- 19 Aug, 2013 37 commits
-
-
Daniel Vetter authored
The idr is protected with our spinlock, if we don't hold that nothing prevents the gem objects from disappearing from under us. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Daniel Vetter authored
We might as well have a real ioctl function which checks for the callbacks. This seems to be a remnant from back in the days when each drm driver had their own complete ioctl table, with no shared core drm table at all. To make really sure no mis-guided user in a kms driver pops up again explicitly check for that in the new ioctl implementation. v2: Drop the unused variable I've accidentally left in the code, spotted by David Herrmann. Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
Daniel Vetter authored
I've forgotten this and shuffling all the little pieces into the respective patches is rather cumbersome ... Signed-off-by:
-
Daniel Vetter authored
The new arch_phys_wc_add/del functions do the right thing both with and without MTRR support in the kernel. So we can drop these additional checks. David Herrmann suggest to also kill the DRIVER_USE_MTRR flag since it's now unused, which spurred me to do a bit a better audit of the affected drivers. David helped a lot in that. Quoting our mail discussion: On Wed, Jul 10, 2013 at 5:41 PM, David Herrmann <dh.herrmann@gmail.com> wrote: > On Wed, Jul 10, 2013 at 5:22 PM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote: >> On Wed, Jul 10, 2013 at 3:51 PM, David Herrmann <dh.herrmann@gmail.com> wrote: >>>> -#if __OS_HAS_MTRR >>>> -static inline int drm_core_has_MTRR(struct drm_device *dev) >>>> -{ >>>> - return drm_core_check_feature(dev, DRIVER_USE_MTRR); >>>> -} >>>> -#else >>>> -#define drm_core_has_MTRR(dev) (0) >>>> -#endif >>>> - >>> >>> That was the last user of DRIVER_USE_MTRR (apart from drivers setting >>> it in .driver_features). Any reason to keep it around? >> >> Yeah, I guess we could rip things out. Which will also force me to >> properly audit drivers for the eventual behaviour change this could >> entail (in case there's an x86 driver which did not ask for an mtrr, >> but iirc there isn't). > > david@david-mb ~/dev/kernel/linux $ for i in drivers/gpu/drm/* ; do if > test -d "$i" ; then if ! grep -q USE_MTRR -r $i ; then echo $i ; fi ; > fi ; done > drivers/gpu/drm/exynos > drivers/gpu/drm/gma500 > drivers/gpu/drm/i2c > drivers/gpu/drm/nouveau > drivers/gpu/drm/omapdrm > drivers/gpu/drm/qxl > drivers/gpu/drm/rcar-du > drivers/gpu/drm/shmobile > drivers/gpu/drm/tilcdc > drivers/gpu/drm/ttm > drivers/gpu/drm/udl > drivers/gpu/drm/vmwgfx > david@david-mb ~/dev/kernel/linux $ > > So for x86 gma500,nouveau,qxl,udl,vmwgfx don't set DRIVER_USE_MTRR. > But I cannot tell whether they break if we call arch_phys_wc_add/del, > anyway. At least nouveau seemed to work here, but it doesn't use AGP > or drm_bufs, I guess. Cool, thanks a lot for stitching together the list of drivers to look at. So for real KMS drivers it's the drives responsibility to add an mtrr if it needs one. nouvea, radeon, mgag200, i915 and vmwgfx do that already. Somehow the savage driver also ends up doing that, I have no idea why. Note that gma500 as a pure KMS driver doesn't need MTRR setup since the platforms that it supports all support PAT. So no MTRRs needed to get wc iomappings. The mtrr support in the drm core is all for legacy mappings of garts, framebuffers and registers. All legacy drivers set the USE_MTRR flag, so we're good there. All in all I think we can really just ditch this /endquote v2: Also kill DRIVER_USE_MTRR as suggested by David Herrmann v3: Rebase on top of David Herrmann's agp setup/cleanup changes. Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by:Andy Lutomirski <luto@amacapital.net> Reviewed-by:
-
Daniel Vetter authored
Trying to drop a reference we don't have is a pretty serious bug. Trying to paper over it is an even worse offense. So scream into dmesg with a big WARN in case that ever happens. Signed-off-by:
-
Daniel Vetter authored
Calling this function with a NULL object is simply a bug, so papering over a NULL object not a good idea. Signed-off-by:
-
Daniel Vetter authored
We have three callers of this function now and it's neither performance critical nor really small. So an inline function feels like overkill and unecessarily separates the different parts of the code. Since all callers of drm_gem_object_handle_free are now in drm_gem.c we can make that static (and remove the unused EXPORT_SYMBOL). To avoid a forward declaration move it (and drm_gem_object_free_bug) up a bit. Signed-off-by:
-
Daniel Vetter authored
Lifetime rules seem to be solid around ->import_attach. So this patch just properly documents them. Note that pointing directly at the attachment might have issues for devices that have multiple struct device *dev parts constituting the logical gpu and so might need multiple attachment points. Similarly for drm devices which don't need a dma attachment at all (like udl). But fixing that up is material for different patches. Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Daniel Vetter authored
