- 24 Feb, 2016 40 commits
-
-
Suganath prabu Subramani authored
Deallocate resources before reallocating of the same in retry_allocation path of _base_allocate_memory_pools() Signed-off-by:
Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by:
Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Alan authored
If you feed 32 bytes in then the kstrtoull() doesn't receive a terminated string so will run off the end. Signed-off-by:
Alan Cox <alan@linux.intel.com> Reviewed-by:
-
Alan authored
Check the array size *before* dereferencing it with a user provided offset. Signed-off-by:
-
Alan authored
We were setting the queue depth correctly, then setting it back to two. If you hit this as a bisection point then please send me an email as it would imply we've been hiding other bugs with this one. Cc: <stable@vger.kernel.org> Signed-off-by:
Hannes Reinicke <hare@suse.de> Signed-off-by:
-
Tyrel Datwyler authored
When logging async events the scsi_id, wwpn, and node_name values are used directly from the CRQ struct which are of type __be64. This can be confusing to someone looking through the log on a LE system. Instead byteswap these values to host endian prior to logging. Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Reviewed-by:
-
Tyrel Datwyler authored
In a couple places the magic value of 2 is used to check the return code of hypercalls. This translates to H_CLOSED. Signed-off-by:
-
Tyrel Datwyler authored
The values returned by the show functions for the host os_type, mad_version, and partition_number attributes get their values directly from the madapter_info struct whose associated fields are __be32 typed. Added endian conversion to ensure these values are sane on LE platforms. Signed-off-by:
-
Tyrel Datwyler authored
A VIOSRP_HOST_CONFIG_TYPE management datagram (MAD) has existed in the code for some time. From what information I've gathered from Brian King this was likely implemented on the host side in a SLES 9 based VIOS, which is no longer supported anywhere. Further, it is not defined in PAPR or supported by any AIX based VIOS. Treating as bit rot and removing the associated host config code. The config attribute and its show function are left as not to break userspace. The behavior remains the same returning nothing. Signed-off-by:
-
Tyrel Datwyler authored
The root node of the OF device tree is exported as of_root. No need to look up the root by path name. Instead just get a reference directly via of_root. Signed-off-by:
-
Tyrel Datwyler authored
Add defines for mad version and mad os_type, and replace the magic numbers in set_adapter_info() accordingly. Signed-off-by:
Manoj Kumar <manoj@linux.vnet.ibm.com> Signed-off-by:
-
Tyrel Datwyler authored
The PAPR defines four valid header values for the first byte of a CRQ message. Namely, an unused/empty message (0x00), a valid command/response entry (0x80), a valid initialization entry (0xC0), and a valid transport event (0xFF). Further, initialization responses have two formats namely initialize (0x01) and initialize complete (0x02). Define these values as enums and use them in the code in place of their magic number equivalents. Signed-off-by:
-
Tyrel Datwyler authored
The enum values for VIOSRP_LINUX_FORMAT and VIOSRP_INLINE_FORMAT are off by one. They are currently defined as 0x06 and 0x07 respetively. These values are defined in PAPR correctly as 0x05 and 0x06. This inconsistency has gone unnoticed as neither enum is currently used. The possible future support of PING messages between the VIOS and client adapter relies on VIOSRP_INLINE_FORMAT crq messages. Corrected these enum values to match PAPR definitions. Signed-off-by:
-
Suganath prabu Subramani authored
mpt3sas: Remove cpumask_clear for zalloc_cpumask_var and don't free free_cpu_mask_var before reply_q Removed cpumask_clear as it is not required for zalloc_cpumask_var and free free_cpumask_var before freeing reply_q. Signed-off-by:
Suganath prabu Subramani <suganath-prabu.subramani@broadcom.com> Signed-off-by:
-
Johannes Thumshirn authored
Several functions in lpfc have comments stating that the function must be called with the hbalock (or hostlock, or ringlock) held. Add lockdep_assert_held() annotations to these functions, so one can actually verify the locks are held. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
-
Denys Vlasenko authored
__bfa_trc() compiles to 115 bytes of machine code. With this .config: http://busybox.net/~vda/kernel_config there are 1494 calls of __bfa_trc(). __bfa_trc32() is very similar, so it is uninlined too. However, it appears to be unused, therefore this patch ifdefs it out. Change in code size is about 130,000 bytes: text data bss dec hex filename 85975426 22294712 20627456 128897594 7aed23a vmlinux.before 85842882 22294584 20627456 128764922 7accbfa vmlinux [mkp: Removed unused __bfa_trc32()] Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> Acked-by:
Anil Gurumurthy <anil.gurumurthy@qlogic.com> CC: Fabian Frederick <fabf@skynet.be> CC: Anil Gurumurthy <anil.gurumurthy@qlogic.com> CC: Christoph Hellwig <hch@lst.de> CC: Guenter Roeck <linux@roeck-us.net> CC: Ben Hutchings <ben@decadent.org.uk> CC: James Bottomley <JBottomley@Parallels.com> CC: linux-kernel@vger.kernel.org CC: linux-scsi@vger.kernel.org Signed-off-by:
-
Sudip Mukherjee authored
Modify ppa driver to use the new parallel port device model. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Reviewed-by:
