- 15 Jul, 2018 12 commits
-
-
Vincent Guittot authored
The time spent executing IRQ handlers can be significant but it is not reflected in the utilization of CPU when deciding to choose an OPP. Now that we have access to this metric, schedutil can take it into account when selecting the OPP for a CPU. RQS utilization don't see the time spend under interrupt context and report their value in the normal context time window. We need to compensate this when adding interrupt utilization The CPU utilization is: IRQ util_avg + (1 - IRQ util_avg / max capacity ) * /Sum rq util_avg A test with iperf on hikey (octo arm64) gives the following speedup: iperf -c server_address -r -t 5 w/o patch w/ patch Tx 276 Mbits/sec 304 Mbits/sec +10% Rx 299 Mbits/sec 328 Mbits/sec +9% 8 iterations stdev is lower than 1% Only WFI idle state is enabled (shallowest idle state). Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Link: http://lkml.kernel.org/r/1530200714-4504-8-git-send-email-vincent.guittot@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Vincent Guittot authored
interrupt and steal time are the only remaining activities tracked by rt_avg. Like for sched classes, we can use PELT to track their average utilization of the CPU. But unlike sched class, we don't track when entering/leaving interrupt; Instead, we take into account the time spent under interrupt context when we update rqs' clock (rq_clock_task). This also means that we have to decay the normal context time and account for interrupt time during the update. That's also important to note that because: rq_clock == rq_clock_task + interrupt time and rq_clock_task is used by a sched class to compute its utilization, the util_avg of a sched class only reflects the utilization of the time spent in normal context and not of the whole time of the CPU. The utilization of interrupt gives an more accurate level of utilization of CPU. The CPU utilization is: avg_irq + (1 - avg_irq / max capacity) * /Sum avg_rq Most of the time, avg_irq is small and neglictible so the use of the approximation CPU utilization = /Sum avg_rq was enough. Signed-off-by:
-
Vincent Guittot authored
Now that we have both the DL class bandwidth requirement and the DL class utilization, we can detect when CPU is fully used so we should run at max. Otherwise, we keep using the DL bandwidth requirement to define the utilization of the CPU. Signed-off-by:
-
Vincent Guittot authored
Similarly to what happens with RT tasks, CFS tasks can be preempted by DL tasks and the CFS's utilization might no longer describes the real utilization level. Current DL bandwidth reflects the requirements to meet deadline when tasks are enqueued but not the current utilization of the DL sched class. We track DL class utilization to estimate the system utilization. Signed-off-by:
-
Vincent Guittot authored
Add both CFS and RT utilization when selecting an OPP for CFS tasks as RT can preempt and steal CFS's running time. RT util_avg is used to take into account the utilization of RT tasks on the CPU when selecting OPP. If a RT task migrate, the RT utilization will not migrate but will decay over time. On an overloaded CPU, CFS utilization reflects the remaining utilization avialable on CPU. When RT task migrates, the CFS utilization will increase when tasks will start to use the newly available capacity. At the same pace, RT utilization will decay and both variations will compensate each other to keep unchanged overall utilization and will prevent any OPP drop. Signed-off-by:
-
Vincent Guittot authored
schedutil governor relies on cfs_rq's util_avg to choose the OPP when CFS tasks are running. When the CPU is overloaded by CFS and RT tasks, CFS tasks are preempted by RT tasks and in this case util_avg reflects the remaining capacity but not what CFS want to use. In such case, schedutil can select a lower OPP whereas the CPU is overloaded. In order to have a more accurate view of the utilization of the CPU, we track the utilization of RT tasks. Only util_avg is correctly tracked but not load_avg and runnable_load_avg which are useless for rt_rq. rt_rq uses rq_clock_task and cfs_rq uses cfs_rq_clock_task but they are the same at the root group level, so the PELT windows of the util_sum are aligned. Signed-off-by:
-
Vincent Guittot authored