I've checked both implementations (radeon/nouveau) and they both grab the page array from ttm simply by dereferencing it and then wrapping it up with drm_prime_pages_to_sg in the callback and map it with dma_map_sg (in the helper). Only the grabbing of the underlying page array is anything we need to be concerned about, and either those pages are pinned independently, or we're screwed no matter what. And indeed, nouveau/radeon pin the backing storage in their attach/detach functions. Since I've created this patch cma prime support for dma_buf was added. drm_gem_cma_prime_get_sg_table only calls kzalloc and the creates&maps the sg table with dma_get_sgtable. It doesn't touch any gem object state otherwise. So the cma helpers also look safe. The only thing we might claim it does is prevent concurrent mapping of dma_buf attachments. But a) that's not allowed and b) the current code is racy already since it checks whether the sg mapping exists _before_ grabbing the lock. So the dev->struct_mutex locking here does absolutely nothing useful, but only distracts. Remove it. This should also help Maarten's work to eventually pin the backing storage more dynamically by preventing locking inversions around dev->struct_mutex. v2: Add analysis for recently added cma helper prime code. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by:
-
Inki Dae authored
Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Daniel Vetter authored
Note that this is slightly tricky since both drivers store their native objects in dma_buf->priv. But both also embed the base drm_gem_object at the first position, so the implicit cast is ok. To use the release helper we need to export it, too. Cc: Inki Dae <inki.dae@samsung.com> Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org> Signed-off-by:
-
David Herrmann authored
VMA offsets are 64bit so do not cast them to "unsigned int". Also remove the (now useless) offset-retrieval helper. The VMA manager provides simple enough helpers. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: "Terje Bergström" <tbergstrom@nvidia.com> Cc: Arto Merilainen <amerilainen@nvidia.com> Signed-off-by:
-
Ilia Mirkin authored
This makes it so that reloading a module does not cause all the connector ids to change, which are user-visible and sometimes used for configuration. Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
Rob Clark authored
Basically just extracting some code duplicated in gma500, omapdrm, udl, and upcoming msm driver. Signed-off-by:
-
Rob Clark authored
Variant of drm_gem_create_mmap_offset() which doesn't make the assumption that virtual size and physical size (obj->size) are the same. This is needed in omapdrm to deal with tiled buffers. And lets us get rid of a duplicated and slightly modified version of drm_gem_create_mmap_offset() in omapdrm. Signed-off-by:
-
Rob Clark authored
And simplify how we hold a ref+pin to what is being scanned out by using fb refcnt'ing. The previous logic pre-dated fb refcnt, and as a result was less straightforward than it could have been. By holding a ref to the fb, we don't have to care about how many plane's there are and holding a ref to each color plane's bo. Signed-off-by:
-
Rob Clark authored
Signed-off-by:
Darren Etheridge <detheridge@ti.com> Signed-off-by:
-
Rob Clark authored
A small helper to queue up work to do, from workqueue context, after a flip. Typically useful to defer unreffing buffers that may be read by the display controller until vblank. v1: original v2: wire up docbook + couple docbook fixes Signed-off-by:
-
Stéphane Marchesin authored
This function is unused. Signed-off-by:
Stéphane Marchesin <marcheu@chromium.org> Reviewed-by:
-
Daniel Vetter authored
Again only used by a tests in libdrm and by dristat. Nowadays we have much better tracing tools to get detailed insights into what a drm driver is doing. And for a simple "does it work" kind of question that these stats could answer we have plenty of dmesg debug log spew. So I don't see any use for this stat gathering complexity at all. To be able to gradually drop things start with ripping out the interfaces to it, here the ioctl. To prevent dristat from eating its own stack garbage we can't use the drm_noop ioctl though, since we need to clear the return data with a memset. Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Daniel Vetter authored
We not only have debugfs files to do pretty much the equivalent of lsof, we also have an ioctl. Not that compared to lsof this dumps a wee bit more information, but we can still get at that from debugfs easily. I've dug around in mesa, libdrm and ddx histories and the only users seem to be drm/tests/dristat.c and drm/tests/getclients.c. The later is a testcase for the ioctl itself since up to commit b018fcda Author: Eric Anholt <eric@anholt.net> Date: Thu Nov 22 18:46:54 2007 +1000 drm: Make DRM_IOCTL_GET_CLIENT return EINVAL when it can't find client #idx there was actually no way at all for userspace to enumerate all clients since the kernel just wouldn't tell it when to stop. Which completely broke it's only user, dristat -c. So obviously that ioctl wasn't much use for debugging. Hence I don't see any point in keeping support for a tool which was pretty obviously never really used, and while we have good replacements in the form of equivalent debugfs files. Still, to keep dristat -c from looping forever again stop it early by returning an unconditional -EINVAL. Also add a comment in the code about why. v2: Slightly less hollowed-out implementation. libva uses GET_CLIENTS to figure out whether the fd it has is already authenticated or not. So we need to keep that part of things working. Simplest way is to just return one entry to keep va_drm_is_authenticated in libva/va/drm/va_drm_auth.c working. This is exercised by igt/drm_get_client_auth which contains a copypasta of the libva auth check code. Cc: Gwenole Beauchesne <gwenole.beauchesne@intel.com> Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
