into nuts.ninka.net:/home/davem/src/BK/net-2.5

into nuts.ninka.net:/home/davem/src/BK/net-2.5

Contributed by VIA, via Jean Tourrilhes.

ir260_tekram-sir.diff :
~~~~~~~~~~~~~~~~~~~~~
		<Patch from Martin Diehl>
	o [CORRECT] Update tekram-sir dongle driver to common power-settling

ir260_usb_probe-4.diff :
~~~~~~~~~~~~~~~~~~~~~~
		<Patch from Oliver Neukum and Daniele Bellucci>
	o [CORRECT] minor fix to the probe failure path of irda-usb.

ir260_lap_retry_count.diff :
~~~~~~~~~~~~~~~~~~~~~~~~~~
	o [CORRECT] add interoperability workaround for 2.4.X IrDA stacks

ir260_donau_cleanup.diff :
~~~~~~~~~~~~~~~~~~~~~~~~
		<Patch from Christian Gennerat>
	o [CORRECT] Disable chip probing that fail too often
	o [FEATURE] Cleanup STATIC

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

into kroah.com:/home/greg/linux/BK/pci-2.6

Bug #1 (found by Jay Estabrook).
On Alpha, under certain circumstances the firmware may close the IO
window of PCI-to-PCI bridge even if there is IO behind.
This wouldn't be a problem - linux PCI setup code does set up this
window properly, but in addition the firmware clears the IO-enable
bit in the PCI_COMMAND register of the bridge.
Since we don't call pci_enable_* routines for bridges in non-hotplug
path, we end up with disabled IO. Fixed by adding pci_enable_bridges()
to pci_assign_unassigned_resources().
Architectures which don't use the latter, but do use other setup-bus
code (parisc?) also should call pci_enable_bridges() for each root bus.

Bug #2 (closely related to #1).
As it turns out, pci_enable_device() doesn't work for bridges at all,
only for regular devices (header type 0) due to 0x3f mask passed to
pci_enable_device_bars(). The mask should be (1 << PCI_NUM_RESOURCES) - 1.

Bug #3 (quite a few archs, including i386).
pcibios_enable_device() does only check first 6 resources (regardless
of the mask) to decide whether or not to enable IO and MEM.
Bridge resources start at 7.

#2 and #3 affect hotplug. I wonder, has anybody ever tried *bridged*
PCI card behind a hot-plug controller?

into kroah.com:/home/greg/linux/BK/gregkh-2.6

  This patch adds another P4B motherboard subsystem identifier to the recent
asus sensor patch for the 2.6 kernel.

This patch adds support for ID TECH's IDT1221U USB to RS-232 adapter
(intended for use and/or supplied with some of their magnetic/smart
card readers).  The VID and PID were provided by Steve Briggs on
the ftdi-usb-sio-devel list.

On Wed, Aug 06, 2003 at 04:22:44PM -0700, Greg KH wrote:
> On Wed, Aug 06, 2003 at 09:11:45PM +0200, Wiktor Wodecki wrote:
> > Hello folks,
> >
> > I just saw that I2C provides "/sys/bus/i2c/drivers/dev\ driver" in
> > 2.6.0-test2. It would be nice if you'd consider renaming this to
> > dev_driver, to avoid un-neccessary quoting in scripts.
> >
> > Thank You :-)
>
> Patches are always gladly accepted :)

here you go

There was no release function for the objects.
bad greg, no biscuit...

This is because the name field of struct device is going away, and the name
fields on these i2c structures are useful for people.

into home.osdl.org:/home/torvalds/v2.5/linux

This is a port of some smp fixes I did for 2.4 floppy.c

Andrew did the re-diffing.

This removes some function stubs from 6 watchdog drivers.

The VFS already returns -EINVAL in cases where fop->read == NULL, so
there's no need to duplicate the code 6 times.  This patch removes the
stubs and is compile tested.

From Matt Tolentino:

  Here's a small patch to change several data types from u64 to
  unsigned long in efi.h.  These changes enable the use of the
  same data structures and function prototypes for ia32 EFI kernels.

This applies on top of Takayoshi's interrupt polarity fix and just
makes things a tiny bit more consistent.

Is acpi_irq_to_vector() even needed anymore?  I don't see any
references to it.

The patch below removes the .weak symbol stuff from iosapic.c.

As far as I can tell, iosapic.c is compiled for every flavor except
the simulator.  I tried to boot the HP_SIM kernel on ski, but it
seems to loop in find_save_locs().  This happens both with and
without this patch, so maybe I have a local problem.  (I started
with a clean tree, did make

As in_atomic() uses kernel_locked() which is in smp_lock.h.

sn2 still doesn't use ACPI to describe PCI busses on the system (I'm
working on it), so we have to do it the old fashioned way.  This patch
also includes a few other fixes.

The attached patch (against 2.6) helps IA-32 applications take advantage of the
generic 32 bit (fs/compat_ioctl.c) ioctl handlers.

The patch was created by Matt Helsley <matthltc at us.ibm.com> for 2.4 and
has been changed slightly to match 2.6.

The implementation compromises performance for correctness.

This patch makes the kernel consider extension header length in a dst.

This patch fixes zero-clear in ah6_input.
If calling pskb_expand_head, the kernel clears wrong memory.

- ip6_tunnel must give its own getfrag function to ip6_append_data()
- fix dst leakage when encapsulated packet too bit

Add include to fix compilation on x86-64

into home.osdl.org:/home/torvalds/v2.5/linux