We want to track rt_rq's utilization as a part of the estimation of the whole rq's utilization. This is necessary because rt tasks can steal utilization to cfs tasks and make them lighter than they are. As we want to use the same load tracking mecanism for both and prevent useless dependency between cfs and rt code, PELT code is moved in a dedicated file. Signed-off-by:
-
Quentin Perret authored
When a new task wakes-up for the first time, its initial utilization is set to half of the spare capacity of its CPU. The current implementation of post_init_entity_util_avg() uses SCHED_CAPACITY_SCALE directly as a capacity reference. As a result, on a big.LITTLE system, a new task waking up on an idle little CPU will be given ~512 of util_avg, even if the CPU's capacity is significantly less than that. Fix this by computing the spare capacity with arch_scale_cpu_capacity(). Signed-off-by:
Quentin Perret <quentin.perret@arm.com> Signed-off-by:
-
Peter Zijlstra authored
When scheduling is delayed for longer than the softlockup interrupt period it is possible to double-queue the cpu_stop_work, causing list corruption. Cure this by adding a completion to track the cpu_stop_work's progress. Reported-by:
kernel test robot <lkp@intel.com> Tested-by:
Rong Chen <rong.a.chen@intel.com> Signed-off-by:
-
Ingo Molnar authored
Signed-off-by: -
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: - A fix for OMAP5 and DRA7 to make the branch predictor hardening settings take proper effect on secondary cores - Disable USB OTG on am3517 since current driver isn't working - Fix thermal sensor register settings on Armada 38x - Fix suspend/resume IRQs on pxa3xx * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores ARM: pxa: irq: fix handling of ICMR registers in suspend/resume ARM: dts: armada-38x: use the new thermal binding
-
- 14 Jul, 2018 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC fixes from Alexandre Belloni: "Two fixes for 4.18: - an important core fix for RTCs using the core offsetting only one driver is affected - a fix for the error path of mrst" * tag 'rtc-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: fix alarm read and set offset rtc: mrst: fix error code in probe() -
Olof Johansson authored
Merge tag 'omap-for-v4.18/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Two omap fixes for v4.18-rc cycle Turns out the recent patches for ARM branch predictor hardening are not working on omap5 and dra7 as planned because the secondary CPU is parked to the bootrom code. We can't configure it in the bootloader. So we must enable invalidates of BTB for omap5 and dra7 secondary core in the kernel. And there's a fix for reserved register access for am3517. The usb otg module on am3517 is not the same as for other omap3. * tag 'omap-for-v4.18/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores Signed-off-by:
Olof Johansson <olof@lixom.net>
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu fixes for 4.18 (part 1) Use the new thermal binding on Armada 38x allowing to use a driver fix which is already part of the kernel. * tag 'mvebu-fixes-4.18-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-38x: use the new thermal binding Signed-off-by:
-
https://github.com/rjarzmik/linuxOlof Johansson authored
This is the fixes set for v4.18 cycle. This is a fix for suspending all pxa3xx platforms, where high number interrupts are not reenabled. * tag 'pxa-fixes-4.18' of https://github.com/rjarzmik/linux: ARM: pxa: irq: fix handling of ICMR registers in suspend/resume Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "Two related fixes for a boot failure of Xen PV guests" * tag 'for-linus-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: setup pv irq ops vector earlier xen: remove global bit from __default_kernel_pte_mask for pv guests
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Just a single regression fix (from 4.17) for bsg, fixing an EINVAL return on non-data commands" * tag 'for-linus-20180713' of git://git.kernel.dk/linux-block: bsg: fix bogus EINVAL on non-data commands