-
Daniel Vetter authored
They're only used by the agpgart support code in drm_agpgart.c, not by any drivers. I think long-term we should create a drm_internal.h include file with all the various functions only used by the drm core and not exported to drivers, and remove them from drmP.h. Oh, and someone should kill that upper-case P sometimes ;-) But that's all stuff for future patch bombs. Signed-off-by:
-
Daniel Vetter authored
Signed-off-by:
-
Daniel Vetter authored
The gma500 driver somehow set the DRIVER_IRQ_VBL flag, but since there's no code at all to check for this we can kill it. The other two are completely unused. Signed-off-by:
-
Daniel Vetter authored
No driver ever sets that flag, so good riddance! Signed-off-by:
-
Daniel Vetter authored
So I've stumbled over drm_fasync and wondered what it does. Digging that up is quite a story. First I've had to read up on what this does and ended up being rather bewildered why peopled loved signals so much back in the days that they've created SIGIO just for that ... Then I wondered how this ever works, and what that strange "No-op." comment right above it should mean. After all calling the core fasync helper is pretty obviously not a noop. After reading through the kernels FASYNC implementation I've noticed that signals are only sent out to the processes attached with FASYNC by calling kill_fasync. No merged drm driver has ever done that. After more digging I've found out that the only driver that ever used this is the so called GAMMA driver. I've frankly never heard of such a gpu brand ever before. Now FASYNC seems to not have been the only bad thing with that driver, since Dave Airlie removed it from the drm driver with prejudice: commit 1430163b4bbf7b00367ea1066c1c5fe85dbeefed Author: Dave Airlie <airlied@linux.ie> Date: Sun Aug 29 12:04:35 2004 +0000 Drop GAMMA DRM from a great height ... Long story short, the drm fasync support seems to be doing absolutely nothing. And the only user of it was never merged into the upstream kernel. And we don't need any fops->fasync callback since the fcntl implementation in the kernel already implements the noop case correctly. So stop this particular cargo-cult and rip it all out. v2: Kill drm_fasync assignments in rcar (newly added) and imx drivers (somehow I've missed that one in staging). Also drop the reference in the drm DocBook. ARM compile-fail reported by Rob Clark. v3: Move the removal of dev->buf_asnyc assignment in drm_setup to this patch here. v4: Actually git add ... tsk. Cc: Dave Airlie <airlied@linux.ie> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Clark <robdclark@gmail.com> Acked-by: -
Daniel Vetter authored
It's kzalloced ... Signed-off-by:
-
Daniel Vetter authored
So after a lot of digging around in git histories it looks like this has only ever be used by dri1 render clients. Hence we can fully disable the entire thing for modesetting drivers and so greatly reduce the attack surface for potential exploits (or at least tools like trinity ...). Also add the drm_legacy prefix for functions which are called from common code. To further reduce the impact on common code also extract all the ctx release handling into a function (instead of only releasing individual handles) and make ctxbitmap_cleanup return void - it can never fail. Reviewed-by:
-
Daniel Vetter authored
Now only legacy ums drivers have the DRIVER_HAVE_DMA driver feature flag set, so strictly speaking the modesetting check is redundant. But adding it has the upside that it makes it very clear that the dma support is legacy stuff. Reviewed-by:
-
Daniel Vetter authored
And hide the checks a bit better. This was already disallowed for modesetting drivers, so no functinal change here. Reviewed-by:
-
Daniel Vetter authored
Only the radeon/r128/ati ums drivers use this. Furthermore the cleanup was already only done for UMS drivers. Also a quick check of the ATI ddx git history shows that only the UMS code ever used this facility. So we can safely disallow these pair of ioctls for modesetting drivers. Reviewed-by:
-
Daniel Vetter authored
I've decided that some clear markers for what's legacy dri1/non-gem code is useful. I've opted to use the drm_legacy prefix and then hide all the checks in that function for better readability in the common code. Reviewed-by:
-
Daniel Vetter authored
Totally unused, so just rip it out. Anyway, we want drivers to be fully backwards compatible, allowing them to change behaviour is just a recipe for them to break badly. Reviewed-by:
-
Daniel Vetter authored
Again, it does nothing. Signed-off-by:
-
- 18 Aug, 2013 3 commits
-
-
Daniel Vetter authored
KMS drivers really shouldn't need to do anything on firstopen, so kill empty callbacks. Signed-off-by:
-
Maarten Lankhorst authored
Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
David Herrmann authored
This field is never read. No need to set it in radeon. Besides, DRM gem core clears it during setup, anyway. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
