metadata updates while the array is entering the 'suspended' state. This is needed to allow the processes of entering the state to complete. Unfortunately, the patch doesn't really work. The test for "mddev->suspended" at the start of md_check_recovery() means that the function doesn't try to do anything at all while entering suspend. This patch moves the code of updating the metadata while suspending to *before* the test on mddev->suspended. Reported-by:
Jeff Mahoney <jeffm@suse.com> Fixes: 35bfc521 ("md: allow metadata update while suspending.") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Anirudh Venkataramanan authored
[ Upstream commit be8ff000 ] When adding a rule, queue region size needs to be provided as log base 2 of the number of queues in region. Fix that. Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
-
Sergei Shtylyov authored
[ Upstream commit 37e7742c ] The driver seems to abuse *unsigned long* not only for the (32-bit) register values but also for the 'sh_cmt_channel::total_cycles' which needs to always be 64-bit -- as a result, the clocksource's mask is needlessly clamped down to 32-bits on the 32-bit machines... Fixes: 19bdc9d0 ("clocksource: sh_cmt clocksource support") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit 22627c6f ] When trying to use CMT for clockevents on R-Car gen3 SoCs, I noticed that 'max_delta_ns' for the broadcast timer (CMT) was shown as 1000 in /proc/timer_list. It turned out that when calculating it, the driver did 1 << 32 (causing what I think was undefined behavior) resulting in a zero delta, later clamped to 1000 by cev_delta2ns(). The root cause turned out to be that the driver abused *unsigned long* for the CMT register values (which are 16/32-bit), so that the calculation of 'ch->max_match_value' in sh_cmt_setup_channel() used the wrong branch. Using more proper 'u32' instead fixed 'max_delta_ns' and even fixed the switching an active clocksource to CMT (which caused the system to turn non-interactive before). Signed-off-by:
-
Gustavo Pimentel authored
[ Upstream commit fef31eca ] Current compilation produces the following warnings: tools/pci/pcitest.c: In function 'run_test': tools/pci/pcitest.c:56:9: warning: unused variable 'time' [-Wunused-variable] double time; ^~~~ tools/pci/pcitest.c:55:25: warning: unused variable 'end' [-Wunused-variable] struct timespec start, end; ^~~ tools/pci/pcitest.c:55:18: warning: unused variable 'start' [-Wunused-variable] struct timespec start, end; ^~~~~ tools/pci/pcitest.c:146:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ Fix them: - remove unused variables - change function return from int to void, since it's not used Signed-off-by:
Gustavo Pimentel <gustavo.pimentel@synopsys.com> [lorenzo.pieralisi@arm.com: rewrote the commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Chen Yu authored
[ Upstream commit 749fa170 ] Currently if get_e820_md5() fails, then it will hibernate nevertheless. Actually the error code should be propagated to upper caller so that the hibernation could be aware of the result and terminates the process if md5 digest fails. Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Chen Yu <yu.c.chen@intel.com> Acked-by:
-
Nathan Chancellor authored
[ Upstream commit e2bfa4ca ] Clang warns when one enumerated type is converted implicitly to another: drivers/mtd/nand/raw/sh_flctl.c:483:46: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_DEV_TO_MEM) > 0) ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~ drivers/mtd/nand/raw/sh_flctl.c:542:46: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_MEM_TO_DEV) > 0) ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~ 2 warnings generated. Use the proper enums from dma_data_direction to satisfy Clang. DMA_MEM_TO_DEV = DMA_TO_DEVICE = 1 DMA_DEV_TO_MEM = DMA_FROM_DEVICE = 2 Reported-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Tudor Ambarus authored
[ Upstream commit f602b487 ] The offsets for the bootloader environment and its redundant partition were inverted. Fix the addresses to match our nand flash map available at: http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.pngSigned-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
-
Tudor Ambarus authored
[ Upstream commit 6f270d88 ] at91sam9x5cm comes with a 2Gb NAND flash. Fix the rootfs size to match this limit. Signed-off-by:
-
Tudor Ambarus authored
[ Upstream commit df90fc64 ] sama5d4_xplained comes with a 4Gb NAND flash. Increase the rootfs size to match this limit. Signed-off-by:
-