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "11 fixes" * emailed patches form Andrew Morton <akpm@linux-foundation.org>: reiserfs: fix buffer overflow with long warning messages checkpatch: fix duplicate invalid vsprintf pointer extension '%p<foo>' messages mm: do not bug_on on incorrect length in __mm_populate() mm/memblock.c: do not complain about top-down allocations for !MEMORY_HOTREMOVE fs, elf: make sure to page align bss in load_elf_library x86/purgatory: add missing FORCE to Makefile target net/9p/client.c: put refcount of trans_mod in error case in parse_opts() mm: allow arch to supply p??_free_tlb functions autofs: fix slab out of bounds read in getname_kernel() fs/proc/task_mmu.c: fix Locked field in /proc/pid/smaps* mm: do not drop unused pages when userfaultd is running
-
Eric Biggers authored
ReiserFS prepares log messages into a 1024-byte buffer with no bounds checks. Long messages, such as the "unknown mount option" warning when userspace passes a crafted mount options string, overflow this buffer. This causes KASAN to report a global-out-of-bounds write. Fix it by truncating messages to the buffer size. Link: http://lkml.kernel.org/r/20180707203621.30922-1-ebiggers3@gmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+b890b3335a4d8c608963@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
Multiline statements with invalid %p<foo> uses produce multiple warnings. Fix that. e.g.: $ cat t_block.c void foo(void) { MY_DEBUG(drv->foo, "%pk", foo->boo); } $ ./scripts/checkpatch.pl -f t_block.c WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 #1: FILE: t_block.c:1: +void foo(void) WARNING: Invalid vsprintf pointer extension '%pk' #3: FILE: t_block.c:3: + MY_DEBUG(drv->foo, + "%pk", + foo->boo); WARNING: Invalid vsprintf pointer extension '%pk' #3: FILE: t_block.c:3: + MY_DEBUG(drv->foo, + "%pk", + foo->boo); total: 0 errors, 3 warnings, 6 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. t_block.c has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Link: http://lkml.kernel.org/r/9e8341bbe4c9877d159cb512bb701043cbfbb10b.camel@perches.comSigned-off-by:Joe Perches <joe@perches.com> Cc: "Tobin C. Harding" <me@tobin.cc> Signed-off-by:
-
Michal Hocko authored
syzbot has noticed that a specially crafted library can easily hit VM_BUG_ON in __mm_populate kernel BUG at mm/gup.c:1242! invalid opcode: 0000 [#1] SMP CPU: 2 PID: 9667 Comm: a.out Not tainted 4.18.0-rc3 #644 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 RIP: 0010:__mm_populate+0x1e2/0x1f0 Code: 55 d0 65 48 33 14 25 28 00 00 00 89 d8 75 21 48 83 c4 20 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 75 18 f1 ff 0f 0b e8 6e 18 f1 ff <0f> 0b 31 db eb c9 e8 93 06 e0 ff 0f 1f 00 55 48 89 e5 53 48 89 fb Call Trace: vm_brk_flags+0xc3/0x100 vm_brk+0x1f/0x30 load_elf_library+0x281/0x2e0 __ia32_sys_uselib+0x170/0x1e0 do_fast_syscall_32+0xca/0x420 entry_SYSENTER_compat+0x70/0x7f The reason is that the length of the new brk is not page aligned when we try to populate the it. There is no reason to bug on that though. do_brk_flags already aligns the length properly so the mapping is expanded as it should. All we need is to tell mm_populate about it. Besides that there is absolutely no reason to to bug_on in the first place. The worst thing that could happen is that the last page wouldn't get populated and that is far from putting system into an inconsistent state. Fix the issue by moving the length sanitization code from do_brk_flags up to vm_brk_flags. The only other caller of do_brk_flags is brk syscall entry and it makes sure to provide the proper length so t here is no need for sanitation and so we can use do_brk_flags without it. Also remove the bogus BUG_ONs. [osalvador@techadventures.net: fix up vm_brk_flags s@request@len@] Link: http://lkml.kernel.org/r/20180706090217.GI32658@dhcp22.suse.czSigned-off-by:Michal Hocko <mhocko@suse.com> Reported-by:
syzbot <syzbot+5dcb560fe12aa5091c06@syzkaller.appspotmail.com> Tested-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michal Hocko authored