-
Sudip Mukherjee authored
We are getting build warning about: "Section mismatch in reference from the variable sim710_eisa_driver to the function .init.text:sim710_eisa_probe() The variable sim710_eisa_driver references the function __init sim710_eisa_probe()" sim710_eisa_probe() was having __init but that was being referenced from sim710_eisa_driver. Signed-off-by:
-
Maurizio Lombardi authored
In case of error, the memory allocated for phwi_ctrlr was not freed. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Reviewed-by:
Jitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by:
-
Tomas Winkler authored
[mkp: Only one typo remained] Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
QUERY_DESC_GEOMETRY_MAZ_SIZE QUERY_DESC_GEOMETRY_MAX_SIZE Signed-off-by:
-
Yaniv Gardi authored
Sometimes queries from the device might return a failure so it is recommended to retry sending the query, before giving up. This change adds a wrapper to retry sending a query attribute, in cases where we need to wait longer, before we continue, or before reporting a failure. Reviewed-by:
Gilad Broner <gbroner@codeaurora.org> Reviewed-by:
Dolev Raviv <draviv@codeaurora.org> Signed-off-by:
Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by:
-
Yaniv Gardi authored
Add a write memory barrier to make sure descriptors prepared are actually written to memory before ringing the doorbell. We have also added the write memory barrier after ringing the doorbell register so that controller sees the new request immediately. Reviewed-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
-
Yaniv Gardi authored
Performing several writes to UFS host controller registers has no guarantee of ordering, so we must make sure register writes to setup request list base address etc. are performed before the run/stop register is enabled. In addition, when setting up a task request, we must make sure the updating of descriptors takes places before ringing the doorbell, similarly to setting up a transfer request. Reviewed-by:
-
Yaniv Gardi authored
DME commands such as Hibern8 enter/exit and gear switch generate 2 completion interrupts, one for confirmation that command is received by local UniPro and 2nd one is the final confirmation after communication with remote UniPro. Currently both of these completions are registered as interrupt events which is not quite necessary and instead we can just wait for the interrupt of 2nd completion, this should reduce the number of interrupts and could reduce the unnecessary CPU wakeups to handle extra interrupts. Reviewed-by:
-
Yaniv Gardi authored
UFS flag query requests may fail sometimes due to timeouts etc. Add a wrapper function to retry up to 10 times in case of such failure, similar to retries being made for attribute queries. Reviewed-by:
-
Yaniv Gardi authored
Hibern8 exit can be called from 3 different contexts: - ufshcd_hibern8_exit_work - ufshcd_ungate_work - runtime/system resume If hibern8 exit fails for some reason then we try to bring the link to active state by link startup but this recovery mechanism results into deadlock or errors from first 2 context listed above. This change fixes the recovery by adding proper error handling mechanism. Reviewed-by: -
Yaniv Gardi authored
If hibern8 enter command fails then UFS link state may be unknown which may result into timeout of all the commands issued after failure. This change does 2 things (for pre-defined number of retry counts) after hibern8 enter failure: 1. Recovers the UFS link to active state 2. If link is recovered to active state, tries to put the UFS link in hibern8 enter again until retry count expires. Reviewed-by:
-
Yaniv Gardi authored
The dme_peer get/set attribute commands are prone to errors, therefore we add three retries for the UIC command sending. Error code returned from ufshcd_send_uic_cmd() is checked, and unless it was successful or the retries have finished, another command will be sent. Reviewed-by:
Lee Susman <lsusman@codeaurora.org> Signed-off-by:
-
Yaniv Gardi authored
If device raises the exception event in the response to the commands sent during the runtime/system PM callbacks, exception event handler might run in parallel with PM callbacks and may see unclocked register accesses. This change fixes this issue by not scheduling the exception event handler while PM callbacks are running. Reviewed-by:
-
Yaniv Gardi authored
fDeviceInit query response time for some devices is too long that default query request timeout of 100ms may not be enough. Experiments show that fDeviceInit response sometimes takes 500ms so to be on safer side this change sets the timeout to 600ms. Without this change, we might unnecessarily have to retry fDeviceInit query requests multiple times and each query request timeout prints one error message. Reviewed-by:
-
Yaniv Gardi authored
When sending a query to the device returns with a timeout error, we clear the corresponding bit in the DOORBELL register but we don't clear the outstanding_request field as we should. This patch fixes this bug. Reviewed-by:
-
Yaniv Gardi authored
A race condition appear to exist between request completion when scsi_done() is called to end the request and set the tag back to -1 (at blk_queue_end_tag() scsi_end_request), and scsi layer error handling which aborts the command and reuses it to request sense data. Sending the request sense is done with tag which was set to -1 and so it is invalid. Assert command tag passed from scsi layer is valid. Reviewed-by:
-
Yaniv Gardi authored
Some of the data structures (like response UPIU) and/or its elements (unused fields) should be cleared before sending out the respective command to UFS device. This change clears the UPIU response data structure for query commands and NOP command before sending out the command. We also initialize the PRDT table length to zero which should take care of commands which doesn't have any data associated with it. We are also clearing the unused fields in request UPIU for NOP command. Reviewed-by:
-
Yaniv Gardi authored
Clear the UFS data structures before sending new request. The SCSI command is sent to the device within the UFS UPIU request. As part of the transfer UPIU preparation, the SCSI command is copied to the UPIU structure according to the SCSI command size. As different SCSI commands differ in size from each other, we need to clear the whole SCSI command field to prevent sending uninitialized data to the device. The UPIU response doesn't always include the sense data and can differ in size. Hence, the UPIU response should also be cleared before the transfer. Reviewed-by:
Maya Erez <merez@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
When the scsi_dh core was moved into the scsi core module, CONFIG_SCSI_DH became a 'bool' option, and now anything depending on it can be built-in even when CONFIG_SCSI=m. This of course cannot link successfully: drivers/scsi/built-in.o: In function `rdac_init': scsi_dh_alua.c:(.init.text+0x14): undefined reference to `scsi_register_device_handler' scsi_dh_alua.c:(.init.text+0x64): undefined reference to `scsi_unregister_device_handler' drivers/scsi/built-in.o: In function `alua_init': scsi_dh_alua.c:(.init.text+0xb0): undefined reference to `scsi_register_device_handler' As a workaround, this adds an extra dependency on CONFIG_SCSI, so Kconfig can figure out whether built-in is allowed or not. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 086b91d0 ("scsi_dh: integrate into the core SCSI code") Signed-off-by:
-
Arnd Bergmann authored
Gcc incorrectly detects that two variables in aha1542_queuecommand might be used without an initialization: scsi/aha1542.c: In function 'aha1542_queuecommand': scsi/aha1542.c:382:16: error: 'cptr' may be used uninitialized in this function [-Werror=maybe-uninitialized] scsi/aha1542.c:379:11: error: 'sg_count' may be used uninitialized in this function [-Werror=maybe-uninitialized] The only user of these is doing the same check that the assigment has, so it is actually guaranteed to work. Adding an "else" clause with a fake initialization shuts up the warning. Signed-off-by:
-
Arnd Bergmann authored
The qla4_83xx_rd_reg_indirect() function can fail when it is unable to read a register, but not all callers check its return value before using the register data, and gcc correctly warns about this: qla4xxx/ql4_83xx.c: In function 'qla4_83xx_process_reset_template': qla4xxx/ql4_83xx.c:1073:36: warning: 'value' may be used uninitialized in this function ha->reset_tmplt.array[index++] = value; ^ qla4xxx/ql4_83xx.c:1050:11: note: 'value' was declared here uint32_t value; ^ qla4xxx/ql4_83xx.c:902:8: warning: 'value' may be used uninitialized in this function value &= p_rmw_hdr->test_mask; ^ qla4xxx/ql4_83xx.c:895:11: note: 'value' was declared here uint32_t value; ^ In file included from ../include/linux/io.h:25:0, from ../include/linux/pci.h:31, from ../drivers/scsi/qla4xxx/ql4_def.h:16, from ../drivers/scsi/qla4xxx/ql4_83xx.c:10: asm/io.h:101:2: warning: 'value' may be used uninitialized in this function asm volatile("str %1, %0" ^ qla4xxx/ql4_83xx.c:874:11: note: 'value' was declared here uint32_t value; ^ Unfortunately, I don't see any helpful way to add proper error handling for this case, and the failure scenario for rd_reg seems rather obscure, so this bails out and makes the rd_reg accessor set the result to 0xffffffff so we at least get a predictable value. Signed-off-by:Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by:
-
Arnd Bergmann authored
We get a warning for the fas216 driver when it is compiled as a loadable module, as the __setup() functions are never called then: scsi/arm/fas216.c:101:19: warning: 'fas216_log_setup' defined but not used [-Wunused-function] static int __init fas216_log_setup(char *str) This adds an #ifndef MODULE around the definition to shut up the warning and clarify for the reader when it is used or not. Signed-off-by:
-
Arnd Bergmann authored
The calc_sync_xfer function is only used if CONFIG_SCSI_ACORNSCSI_SYNC is set, otherwise we get a compiler warning: scsi/arm/acornscsi.c:680:15: warning: 'calc_sync_xfer' defined but not used [-Wunused-function] unsigned char calc_sync_xfer(unsigned int period, unsigned int offset) This marks the function as __maybe_unused to shut up the warning and silently drop the function in the object code when there is no caller. Signed-off-by:
-
Arnd Bergmann authored
The seq_mpt_print_ioc_summary function is used for the /proc/mpt/iocN/summary implementation and never gets called when CONFIG_PROC_FS is disabled: drivers/message/fusion/mptbase.c:6851:13: warning: 'seq_mpt_print_ioc_summary' defined but not used [-Wunused-function] static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan) This adds an #ifdef to hide the function definition in that case and avoid the warning. Signed-off-by:
-