Mike Rapoport is converting architectures from bootmem to nobootmem allocator. While doing so for m68k Geert has noticed that he gets a scary looking warning: WARNING: CPU: 0 PID: 0 at mm/memblock.c:230 memblock_find_in_range_node+0x11c/0x1be memblock: bottom-up allocation failed, memory hotunplug may be affected Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.18.0-rc3-atari-01343-gf2fb5f2e09a97a3c-dirty #7 Call Trace: __warn+0xa8/0xc2 kernel_pg_dir+0x0/0x1000 netdev_lower_get_next+0x2/0x22 warn_slowpath_fmt+0x2e/0x36 memblock_find_in_range_node+0x11c/0x1be memblock_find_in_range_node+0x11c/0x1be memblock_find_in_range_node+0x0/0x1be vprintk_func+0x66/0x6e memblock_virt_alloc_internal+0xd0/0x156 netdev_lower_get_next+0x2/0x22 netdev_lower_get_next+0x2/0x22 kernel_pg_dir+0x0/0x1000 memblock_virt_alloc_try_nid_nopanic+0x58/0x7a netdev_lower_get_next+0x2/0x22 kernel_pg_dir+0x0/0x1000 kernel_pg_dir+0x0/0x1000 EXPTBL+0x234/0x400 EXPTBL+0x234/0x400 alloc_node_mem_map+0x4a/0x66 netdev_lower_get_next+0x2/0x22 free_area_init_node+0xe2/0x29e EXPTBL+0x234/0x400 paging_init+0x430/0x462 kernel_pg_dir+0x0/0x1000 printk+0x0/0x1a EXPTBL+0x234/0x400 setup_arch+0x1b8/0x22c start_kernel+0x4a/0x40a _sinittext+0x344/0x9e8 The warning is basically saying that a top-down allocation can break memory hotremove because memblock allocation is not movable. But m68k doesn't even support MEMORY_HOTREMOVE so there is no point to warn about it. Make the warning conditional only to configurations that care. Link: http://lkml.kernel.org/r/20180706061750.GH32658@dhcp22.suse.czSigned-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
-
Oscar Salvador authored
The current code does not make sure to page align bss before calling vm_brk(), and this can lead to a VM_BUG_ON() in __mm_populate() due to the requested lenght not being correctly aligned. Let us make sure to align it properly. Kees: only applicable to CONFIG_USELIB kernels: 32-bit and configured for libc5. Link: http://lkml.kernel.org/r/20180705145539.9627-1-osalvador@techadventures.netSigned-off-by:
Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Philipp Rudo authored
- Build the kernel without the fix - Add some flag to the purgatories KBUILD_CFLAGS,I used -fno-asynchronous-unwind-tables - Re-build the kernel When you look at makes output you see that sha256.o is not re-build in the last step. Also readelf -S still shows the .eh_frame section for sha256.o. With the fix sha256.o is rebuilt in the last step. Without FORCE make does not detect changes only made to the command line options. So object files might not be re-built even when they should be. Fix this by adding FORCE where it is missing. Link: http://lkml.kernel.org/r/20180704110044.29279-2-prudo@linux.ibm.com Fixes: df6f2801 ("kernel/kexec_file.c: move purgatories sha256 to common code") Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Acked-by:
Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> [4.17+] Signed-off-by:
-
piaojun authored
In my testing, the second mount will fail after umounting successfully. The reason is that we put refcount of trans_mod in the correct case rather than the error case in parse_opts() at last. That will cause the refcount decrease to -1, and when we try to get trans_mod again in try_module_get(), we could only increase refcount to 0 which will cause failure as follows: parse_opts v9fs_get_trans_by_name try_module_get : return NULL to caller which cause error So we should put refcount of trans_mod in error case. Link: http://lkml.kernel.org/r/5B3F39A0.2030509@huawei.com Fixes: 9421c3e6 ("net/9p/client.c: fix potential refcnt problem of trans module") Signed-off-by:Jun Piao <piaojun@huawei.com> Reviewed-by:
Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by:
Greg Kurz <groug@kaod.org> Reviewed-by:
Dominique Martinet <dominique.martinet@cea.fr> Tested-by:
-
Nicholas Piggin authored
The mmu_gather APIs keep track of the invalidated address range including the span covered by invalidated page table pages. Ranges covered by page tables but not ptes (and therefore no TLBs) still need to be invalidated because some architectures (x86) can cache intermediate page table entries, and invalidate those with normal TLB invalidation instructions to be almost-backward-compatible. Architectures which don't cache intermediate page table entries, or which invalidate these caches separately from TLB invalidation, do not require TLB invalidation range expanded over page tables. Allow architectures to supply their own p??_free_tlb functions, which can avoid the __tlb_adjust_range. Link: http://lkml.kernel.org/r/20180703013131.2807-1-npiggin@gmail.comSigned-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
-
Tomas Bortoli authored
The autofs subsystem does not check that the "path" parameter is present for all cases where it is required when it is passed in via the "param" struct. In particular it isn't checked for the AUTOFS_DEV_IOCTL_OPENMOUNT_CMD ioctl command. To solve it, modify validate_dev_ioctl(function to check that a path has been provided for ioctl commands that require it. Link: http://lkml.kernel.org/r/153060031527.26631.18306637892746301555.stgit@pluto.themaw.netSigned-off-by:
Tomas Bortoli <tomasbortoli@gmail.com> Signed-off-by:
Ian Kent <raven@themaw.net> Reported-by: syzbot+60c837b428dc84e83a93@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Vlastimil Babka authored
Thomas reports: "While looking around in /proc on my v4.14.52 system I noticed that all processes got a lot of "Locked" memory in /proc/*/smaps. A lot more memory than a regular user can usually lock with mlock(). Commit 493b0e9d (in v4.14-rc1) seems to have changed the behavior of "Locked". Before that commit the code was like this. Notice the VM_LOCKED check. (vma->vm_flags & VM_LOCKED) ? (unsigned long)(mss.pss >> (10 + PSS_SHIFT)) : 0); After that commit Locked is now the same as Pss: (unsigned long)(mss->pss >> (10 + PSS_SHIFT))); This looks like a mistake." Indeed, the commit has added mss->pss_locked with the correct value that depends on VM_LOCKED, but forgot to actually use it. Fix it. Link: http://lkml.kernel.org/r/ebf6c7fb-fec3-6a26-544f-710ed193c154@suse.cz Fixes: 493b0e9d ("mm: add /proc/pid/smaps_rollup") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Thomas Lindroth <thomas.lindroth@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Daniel Colascione <dancol@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Christian Borntraeger authored
KVM guests on s390 can notify the host of unused pages. This can result in pte_unused callbacks to be true for KVM guest memory. If a page is unused (checked with pte_unused) we might drop this page instead of paging it. This can have side-effects on userfaultd, when the page in question was already migrated: The next access of that page will trigger a fault and a user fault instead of faulting in a new and empty zero page. As QEMU does not expect a userfault on an already migrated page this migration will fail. The most straightforward solution is to ignore the pte_unused hint if a userfault context is active for this VMA. Link: http://lkml.kernel.org/r/20180703171854.63981-1-borntraeger@de.ibm.comSigned-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Pavel Tatashin authored
We must zero struct pages for memory that is not backed by physical memory, or kernel does not have access to. Recently, there was a change which zeroed all memmap for all holes in e820. Unfortunately, it introduced a bug that is discussed here: https://www.spinics.net/lists/linux-mm/msg156764.html Linus, also saw this bug on his machine, and confirmed that reverting commit 124049de ("x86/e820: put !E820_TYPE_RAM regions into memblock.reserved") fixes the issue. The problem is that we incorrectly zero some struct pages after they were setup. The fix is to zero unavailable struct pages prior to initializing of struct pages. A more detailed fix should come later that would avoid double zeroing cases: one in __init_single_page(), the other one in zero_resv_unavail(). Fixes: 124049de ("x86/e820: put !E820_TYPE_RAM regions into memblock.reserved") Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by:
-
- 13 Jul, 2018 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: - I2C core bugfix regarding bus recovery - driver bugfix for the tegra driver - typo correction * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: recovery: if possible send STOP with recovery pulses i2c: tegra: Fix NACK error handling i2c: stu300: use non-archaic spelling of failes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Ingo Molnar: "A clocksource driver fix and a revert" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: arm_arch_timer: Set arch_mem_timer cpumask to cpu_possible_mask Revert "tick: Prefer a lower rating device only if it's CPU local device"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tool fixes from Ingo Molnar: "Misc tooling fixes: python3 related fixes, gcc8 fix, bashism fixes and some other smaller fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Use python-config --includes rather than --cflags perf script python: Fix dict reference counting perf stat: Fix --interval_clear option perf tools: Fix compilation errors on gcc8 perf test shell: Prevent temporary editor files from being considered test scripts perf llvm-utils: Remove bashism from kernel include fetch script perf test shell: Make perf's inet_pton test more portable perf test shell: Replace '|&' with '2>&1 |' to work with more shells perf scripts python: Add Python 3 support to EventClass.py perf scripts python: Add Python 3 support to sched-migration.py perf scripts python: Add Python 3 support to Util.py perf scripts python: Add Python 3 support to SchedGui.py perf scripts python: Add Python 3 support to Core.py perf tools: Generate a Python script compatible with Python 2 and 3
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fix from Ingo Molnar: "Fix a UEFI mixed mode (64-bit kernel on 32-bit UEFI) reboot loop regression" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Fix mixed mode reboot loop by removing pointless call to PciIo->Attributes()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull rseq fixes from Ingo Molnar: "Various rseq ABI fixes and cleanups: use get_user()/put_user(), validate parameters and use proper uapi types, etc" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq/selftests: cleanup: Update comment above rseq_prepare_unload rseq: Remove unused types_32_64.h uapi header rseq: uapi: Declare rseq_cs field as union, update includes rseq: uapi: Update uapi comments rseq: Use get_user/put_user rather than __get_user/__put_user rseq: Use __u64 for rseq_cs fields, validate user inputs
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Things have been quite slow, only 6 RC patches have been sent to the list. Regression, user visible bugs, and crashing fixes: - cxgb4 could wrongly fail MR creation due to a typo - various crashes if the wrong QP type is mixed in with APIs that expect other types - syzkaller oops - using ERR_PTR and NULL together cases HFI1 to crash in some cases - mlx5 memory leak in error unwind" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Fix memory leak in mlx5_ib_create_srq() error path RDMA/uverbs: Don't fail in creation of multiple flows IB/hfi1: Fix incorrect mixing of ERR_PTR and NULL return values RDMA/uverbs: Fix slab-out-of-bounds in ib_uverbs_ex_create_flow RDMA/uverbs: Protect from attempts to create flows on unsupported QP iw_cxgb4: correctly enforce the max reg_mr depth -
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO fix from Alex Williamson: "Fix deadlock in mbochs sample driver (Alexey Khoroshilov)" * tag 'vfio-v4.18-rc5' of git://github.com/awilliam/linux-vfio: sample: vfio-mdev: avoid deadlock in mdev_access()
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - update Kbuild and Kconfig documents - sanitize -I compiler option handling - update extract-vmlinux script to recognize LZ4 and ZSTD - fix tools Makefiles - update tags.sh to handle __ro_after_init - suppress warnings in case getconf does not recognize LFS_* parameters * tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: suppress warnings from 'getconf LFS_*' scripts/tags.sh: add __ro_after_init tools: build: Use HOSTLDFLAGS with fixdep tools: build: Fixup host c flags tools build: fix # escaping in .cmd files for future Make scripts: teach extract-vmlinux about LZ4 and ZSTD kbuild: remove duplicated comments about PHONY kbuild: .PHONY is not a variable, but PHONY is kbuild: do not drop -I without parameter kbuild: document the KBUILD_KCONFIG env. variable kconfig: update user kconfig tools doc. kbuild: delete INSTALL_FW_PATH from kbuild documentation kbuild: update ARCH alias info for sparc kbuild: update ARCH alias info for sh
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Catalin's out enjoying the sunshine, so I'm sending the fixes for a couple of weeks (although there hopefully won't be any more!). We've got a revert of a previous fix because it broke the build with some distro toolchains and a preemption fix when detemining whether or not the SIMD unit is in use. Summary: - Revert back to the 'linux' target for LD, as 'elf' breaks some distributions - Fix preemption race when testing whether the vector unit is in use or not" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: neon: Fix function may_use_simd() return error status Revert "arm64: Use aarch64elf and aarch64elfb emulation mode variants"
-
